diff options
Diffstat (limited to 'drivers/serial/amba-pl011.c')
-rw-r--r-- | drivers/serial/amba-pl011.c | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 1ff629c7475..89d7bd3eaee 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -49,7 +49,7 @@ #include <linux/serial.h> #include <asm/io.h> -#include <asm/irq.h> +#include <asm/sizes.h> #include <asm/hardware/amba.h> #include <asm/hardware/clock.h> #include <asm/hardware/amba_serial.h> @@ -62,7 +62,8 @@ #define AMBA_ISR_PASS_LIMIT 256 -#define UART_DUMMY_RSR_RX 256 +#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) +#define UART_DUMMY_DR_RX (1 << 16) /* * We wrap our port structure around the generic uart_port. @@ -115,7 +116,7 @@ pl011_rx_chars(struct uart_amba_port *uap) #endif { struct tty_struct *tty = uap->port.info->tty; - unsigned int status, ch, flag, rsr, max_count = 256; + unsigned int status, ch, flag, max_count = 256; status = readw(uap->port.membase + UART01x_FR); while ((status & UART01x_FR_RXFE) == 0 && max_count--) { @@ -128,7 +129,7 @@ pl011_rx_chars(struct uart_amba_port *uap) */ } - ch = readw(uap->port.membase + UART01x_DR); + ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX; flag = TTY_NORMAL; uap->port.icount.rx++; @@ -136,34 +137,33 @@ pl011_rx_chars(struct uart_amba_port *uap) * Note that the error handling code is * out of the main execution path */ - rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; - if (unlikely(rsr & UART01x_RSR_ANY)) { - if (rsr & UART01x_RSR_BE) { - rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + if (unlikely(ch & UART_DR_ERROR)) { + if (ch & UART011_DR_BE) { + ch &= ~(UART011_DR_FE | UART011_DR_PE); uap->port.icount.brk++; if (uart_handle_break(&uap->port)) goto ignore_char; - } else if (rsr & UART01x_RSR_PE) + } else if (ch & UART011_DR_PE) uap->port.icount.parity++; - else if (rsr & UART01x_RSR_FE) + else if (ch & UART011_DR_FE) uap->port.icount.frame++; - if (rsr & UART01x_RSR_OE) + if (ch & UART011_DR_OE) uap->port.icount.overrun++; - rsr &= uap->port.read_status_mask; + ch &= uap->port.read_status_mask; - if (rsr & UART01x_RSR_BE) + if (ch & UART011_DR_BE) flag = TTY_BREAK; - else if (rsr & UART01x_RSR_PE) + else if (ch & UART011_DR_PE) flag = TTY_PARITY; - else if (rsr & UART01x_RSR_FE) + else if (ch & UART011_DR_FE) flag = TTY_FRAME; } if (uart_handle_sysrq_char(&uap->port, ch, regs)) goto ignore_char; - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); ignore_char: status = readw(uap->port.membase + UART01x_FR); @@ -475,33 +475,33 @@ pl011_set_termios(struct uart_port *port, struct termios *termios, */ uart_update_timeout(port, termios->c_cflag, baud); - port->read_status_mask = UART01x_RSR_OE; + port->read_status_mask = UART011_DR_OE | 255; if (termios->c_iflag & INPCK) - port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART01x_RSR_BE; + port->read_status_mask |= UART011_DR_BE; /* * Characters to ignore */ port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= UART01x_RSR_BE; + port->ignore_status_mask |= UART011_DR_BE; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART01x_RSR_OE; + port->ignore_status_mask |= UART011_DR_OE; } /* * Ignore all characters if CREAD is not set. */ if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_RSR_RX; + port->ignore_status_mask |= UART_DUMMY_DR_RX; if (UART_ENABLE_MS(port, termios->c_cflag)) pl011_enable_ms(port); |