diff options
Diffstat (limited to 'drivers/serial/crisv10.c')
| -rw-r--r-- | drivers/serial/crisv10.c | 1293 |
1 files changed, 434 insertions, 859 deletions
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index f523cdf4b02..a4e23cf4790 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -1,426 +1,10 @@ -/* $Id: serial.c,v 1.25 2004/09/29 10:33:49 starvik Exp $ - * +/* * Serial port driver for the ETRAX 100LX chip * - * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Axis Communications AB + * Copyright (C) 1998-2007 Axis Communications AB * * Many, many authors. Based once upon a time on serial.c for 16x50. * - * $Log: serial.c,v $ - * Revision 1.25 2004/09/29 10:33:49 starvik - * Resolved a dealock when printing debug from kernel. - * - * Revision 1.24 2004/08/27 23:25:59 johana - * rs_set_termios() must call change_speed() if c_iflag has changed or - * automatic XOFF handling will be enabled and transmitter will stop - * if 0x13 is received. - * - * Revision 1.23 2004/08/24 06:57:13 starvik - * More whitespace cleanup - * - * Revision 1.22 2004/08/24 06:12:20 starvik - * Whitespace cleanup - * - * Revision 1.20 2004/05/24 12:00:20 starvik - * Big merge of stuff from Linux 2.4 (e.g. manual mode for the serial port). - * - * Revision 1.19 2004/05/17 13:12:15 starvik - * Kernel console hook - * Big merge from Linux 2.4 still pending. - * - * Revision 1.18 2003/10/28 07:18:30 starvik - * Compiles with debug info - * - * Revision 1.17 2003/07/04 08:27:37 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.16 2003/06/13 10:05:19 johana - * Help the user to avoid trouble by: - * Forcing mixed mode for status/control lines if not all pins are used. - * - * Revision 1.15 2003/06/13 09:43:01 johana - * Merged in the following changes from os/linux/arch/cris/drivers/serial.c - * + some minor changes to reduce diff. - * - * Revision 1.49 2003/05/30 11:31:54 johana - * Merged in change-branch--serial9bit that adds CMSPAR support for sticky - * parity (mark/space) - * - * Revision 1.48 2003/05/30 11:03:57 johana - * Implemented rs_send_xchar() by disabling the DMA and writing manually. - * Added e100_disable_txdma_channel() and e100_enable_txdma_channel(). - * Fixed rs_throttle() and rs_unthrottle() to properly call rs_send_xchar - * instead of setting info->x_char and check the CRTSCTS flag before - * controlling the rts pin. - * - * Revision 1.14 2003/04/09 08:12:44 pkj - * Corrected typo changes made upstream. - * - * Revision 1.13 2003/04/09 05:20:47 starvik - * Merge of Linux 2.5.67 - * - * Revision 1.11 2003/01/22 06:48:37 starvik - * Fixed warnings issued by GCC 3.2.1 - * - * Revision 1.9 2002/12/13 09:07:47 starvik - * Alert user that RX_TIMEOUT_TICKS==0 doesn't work - * - * Revision 1.8 2002/12/11 13:13:57 starvik - * Added arch/ to v10 specific includes - * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) - * - * Revision 1.7 2002/12/06 07:13:57 starvik - * Corrected work queue stuff - * Removed CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST - * - * Revision 1.6 2002/11/21 07:17:46 starvik - * Change static inline to extern inline where otherwise outlined with gcc-3.2 - * - * Revision 1.5 2002/11/14 15:59:49 starvik - * Linux 2.5 port of the latest serial driver from 2.4. The work queue stuff - * probably doesn't work yet. - * - * Revision 1.42 2002/11/05 09:08:47 johana - * Better implementation of rs_stop() and rs_start() that uses the XOFF - * register to start/stop transmission. - * change_speed() also initilises XOFF register correctly so that - * auto_xoff is enabled when IXON flag is set by user. - * This gives fast XOFF response times. - * - * Revision 1.41 2002/11/04 18:40:57 johana - * Implemented rs_stop() and rs_start(). - * Simple tests using hwtestserial indicates that this should be enough - * to make it work. - * - * Revision 1.40 2002/10/14 05:33:18 starvik - * RS-485 uses fast timers even if SERIAL_FAST_TIMER is disabled - * - * Revision 1.39 2002/09/30 21:00:57 johana - * Support for CONFIG_ETRAX_SERx_DTR_RI_DSR_CD_MIXED where the status and - * control pins can be mixed between PA and PB. - * If no serial port uses MIXED old solution is used - * (saves a few bytes and cycles). - * control_pins struct uses masks instead of bit numbers. - * Corrected dummy values and polarity in line_info() so - * /proc/tty/driver/serial is now correct. - * (the E100_xxx_GET() macros is really active low - perhaps not obvious) - * - * Revision 1.38 2002/08/23 11:01:36 starvik - * Check that serial port is enabled in all interrupt handlers to avoid - * restarts of DMA channels not assigned to serial ports - * - * Revision 1.37 2002/08/13 13:02:37 bjornw - * Removed some warnings because of unused code - * - * Revision 1.36 2002/08/08 12:50:01 starvik - * Serial interrupt is shared with synchronous serial port driver - * - * Revision 1.35 2002/06/03 10:40:49 starvik - * Increased RS-485 RTS toggle timer to 2 characters - * - * Revision 1.34 2002/05/28 18:59:36 johana - * Whitespace and comment fixing to be more like etrax100ser.c 1.71. - * - * Revision 1.33 2002/05/28 17:55:43 johana - * RS-485 uses FAST_TIMER if enabled, and starts a short (one char time) - * timer from tranismit_chars (interrupt context). - * The timer toggles RTS in interrupt context when expired giving minimum - * latencies. - * - * Revision 1.32 2002/05/22 13:58:00 johana - * Renamed rs_write() to raw_write() and made it inline. - * New rs_write() handles RS-485 if configured and enabled - * (moved code from e100_write_rs485()). - * RS-485 ioctl's uses copy_from_user() instead of verify_area(). - * - * Revision 1.31 2002/04/22 11:20:03 johana - * Updated copyright years. - * - * Revision 1.30 2002/04/22 09:39:12 johana - * RS-485 support compiles. - * - * Revision 1.29 2002/01/14 16:10:01 pkj - * Allocate the receive buffers dynamically. The static 4kB buffer was - * too small for the peaks. This means that we can get rid of the extra - * buffer and the copying to it. It also means we require less memory - * under normal operations, but can use more when needed (there is a - * cap at 64kB for safety reasons). If there is no memory available - * we panic(), and die a horrible death... - * - * Revision 1.28 2001/12/18 15:04:53 johana - * Cleaned up write_rs485() - now it works correctly without padding extra - * char. - * Added sane default initialisation of rs485. - * Added #ifdef around dummy variables. - * - * Revision 1.27 2001/11/29 17:00:41 pkj - * 2kB seems to be too small a buffer when using 921600 bps, - * so increase it to 4kB (this was already done for the elinux - * version of the serial driver). - * - * Revision 1.26 2001/11/19 14:20:41 pkj - * Minor changes to comments and unused code. - * - * Revision 1.25 2001/11/12 20:03:43 pkj - * Fixed compiler warnings. - * - * Revision 1.24 2001/11/12 15:10:05 pkj - * Total redesign of the receiving part of the serial driver. - * Uses eight chained descriptors to write to a 4kB buffer. - * This data is then serialised into a 2kB buffer. From there it - * is copied into the TTY's flip buffers when they become available. - * A lot of copying, and the sizes of the buffers might need to be - * tweaked, but all in all it should work better than the previous - * version, without the need to modify the TTY code in any way. - * Also note that erroneous bytes are now correctly marked in the - * flag buffers (instead of always marking the first byte). - * - * Revision 1.23 2001/10/30 17:53:26 pkj - * * Set info->uses_dma to 0 when a port is closed. - * * Mark the timer1 interrupt as a fast one (SA_INTERRUPT). - * * Call start_flush_timer() in start_receive() if - * CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is defined. - * - * Revision 1.22 2001/10/30 17:44:03 pkj - * Use %lu for received and transmitted counters in line_info(). - * - * Revision 1.21 2001/10/30 17:40:34 pkj - * Clean-up. The only change to functionality is that - * CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS(=5) is used instead of - * MAX_FLUSH_TIME(=8). - * - * Revision 1.20 2001/10/30 15:24:49 johana - * Added char_time stuff from 2.0 driver. - * - * Revision 1.19 2001/10/30 15:23:03 johana - * Merged with 1.13.2 branch + fixed indentation - * and changed CONFIG_ETRAX100_XYS to CONFIG_ETRAX_XYZ - * - * Revision 1.18 2001/09/24 09:27:22 pkj - * Completed ext_baud_table[] in cflag_to_baud() and cflag_to_etrax_baud(). - * - * Revision 1.17 2001/08/24 11:32:49 ronny - * More fixes for the CONFIG_ETRAX_SERIAL_PORT0 define. - * - * Revision 1.16 2001/08/24 07:56:22 ronny - * Added config ifdefs around ser0 irq requests. - * - * Revision 1.15 2001/08/16 09:10:31 bjarne - * serial.c - corrected the initialization of rs_table, the wrong defines - * where used. - * Corrected a test in timed_flush_handler. - * Changed configured to enabled. - * serial.h - Changed configured to enabled. - * - * Revision 1.14 2001/08/15 07:31:23 bjarne - * Introduced two new members to the e100_serial struct. - * configured - Will be set to 1 if the port has been configured in .config - * uses_dma - Should be set to 1 if the port uses DMA. Currently it is set - * to 1 - * when a port is opened. This is used to limit the DMA interrupt - * routines to only manipulate DMA channels actually used by the - * serial driver. - * - * Revision 1.13.2.2 2001/10/17 13:57:13 starvik - * Receiver was broken by the break fixes - * - * Revision 1.13.2.1 2001/07/20 13:57:39 ronny - * Merge with new stuff from etrax100ser.c. Works but haven't checked stuff - * like break handling. - * - * Revision 1.13 2001/05/09 12:40:31 johana - * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h - * - * Revision 1.12 2001/04/19 12:23:07 bjornw - * CONFIG_RS485 -> CONFIG_ETRAX_RS485 - * - * Revision 1.11 2001/04/05 14:29:48 markusl - * Updated according to review remarks i.e. - * -Use correct types in port structure to avoid compiler warnings - * -Try to use IO_* macros whenever possible - * -Open should never return -EBUSY - * - * Revision 1.10 2001/03/05 13:14:07 bjornw - * Another spelling fix - * - * Revision 1.9 2001/02/23 13:46:38 bjornw - * Spellling check - * - * Revision 1.8 2001/01/23 14:56:35 markusl - * Made use of ser1 optional - * Needed by USB - * - * Revision 1.7 2001/01/19 16:14:48 perf - * Added kernel options for serial ports 234. - * Changed option names from CONFIG_ETRAX100_XYZ to CONFIG_ETRAX_XYZ. - * - * Revision 1.6 2000/11/22 16:36:09 bjornw - * Please marketing by using the correct case when spelling Etrax. - * - * Revision 1.5 2000/11/21 16:43:37 bjornw - * Fixed so it compiles under CONFIG_SVINTO_SIM - * - * Revision 1.4 2000/11/15 17:34:12 bjornw - * Added a timeout timer for flushing input channels. The interrupt-based - * fast flush system should be easy to merge with this later (works the same - * way, only with an irq instead of a system timer_list) - * - * Revision 1.3 2000/11/13 17:19:57 bjornw - * * Incredibly, this almost complete rewrite of serial.c worked (at least - * for output) the first time. - * - * Items worth noticing: - * - * No Etrax100 port 1 workarounds (does only compile on 2.4 anyway now) - * RS485 is not ported (why can't it be done in userspace as on x86 ?) - * Statistics done through async_icount - if any more stats are needed, - * that's the place to put them or in an arch-dep version of it. - * timeout_interrupt and the other fast timeout stuff not ported yet - * There be dragons in this 3k+ line driver - * - * Revision 1.2 2000/11/10 16:50:28 bjornw - * First shot at a 2.4 port, does not compile totally yet - * - * Revision 1.1 2000/11/10 16:47:32 bjornw - * Added verbatim copy of rev 1.49 etrax100ser.c from elinux - * - * Revision 1.49 2000/10/30 15:47:14 tobiasa - * Changed version number. - * - * Revision 1.48 2000/10/25 11:02:43 johana - * Changed %ul to %lu in printf's - * - * Revision 1.47 2000/10/18 15:06:53 pkj - * Compile correctly with CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST and - * CONFIG_ETRAX_SERIAL_PROC_ENTRY together. - * Some clean-up of the /proc/serial file. - * - * Revision 1.46 2000/10/16 12:59:40 johana - * Added CONFIG_ETRAX_SERIAL_PROC_ENTRY for statistics and debug info. - * - * Revision 1.45 2000/10/13 17:10:59 pkj - * Do not flush DMAs while flipping TTY buffers. - * - * Revision 1.44 2000/10/13 16:34:29 pkj - * Added a delay in ser_interrupt() for 2.3ms when an error is detected. - * We do not know why this delay is required yet, but without it the - * irmaflash program does not work (this was the program that needed - * the ser_interrupt() to be needed in the first place). This should not - * affect normal use of the serial ports. - * - * Revision 1.43 2000/10/13 16:30:44 pkj - * New version of the fast flush of serial buffers code. This time - * it is localized to the serial driver and uses a fast timer to - * do the work. - * - * Revision 1.42 2000/10/13 14:54:26 bennyo - * Fix for switching RTS when using rs485 - * - * Revision 1.41 2000/10/12 11:43:44 pkj - * Cleaned up a number of comments. - * - * Revision 1.40 2000/10/10 11:58:39 johana - * Made RS485 support generic for all ports. - * Toggle rts in interrupt if no delay wanted. - * WARNING: No true transmitter empty check?? - * Set d_wait bit when sending data so interrupt is delayed until - * fifo flushed. (Fix tcdrain() problem) - * - * Revision 1.39 2000/10/04 16:08:02 bjornw - * * Use virt_to_phys etc. for DMA addresses - * * Removed CONFIG_FLUSH_DMA_FAST hacks - * * Indentation fix - * - * Revision 1.38 2000/10/02 12:27:10 mattias - * * added variable used when using fast flush on serial dma. - * (CONFIG_FLUSH_DMA_FAST) - * - * Revision 1.37 2000/09/27 09:44:24 pkj - * Uncomment definition of SERIAL_HANDLE_EARLY_ERRORS. - * - * Revision 1.36 2000/09/20 13:12:52 johana - * Support for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS: - * Number of timer ticks between flush of receive fifo (1 tick = 10ms). - * Try 0-3 for low latency applications. Approx 5 for high load - * applications (e.g. PPP). Maybe this should be more adaptive some day... - * - * Revision 1.35 2000/09/20 10:36:08 johana - * Typo in get_lsr_info() - * - * Revision 1.34 2000/09/20 10:29:59 johana - * Let rs_chars_in_buffer() check fifo content as well. - * get_lsr_info() might work now (not tested). - * Easier to change the port to debug. - * - * Revision 1.33 2000/09/13 07:52:11 torbjore - * Support RS485 - * - * Revision 1.32 2000/08/31 14:45:37 bjornw - * After sending a break we need to reset the transmit DMA channel - * - * Revision 1.31 2000/06/21 12:13:29 johana - * Fixed wait for all chars sent when closing port. - * (Used to always take 1 second!) - * Added shadows for directions of status/ctrl signals. - * - * Revision 1.30 2000/05/29 16:27:55 bjornw - * Simulator ifdef moved a bit - * - * Revision 1.29 2000/05/09 09:40:30 mattias - * * Added description of dma registers used in timeout_interrupt - * * Removed old code - * - * Revision 1.28 2000/05/08 16:38:58 mattias - * * Bugfix for flushing fifo in timeout_interrupt - * Problem occurs when bluetooth stack waits for a small number of bytes - * containing an event acknowledging free buffers in bluetooth HW - * As before, data was stuck in fifo until more data came on uart and - * flushed it up to the stack. - * - * Revision 1.27 2000/05/02 09:52:28 jonasd - * Added fix for peculiar etrax behaviour when eop is forced on an empty - * fifo. This is used when flashing the IRMA chip. Disabled by default. - * - * Revision 1.26 2000/03/29 15:32:02 bjornw - * 2.0.34 updates - * - * Revision 1.25 2000/02/16 16:59:36 bjornw - * * Receive DMA directly into the flip-buffer, eliminating an intermediary - * receive buffer and a memcpy. Will avoid some overruns. - * * Error message on debug port if an overrun or flip buffer overrun occurs. - * * Just use the first byte in the flag flip buffer for errors. - * * Check for timeout on the serial ports only each 5/100 s, not 1/100. - * - * Revision 1.24 2000/02/09 18:02:28 bjornw - * * Clear serial errors (overrun, framing, parity) correctly. Before, the - * receiver would get stuck if an error occurred and we did not restart - * the input DMA. - * * Cosmetics (indentation, some code made into inlines) - * * Some more debug options - * * Actually shut down the serial port (DMA irq, DMA reset, receiver stop) - * when the last open is closed. Corresponding fixes in startup(). - * * rs_close() "tx FIFO wait" code moved into right place, bug & -> && fixed - * and make a special case out of port 1 (R_DMA_CHx_STATUS is broken for that) - * * e100_disable_rx/enable_rx just disables/enables the receiver, not RTS - * - * Revision 1.23 2000/01/24 17:46:19 johana - * Wait for flush of DMA/FIFO when closing port. - * - * Revision 1.22 2000/01/20 18:10:23 johana - * Added TIOCMGET ioctl to return modem status. - * Implemented modem status/control that works with the extra signals - * (DTR, DSR, RI,CD) as well. - * 3 different modes supported: - * ser0 on PB (Bundy), ser1 on PB (Lisa) and ser2 on PA (Bundy) - * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when - * closing the last filehandle, NASTY!. - * Added break generation, not tested though! - * Use IRQF_SHARED when request_irq() for ser2 and ser3 (shared with) par0 and par1. - * You can't use them at the same time (yet..), but you can hopefully switch - * between ser2/par0, ser3/par1 with the same kernel config. - * Replaced some magic constants with defines - * - * */ static char *serial_version = "$Revision: 1.25 $"; @@ -446,6 +30,7 @@ static char *serial_version = "$Revision: 1.25 $"; #include <asm/io.h> #include <asm/irq.h> +#include <asm/dma.h> #include <asm/system.h> #include <linux/delay.h> @@ -454,8 +39,9 @@ static char *serial_version = "$Revision: 1.25 $"; /* non-arch dependent serial structures are in linux/serial.h */ #include <linux/serial.h> /* while we keep our own stuff (struct e100_serial) in a local .h file */ -#include "serial.h" +#include "crisv10.h" #include <asm/fasttimer.h> +#include <asm/arch/io_interface_mux.h> #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER #ifndef CONFIG_ETRAX_FAST_TIMER @@ -504,18 +90,6 @@ struct tty_driver *serial_driver; from eLinux */ #define SERIAL_HANDLE_EARLY_ERRORS -/* Defined and used in n_tty.c, but we need it here as well */ -#define TTY_THRESHOLD_THROTTLE 128 - -/* Due to buffersizes and threshold values, our SERIAL_DESCR_BUF_SIZE - * must not be to high or flow control won't work if we leave it to the tty - * layer so we have our own throttling in flush_to_flip - * TTY_FLIPBUF_SIZE=512, - * TTY_THRESHOLD_THROTTLE/UNTHROTTLE=128 - * BUF_SIZE can't be > 128 - */ -#define CRIS_BUF_SIZE 512 - /* Currently 16 descriptors x 128 bytes = 2048 bytes */ #define SERIAL_DESCR_BUF_SIZE 256 @@ -588,13 +162,13 @@ unsigned long timer_data_to_ns(unsigned long timer_data); static void change_speed(struct e100_serial *info); static void rs_throttle(struct tty_struct * tty); static void rs_wait_until_sent(struct tty_struct *tty, int timeout); -static int rs_write(struct tty_struct * tty, int from_user, - const unsigned char *buf, int count); +static int rs_write(struct tty_struct *tty, + const unsigned char *buf, int count); #ifdef CONFIG_ETRAX_RS485 -static int e100_write_rs485(struct tty_struct * tty, int from_user, - const unsigned char *buf, int count); +static int e100_write_rs485(struct tty_struct *tty, + const unsigned char *buf, int count); #endif -static int get_lsr_info(struct e100_serial * info, unsigned int *value); +static int get_lsr_info(struct e100_serial *info, unsigned int *value); #define DEF_BAUD 115200 /* 115.2 kbit/s */ @@ -679,20 +253,39 @@ static struct e100_serial rs_table[] = { .rx_ctrl = DEF_RX, .tx_ctrl = DEF_TX, .iseteop = 2, + .dma_owner = dma_ser0, + .io_if = if_serial_0, #ifdef CONFIG_ETRAX_SERIAL_PORT0 .enabled = 1, #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT .dma_out_enabled = 1, + .dma_out_nbr = SER0_TX_DMA_NBR, + .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 0 dma tr", #else .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, #endif #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN .dma_in_enabled = 1, + .dma_in_nbr = SER0_RX_DMA_NBR, + .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 0 dma rec", #else - .dma_in_enabled = 0 + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, #endif #else .enabled = 0, + .io_if_description = NULL, .dma_out_enabled = 0, .dma_in_enabled = 0 #endif @@ -714,20 +307,42 @@ static struct e100_serial rs_table[] = { .rx_ctrl = DEF_RX, .tx_ctrl = DEF_TX, .iseteop = 3, + .dma_owner = dma_ser1, + .io_if = if_serial_1, #ifdef CONFIG_ETRAX_SERIAL_PORT1 .enabled = 1, + .io_if_description = "ser1", #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT .dma_out_enabled = 1, + .dma_out_nbr = SER1_TX_DMA_NBR, + .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 1 dma tr", #else .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, #endif #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN .dma_in_enabled = 1, + .dma_in_nbr = SER1_RX_DMA_NBR, + .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 1 dma rec", #else - .dma_in_enabled = 0 + .dma_in_enabled = 0, + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, #endif #else .enabled = 0, + .io_if_description = NULL, + .dma_in_irq_nbr = 0, .dma_out_enabled = 0, .dma_in_enabled = 0 #endif @@ -748,20 +363,40 @@ static struct e100_serial rs_table[] = { .rx_ctrl = DEF_RX, .tx_ctrl = DEF_TX, .iseteop = 0, + .dma_owner = dma_ser2, + .io_if = if_serial_2, #ifdef CONFIG_ETRAX_SERIAL_PORT2 .enabled = 1, + .io_if_description = "ser2", #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT .dma_out_enabled = 1, + .dma_out_nbr = SER2_TX_DMA_NBR, + .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 2 dma tr", #else .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, #endif #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN .dma_in_enabled = 1, + .dma_in_nbr = SER2_RX_DMA_NBR, + .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 2 dma rec", #else - .dma_in_enabled = 0 + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, #endif #else .enabled = 0, + .io_if_description = NULL, .dma_out_enabled = 0, .dma_in_enabled = 0 #endif @@ -782,20 +417,40 @@ static struct e100_serial rs_table[] = { .rx_ctrl = DEF_RX, .tx_ctrl = DEF_TX, .iseteop = 1, + .dma_owner = dma_ser3, + .io_if = if_serial_3, #ifdef CONFIG_ETRAX_SERIAL_PORT3 .enabled = 1, + .io_if_description = "ser3", #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT .dma_out_enabled = 1, + .dma_out_nbr = SER3_TX_DMA_NBR, + .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 3 dma tr", #else .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, #endif #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN .dma_in_enabled = 1, + .dma_in_nbr = SER3_RX_DMA_NBR, + .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 3 dma rec", #else - .dma_in_enabled = 0 + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL #endif #else .enabled = 0, + .io_if_description = NULL, .dma_out_enabled = 0, .dma_in_enabled = 0 #endif @@ -1416,12 +1071,11 @@ e100_dtr(struct e100_serial *info, int set) { unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); *e100_modem_pins[info->line].dtr_shadow &= ~mask; *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; - restore_flags(flags); + local_irq_restore(flags); } #ifdef SERIAL_DEBUG_IO @@ -1440,12 +1094,11 @@ e100_rts(struct e100_serial *info, int set) { #ifndef CONFIG_SVINTO_SIM unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); info->rx_ctrl &= ~E100_RTS_MASK; info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ info->port[REG_REC_CTRL] = info->rx_ctrl; - restore_flags(flags); + local_irq_restore(flags); #ifdef SERIAL_DEBUG_IO printk("ser%i rts %i\n", info->line, set); #endif @@ -1463,12 +1116,11 @@ e100_ri_out(struct e100_serial *info, int set) unsigned char mask = e100_modem_pins[info->line].ri_mask; unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); *e100_modem_pins[info->line].ri_shadow &= ~mask; *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; - restore_flags(flags); + local_irq_restore(flags); } #endif } @@ -1481,12 +1133,11 @@ e100_cd_out(struct e100_serial *info, int set) unsigned char mask = e100_modem_pins[info->line].cd_mask; unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); *e100_modem_pins[info->line].cd_shadow &= ~mask; *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; - restore_flags(flags); + local_irq_restore(flags); } #endif } @@ -1560,8 +1211,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info) /* Disable output DMA channel for the serial port in question * ( set to something other then serialX) */ - save_flags(flags); - cli(); + local_irq_save(flags); DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); if (info->line == 0) { if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == @@ -1589,7 +1239,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info) } } *R_GEN_CONFIG = genconfig_shadow; - restore_flags(flags); + local_irq_restore(flags); } @@ -1597,8 +1247,7 @@ static void e100_enable_txdma_channel(struct e100_serial *info) { unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); /* Enable output DMA channel for the serial port in question */ if (info->line == 0) { @@ -1615,7 +1264,7 @@ static void e100_enable_txdma_channel(struct e100_serial *info) genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); } *R_GEN_CONFIG = genconfig_shadow; - restore_flags(flags); + local_irq_restore(flags); } static void e100_disable_rxdma_channel(struct e100_serial *info) @@ -1625,8 +1274,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info) /* Disable input DMA channel for the serial port in question * ( set to something other then serialX) */ - save_flags(flags); - cli(); + local_irq_save(flags); if (info->line == 0) { if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == IO_STATE(R_GEN_CONFIG, dma7, serial0)) { @@ -1653,7 +1301,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info) } } *R_GEN_CONFIG = genconfig_shadow; - restore_flags(flags); + local_irq_restore(flags); } @@ -1661,8 +1309,7 @@ static void e100_enable_rxdma_channel(struct e100_serial *info) { unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); /* Enable input DMA channel for the serial port in question */ if (info->line == 0) { genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); @@ -1678,7 +1325,7 @@ static void e100_enable_rxdma_channel(struct e100_serial *info) genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); } *R_GEN_CONFIG = genconfig_shadow; - restore_flags(flags); + local_irq_restore(flags); } #ifdef SERIAL_HANDLE_EARLY_ERRORS @@ -1785,7 +1432,7 @@ e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r) } static int -e100_write_rs485(struct tty_struct *tty, int from_user, +e100_write_rs485(struct tty_struct *tty, const unsigned char *buf, int count) { struct e100_serial * info = (struct e100_serial *)tty->driver_data; @@ -1798,7 +1445,7 @@ e100_write_rs485(struct tty_struct *tty, int from_user, */ info->rs485.enabled = 1; /* rs_write now deals with RS485 if enabled */ - count = rs_write(tty, from_user, buf, count); + count = rs_write(tty, buf, count); info->rs485.enabled = old_enabled; return count; } @@ -1836,7 +1483,7 @@ rs_stop(struct tty_struct *tty) unsigned long flags; unsigned long xoff; - save_flags(flags); cli(); + local_irq_save(flags); DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", CIRC_CNT(info->xmit.head, info->xmit.tail,SERIAL_XMIT_SIZE))); @@ -1848,7 +1495,7 @@ rs_stop(struct tty_struct *tty) } *((unsigned long *)&info->port[REG_XOFF]) = xoff; - restore_flags(flags); + local_irq_restore(flags); } } @@ -1860,7 +1507,7 @@ rs_start(struct tty_struct *tty) unsigned long flags; unsigned long xoff; - save_flags(flags); cli(); + local_irq_save(flags); DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", CIRC_CNT(info->xmit.head, info->xmit.tail,SERIAL_XMIT_SIZE))); @@ -1875,7 +1522,7 @@ rs_start(struct tty_struct *tty) info->xmit.head != info->xmit.tail && info->xmit.buf) e100_enable_serial_tx_ready_irq(info); - restore_flags(flags); + local_irq_restore(flags); } } @@ -2055,8 +1702,7 @@ static int serial_fast_timer_expired = 0; static void flush_timeout_function(unsigned long data); #define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ unsigned long timer_flags; \ - save_flags(timer_flags); \ - cli(); \ + local_irq_save(timer_flags); \ if (fast_timers[info->line].function == NULL) { \ serial_fast_timer_started++; \ TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ @@ -2070,7 +1716,7 @@ static void flush_timeout_function(unsigned long data); else { \ TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ } \ - restore_flags(timer_flags); \ + local_irq_restore(timer_flags); \ } #define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) @@ -2099,8 +1745,7 @@ append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) { unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); if (!info->first_recv_buffer) info->first_recv_buffer = buffer; @@ -2113,7 +1758,7 @@ append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) if (info->recv_cnt > info->max_recv_cnt) info->max_recv_cnt = info->recv_cnt; - restore_flags(flags); + local_irq_restore(flags); } static int @@ -2133,11 +1778,7 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl info->icount.rx++; } else { struct tty_struct *tty = info->tty; - *tty->flip.char_buf_ptr = data; - *tty->flip.flag_buf_ptr = flag; - tty->flip.flag_buf_ptr++; - tty->flip.char_buf_ptr++; - tty->flip.count++; + tty_insert_flip_char(tty, data, flag); info->icount.rx++; } @@ -2322,7 +1963,6 @@ start_receive(struct e100_serial *info) */ return; #endif - info->tty->flip.count = 0; if (info->uses_dma_in) { /* reset the input dma channel to be sure it works */ @@ -2484,32 +2124,20 @@ static void flush_to_flip_buffer(struct e100_serial *info) { struct tty_struct *tty; struct etrax_recv_buffer *buffer; - unsigned int length; unsigned long flags; - int max_flip_size; - - if (!info->first_recv_buffer) - return; - save_flags(flags); - cli(); + local_irq_save(flags); + tty = info->tty; - if (!(tty = info->tty)) { - restore_flags(flags); + if (!tty) { + local_irq_restore(flags); return; } while ((buffer = info->first_recv_buffer) != NULL) { unsigned int count = buffer->length; - count = tty_buffer_request_room(tty, count); - if (count == 0) /* Throttle ?? */ - break; - - if (count > 1) - tty_insert_flip_strings(tty, buffer->buffer, count - 1); - tty_insert_flip_char(tty, buffer->buffer[count-1], buffer->error); - + tty_insert_flip_string(tty, buffer->buffer, count); info->recv_cnt -= count; if (count == buffer->length) { @@ -2525,18 +2153,9 @@ static void flush_to_flip_buffer(struct e100_serial *info) if (!info->first_recv_buffer) info->last_recv_buffer = NULL; - restore_flags(flags); - - DFLIP( - if (1) { - DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx); - DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty)); - DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty)); - } + local_irq_restore(flags); - ); - - /* this includes a check for low-latency */ + /* This includes a check for low-latency */ tty_flip_buffer_push(tty); } @@ -2679,21 +2298,7 @@ struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) printk("!NO TTY!\n"); return info; } - if (tty->flip.count >= CRIS_BUF_SIZE - TTY_THRESHOLD_THROTTLE) { - /* check TTY_THROTTLED first so it indicates our state */ - if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) { - DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count)); - rs_throttle(tty); - } - } - if (tty->flip.count >= CRIS_BUF_SIZE) { - DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count); - tty->flip.work.func((void *) tty); - if (tty->flip.count >= CRIS_BUF_SIZE) { - DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count); - return info; /* if TTY_DONT_FLIP is set */ - } - } + /* Read data and status at the same time */ data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); more_data: @@ -2746,27 +2351,26 @@ more_data: DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); info->errorcode = ERRCODE_INSERT_BREAK; } else { + unsigned char data = IO_EXTRACT(R_SERIAL0_READ, + data_in, data_read); + char flag = TTY_NORMAL; if (info->errorcode == ERRCODE_INSERT_BREAK) { - info->icount.brk++; - *tty->flip.char_buf_ptr = 0; - *tty->flip.flag_buf_ptr = TTY_BREAK; - tty->flip.flag_buf_ptr++; - tty->flip.char_buf_ptr++; - tty->flip.count++; + struct tty_struct *tty = info->tty; + tty_insert_flip_char(tty, 0, flag); info->icount.rx++; } - *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { info->icount.parity++; - *tty->flip.flag_buf_ptr = TTY_PARITY; + flag = TTY_PARITY; } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { info->icount.overrun++; - *tty->flip.flag_buf_ptr = TTY_OVERRUN; + flag = TTY_OVERRUN; } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { info->icount.frame++; - *tty->flip.flag_buf_ptr = TTY_FRAME; + flag = TTY_FRAME; } + tty_insert_flip_char(tty, data, flag); info->errorcode = 0; } info->break_detected_cnt = 0; @@ -2782,16 +2386,14 @@ more_data: log_int(rdpc(), 0, 0); } ); - *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); - *tty->flip.flag_buf_ptr = 0; + tty_insert_flip_char(tty, + IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), + TTY_NORMAL); } else { DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); } - tty->flip.flag_buf_ptr++; - tty->flip.char_buf_ptr++; - tty->flip.count++; info->icount.rx++; data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { @@ -2929,7 +2531,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) if (info->x_char) { unsigned char rstat; DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); - save_flags(flags); cli(); + local_irq_save(flags); rstat = info->port[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); @@ -2938,7 +2540,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) info->x_char = 0; /* We must enable since it is disabled in ser_interrupt */ e100_enable_serial_tx_ready_irq(info); - restore_flags(flags); + local_irq_restore(flags); return; } if (info->uses_dma_out) { @@ -2946,7 +2548,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) int i; /* We only use normal tx interrupt when sending x_char */ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); - save_flags(flags); cli(); + local_irq_save(flags); rstat = info->port[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); e100_disable_serial_tx_ready_irq(info); @@ -2959,7 +2561,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) nop(); *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); - restore_flags(flags); + local_irq_restore(flags); return; } /* Normal char-by-char interrupt */ @@ -2973,7 +2575,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) } DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); /* Send a byte, rs485 timing is critical so turn of ints */ - save_flags(flags); cli(); + local_irq_save(flags); info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); info->icount.tx++; @@ -2997,7 +2599,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) /* We must enable since it is disabled in ser_interrupt */ e100_enable_serial_tx_ready_irq(info); } - restore_flags(flags); + local_irq_restore(flags); if (CIRC_CNT(info->xmit.head, info->xmit.tail, @@ -3022,7 +2624,7 @@ ser_interrupt(int irq, void *dev_id) int handled = 0; static volatile unsigned long reentered_ready_mask = 0; - save_flags(flags); cli(); + local_irq_save(flags); irq_mask1_rd = *R_IRQ_MASK1_RD; /* First handle all rx interrupts with ints disabled */ info = rs_table; @@ -3067,7 +2669,7 @@ ser_interrupt(int irq, void *dev_id) /* Unblock the serial interrupt */ *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); - sti(); + local_irq_enable(); ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ info = rs_table; for (i = 0; i < NR_PORTS; i++) { @@ -3080,11 +2682,11 @@ ser_interrupt(int irq, void *dev_id) ready_mask <<= 2; } /* handle_ser_tx_interrupt enables tr_ready interrupts */ - cli(); + local_irq_disable(); /* Handle reentered TX interrupt */ irq_mask1_rd = reentered_ready_mask; } - cli(); + local_irq_disable(); tx_started = 0; } else { unsigned long ready_mask; @@ -3100,7 +2702,7 @@ ser_interrupt(int irq, void *dev_id) } } - restore_flags(flags); + local_irq_restore(flags); return IRQ_RETVAL(handled); } /* ser_interrupt */ #endif @@ -3121,11 +2723,13 @@ ser_interrupt(int irq, void *dev_id) * them using rs_sched_event(), and they get done here. */ static void -do_softint(void *private_) +do_softint(struct work_struct *work) { - struct e100_serial *info = (struct e100_serial *) private_; + struct e100_serial *info; struct tty_struct *tty; + info = container_of(work, struct e100_serial, work); + tty = info->tty; if (!tty) return; @@ -3145,13 +2749,12 @@ startup(struct e100_serial * info) if (!xmit_page) return -ENOMEM; - save_flags(flags); - cli(); + local_irq_save(flags); /* if it was already initialized, skip this */ if (info->flags & ASYNC_INITIALIZED) { - restore_flags(flags); + local_irq_restore(flags); free_page(xmit_page); return 0; } @@ -3277,7 +2880,7 @@ startup(struct e100_serial * info) info->flags |= ASYNC_INITIALIZED; - restore_flags(flags); + local_irq_restore(flags); return 0; } @@ -3328,8 +2931,7 @@ shutdown(struct e100_serial * info) info->irq); #endif - save_flags(flags); - cli(); /* Disable interrupts */ + local_irq_save(flags); if (info->xmit.buf) { free_page((unsigned long)info->xmit.buf); @@ -3353,7 +2955,7 @@ shutdown(struct e100_serial * info) set_bit(TTY_IO_ERROR, &info->tty->flags); info->flags &= ~ASYNC_INITIALIZED; - restore_flags(flags); + local_irq_restore(flags); } @@ -3411,7 +3013,6 @@ change_speed(struct e100_serial *info) DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; } - } #endif else { @@ -3445,8 +3046,7 @@ change_speed(struct e100_serial *info) #ifndef CONFIG_SVINTO_SIM /* start with default settings and then fill in changes */ - save_flags(flags); - cli(); + local_irq_save(flags); /* 8 bit, no/even parity */ info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | @@ -3510,7 +3110,7 @@ change_speed(struct e100_serial *info) } *((unsigned long *)&info->port[REG_XOFF]) = xoff; - restore_flags(flags); + local_irq_restore(flags); #endif /* !CONFIG_SVINTO_SIM */ update_char_time(info); @@ -3538,13 +3138,12 @@ rs_flush_chars(struct tty_struct *tty) /* this protection might not exactly be necessary here */ - save_flags(flags); - cli(); + local_irq_save(flags); start_transmit(info); - restore_flags(flags); + local_irq_restore(flags); } -static int rs_raw_write(struct tty_struct * tty, int from_user, +static int rs_raw_write(struct tty_struct *tty, const unsigned char *buf, int count) { int c, ret = 0; @@ -3567,53 +3166,19 @@ static int rs_raw_write(struct tty_struct * tty, int from_user, SIMCOUT(buf, count); return count; #endif - save_flags(flags); + local_save_flags(flags); DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); - /* the cli/restore_flags pairs below are needed because the - * DMA interrupt handler moves the info->xmit values. the memcpy - * needs to be in the critical region unfortunately, because we - * need to read xmit values, memcpy, write xmit values in one - * atomic operation... this could perhaps be avoided by more clever - * design. + /* The local_irq_disable/restore_flags pairs below are needed + * because the DMA interrupt handler moves the info->xmit values. + * the memcpy needs to be in the critical region unfortunately, + * because we need to read xmit values, memcpy, write xmit values + * in one atomic operation... this could perhaps be avoided by + * more clever design. */ - if (from_user) { - mutex_lock(&tmp_buf_mutex); - while (1) { - int c1; - c = CIRC_SPACE_TO_END(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE); - if (count < c) - c = count; - if (c <= 0) - break; - - c -= copy_from_user(tmp_buf, buf, c); - if (!c) { - if (!ret) - ret = -EFAULT; - break; - } - cli(); - c1 = CIRC_SPACE_TO_END(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE); - if (c1 < c) - c = c1; - memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c); - info->xmit.head = ((info->xmit.head + c) & - (SERIAL_XMIT_SIZE-1)); - restore_flags(flags); - buf += c; - count -= c; - ret += c; - } - mutex_unlock(&tmp_buf_mutex); - } else { - cli(); + local_irq_disable(); while (count) { c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, @@ -3631,8 +3196,7 @@ static int rs_raw_write(struct tty_struct * tty, int from_user, count -= c; ret += c; } - restore_flags(flags); - } + local_irq_restore(flags); /* enable transmitter if not running, unless the tty is stopped * this does not need IRQ protection since if tr_running == 0 @@ -3651,7 +3215,7 @@ static int rs_raw_write(struct tty_struct * tty, int from_user, } /* raw_raw_write() */ static int -rs_write(struct tty_struct * tty, int from_user, +rs_write(struct tty_struct *tty, const unsigned char *buf, int count) { #if defined(CONFIG_ETRAX_RS485) @@ -3678,7 +3242,7 @@ rs_write(struct tty_struct * tty, int from_user, } #endif /* CONFIG_ETRAX_RS485 */ - count = rs_raw_write(tty, from_user, buf, count); + count = rs_raw_write(tty, buf, count); #if defined(CONFIG_ETRAX_RS485) if (info->rs485.enabled) @@ -3746,10 +3310,9 @@ rs_flush_buffer(struct tty_struct *tty) struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; - save_flags(flags); - cli(); + local_irq_save(flags); info->xmit.head = info->xmit.tail = 0; - restore_flags(flags); + local_irq_restore(flags); tty_wakeup(tty); } @@ -3767,7 +3330,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; - save_flags(flags); cli(); + local_irq_save(flags); if (info->uses_dma_out) { /* Put the DMA on hold and disable the channel */ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); @@ -3784,7 +3347,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch) DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); info->x_char = ch; e100_enable_serial_tx_ready_irq(info); - restore_flags(flags); + local_irq_restore(flags); } /* @@ -3996,21 +3559,61 @@ char *get_control_state_str(int MLines, char *s) } #endif +static void +rs_break(struct tty_struct *tty, int break_state) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (!info->port) + return; + + local_irq_save(flags); + if (break_state == -1) { + /* Go to manual mode and set the txd pin to 0 */ + /* Clear bit 7 (txd) and 6 (tr_enable) */ + info->tx_ctrl &= 0x3F; + } else { + /* Set bit 7 (txd) and 6 (tr_enable) */ + info->tx_ctrl |= (0x80 | 0x40); + } + info->port[REG_TR_CTRL] = info->tx_ctrl; + local_irq_restore(flags); +} + static int -get_modem_info(struct e100_serial * info, unsigned int *value) +rs_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) { - unsigned int result; - /* Polarity isn't verified */ -#if 0 /*def SERIAL_DEBUG_IO */ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; - printk("get_modem_info: RTS: %i DTR: %i CD: %i RI: %i DSR: %i CTS: %i\n", - E100_RTS_GET(info), - E100_DTR_GET(info), - E100_CD_GET(info), - E100_RI_GET(info), - E100_DSR_GET(info), - E100_CTS_GET(info)); -#endif + if (clear & TIOCM_RTS) + e100_rts(info, 0); + if (clear & TIOCM_DTR) + e100_dtr(info, 0); + /* Handle FEMALE behaviour */ + if (clear & TIOCM_RI) + e100_ri_out(info, 0); + if (clear & TIOCM_CD) + e100_cd_out(info, 0); + + if (set & TIOCM_RTS) + e100_rts(info, 1); + if (set & TIOCM_DTR) + e100_dtr(info, 1); + /* Handle FEMALE behaviour */ + if (set & TIOCM_RI) + e100_ri_out(info, 1); + if (set & TIOCM_CD) + e100_cd_out(info, 1); + return 0; +} + +static int +rs_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned int result; result = (!E100_RTS_GET(info) ? TIOCM_RTS : 0) @@ -4021,95 +3624,20 @@ get_modem_info(struct e100_serial * info, unsigned int *value) | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); #ifdef SERIAL_DEBUG_IO - printk("e100ser: modem state: %i 0x%08X\n", result, result); + printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n", + info->line, result, result); { char s[100]; get_control_state_str(result, s); - printk("state: %s\n", s); + printk(KERN_DEBUG "state: %s\n", s); } #endif - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} + return result; - -static int -set_modem_info(struct e100_serial * info, unsigned int cmd, - unsigned int *value) -{ - unsigned int arg; - - if (copy_from_user(&arg, value, sizeof(int))) - return -EFAULT; - - switch (cmd) { - case TIOCMBIS: - if (arg & TIOCM_RTS) { - e100_rts(info, 1); - } - if (arg & TIOCM_DTR) { - e100_dtr(info, 1); - } - /* Handle FEMALE behaviour */ - if (arg & TIOCM_RI) { - e100_ri_out(info, 1); - } - if (arg & TIOCM_CD) { - e100_cd_out(info, 1); - } - break; - case TIOCMBIC: - if (arg & TIOCM_RTS) { - e100_rts(info, 0); - } - if (arg & TIOCM_DTR) { - e100_dtr(info, 0); - } - /* Handle FEMALE behaviour */ - if (arg & TIOCM_RI) { - e100_ri_out(info, 0); - } - if (arg & TIOCM_CD) { - e100_cd_out(info, 0); - } - break; - case TIOCMSET: - e100_rts(info, arg & TIOCM_RTS); - e100_dtr(info, arg & TIOCM_DTR); - /* Handle FEMALE behaviour */ - e100_ri_out(info, arg & TIOCM_RI); - e100_cd_out(info, arg & TIOCM_CD); - break; - default: - return -EINVAL; - } - return 0; } -static void -rs_break(struct tty_struct *tty, int break_state) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (!info->port) - return; - - save_flags(flags); - cli(); - if (break_state == -1) { - /* Go to manual mode and set the txd pin to 0 */ - info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */ - } else { - info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */ - } - info->port[REG_TR_CTRL] = info->tx_ctrl; - restore_flags(flags); -} - static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) @@ -4124,49 +3652,45 @@ rs_ioctl(struct tty_struct *tty, struct file * file, } switch (cmd) { - case TIOCMGET: - return get_modem_info(info, (unsigned int *) arg); - case TIOCMBIS: - case TIOCMBIC: - case TIOCMSET: - return set_modem_info(info, cmd, (unsigned int *) arg); - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); - - case TIOCSERGSTRUCT: - if (copy_to_user((struct e100_serial *) arg, - info, sizeof(struct e100_serial))) - return -EFAULT; - return 0; + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + + case TIOCSERGSTRUCT: + if (copy_to_user((struct e100_serial *) arg, + info, sizeof(struct e100_serial))) + return -EFAULT; + return 0; #if defined(CONFIG_ETRAX_RS485) - case TIOCSERSETRS485: - { - struct rs485_control rs485ctrl; - if (copy_from_user(&rs485ctrl, (struct rs485_control*)arg, sizeof(rs485ctrl))) - return -EFAULT; + case TIOCSERSETRS485: + { + struct rs485_control rs485ctrl; + if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, + sizeof(rs485ctrl))) + return -EFAULT; - return e100_enable_rs485(tty, &rs485ctrl); - } + return e100_enable_rs485(tty, &rs485ctrl); + } - case TIOCSERWRRS485: - { - struct rs485_write rs485wr; - if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr))) - return -EFAULT; + case TIOCSERWRRS485: + { + struct rs485_write rs485wr; + if (copy_from_user(&rs485wr, (struct rs485_write *)arg, + sizeof(rs485wr))) + return -EFAULT; - return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size); - } + return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); + } #endif - default: - return -ENOIOCTLCMD; + default: + return -ENOIOCTLCMD; } return 0; } @@ -4191,46 +3715,6 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) } -/* In debugport.c - register a console write function that uses the normal - * serial driver - */ -typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len); - -extern debugport_write_function debug_write_function; - -static int rs_debug_write_function(int i, const char *buf, unsigned int len) -{ - int cnt; - int written = 0; - struct tty_struct *tty; - static int recurse_cnt = 0; - - tty = rs_table[i].tty; - if (tty) { - unsigned long flags; - if (recurse_cnt > 5) /* We skip this debug output */ - return 1; - - local_irq_save(flags); - recurse_cnt++; - local_irq_restore(flags); - do { - cnt = rs_write(tty, 0, buf + written, len); - if (cnt >= 0) { - written += cnt; - buf += cnt; - len -= cnt; - } else - len = cnt; - } while(len > 0); - local_irq_save(flags); - recurse_cnt--; - local_irq_restore(flags); - return 1; - } - return 0; -} - /* * ------------------------------------------------------------ * rs_close() @@ -4252,11 +3736,10 @@ rs_close(struct tty_struct *tty, struct file * filp) /* interrupts are disabled for this entire function */ - save_flags(flags); - cli(); + local_irq_save(flags); if (tty_hung_up_p(filp)) { - restore_flags(flags); + local_irq_restore(flags); return; } @@ -4283,7 +3766,7 @@ rs_close(struct tty_struct *tty, struct file * filp) info->count = 0; } if (info->count) { - restore_flags(flags); + local_irq_restore(flags); return; } info->flags |= ASYNC_CLOSING; @@ -4337,7 +3820,7 @@ rs_close(struct tty_struct *tty, struct file * filp) } info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); wake_up_interruptible(&info->close_wait); - restore_flags(flags); + local_irq_restore(flags); /* port closed */ @@ -4359,6 +3842,28 @@ rs_close(struct tty_struct *tty, struct file * filp) #endif } #endif + + /* + * Release any allocated DMA irq's. + */ + if (info->dma_in_enabled) { + free_irq(info->dma_in_irq_nbr, info); + cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); + info->uses_dma_in = 0; +#ifdef SERIAL_DEBUG_OPEN + printk(KERN_DEBUG "DMA irq '%s' freed\n", + info->dma_in_irq_description); +#endif + } + if (info->dma_out_enabled) { + free_irq(info->dma_out_irq_nbr, info); + cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); + info->uses_dma_out = 0; +#ifdef SERIAL_DEBUG_OPEN + printk(KERN_DEBUG "DMA irq '%s' freed\n", + info->dma_out_irq_description); +#endif + } } /* @@ -4433,8 +3938,8 @@ block_til_ready(struct tty_struct *tty, struct file * filp, */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); + wait_event_interruptible(info->close_wait, + !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART if (info->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; @@ -4472,21 +3977,19 @@ block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready before block: ttyS%d, count = %d\n", info->line, info->count); #endif - save_flags(flags); - cli(); + local_irq_save(flags); if (!tty_hung_up_p(filp)) { extra_count++; info->count--; } - restore_flags(flags); + local_irq_restore(flags); info->blocked_open++; while (1) { - save_flags(flags); - cli(); + local_irq_save(flags); /* assert RTS and DTR */ e100_rts(info, 1); e100_dtr(info, 1); - restore_flags(flags); + local_irq_restore(flags); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) { @@ -4528,6 +4031,19 @@ block_til_ready(struct tty_struct *tty, struct file * filp, return 0; } +static void +deinit_port(struct e100_serial *info) +{ + if (info->dma_out_enabled) { + cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); + free_irq(info->dma_out_irq_nbr, info); + } + if (info->dma_in_enabled) { + cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); + free_irq(info->dma_in_irq_nbr, info); + } +} + /* * This routine is called whenever a serial port is opened. * It performs the serial-specific initialization for the tty structure. @@ -4538,9 +4054,9 @@ rs_open(struct tty_struct *tty, struct file * filp) struct e100_serial *info; int retval, line; unsigned long page; + int allocated_resources = 0; /* find which port we want to open */ - line = tty->index; if (line < 0 || line >= NR_PORTS) @@ -4580,8 +4096,8 @@ rs_open(struct tty_struct *tty, struct file * filp) */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); + wait_event_interruptible(info->close_wait, + !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS); @@ -4591,12 +4107,85 @@ rs_open(struct tty_struct *tty, struct file * filp) } /* + * If DMA is enabled try to allocate the irq's. + */ + if (info->count == 1) { + allocated_resources = 1; + if (info->dma_in_enabled) { + if (request_irq(info->dma_in_irq_nbr, + rec_interrupt, + info->dma_in_irq_flags, + info->dma_in_irq_description, + info)) { + printk(KERN_WARNING "DMA irq '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_in_irq_description); + /* Make sure we never try to use DMA in */ + /* for the port again. */ + info->dma_in_enabled = 0; + } else if (cris_request_dma(info->dma_in_nbr, + info->dma_in_irq_description, + DMA_VERBOSE_ON_ERROR, + info->dma_owner)) { + free_irq(info->dma_in_irq_nbr, info); + printk(KERN_WARNING "DMA '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_in_irq_description); + /* Make sure we never try to use DMA in */ + /* for the port again. */ + info->dma_in_enabled = 0; + } +#ifdef SERIAL_DEBUG_OPEN + else + printk(KERN_DEBUG "DMA irq '%s' allocated\n", + info->dma_in_irq_description); +#endif + } + if (info->dma_out_enabled) { + if (request_irq(info->dma_out_irq_nbr, + tr_interrupt, + info->dma_out_irq_flags, + info->dma_out_irq_description, + info)) { + printk(KERN_WARNING "DMA irq '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_out_irq_description); + /* Make sure we never try to use DMA out */ + /* for the port again. */ + info->dma_out_enabled = 0; + } else if (cris_request_dma(info->dma_out_nbr, + info->dma_out_irq_description, + DMA_VERBOSE_ON_ERROR, + info->dma_owner)) { + free_irq(info->dma_out_irq_nbr, info); + printk(KERN_WARNING "DMA '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_out_irq_description); + /* Make sure we never try to use DMA out */ + /* for the port again. */ + info->dma_out_enabled = 0; + } +#ifdef SERIAL_DEBUG_OPEN + else + printk(KERN_DEBUG "DMA irq '%s' allocated\n", + info->dma_out_irq_description); +#endif + } + } + + /* * Start up the serial port */ retval = startup(info); - if (retval) + if (retval) { + if (allocated_resources) + deinit_port(info); + + /* FIXME Decrease count info->count here too? */ return retval; + } + retval = block_til_ready(tty, filp, info); if (retval) { @@ -4604,6 +4193,9 @@ rs_open(struct tty_struct *tty, struct file * filp) printk("rs_open returning after block_til_ready with %d\n", retval); #endif + if (allocated_resources) + deinit_port(info); + return retval; } @@ -4793,6 +4385,8 @@ static const struct tty_operations rs_ops = { .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, .read_proc = rs_read_proc, + .tiocmget = rs_tiocmget, + .tiocmset = rs_tiocmset }; static int __init @@ -4810,9 +4404,27 @@ rs_init(void) /* Setup the timed flush handler system */ #if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) - init_timer(&flush_timer); - flush_timer.function = timed_flush_handler; - mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); + setup_timer(&flush_timer, timed_flush_handler, 0); + mod_timer(&flush_timer, jiffies + 5); +#endif + +#if defined(CONFIG_ETRAX_RS485) +#if defined(CONFIG_ETRAX_RS485_ON_PA) + if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, + rs485_pa_bit)) { + printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " + "RS485 pin\n"); + return -EBUSY; + } +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, + rs485_port_g_bit)) { + printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " + "RS485 pin\n"); + return -EBUSY; + } +#endif #endif /* Initialize the tty_driver structure */ @@ -4839,6 +4451,16 @@ rs_init(void) /* do some initializing for the separate ports */ for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { + if (info->enabled) { + if (cris_request_io_interface(info->io_if, + info->io_if_description)) { + printk(KERN_CRIT "ETRAX100LX async serial: " + "Could not allocate IO pins for " + "%s, port %d\n", + info->io_if_description, i); + info->enabled = 0; + } + } info->uses_dma_in = 0; info->uses_dma_out = 0; info->line = i; @@ -4872,7 +4494,7 @@ rs_init(void) info->rs485.delay_rts_before_send = 0; info->rs485.enabled = 0; #endif - INIT_WORK(&info->work, do_softint, info); + INIT_WORK(&info->work, do_softint); if (info->enabled) { printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n", @@ -4890,64 +4512,17 @@ rs_init(void) #endif #ifndef CONFIG_SVINTO_SIM +#ifndef CONFIG_ETRAX_KGDB /* Not needed in simulator. May only complicate stuff. */ /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ - if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL)) - panic("irq8"); - -#ifdef CONFIG_ETRAX_SERIAL_PORT0 -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL)) - panic("irq22"); -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL)) - panic("irq23"); -#endif -#endif - -#ifdef CONFIG_ETRAX_SERIAL_PORT1 -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL)) - panic("irq24"); -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL)) - panic("irq25"); -#endif -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - /* DMA Shared with par0 (and SCSI0 and ATA) */ -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL)) - panic("irq18"); -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL)) - panic("irq19"); -#endif -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3 - /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */ -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL)) - panic("irq20"); -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL)) - panic("irq21"); -#endif -#endif + if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, + IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) + panic("%s: Failed to request irq8", __FUNCTION__); -#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST - if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED, - "fast serial dma timeout", NULL)) { - printk(KERN_CRIT "err: timer1 irq\n"); - } #endif #endif /* CONFIG_SVINTO_SIM */ - debug_write_function = rs_debug_write_function; + return 0; } |