diff options
Diffstat (limited to 'drivers/serial')
42 files changed, 130 insertions, 127 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 6a1a568ca64..facb6785561 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -214,8 +214,8 @@ static void serial21285_shutdown(struct uart_port *port) } static void -serial21285_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +serial21285_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned long flags; unsigned int baud, quot, h_lcr; diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index 9b8b585513e..cad426c9711 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -1061,7 +1061,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, return 0; } -static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios) +static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 634ecca36a7..68817a7d8c0 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -1523,7 +1523,7 @@ static int rs_360_ioctl(struct tty_struct *tty, struct file * file, /* FIX UP modem control here someday...... */ -static void rs_360_set_termios(struct tty_struct *tty, struct termios *old_termios) +static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { ser_info_t *info = (ser_info_t *)tty->driver_data; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index e34bd03cfce..51f3c739f7e 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1763,8 +1763,8 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int } static void -serial8250_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_8250_port *up = (struct uart_8250_port *)port; unsigned char cval, fcr = 0; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index fc12d5df10e..0b36dd5cdac 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS say N here to save some memory. You can also say Y if you have an "intelligent" multiport card such as Cyclades, Digiboards, etc. -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - # # Multi-port serial cards # @@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT To compile this driver as a module, choose M here: the module will be called 8250_accent. - config SERIAL_8250_BOCA tristate "Support Boca cards" depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS @@ -230,6 +203,32 @@ config SERIAL_8250_HUB6 To compile this driver as a module, choose M here: the module will be called 8250_hub6. +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + config SERIAL_8250_MCA tristate "Support 8250-type ports on MCA buses" depends on SERIAL_8250 != n && MCA diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 4d3626ef464..61db6973755 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -345,8 +345,8 @@ static void pl010_shutdown(struct uart_port *port) } static void -pl010_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +pl010_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned int lcr_h, old_cr; unsigned long flags; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index d503625730d..9a3b374b2a0 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -412,8 +412,8 @@ static void pl011_shutdown(struct uart_port *port) } static void -pl011_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +pl011_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned int lcr_h, old_cr; unsigned long flags; diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 391a1f4167a..ed7f7209ea5 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1,5 +1,5 @@ /* - * linux/drivers/char/at91_serial.c + * linux/drivers/char/atmel_serial.c * * Driver for Atmel AT91 / AT32 Serial ports * Copyright (C) 2003 Rick Bronson @@ -36,11 +36,11 @@ #include <asm/io.h> -#include <asm/arch/at91rm9200_pdc.h> #include <asm/mach/serial_at91.h> #include <asm/arch/board.h> +#include <asm/arch/at91_pdc.h> #ifdef CONFIG_ARM -#include <asm/arch/system.h> +#include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #endif @@ -137,8 +137,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) unsigned int control = 0; unsigned int mode; -#ifdef CONFIG_ARM - if (arch_identify() == ARCH_ID_AT91RM9200) { +#ifdef CONFIG_ARCH_AT91RM9200 + if (cpu_is_at91rm9200()) { /* * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21. * We need to drive the pin manually. @@ -478,7 +478,7 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state, unsigned /* * Change the port parameters */ -static void atmel_set_termios(struct uart_port *port, struct termios * termios, struct termios * old) +static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old) { unsigned long flags; unsigned int mode, imr, quot, baud; diff --git a/drivers/serial/atmel_serial.h b/drivers/serial/atmel_serial.h index eced2ad1a8d..fe1763b2a6d 100644 --- a/drivers/serial/atmel_serial.h +++ b/drivers/serial/atmel_serial.h @@ -31,8 +31,8 @@ #define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ #define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ #define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ -#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ -#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ +#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ +#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ #define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ #define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ @@ -92,9 +92,9 @@ #define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ #define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ #define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ -#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change */ -#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ -#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ +#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ +#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ +#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ #define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ #define ATMEL_US_RI (1 << 20) /* RI */ #define ATMEL_US_DSR (1 << 21) /* DSR */ @@ -106,6 +106,7 @@ #define ATMEL_US_CSR 0x14 /* Channel Status Register */ #define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ #define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ +#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [SAM9 only] */ #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ #define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 59801271488..23827189ec0 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -286,8 +286,8 @@ static void clps711xuart_shutdown(struct uart_port *port) } static void -clps711xuart_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned int ubrlcr, baud, quot; unsigned long flags; diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 7a24e53546c..42b050c46ab 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -804,8 +804,8 @@ static struct e100_serial rs_table[] = { #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) -static struct termios *serial_termios[NR_PORTS]; -static struct termios *serial_termios_locked[NR_PORTS]; +static struct ktermios *serial_termios[NR_PORTS]; +static struct ktermios *serial_termios_locked[NR_PORTS]; #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER static struct fast_timer fast_timers[NR_PORTS]; #endif @@ -4223,7 +4223,7 @@ rs_ioctl(struct tty_struct *tty, struct file * file, } static void -rs_set_termios(struct tty_struct *tty, struct termios *old_termios) +rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; @@ -4877,6 +4877,8 @@ rs_init(void) driver->init_termios = tty_std_termios; driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ + driver->init_termios.c_ispeed = 115200; + driver->init_termios.c_ospeed = 115200; driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; driver->termios = serial_termios; driver->termios_locked = serial_termios_locked; diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index f30b93d6ef7..4a23340663a 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -93,8 +93,8 @@ struct e100_serial { struct work_struct work; struct async_icount icount; /* error-statistics etc.*/ - struct termios normal_termios; - struct termios callout_termios; + struct ktermios normal_termios; + struct ktermios callout_termios; #ifdef DECLARE_WAITQUEUE wait_queue_head_t open_wait; wait_queue_head_t close_wait; diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index af1544f3356..587d87b9eb3 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -461,8 +461,8 @@ static void dz_break_ctl(struct uart_port *uport, int break_state) spin_unlock_irqrestore(&uport->lock, flags); } -static void dz_set_termios(struct uart_port *uport, struct termios *termios, - struct termios *old_termios) +static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 8aa0f641866..7d623003e65 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1087,8 +1087,8 @@ static void icom_close(struct uart_port *port) } static void icom_set_termios(struct uart_port *port, - struct termios *termios, - struct termios *old_termios) + struct ktermios *termios, + struct ktermios *old_termios) { int baud; unsigned cflag, iflag; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index ee5c782597d..e216dcf2937 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -459,8 +459,8 @@ static void imx_shutdown(struct uart_port *port) } static void -imx_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +imx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct imx_port *sport = (struct imx_port *)port; unsigned long flags; diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 2308d26c862..9cc0be93231 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -950,7 +950,7 @@ static void transmit_chars(struct uart_port *the_port) */ static void ioc3_change_speed(struct uart_port *the_port, - struct termios *new_termios, struct termios *old_termios) + struct ktermios *new_termios, struct ktermios *old_termios) { struct ioc3_port *port = get_ioc3_port(the_port); unsigned int cflag; @@ -1853,7 +1853,7 @@ static int ic3_startup(struct uart_port *the_port) */ static void ic3_set_termios(struct uart_port *the_port, - struct termios *termios, struct termios *old_termios) + struct ktermios *termios, struct ktermios *old_termios) { unsigned long port_flags; diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 711bd151143..c862f67c985 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -1681,7 +1681,7 @@ static void transmit_chars(struct uart_port *the_port) */ static void ioc4_change_speed(struct uart_port *the_port, - struct termios *new_termios, struct termios *old_termios) + struct ktermios *new_termios, struct ktermios *old_termios) { struct ioc4_port *port = get_ioc4_port(the_port, 0); int baud, bits; @@ -1802,7 +1802,7 @@ static inline int ic4_startup_local(struct uart_port *the_port) ioc4_set_proto(port, the_port->mapbase); /* set the speed of the serial port */ - ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0); + ioc4_change_speed(the_port, info->tty->termios, (struct ktermios *)0); return 0; } @@ -2570,7 +2570,7 @@ static int ic4_startup(struct uart_port *the_port) */ static void ic4_set_termios(struct uart_port *the_port, - struct termios *termios, struct termios *old_termios) + struct ktermios *termios, struct ktermios *old_termios) { unsigned long port_flags; diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index dca6c1bde8f..0746c9446ae 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -840,8 +840,8 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, /* The port lock is not held. */ static void -ip22zilog_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; unsigned long flags; diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index f8262e6ad8d..7cf1c60027f 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -142,7 +142,7 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch) { unsigned long lock_flags; struct jsm_channel *channel = (struct jsm_channel *)port; - struct termios *termios; + struct ktermios *termios; spin_lock_irqsave(&port->lock, lock_flags); termios = port->info->tty->termios; @@ -180,7 +180,7 @@ static int jsm_tty_open(struct uart_port *port) struct jsm_board *brd; int rc = 0; struct jsm_channel *channel = (struct jsm_channel *)port; - struct termios *termios; + struct ktermios *termios; /* Get board pointer from our array of majors we have allocated */ brd = channel->ch_bd; @@ -269,7 +269,7 @@ static int jsm_tty_open(struct uart_port *port) static void jsm_tty_close(struct uart_port *port) { struct jsm_board *bd; - struct termios *ts; + struct ktermios *ts; struct jsm_channel *channel = (struct jsm_channel *)port; jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); @@ -302,8 +302,8 @@ static void jsm_tty_close(struct uart_port *port) } static void jsm_tty_set_termios(struct uart_port *port, - struct termios *termios, - struct termios *old_termios) + struct ktermios *termios, + struct ktermios *old_termios) { unsigned long lock_flags; struct jsm_channel *channel = (struct jsm_channel *)port; diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index 7656a35f5e2..6e09c8b395e 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -699,7 +699,7 @@ static unsigned int m32r_sio_get_divisor(struct uart_port *port, } static void m32r_sio_set_termios(struct uart_port *port, - struct termios *termios, struct termios *old) + struct ktermios *termios, struct ktermios *old) { struct uart_sio_port *up = (struct uart_sio_port *)port; unsigned char cval = 0; diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index 3db206d29b3..08430961a89 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -1132,7 +1132,7 @@ static int mcfrs_ioctl(struct tty_struct *tty, struct file * file, return 0; } -static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios) +static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 6dd579ed977..9d11a75663e 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -270,8 +270,8 @@ mpc52xx_uart_shutdown(struct uart_port *port) } static void -mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new, - struct termios *old) +mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) { struct mpc52xx_psc __iomem *psc = PSC(port); unsigned long flags; diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index 29823bd60fb..3d2fcc57b1c 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -1440,8 +1440,8 @@ mpsc_shutdown(struct uart_port *port) } static void -mpsc_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +mpsc_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct mpsc_port_info *pi = (struct mpsc_port_info *)port; u32 baud; diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 8ad1b8c5ec5..ccb8fa1800a 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -273,8 +273,8 @@ static void mux_shutdown(struct uart_port *port) * The Serial Mux does not support this function. */ static void -mux_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +mux_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { } diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c index 062bad457b1..b56f7db4503 100644 --- a/drivers/serial/netx-serial.c +++ b/drivers/serial/netx-serial.c @@ -337,8 +337,8 @@ static void netx_shutdown(struct uart_port *port) } static void -netx_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +netx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned int baud, quot; unsigned char old_cr; diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index bf9809ed9c0..752ef07516b 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1262,8 +1262,8 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) } -static void __pmz_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long baud; @@ -1273,7 +1273,7 @@ static void __pmz_set_termios(struct uart_port *port, struct termios *termios, if (ZS_IS_ASLEEP(uap)) return; - memcpy(&uap->termios_cache, termios, sizeof(struct termios)); + memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); /* XXX Check which revs of machines actually allow 1 and 4Mb speeds * on the IR dongle. Note that the IRTTY driver currently doesn't know @@ -1313,8 +1313,8 @@ static void __pmz_set_termios(struct uart_port *port, struct termios *termios, } /* The port lock is not held. */ -static void pmz_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long flags; diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index c03f9bfacdd..570b0d925e8 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -60,7 +60,7 @@ struct uart_pmac_port { volatile struct dbdma_regs __iomem *tx_dma_regs; volatile struct dbdma_regs __iomem *rx_dma_regs; - struct termios termios_cache; + struct ktermios termios_cache; }; #define to_pmz(p) ((struct uart_pmac_port *)(p)) diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 415fe9633a9..d403aaa5509 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -433,8 +433,8 @@ static void serial_pxa_shutdown(struct uart_port *port) } static void -serial_pxa_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_pxa_port *up = (struct uart_pxa_port *)port; unsigned char cval, fcr = 0; diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 8dfc2dd058c..3ba9208ebd0 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -738,8 +738,8 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port, } static void s3c24xx_serial_set_termios(struct uart_port *port, - struct termios *termios, - struct termios *old) + struct ktermios *termios, + struct ktermios *old) { struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index d4065266b6f..58a83c27e14 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -408,8 +408,8 @@ static void sa1100_shutdown(struct uart_port *port) } static void -sa1100_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +sa1100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct sa1100_port *sport = (struct sa1100_port *)port; unsigned long flags; diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index c67b05e9a45..f84982e508c 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -65,7 +65,7 @@ static struct lock_class_key port_lock_key; #define uart_console(port) (0) #endif -static void uart_change_speed(struct uart_state *state, struct termios *old_termios); +static void uart_change_speed(struct uart_state *state, struct ktermios *old_termios); static void uart_wait_until_sent(struct tty_struct *tty, int timeout); static void uart_change_pm(struct uart_state *state, int pm_state); @@ -338,8 +338,8 @@ EXPORT_SYMBOL(uart_update_timeout); * we're actually going to be using. */ unsigned int -uart_get_baud_rate(struct uart_port *port, struct termios *termios, - struct termios *old, unsigned int min, unsigned int max) +uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, + struct ktermios *old, unsigned int min, unsigned int max) { unsigned int try, baud, altbaud = 38400; upf_t flags = port->flags & UPF_SPD_MASK; @@ -421,11 +421,11 @@ uart_get_divisor(struct uart_port *port, unsigned int baud) EXPORT_SYMBOL(uart_get_divisor); static void -uart_change_speed(struct uart_state *state, struct termios *old_termios) +uart_change_speed(struct uart_state *state, struct ktermios *old_termios) { struct tty_struct *tty = state->info->tty; struct uart_port *port = state->port; - struct termios *termios; + struct ktermios *termios; /* * If we have no tty, termios, or the port does not exist, @@ -1139,7 +1139,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, return ret; } -static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios) +static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct uart_state *state = tty->driver_data; unsigned long flags; @@ -1866,7 +1866,7 @@ int __init uart_set_options(struct uart_port *port, struct console *co, int baud, int parity, int bits, int flow) { - struct termios termios; + struct ktermios termios; int i; /* @@ -1876,7 +1876,7 @@ uart_set_options(struct uart_port *port, struct console *co, spin_lock_init(&port->lock); lockdep_set_class(&port->lock, &port_lock_key); - memset(&termios, 0, sizeof(struct termios)); + memset(&termios, 0, sizeof(struct ktermios)); termios.c_cflag = CREAD | HUPCL | CLOCAL; @@ -1991,12 +1991,12 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) * Re-enable the console device after suspending. */ if (uart_console(port)) { - struct termios termios; + struct ktermios termios; /* * First try to use the console cflag setting. */ - memset(&termios, 0, sizeof(struct termios)); + memset(&termios, 0, sizeof(struct ktermios)); termios.c_cflag = port->cons->cflag; /* @@ -2189,6 +2189,7 @@ int uart_register_driver(struct uart_driver *drv) normal->subtype = SERIAL_TYPE_NORMAL; normal->init_termios = tty_std_termios; normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600; normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; normal->driver_state = drv; tty_set_operations(normal, &uart_ops); diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index 5e1ac356bbb..eb18d429752 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -348,8 +348,8 @@ static void lh7a40xuart_shutdown (struct uart_port* port) } static void lh7a40xuart_set_termios (struct uart_port* port, - struct termios* termios, - struct termios* old) + struct ktermios* termios, + struct ktermios* old) { unsigned int con; unsigned int inten; diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 2a48289ac72..7186a82c475 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -556,8 +556,8 @@ static void serial_txx9_shutdown(struct uart_port *port) } static void -serial_txx9_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_txx9_port *up = (struct uart_txx9_port *)port; unsigned int cval, fcr = 0; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 3b5f19ec212..9031b57f12d 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -943,8 +943,8 @@ static void sci_shutdown(struct uart_port *port) s->disable(port); } -static void sci_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void sci_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct sci_port *s = &sci_ports[port->line]; unsigned int status, baud, smr_val; diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 956b2cf08e1..253ceb895ca 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -361,8 +361,8 @@ static int snp_startup(struct uart_port *port) * */ static void -snp_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +snp_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { } diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index 03941d27d15..40d48566215 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -281,8 +281,8 @@ static void sunhv_shutdown(struct uart_port *port) } /* port->lock is not held. */ -static void sunhv_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); unsigned int quot = uart_get_divisor(port, baud); diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 08a7cd6a3a0..493d5bbb661 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -786,8 +786,8 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla } /* port->lock is not held. */ -static void sunsab_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; unsigned long flags; diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index c577faea60e..564592b2b2b 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -893,8 +893,8 @@ sunsu_change_speed(struct uart_port *port, unsigned int cflag, } static void -sunsu_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +sunsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned int baud, quot; diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index b2cc703b2b9..75de919a947 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -922,8 +922,8 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, /* The port lock is not held. */ static void -sunzilog_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; unsigned long flags; diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 83690653b78..92eba893559 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -214,8 +214,8 @@ static void ulite_shutdown(struct uart_port *port) free_irq(port->irq, port); } -static void ulite_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned long flags; unsigned int baud; diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c index 28f3bbff87b..dd98aca6ed0 100644 --- a/drivers/serial/v850e_uart.c +++ b/drivers/serial/v850e_uart.c @@ -404,8 +404,8 @@ static void v850e_uart_shutdown (struct uart_port *port) } static void -v850e_uart_set_termios (struct uart_port *port, struct termios *termios, - struct termios *old) +v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { unsigned cflags = termios->c_cflag; diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index fd51f8182de..cf0e663b42e 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -562,8 +562,8 @@ static void siu_shutdown(struct uart_port *port) free_irq(port->irq, port); } -static void siu_set_termios(struct uart_port *port, struct termios *new, - struct termios *old) +static void siu_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) { tcflag_t c_cflag, c_iflag; uint8_t lcr, fcr, ier; |