diff options
Diffstat (limited to 'drivers/serial/sh-sci.c')
-rw-r--r-- | drivers/serial/sh-sci.c | 195 |
1 files changed, 131 insertions, 64 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 8eb094c1f61..f250a610a26 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -83,16 +83,16 @@ struct sci_port { /* Interface clock */ struct clk *iclk; - /* Data clock */ - struct clk *dclk; + /* Function clock */ + struct clk *fclk; struct list_head node; struct dma_chan *chan_tx; struct dma_chan *chan_rx; #ifdef CONFIG_SERIAL_SH_SCI_DMA struct device *dma_dev; - enum sh_dmae_slave_chan_id slave_tx; - enum sh_dmae_slave_chan_id slave_rx; + unsigned int slave_tx; + unsigned int slave_rx; struct dma_async_tx_descriptor *desc_tx; struct dma_async_tx_descriptor *desc_rx[2]; dma_cookie_t cookie_tx; @@ -107,6 +107,7 @@ struct sci_port { struct work_struct work_tx; struct work_struct work_rx; struct timer_list rx_timer; + unsigned int rx_timeout; #endif }; @@ -150,7 +151,11 @@ static int sci_poll_get_char(struct uart_port *port) handle_error(port); continue; } - } while (!(status & SCxSR_RDxF(port))); + break; + } while (1); + + if (!(status & SCxSR_RDxF(port))) + return NO_POLL_CHAR; c = sci_in(port, SCxRDR); @@ -674,22 +679,22 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) struct sci_port *s = to_sci_port(port); if (s->chan_rx) { - unsigned long tout; u16 scr = sci_in(port, SCSCR); u16 ssr = sci_in(port, SCxSR); /* Disable future Rx interrupts */ - sci_out(port, SCSCR, scr & ~SCI_CTRL_FLAGS_RIE); + if (port->type == PORT_SCIFA) { + disable_irq_nosync(irq); + scr |= 0x4000; + } else { + scr &= ~SCI_CTRL_FLAGS_RIE; + } + sci_out(port, SCSCR, scr); /* Clear current interrupt */ sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); - /* Calculate delay for 1.5 DMA buffers */ - tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / - port->fifosize / 2; - dev_dbg(port->dev, "Rx IRQ: setup timeout in %lu ms\n", - tout * 1000 / HZ); - if (tout < 2) - tout = 2; - mod_timer(&s->rx_timer, jiffies + tout); + dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", + jiffies, s->rx_timeout); + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); return IRQ_HANDLED; } @@ -799,7 +804,7 @@ static int sci_notifier(struct notifier_block *self, (phase == CPUFREQ_RESUMECHANGE)) { spin_lock_irqsave(&priv->lock, flags); list_for_each_entry(sci_port, &priv->ports, node) - sci_port->port.uartclk = clk_get_rate(sci_port->dclk); + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); spin_unlock_irqrestore(&priv->lock, flags); } @@ -810,21 +815,17 @@ static void sci_clk_enable(struct uart_port *port) { struct sci_port *sci_port = to_sci_port(port); - clk_enable(sci_port->dclk); - sci_port->port.uartclk = clk_get_rate(sci_port->dclk); - - if (sci_port->iclk) - clk_enable(sci_port->iclk); + clk_enable(sci_port->iclk); + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); + clk_enable(sci_port->fclk); } static void sci_clk_disable(struct uart_port *port) { struct sci_port *sci_port = to_sci_port(port); - if (sci_port->iclk) - clk_disable(sci_port->iclk); - - clk_disable(sci_port->dclk); + clk_disable(sci_port->fclk); + clk_disable(sci_port->iclk); } static int sci_request_irq(struct sci_port *port) @@ -913,22 +914,26 @@ static void sci_dma_tx_complete(void *arg) spin_lock_irqsave(&port->lock, flags); - xmit->tail += s->sg_tx.length; + xmit->tail += sg_dma_len(&s->sg_tx); xmit->tail &= UART_XMIT_SIZE - 1; - port->icount.tx += s->sg_tx.length; + port->icount.tx += sg_dma_len(&s->sg_tx); async_tx_ack(s->desc_tx); s->cookie_tx = -EINVAL; s->desc_tx = NULL; - spin_unlock_irqrestore(&port->lock, flags); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_chars_pending(xmit)) + if (!uart_circ_empty(xmit)) { schedule_work(&s->work_tx); + } else if (port->type == PORT_SCIFA) { + u16 ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE); + } + + spin_unlock_irqrestore(&port->lock, flags); } /* Locking: called with port lock held */ @@ -972,13 +977,13 @@ static void sci_dma_rx_complete(void *arg) unsigned long flags; int count; - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); spin_lock_irqsave(&port->lock, flags); count = sci_dma_rx_push(s, tty, s->buf_len_rx); - mod_timer(&s->rx_timer, jiffies + msecs_to_jiffies(5)); + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); spin_unlock_irqrestore(&port->lock, flags); @@ -1050,6 +1055,8 @@ static void sci_submit_rx(struct sci_port *s) sci_rx_dma_release(s, true); return; } + dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, + s->cookie_rx[i], i); } s->active_rx = s->cookie_rx[0]; @@ -1107,10 +1114,10 @@ static void work_fn_rx(struct work_struct *work) return; } - dev_dbg(port->dev, "%s: cookie %d #%d\n", __func__, - s->cookie_rx[new], new); - s->active_rx = s->cookie_rx[!new]; + + dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, + s->cookie_rx[new], new, s->active_rx); } static void work_fn_tx(struct work_struct *work) @@ -1131,14 +1138,13 @@ static void work_fn_tx(struct work_struct *work) */ spin_lock_irq(&port->lock); sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg->dma_address = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + + sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + sg->offset; - sg->length = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), + sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); - sg->dma_length = sg->length; spin_unlock_irq(&port->lock); - BUG_ON(!sg->length); + BUG_ON(!sg_dma_len(sg)); desc = chan->device->device_prep_slave_sg(chan, sg, s->sg_len_tx, DMA_TO_DEVICE, @@ -1173,23 +1179,28 @@ static void work_fn_tx(struct work_struct *work) static void sci_start_tx(struct uart_port *port) { + struct sci_port *s = to_sci_port(port); unsigned short ctrl; #ifdef CONFIG_SERIAL_SH_SCI_DMA - struct sci_port *s = to_sci_port(port); - - if (s->chan_tx) { - if (!uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0) - schedule_work(&s->work_tx); - - return; + if (port->type == PORT_SCIFA) { + u16 new, scr = sci_in(port, SCSCR); + if (s->chan_tx) + new = scr | 0x8000; + else + new = scr & ~0x8000; + if (new != scr) + sci_out(port, SCSCR, new); } + if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && + s->cookie_tx < 0) + schedule_work(&s->work_tx); #endif - - /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - ctrl |= SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); + if (!s->chan_tx || port->type == PORT_SCIFA) { + /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE); + } } static void sci_stop_tx(struct uart_port *port) @@ -1198,6 +1209,8 @@ static void sci_stop_tx(struct uart_port *port) /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA) + ctrl &= ~0x8000; ctrl &= ~SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); } @@ -1208,6 +1221,8 @@ static void sci_start_rx(struct uart_port *port) /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ ctrl |= sci_in(port, SCSCR); + if (port->type == PORT_SCIFA) + ctrl &= ~0x4000; sci_out(port, SCSCR, ctrl); } @@ -1217,6 +1232,8 @@ static void sci_stop_rx(struct uart_port *port) /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA) + ctrl &= ~0x4000; ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); sci_out(port, SCSCR, ctrl); } @@ -1251,8 +1268,12 @@ static void rx_timer_fn(unsigned long arg) { struct sci_port *s = (struct sci_port *)arg; struct uart_port *port = &s->port; - u16 scr = sci_in(port, SCSCR); + + if (port->type == PORT_SCIFA) { + scr &= ~0x4000; + enable_irq(s->irqs[1]); + } sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); dev_dbg(port->dev, "DMA Rx timed out\n"); schedule_work(&s->work_rx); @@ -1339,8 +1360,7 @@ static void sci_request_dma(struct uart_port *port) sg_init_table(sg, 1); sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, (int)buf[i] & ~PAGE_MASK); - sg->dma_address = dma[i]; - sg->dma_length = sg->length; + sg_dma_address(sg) = dma[i]; } INIT_WORK(&s->work_rx, work_fn_rx); @@ -1403,8 +1423,12 @@ static void sci_shutdown(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct sci_port *s = to_sci_port(port); +#endif unsigned int status, baud, smr_val, max_baud; int t = -1; + u16 scfcr = 0; /* * earlyprintk comes here early on with port->uartclk set to zero. @@ -1427,7 +1451,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ if (port->type != PORT_SCI) - sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); + sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) @@ -1458,10 +1482,32 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, } sci_init_pins(port, termios->c_cflag); - sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0); + sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); sci_out(port, SCSCR, SCSCR_INIT(port)); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + /* + * Calculate delay for 1.5 DMA buffers: see + * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits + * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function + * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." + * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO + * sizes), but it has been found out experimentally, that this is not + * enough: the driver too often needlessly runs on a DMA timeout. 20ms + * as a minimum seem to work perfectly. + */ + if (s->chan_rx) { + s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / + port->fifosize / 2; + dev_dbg(port->dev, + "DMA Rx t-out %ums, tty t-out %u jiffies\n", + s->rx_timeout * 1000 / HZ, port->timeout); + if (s->rx_timeout < msecs_to_jiffies(20)) + s->rx_timeout = msecs_to_jiffies(20); + } +#endif + if ((termios->c_cflag & CREAD) != 0) sci_start_rx(port); } @@ -1553,10 +1599,10 @@ static struct uart_ops sci_uart_ops = { #endif }; -static void __devinit sci_init_single(struct platform_device *dev, - struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) +static int __devinit sci_init_single(struct platform_device *dev, + struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) { struct uart_port *port = &sci_port->port; @@ -1577,8 +1623,23 @@ static void __devinit sci_init_single(struct platform_device *dev, } if (dev) { - sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; - sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); + sci_port->iclk = clk_get(&dev->dev, "sci_ick"); + if (IS_ERR(sci_port->iclk)) { + sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); + if (IS_ERR(sci_port->iclk)) { + dev_err(&dev->dev, "can't get iclk\n"); + return PTR_ERR(sci_port->iclk); + } + } + + /* + * The function clock is optional, ignore it if we can't + * find it. + */ + sci_port->fclk = clk_get(&dev->dev, "sci_fck"); + if (IS_ERR(sci_port->fclk)) + sci_port->fclk = NULL; + sci_port->enable = sci_clk_enable; sci_port->disable = sci_clk_disable; port->dev = &dev->dev; @@ -1605,6 +1666,7 @@ static void __devinit sci_init_single(struct platform_device *dev, #endif memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + return 0; } #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE @@ -1754,8 +1816,11 @@ static int sci_remove(struct platform_device *dev) cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) + list_for_each_entry(p, &priv->ports, node) { uart_remove_one_port(&sci_uart_driver, &p->port); + clk_put(p->iclk); + clk_put(p->fclk); + } spin_unlock_irqrestore(&priv->lock, flags); kfree(priv); @@ -1781,7 +1846,9 @@ static int __devinit sci_probe_single(struct platform_device *dev, return 0; } - sci_init_single(dev, sciport, index, p); + ret = sci_init_single(dev, sciport, index, p); + if (ret) + return ret; ret = uart_add_one_port(&sci_uart_driver, &sciport->port); if (ret) |