diff options
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/8250_pci.c | 2 | ||||
-rw-r--r-- | drivers/serial/Kconfig | 4 | ||||
-rw-r--r-- | drivers/serial/bfin_5xx.c | 6 | ||||
-rw-r--r-- | drivers/serial/crisv10.c | 173 | ||||
-rw-r--r-- | drivers/serial/jsm/jsm.h | 2 | ||||
-rw-r--r-- | drivers/serial/jsm/jsm_driver.c | 1 | ||||
-rw-r--r-- | drivers/serial/max3100.c | 927 | ||||
-rw-r--r-- | drivers/serial/s3c6400.c | 1 | ||||
-rw-r--r-- | drivers/serial/samsung.c | 65 | ||||
-rw-r--r-- | drivers/serial/samsung.h | 4 | ||||
-rw-r--r-- | drivers/serial/sunsu.c | 2 |
11 files changed, 1076 insertions, 111 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 7ddff3f5508..938bc1b6c3f 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -771,8 +771,6 @@ static int pci_netmos_init(struct pci_dev *dev) } /* - * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com> - * * These chips are available with optionally one parallel port and up to * two serial ports. Unfortunately they all have the same product id. * diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 0328fd4006e..343e3a35b6a 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -854,7 +854,7 @@ config SERIAL_IMX_CONSOLE config SERIAL_UARTLITE tristate "Xilinx uartlite serial port support" - depends on PPC32 + depends on PPC32 || MICROBLAZE select SERIAL_CORE help Say Y here if you want to use the Xilinx uartlite serial controller. @@ -1340,7 +1340,7 @@ config SERIAL_NETX_CONSOLE config SERIAL_OF_PLATFORM tristate "Serial port on Open Firmware platform bus" - depends on PPC_OF + depends on PPC_OF || MICROBLAZE depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL help If you have a PowerPC based system that has serial ports diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 18ba812a4f8..d86123e0339 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -166,7 +166,7 @@ static void bfin_serial_start_tx(struct uart_port *port) struct tty_struct *tty = uart->port.info->port.tty; #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { uart->scts = 0; uart_handle_cts_change(&uart->port, uart->scts); } @@ -368,7 +368,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { uart->scts = 0; uart_handle_cts_change(&uart->port, uart->scts); } @@ -504,7 +504,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) struct circ_buf *xmit = &uart->port.info->xmit; #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { uart->scts = 0; uart_handle_cts_change(&uart->port, uart->scts); } diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 7ba7d70f04d..7be52fe288e 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $"; #include <linux/mm.h> #include <linux/slab.h> #include <linux/init.h> -#include <asm/uaccess.h> #include <linux/kernel.h> #include <linux/mutex.h> #include <linux/bitops.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> #include <asm/system.h> -#include <linux/delay.h> #include <arch/svinto.h> @@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = { #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) -static struct ktermios *serial_termios[NR_PORTS]; #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER static struct fast_timer fast_timers[NR_PORTS]; #endif @@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp) return 0; } +#ifdef CONFIG_PROC_FS /* * /proc fs routines.... */ -static int line_info(char *buf, struct e100_serial *info) +static void seq_line_info(struct seq_file *m, struct e100_serial *info) { - char stat_buf[30]; - int ret; unsigned long tmp; - ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); + seq_printf(m, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->ioport, info->irq); if (!info->ioport || (info->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; + seq_printf(m, "\n"); + return; } - stat_buf[0] = 0; - stat_buf[1] = 0; - if (!E100_RTS_GET(info)) - strcat(stat_buf, "|RTS"); - if (!E100_CTS_GET(info)) - strcat(stat_buf, "|CTS"); - if (!E100_DTR_GET(info)) - strcat(stat_buf, "|DTR"); - if (!E100_DSR_GET(info)) - strcat(stat_buf, "|DSR"); - if (!E100_CD_GET(info)) - strcat(stat_buf, "|CD"); - if (!E100_RI_GET(info)) - strcat(stat_buf, "|RI"); - - ret += sprintf(buf+ret, " baud:%d", info->baud); - - ret += sprintf(buf+ret, " tx:%lu rx:%lu", + seq_printf(m, " baud:%d", info->baud); + seq_printf(m, " tx:%lu rx:%lu", (unsigned long)info->icount.tx, (unsigned long)info->icount.rx); tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) { - ret += sprintf(buf+ret, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - } + if (tmp) + seq_printf(m, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); - ret += sprintf(buf+ret, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); + seq_printf(m, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); #if 1 if (info->port.tty) { - if (info->port.tty->stopped) - ret += sprintf(buf+ret, " stopped:%i", - (int)info->port.tty->stopped); + seq_printf(m, " stopped:%i", + (int)info->port.tty->stopped); if (info->port.tty->hw_stopped) - ret += sprintf(buf+ret, " hw_stopped:%i", - (int)info->port.tty->hw_stopped); + seq_printf(m, " hw_stopped:%i", + (int)info->port.tty->hw_stopped); } { unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) - ret += sprintf(buf+ret, " xoff_detect:1"); + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) + seq_printf(m, " xoff_detect:1"); } #endif - - - if (info->icount.frame) - ret += sprintf(buf+ret, " fe:%lu", - (unsigned long)info->icount.frame); + seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); if (info->icount.parity) - ret += sprintf(buf+ret, " pe:%lu", - (unsigned long)info->icount.parity); + seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); if (info->icount.brk) - ret += sprintf(buf+ret, " brk:%lu", - (unsigned long)info->icount.brk); + seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); if (info->icount.overrun) - ret += sprintf(buf+ret, " oe:%lu", - (unsigned long)info->icount.overrun); + seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); /* * Last thing is the RS-232 status lines */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); - return ret; + if (!E100_RTS_GET(info)) + seq_puts(m, "|RTS"); + if (!E100_CTS_GET(info)) + seq_puts(m, "|CTS"); + if (!E100_DTR_GET(info)) + seq_puts(m, "|DTR"); + if (!E100_DSR_GET(info)) + seq_puts(m, "|DSR"); + if (!E100_CD_GET(info)) + seq_puts(m, "|CD"); + if (!E100_RI_GET(info)) + seq_puts(m, "|RI"); + seq_puts(m, "\n"); } -int rs_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) + +static int crisv10_proc_show(struct seq_file *m, void *v) { - int i, len = 0, l; - off_t begin = 0; + int i; - len += sprintf(page, "serinfo:1.0 driver:%s\n", - serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + + for (i = 0; i < NR_PORTS; i++) { if (!rs_table[i].enabled) continue; - l = line_info(page + len, &rs_table[i]); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_line_info(m, &rs_table[i]); } #ifdef DEBUG_LOG_INCLUDED for (i = 0; i < debug_log_pos; i++) { - len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data)); - len += sprintf(page + len, debug_log[i].string, debug_log[i].value); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_printf(m, "%-4i %lu.%lu ", + i, debug_log[i].time, + timer_data_to_ns(debug_log[i].timer_data)); + seq_printf(m, debug_log[i].string, debug_log[i].value); } - len += sprintf(page + len, "debug_log %i/%i %li bytes\n", - i, DEBUG_LOG_SIZE, begin+len); + seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); debug_log_pos = 0; #endif + return 0; +} - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); +static int crisv10_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, crisv10_proc_show, NULL); } +static const struct file_operations crisv10_proc_fops = { + .owner = THIS_MODULE, + .open = crisv10_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + + /* Finally, routines used to initialize the serial driver. */ -static void -show_serial_version(void) +static void show_serial_version(void) { printk(KERN_INFO - "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n", + "ETRAX 100LX serial-driver %s, " + "(c) 2000-2004 Axis Communications AB\r\n", &serial_version[11]); /* "$Revision: x.yy" */ } @@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = { .break_ctl = rs_break, .send_xchar = rs_send_xchar, .wait_until_sent = rs_wait_until_sent, - .read_proc = rs_read_proc, .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset + .tiocmset = rs_tiocmset, +#ifdef CONFIG_PROC_FS + .proc_fops = &crisv10_proc_fops, +#endif }; -static int __init -rs_init(void) +static int __init rs_init(void) { int i; struct e100_serial *info; diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 8871aaa3dba..c0a3e2734e2 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -130,8 +130,6 @@ struct jsm_board struct pci_dev *pci_dev; u32 maxports; /* MAX ports this board can handle */ - spinlock_t bd_lock; /* Used to protect board */ - spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and * the interrupt routine from each other. */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index d2d32a19862..b3604aa322a 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device else brd->maxports = 2; - spin_lock_init(&brd->bd_lock); spin_lock_init(&brd->bd_intr_lock); /* store which revision we have */ diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c new file mode 100644 index 00000000000..9fd33e5622b --- /dev/null +++ b/drivers/serial/max3100.c @@ -0,0 +1,927 @@ +/* + * + * Copyright (C) 2008 Christian Pellegrin <chripell@evolware.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have + * to use polling for flow control. TX empty IRQ is unusable, since + * writing conf clears FIFO buffer and we cannot have this interrupt + * always asking us for attention. + * + * Example platform data: + + static struct plat_max3100 max3100_plat_data = { + .loopback = 0, + .crystal = 0, + .poll_time = 100, + }; + + static struct spi_board_info spi_board_info[] = { + { + .modalias = "max3100", + .platform_data = &max3100_plat_data, + .irq = IRQ_EINT12, + .max_speed_hz = 5*1000*1000, + .chip_select = 0, + }, + }; + + * The initial minor number is 209 in the low-density serial port: + * mknod /dev/ttyMAX0 c 204 209 + */ + +#define MAX3100_MAJOR 204 +#define MAX3100_MINOR 209 +/* 4 MAX3100s should be enough for everyone */ +#define MAX_MAX3100 4 + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/spi/spi.h> +#include <linux/freezer.h> + +#include <linux/serial_max3100.h> + +#define MAX3100_C (1<<14) +#define MAX3100_D (0<<14) +#define MAX3100_W (1<<15) +#define MAX3100_RX (0<<15) + +#define MAX3100_WC (MAX3100_W | MAX3100_C) +#define MAX3100_RC (MAX3100_RX | MAX3100_C) +#define MAX3100_WD (MAX3100_W | MAX3100_D) +#define MAX3100_RD (MAX3100_RX | MAX3100_D) +#define MAX3100_CMD (3 << 14) + +#define MAX3100_T (1<<14) +#define MAX3100_R (1<<15) + +#define MAX3100_FEN (1<<13) +#define MAX3100_SHDN (1<<12) +#define MAX3100_TM (1<<11) +#define MAX3100_RM (1<<10) +#define MAX3100_PM (1<<9) +#define MAX3100_RAM (1<<8) +#define MAX3100_IR (1<<7) +#define MAX3100_ST (1<<6) +#define MAX3100_PE (1<<5) +#define MAX3100_L (1<<4) +#define MAX3100_BAUD (0xf) + +#define MAX3100_TE (1<<10) +#define MAX3100_RAFE (1<<10) +#define MAX3100_RTS (1<<9) +#define MAX3100_CTS (1<<9) +#define MAX3100_PT (1<<8) +#define MAX3100_DATA (0xff) + +#define MAX3100_RT (MAX3100_R | MAX3100_T) +#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) + +/* the following simulate a status reg for ignore_status_mask */ +#define MAX3100_STATUS_PE 1 +#define MAX3100_STATUS_FE 2 +#define MAX3100_STATUS_OE 4 + +struct max3100_port { + struct uart_port port; + struct spi_device *spi; + + int cts; /* last CTS received for flow ctrl */ + int tx_empty; /* last TX empty bit */ + + spinlock_t conf_lock; /* shared data */ + int conf_commit; /* need to make changes */ + int conf; /* configuration for the MAX31000 + * (bits 0-7, bits 8-11 are irqs) */ + int rts_commit; /* need to change rts */ + int rts; /* rts status */ + int baud; /* current baud rate */ + + int parity; /* keeps track if we should send parity */ +#define MAX3100_PARITY_ON 1 +#define MAX3100_PARITY_ODD 2 +#define MAX3100_7BIT 4 + int rx_enabled; /* if we should rx chars */ + + int irq; /* irq assigned to the max3100 */ + + int minor; /* minor number */ + int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ + int loopback; /* 1 if we are in loopback mode */ + + /* for handling irqs: need workqueue since we do spi_sync */ + struct workqueue_struct *workqueue; + struct work_struct work; + /* set to 1 to make the workhandler exit as soon as possible */ + int force_end_work; + /* need to know we are suspending to avoid deadlock on workqueue */ + int suspending; + + /* hook for suspending MAX3100 via dedicated pin */ + void (*max3100_hw_suspend) (int suspend); + + /* poll time (in ms) for ctrl lines */ + int poll_time; + /* and its timer */ + struct timer_list timer; +}; + +static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ +static DEFINE_MUTEX(max3100s_lock); /* race on probe */ + +static int max3100_do_parity(struct max3100_port *s, u16 c) +{ + int parity; + + if (s->parity & MAX3100_PARITY_ODD) + parity = 1; + else + parity = 0; + + if (s->parity & MAX3100_7BIT) + c &= 0x7f; + else + c &= 0xff; + + parity = parity ^ (hweight8(c) & 1); + return parity; +} + +static int max3100_check_parity(struct max3100_port *s, u16 c) +{ + return max3100_do_parity(s, c) == ((c >> 8) & 1); +} + +static void max3100_calc_parity(struct max3100_port *s, u16 *c) +{ + if (s->parity & MAX3100_7BIT) + *c &= 0x7f; + else + *c &= 0xff; + + if (s->parity & MAX3100_PARITY_ON) + *c |= max3100_do_parity(s, *c) << 8; +} + +static void max3100_work(struct work_struct *w); + +static void max3100_dowork(struct max3100_port *s) +{ + if (!s->force_end_work && !work_pending(&s->work) && + !freezing(current) && !s->suspending) + queue_work(s->workqueue, &s->work); +} + +static void max3100_timeout(unsigned long data) +{ + struct max3100_port *s = (struct max3100_port *)data; + + if (s->port.info) { + max3100_dowork(s); + mod_timer(&s->timer, jiffies + s->poll_time); + } +} + +static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) +{ + struct spi_message message; + u16 etx, erx; + int status; + struct spi_transfer tran = { + .tx_buf = &etx, + .rx_buf = &erx, + .len = 2, + }; + + etx = cpu_to_be16(tx); + spi_message_init(&message); + spi_message_add_tail(&tran, &message); + status = spi_sync(s->spi, &message); + if (status) { + dev_warn(&s->spi->dev, "error while calling spi_sync\n"); + return -EIO; + } + *rx = be16_to_cpu(erx); + s->tx_empty = (*rx & MAX3100_T) > 0; + dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); + return 0; +} + +static int max3100_handlerx(struct max3100_port *s, u16 rx) +{ + unsigned int ch, flg, status = 0; + int ret = 0, cts; + + if (rx & MAX3100_R && s->rx_enabled) { + dev_dbg(&s->spi->dev, "%s\n", __func__); + ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); + if (rx & MAX3100_RAFE) { + s->port.icount.frame++; + flg = TTY_FRAME; + status |= MAX3100_STATUS_FE; + } else { + if (s->parity & MAX3100_PARITY_ON) { + if (max3100_check_parity(s, rx)) { + s->port.icount.rx++; + flg = TTY_NORMAL; + } else { + s->port.icount.parity++; + flg = TTY_PARITY; + status |= MAX3100_STATUS_PE; + } + } else { + s->port.icount.rx++; + flg = TTY_NORMAL; + } + } + uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); + ret = 1; + } + + cts = (rx & MAX3100_CTS) > 0; + if (s->cts != cts) { + s->cts = cts; + uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); + } + + return ret; +} + +static void max3100_work(struct work_struct *w) +{ + struct max3100_port *s = container_of(w, struct max3100_port, work); + int rxchars; + u16 tx, rx; + int conf, cconf, rts, crts; + struct circ_buf *xmit = &s->port.info->xmit; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rxchars = 0; + do { + spin_lock(&s->conf_lock); + conf = s->conf; + cconf = s->conf_commit; + s->conf_commit = 0; + rts = s->rts; + crts = s->rts_commit; + s->rts_commit = 0; + spin_unlock(&s->conf_lock); + if (cconf) + max3100_sr(s, MAX3100_WC | conf, &rx); + if (crts) { + max3100_sr(s, MAX3100_WD | MAX3100_TE | + (s->rts ? MAX3100_RTS : 0), &rx); + rxchars += max3100_handlerx(s, rx); + } + + max3100_sr(s, MAX3100_RD, &rx); + rxchars += max3100_handlerx(s, rx); + + if (rx & MAX3100_T) { + tx = 0xffff; + if (s->port.x_char) { + tx = s->port.x_char; + s->port.icount.tx++; + s->port.x_char = 0; + } else if (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)) { + tx = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + s->port.icount.tx++; + } + if (tx != 0xffff) { + max3100_calc_parity(s, &tx); + tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); + max3100_sr(s, tx, &rx); + rxchars += max3100_handlerx(s, rx); + } + } + + if (rxchars > 16 && s->port.info->port.tty != NULL) { + tty_flip_buffer_push(s->port.info->port.tty); + rxchars = 0; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + } while (!s->force_end_work && + !freezing(current) && + ((rx & MAX3100_R) || + (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)))); + + if (rxchars > 0 && s->port.info->port.tty != NULL) + tty_flip_buffer_push(s->port.info->port.tty); +} + +static irqreturn_t max3100_irq(int irqno, void *dev_id) +{ + struct max3100_port *s = dev_id; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); + return IRQ_HANDLED; +} + +static void max3100_enable_ms(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + if (s->poll_time > 0) + mod_timer(&s->timer, jiffies); + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_start_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); +} + +static void max3100_stop_rx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->rx_enabled = 0; + spin_lock(&s->conf_lock); + s->conf &= ~MAX3100_RM; + s->conf_commit = 1; + spin_unlock(&s->conf_lock); + max3100_dowork(s); +} + +static unsigned int max3100_tx_empty(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + return s->tx_empty; +} + +static unsigned int max3100_get_mctrl(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + /* always assert DCD and DSR since these lines are not wired */ + return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; +} + +static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int rts; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rts = (mctrl & TIOCM_RTS) > 0; + + spin_lock(&s->conf_lock); + if (s->rts != rts) { + s->rts = rts; + s->rts_commit = 1; + max3100_dowork(s); + } + spin_unlock(&s->conf_lock); +} + +static void +max3100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int baud = 0; + unsigned cflag; + u32 param_new, param_mask, parity = 0; + struct tty_struct *tty = s->port.info->port.tty; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + if (!tty) + return; + + cflag = termios->c_cflag; + param_new = 0; + param_mask = 0; + + baud = tty_get_baud_rate(tty); + param_new = s->conf & MAX3100_BAUD; + switch (baud) { + case 300: + if (s->crystal) + baud = s->baud; + else + param_new = 15; + break; + case 600: + param_new = 14 + s->crystal; + break; + case 1200: + param_new = 13 + s->crystal; + break; + case 2400: + param_new = 12 + s->crystal; + break; + case 4800: + param_new = 11 + s->crystal; + break; + case 9600: + param_new = 10 + s->crystal; + break; + case 19200: + param_new = 9 + s->crystal; + break; + case 38400: + param_new = 8 + s->crystal; + break; + case 57600: + param_new = 1 + s->crystal; + break; + case 115200: + param_new = 0 + s->crystal; + break; + case 230400: + if (s->crystal) + param_new = 0; + else + baud = s->baud; + break; + default: + baud = s->baud; + } + tty_encode_baud_rate(tty, baud, baud); + s->baud = baud; + param_mask |= MAX3100_BAUD; + + if ((cflag & CSIZE) == CS8) { + param_new &= ~MAX3100_L; + parity &= ~MAX3100_7BIT; + } else { + param_new |= MAX3100_L; + parity |= MAX3100_7BIT; + cflag = (cflag & ~CSIZE) | CS7; + } + param_mask |= MAX3100_L; + + if (cflag & CSTOPB) + param_new |= MAX3100_ST; + else + param_new &= ~MAX3100_ST; + param_mask |= MAX3100_ST; + + if (cflag & PARENB) { + param_new |= MAX3100_PE; + parity |= MAX3100_PARITY_ON; + } else { + param_new &= ~MAX3100_PE; + parity &= ~MAX3100_PARITY_ON; + } + param_mask |= MAX3100_PE; + + if (cflag & PARODD) + parity |= MAX3100_PARITY_ODD; + else + parity &= ~MAX3100_PARITY_ODD; + + /* mask termios capabilities we don't support */ + cflag &= ~CMSPAR; + termios->c_cflag = cflag; + + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= + MAX3100_STATUS_PE | MAX3100_STATUS_FE | + MAX3100_STATUS_OE; + + /* we are sending char from a workqueue so enable */ + s->port.info->port.tty->low_latency = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock(&s->conf_lock); + s->conf = (s->conf & ~param_mask) | (param_new & param_mask); + s->conf_commit = 1; + s->parity = parity; + spin_unlock(&s->conf_lock); + max3100_dowork(s); + + if (UART_ENABLE_MS(&s->port, termios->c_cflag)) + max3100_enable_ms(&s->port); +} + +static void max3100_shutdown(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->suspending) + return; + + s->force_end_work = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + if (s->workqueue) { + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + if (s->irq) + free_irq(s->irq, s); + + /* set shutdown mode to save power */ + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } +} + +static int max3100_startup(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + char b[12]; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->conf = MAX3100_RM; + s->baud = s->crystal ? 230400 : 115200; + s->rx_enabled = 1; + + if (s->suspending) + return 0; + + s->force_end_work = 0; + s->parity = 0; + s->rts = 0; + + sprintf(b, "max3100-%d", s->minor); + s->workqueue = create_freezeable_workqueue(b); + if (!s->workqueue) { + dev_warn(&s->spi->dev, "cannot create workqueue\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3100_work); + + if (request_irq(s->irq, max3100_irq, + IRQF_TRIGGER_FALLING, "max3100", s) < 0) { + dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); + s->irq = 0; + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + if (s->loopback) { + u16 tx, rx; + tx = 0x4001; + max3100_sr(s, tx, &rx); + } + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + s->conf_commit = 1; + max3100_dowork(s); + /* wait for clock to settle */ + msleep(50); + + max3100_enable_ms(&s->port); + + return 0; +} + +static const char *max3100_type(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; +} + +static void max3100_release_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_config_port(struct uart_port *port, int flags) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (flags & UART_CONFIG_TYPE) + s->port.type = PORT_MAX3100; +} + +static int max3100_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int ret = -EINVAL; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + ret = 0; + return ret; +} + +static void max3100_stop_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static int max3100_request_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + return 0; +} + +static void max3100_break_ctl(struct uart_port *port, int break_state) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static struct uart_ops max3100_ops = { + .tx_empty = max3100_tx_empty, + .set_mctrl = max3100_set_mctrl, + .get_mctrl = max3100_get_mctrl, + .stop_tx = max3100_stop_tx, + .start_tx = max3100_start_tx, + .stop_rx = max3100_stop_rx, + .enable_ms = max3100_enable_ms, + .break_ctl = max3100_break_ctl, + .startup = max3100_startup, + .shutdown = max3100_shutdown, + .set_termios = max3100_set_termios, + .type = max3100_type, + .release_port = max3100_release_port, + .request_port = max3100_request_port, + .config_port = max3100_config_port, + .verify_port = max3100_verify_port, +}; + +static struct uart_driver max3100_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .major = MAX3100_MAJOR, + .minor = MAX3100_MINOR, + .nr = MAX_MAX3100, +}; +static int uart_driver_registered; + +static int __devinit max3100_probe(struct spi_device *spi) +{ + int i, retval; + struct plat_max3100 *pdata; + u16 tx, rx; + + mutex_lock(&max3100s_lock); + + if (!uart_driver_registered) { + uart_driver_registered = 1; + retval = uart_register_driver(&max3100_uart_driver); + if (retval) { + printk(KERN_ERR "Couldn't register max3100 uart driver\n"); + mutex_unlock(&max3100s_lock); + return retval; + } + } + + for (i = 0; i < MAX_MAX3100; i++) + if (!max3100s[i]) + break; + if (i == MAX_MAX3100) { + dev_warn(&spi->dev, "too many MAX3100 chips\n"); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + + max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); + if (!max3100s[i]) { + dev_warn(&spi->dev, + "kmalloc for max3100 structure %d failed!\n", i); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + max3100s[i]->spi = spi; + max3100s[i]->irq = spi->irq; + spin_lock_init(&max3100s[i]->conf_lock); + dev_set_drvdata(&spi->dev, max3100s[i]); + pdata = spi->dev.platform_data; + max3100s[i]->crystal = pdata->crystal; + max3100s[i]->loopback = pdata->loopback; + max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; + if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) + max3100s[i]->poll_time = 1; + max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; + max3100s[i]->minor = i; + init_timer(&max3100s[i]->timer); + max3100s[i]->timer.function = max3100_timeout; + max3100s[i]->timer.data = (unsigned long) max3100s[i]; + + dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); + max3100s[i]->port.irq = max3100s[i]->irq; + max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; + max3100s[i]->port.fifosize = 16; + max3100s[i]->port.ops = &max3100_ops; + max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + max3100s[i]->port.line = i; + max3100s[i]->port.type = PORT_MAX3100; + max3100s[i]->port.dev = &spi->dev; + retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); + if (retval < 0) + dev_warn(&spi->dev, + "uart_add_one_port failed for line %d with error %d\n", + i, retval); + + /* set shutdown mode to save power. Will be woken-up on open */ + if (max3100s[i]->max3100_hw_suspend) + max3100s[i]->max3100_hw_suspend(1); + else { + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(max3100s[i], tx, &rx); + } + mutex_unlock(&max3100s_lock); + return 0; +} + +static int __devexit max3100_remove(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + int i; + + mutex_lock(&max3100s_lock); + + /* find out the index for the chip we are removing */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i] == s) + break; + + dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); + uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); + kfree(max3100s[i]); + max3100s[i] = NULL; + + /* check if this is the last chip we have */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i]) { + mutex_unlock(&max3100s_lock); + return 0; + } + pr_debug("removing max3100 driver\n"); + uart_unregister_driver(&max3100_uart_driver); + + mutex_unlock(&max3100s_lock); + return 0; +} + +#ifdef CONFIG_PM + +static int max3100_suspend(struct spi_device *spi, pm_message_t state) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + disable_irq(s->irq); + + s->suspending = 1; + uart_suspend_port(&max3100_uart_driver, &s->port); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + /* no HW suspend, so do SW one */ + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } + return 0; +} + +static int max3100_resume(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + uart_resume_port(&max3100_uart_driver, &s->port); + s->suspending = 0; + + enable_irq(s->irq); + + s->conf_commit = 1; + if (s->workqueue) + max3100_dowork(s); + + return 0; +} + +#else +#define max3100_suspend NULL +#define max3100_resume NULL +#endif + +static struct spi_driver max3100_driver = { + .driver = { + .name = "max3100", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = max3100_probe, + .remove = __devexit_p(max3100_remove), + .suspend = max3100_suspend, + .resume = max3100_resume, +}; + +static int __init max3100_init(void) +{ + return spi_register_driver(&max3100_driver); +} +module_init(max3100_init); + +static void __exit max3100_exit(void) +{ + spi_unregister_driver(&max3100_driver); +} +module_exit(max3100_exit); + +MODULE_DESCRIPTION("MAX3100 driver"); +MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c index 06936d13393..3e378523368 100644 --- a/drivers/serial/s3c6400.c +++ b/drivers/serial/s3c6400.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = { .name = "Samsung S3C6400 UART", .type = PORT_S3C6400, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 41ac94872b8..93b5d75db12 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -127,7 +127,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); if (tx_enabled(port)) { - disable_irq(ourport->tx_irq); + disable_irq_nosync(ourport->tx_irq); tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); @@ -154,7 +154,7 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port) if (rx_enabled(port)) { dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq(ourport->rx_irq); + disable_irq_nosync(ourport->rx_irq); rx_enabled(port) = 0; } } @@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) struct baud_calc { struct s3c24xx_uart_clksrc *clksrc; unsigned int calc; + unsigned int divslot; unsigned int quot; struct clk *src; }; @@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, struct s3c24xx_uart_clksrc *clksrc, unsigned int baud) { + struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long rate; calc->src = clk_get(port->dev, clksrc->name); @@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, rate /= clksrc->divisor; calc->clksrc = clksrc; - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); + + if (ourport->info->has_divslot) { + unsigned long div = rate / baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we calculated + * by not multiplying the baud by 16) as it is easy enough + * to recalculate. + */ + + calc->quot = div / 16; + calc->calc = rate / div; + } else { + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + } calc->quot--; return 1; @@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port, return best->quot; } +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, unsigned int baud, quot; unsigned int ulcon; unsigned int umcon; + unsigned int udivslot = 0; /* * We don't support modem control lines. @@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, /* check to see if we need to change clock source */ if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + dbg("selecting clock %p\n", clk); s3c24xx_serial_setsource(port, clksrc); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { @@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + udivslot = udivslot_table[div & 15]; + dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); + } + switch (termios->c_cflag & CSIZE) { case CS5: dbg("config: 5bits/char\n"); @@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot); + dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); wr_regl(port, S3C2410_ULCON, ulcon); wr_regl(port, S3C2410_UBRDIV, quot); wr_regl(port, S3C2410_UMCON, umcon); + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", rd_regl(port, S3C2410_ULCON), rd_regl(port, S3C2410_UCON), diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 571d6b90d20..7afb94843a0 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -21,6 +21,10 @@ struct s3c24xx_uart_info { unsigned long tx_fifoshift; unsigned long tx_fifofull; + /* uart port features */ + + unsigned int has_divslot:1; + /* clock source control */ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index a4dc79b1d7a..47c6837850b 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1178,7 +1178,7 @@ static struct uart_driver sunsu_reg = { .major = TTY_MAJOR, }; -static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up) +static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) { int quot, baud; #ifdef CONFIG_SERIO |