diff options
Diffstat (limited to 'drivers/serial/mpc52xx_uart.c')
| -rw-r--r-- | drivers/serial/mpc52xx_uart.c | 119 |
1 files changed, 9 insertions, 110 deletions
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 3119fddaedb..84a35f69901 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -29,39 +29,6 @@ * kind, whether express or implied. */ -/* Platform device Usage : - * - * Since PSCs can have multiple function, the correct driver for each one - * is selected by calling mpc52xx_match_psc_function(...). The function - * handled by this driver is "uart". - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - * - * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2, - * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and - * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly - * fpr the console code : without this 1:1 mapping, at early boot time, when we - * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it - * will be mapped to. - */ - -/* OF Platform device Usage : - * - * This driver is only used for PSCs configured in uart mode. The device - * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible - * list. - * - * By default, PSC devices are enumerated in the order they are found. However - * a particular PSC number can be forces by adding 'device_no = <port#>' - * to the device node. - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - */ - #undef DEBUG #include <linux/device.h> @@ -430,34 +397,10 @@ static unsigned long mpc512x_getuartclk(void *p) return mpc5xxx_get_bus_frequency(p); } -#define DEFAULT_FIFO_SIZE 16 - -static unsigned int __init get_fifo_size(struct device_node *np, - char *fifo_name) -{ - const unsigned int *fp; - - fp = of_get_property(np, fifo_name, NULL); - if (fp) - return *fp; - - pr_warning("no %s property in %s node, defaulting to %d\n", - fifo_name, np->full_name, DEFAULT_FIFO_SIZE); - - return DEFAULT_FIFO_SIZE; -} - -#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \ - ((u32)(_base) + sizeof(struct mpc52xx_psc))) - /* Init PSC FIFO Controller */ static int __init mpc512x_psc_fifoc_init(void) { struct device_node *np; - void __iomem *psc; - unsigned int tx_fifo_size; - unsigned int rx_fifo_size; - int fifobase = 0; /* current fifo address in 32 bit words */ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-psc-fifo"); @@ -480,51 +423,6 @@ static int __init mpc512x_psc_fifoc_init(void) return -ENODEV; } - for_each_compatible_node(np, NULL, "fsl,mpc5121-psc-uart") { - tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size"); - rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size"); - - /* size in register is in 4 byte units */ - tx_fifo_size /= 4; - rx_fifo_size /= 4; - if (!tx_fifo_size) - tx_fifo_size = 1; - if (!rx_fifo_size) - rx_fifo_size = 1; - - psc = of_iomap(np, 0); - if (!psc) { - pr_err("%s: Can't map %s device\n", - __func__, np->full_name); - continue; - } - - /* FIFO space is 4KiB, check if requested size is available */ - if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) { - pr_err("%s: no fifo space available for %s\n", - __func__, np->full_name); - iounmap(psc); - /* - * chances are that another device requests less - * fifo space, so we continue. - */ - continue; - } - /* set tx and rx fifo size registers */ - out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size); - fifobase += tx_fifo_size; - out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size); - fifobase += rx_fifo_size; - - /* reset and enable the slices */ - out_be32(&FIFOC(psc)->txcmd, 0x80); - out_be32(&FIFOC(psc)->txcmd, 0x01); - out_be32(&FIFOC(psc)->rxcmd, 0x80); - out_be32(&FIFOC(psc)->rxcmd, 0x01); - - iounmap(psc); - } - return 0; } @@ -1328,14 +1226,14 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) /* Check validity & presence */ for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) - if (mpc52xx_uart_nodes[idx] == op->node) + if (mpc52xx_uart_nodes[idx] == op->dev.of_node) break; if (idx >= MPC52xx_PSC_MAXNUM) return -EINVAL; pr_debug("Found %s assigned to ttyPSC%x\n", mpc52xx_uart_nodes[idx]->full_name, idx); - uartclk = psc_ops->getuartclk(op->node); + uartclk = psc_ops->getuartclk(op->dev.of_node); if (uartclk == 0) { dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); return -EINVAL; @@ -1355,7 +1253,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) port->dev = &op->dev; /* Search for IRQ and mapbase */ - ret = of_address_to_resource(op->node, 0, &res); + ret = of_address_to_resource(op->dev.of_node, 0, &res); if (ret) return ret; @@ -1365,7 +1263,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) return -EINVAL; } - psc_ops->get_irq(port, op->node); + psc_ops->get_irq(port, op->dev.of_node); if (port->irq == NO_IRQ) { dev_dbg(&op->dev, "Could not get irq\n"); return -EINVAL; @@ -1464,15 +1362,16 @@ mpc52xx_uart_of_enumerate(void) MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); static struct of_platform_driver mpc52xx_uart_of_driver = { - .match_table = mpc52xx_uart_of_match, .probe = mpc52xx_uart_of_probe, .remove = mpc52xx_uart_of_remove, #ifdef CONFIG_PM .suspend = mpc52xx_uart_of_suspend, .resume = mpc52xx_uart_of_resume, #endif - .driver = { - .name = "mpc52xx-psc-uart", + .driver = { + .name = "mpc52xx-psc-uart", + .owner = THIS_MODULE, + .of_match_table = mpc52xx_uart_of_match, }, }; @@ -1500,7 +1399,7 @@ mpc52xx_uart_init(void) /* * Map the PSC FIFO Controller and init if on MPC512x. */ - if (psc_ops->fifoc_init) { + if (psc_ops && psc_ops->fifoc_init) { ret = psc_ops->fifoc_init(); if (ret) return ret; |