diff options
Diffstat (limited to 'drivers/serial/sunzilog.c')
| -rw-r--r-- | drivers/serial/sunzilog.c | 65 |
1 files changed, 59 insertions, 6 deletions
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 2c7a66af4f5..f9a24f4ebb3 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -102,6 +102,8 @@ struct uart_sunzilog_port { #endif }; +static void sunzilog_putchar(struct uart_port *port, int ch); + #define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) #define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) @@ -996,6 +998,50 @@ static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *se return -EINVAL; } +#ifdef CONFIG_CONSOLE_POLL +static int sunzilog_get_poll_char(struct uart_port *port) +{ + unsigned char ch, r1; + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + return NO_POLL_CHAR; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + return ch; +} + +static void sunzilog_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port; + + sunzilog_putchar(&up->port, ch); +} +#endif /* CONFIG_CONSOLE_POLL */ + static struct uart_ops sunzilog_pops = { .tx_empty = sunzilog_tx_empty, .set_mctrl = sunzilog_set_mctrl, @@ -1013,6 +1059,10 @@ static struct uart_ops sunzilog_pops = { .request_port = sunzilog_request_port, .config_port = sunzilog_config_port, .verify_port = sunzilog_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sunzilog_get_poll_char, + .poll_put_char = sunzilog_put_poll_char, +#endif }; static int uart_chip_count; @@ -1180,7 +1230,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options) (sunzilog_reg.minor - 64) + con->index, con->index); /* Get firmware console settings. */ - sunserial_console_termios(con, to_of_device(up->port.dev)->node); + sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node); /* Firmware console speed is limited to 150-->38400 baud so * this hackish cflag thing is OK. @@ -1358,7 +1408,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m int keyboard_mouse = 0; int err; - if (of_find_property(op->node, "keyboard", NULL)) + if (of_find_property(op->dev.of_node, "keyboard", NULL)) keyboard_mouse = 1; /* uarts must come before keyboards/mice */ @@ -1415,7 +1465,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m sunzilog_init_hw(&up[1]); if (!keyboard_mouse) { - if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, &sunzilog_reg, up[0].port.line, false)) up->flags |= SUNZILOG_FLAG_IS_CONS; @@ -1425,7 +1475,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m rp, sizeof(struct zilog_layout)); return err; } - if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, &sunzilog_reg, up[1].port.line, false)) up->flags |= SUNZILOG_FLAG_IS_CONS; @@ -1491,8 +1541,11 @@ static const struct of_device_id zs_match[] = { MODULE_DEVICE_TABLE(of, zs_match); static struct of_platform_driver zs_driver = { - .name = "zs", - .match_table = zs_match, + .driver = { + .name = "zs", + .owner = THIS_MODULE, + .of_match_table = zs_match, + }, .probe = zs_probe, .remove = __devexit_p(zs_remove), }; |