summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/21285.c4
-rw-r--r--drivers/serial/8250_pnp.c12
-rw-r--r--drivers/serial/imx.c2
-rw-r--r--drivers/serial/ioc3_serial.c4
-rw-r--r--drivers/serial/ioc4_serial.c20
-rw-r--r--drivers/serial/pmac_zilog.c11
-rw-r--r--drivers/serial/pxa.c2
-rw-r--r--drivers/serial/serial_core.c105
-rw-r--r--drivers/serial/serial_cs.c3
-rw-r--r--drivers/serial/sh-sci.c89
-rw-r--r--drivers/serial/sh-sci.h118
11 files changed, 214 insertions, 156 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 1e3d19397a5..8681f134505 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -58,7 +58,7 @@ static const char serial21285_name[] = "Footbridge UART";
static void serial21285_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
- disable_irq(IRQ_CONTX);
+ disable_irq_nosync(IRQ_CONTX);
tx_enabled(port) = 0;
}
}
@@ -74,7 +74,7 @@ static void serial21285_start_tx(struct uart_port *port)
static void serial21285_stop_rx(struct uart_port *port)
{
if (rx_enabled(port)) {
- disable_irq(IRQ_CONRX);
+ disable_irq_nosync(IRQ_CONRX);
rx_enabled(port) = 0;
}
}
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 36ede02ceac..24485cc62ff 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = {
/* U.S. Robotics 56K Voice INT PnP*/
{ "USR9190", 0 },
/* Wacom tablets */
- { "WACF004", 0 },
- { "WACF005", 0 },
- { "WACF006", 0 },
- { "WACF007", 0 },
- { "WACF008", 0 },
- { "WACF009", 0 },
- { "WACF00A", 0 },
- { "WACF00B", 0 },
- { "WACF00C", 0 },
+ { "WACFXXX", 0 },
/* Compaq touchscreen */
{ "FPI2002", 0 },
/* Fujitsu Stylistic touchscreens */
@@ -354,6 +346,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
{ "FUJ02E5", 0 },
/* Fujitsu P-series tablet PC device */
{ "FUJ02E6", 0 },
+ /* Fujitsu Wacom 2FGT Tablet PC device */
+ { "FUJ02E7", 0 },
/*
* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
* disguise)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 18130f11238..60d665a17a8 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
int *parity, int *bits)
{
- if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
+ if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
/* ok, the port was enabled */
unsigned int ucr2, ubir,ubmr, uartclk;
unsigned int baud_raw;
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index d8983dd5c4b..85dc0410ac1 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -2162,7 +2162,7 @@ static struct ioc3_submodule ioc3uart_ops = {
/**
* ioc3_detect - module init called,
*/
-static int __devinit ioc3uart_init(void)
+static int __init ioc3uart_init(void)
{
int ret;
@@ -2179,7 +2179,7 @@ static int __devinit ioc3uart_init(void)
return ret;
}
-static void __devexit ioc3uart_exit(void)
+static void __exit ioc3uart_exit(void)
{
ioc3_unregister_submodule(&ioc3uart_ops);
uart_unregister_driver(&ioc3_uart);
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 2e02c3026d2..836d9ab4f72 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -2904,7 +2904,7 @@ static struct ioc4_submodule ioc4_serial_submodule = {
/**
* ioc4_serial_init - module init
*/
-int ioc4_serial_init(void)
+static int __init ioc4_serial_init(void)
{
int ret;
@@ -2913,20 +2913,30 @@ int ioc4_serial_init(void)
printk(KERN_WARNING
"%s: Couldn't register rs232 IOC4 serial driver\n",
__func__);
- return ret;
+ goto out;
}
if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) {
printk(KERN_WARNING
"%s: Couldn't register rs422 IOC4 serial driver\n",
__func__);
- return ret;
+ goto out_uart_rs232;
}
/* register with IOC4 main module */
- return ioc4_register_submodule(&ioc4_serial_submodule);
+ ret = ioc4_register_submodule(&ioc4_serial_submodule);
+ if (ret)
+ goto out_uart_rs422;
+ return 0;
+
+out_uart_rs422:
+ uart_unregister_driver(&ioc4_uart_rs422);
+out_uart_rs232:
+ uart_unregister_driver(&ioc4_uart_rs232);
+out:
+ return ret;
}
-static void __devexit ioc4_serial_exit(void)
+static void __exit ioc4_serial_exit(void)
{
ioc4_unregister_submodule(&ioc4_serial_submodule);
uart_unregister_driver(&ioc4_uart_rs232);
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0700cd10b97..683e66f18e8 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
goto ack_tx_int;
}
+ /* Under some circumstances, we see interrupts reported for
+ * a closed channel. The interrupt mask in R1 is clear, but
+ * R3 still signals the interrupts and we see them when taking
+ * an interrupt for the other channel (this could be a qemu
+ * bug but since the ESCC doc doesn't specify precsiely whether
+ * R3 interrup status bits are masked by R1 interrupt enable
+ * bits, better safe than sorry). --BenH.
+ */
+ if (!ZS_IS_OPEN(uap))
+ goto ack_tx_int;
+
if (uap->port.x_char) {
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
write_zsdata(uap, uap->port.x_char);
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 4a821046baa..56ee082157a 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -756,7 +756,7 @@ static int serial_pxa_resume(struct device *dev)
return 0;
}
-static struct dev_pm_ops serial_pxa_pm_ops = {
+static const struct dev_pm_ops serial_pxa_pm_ops = {
.suspend = serial_pxa_suspend,
.resume = serial_pxa_resume,
};
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 047530b285b..7f283070951 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
}
/*
- * As a last resort, if the quotient is zero,
- * default to 9600 bps
+ * As a last resort, if the range cannot be met then clip to
+ * the nearest chip supported rate.
*/
- if (!hung_up)
- tty_termios_encode_baud_rate(termios, 9600, 9600);
+ if (!hung_up) {
+ if (baud <= min)
+ tty_termios_encode_baud_rate(termios,
+ min + 1, min + 1);
+ else
+ tty_termios_encode_baud_rate(termios,
+ max - 1, max - 1);
+ }
}
-
+ /* Should never happen */
+ WARN_ON(1);
return 0;
}
@@ -2006,12 +2013,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* we're going to avoid suspending serial console */
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
@@ -2019,20 +2020,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
mutex_unlock(&port->mutex);
return 0;
}
- uport->suspended = 1;
+ if (console_suspend_enabled || !uart_console(uport))
+ uport->suspended = 1;
if (port->flags & ASYNC_INITIALIZED) {
const struct uart_ops *ops = uport->ops;
int tries;
- set_bit(ASYNCB_SUSPENDED, &port->flags);
- clear_bit(ASYNCB_INITIALIZED, &port->flags);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ set_bit(ASYNCB_SUSPENDED, &port->flags);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);
- spin_lock_irq(&uport->lock);
- ops->stop_tx(uport);
- ops->set_mctrl(uport, 0);
- ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
+ spin_lock_irq(&uport->lock);
+ ops->stop_tx(uport);
+ ops->set_mctrl(uport, 0);
+ ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);
+ }
/*
* Wait for the transmitter to empty.
@@ -2047,16 +2051,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
drv->dev_name,
drv->tty_driver->name_base + uport->line);
- ops->shutdown(uport);
+ if (console_suspend_enabled || !uart_console(uport))
+ ops->shutdown(uport);
}
/*
* Disable the console device before suspending.
*/
- if (uart_console(uport))
+ if (console_suspend_enabled && uart_console(uport))
console_stop(uport->cons);
- uart_change_pm(state, 3);
+ if (console_suspend_enabled || !uart_console(uport))
+ uart_change_pm(state, 3);
mutex_unlock(&port->mutex);
@@ -2073,29 +2079,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* no need to resume serial console, it wasn't suspended */
- /*
- * First try to use the console cflag setting.
- */
- memset(&termios, 0, sizeof(struct ktermios));
- termios.c_cflag = uport->cons->cflag;
- /*
- * If that's unset, use the tty termios setting.
- */
- if (termios.c_cflag == 0)
- termios = *state->port.tty->termios;
- else {
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_input_baud_rate(&termios);
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_baud_rate(&termios);
- }
- uport->ops->set_termios(uport, &termios, NULL);
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(uport->irq);
@@ -2121,21 +2104,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
spin_lock_irq(&uport->lock);
ops->set_mctrl(uport, 0);
spin_unlock_irq(&uport->lock);
- ret = ops->startup(uport);
- if (ret == 0) {
- uart_change_speed(state, NULL);
- spin_lock_irq(&uport->lock);
- ops->set_mctrl(uport, uport->mctrl);
- ops->start_tx(uport);
- spin_unlock_irq(&uport->lock);
- set_bit(ASYNCB_INITIALIZED, &port->flags);
- } else {
- /*
- * Failed to resume - maybe hardware went away?
- * Clear the "initialized" flag so we won't try
- * to call the low level drivers shutdown method.
- */
- uart_shutdown(state);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ ret = ops->startup(uport);
+ if (ret == 0) {
+ uart_change_speed(state, NULL);
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, uport->mctrl);
+ ops->start_tx(uport);
+ spin_unlock_irq(&uport->lock);
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
+ } else {
+ /*
+ * Failed to resume - maybe hardware went away?
+ * Clear the "initialized" flag so we won't try
+ * to call the low level drivers shutdown method.
+ */
+ uart_shutdown(state);
+ }
}
clear_bit(ASYNCB_SUSPENDED, &port->flags);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 0ee7239c5d6..df854401af2 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- outb(12, info->c950ctrl + 1);
+ if (info->c950ctrl)
+ outb(12, info->c950ctrl + 1);
}
/* request_region? oxsemi branch does no request_region too... */
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index ff38dbdb5c6..42f3333c4ad 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
Set SCP6MD1,0 = {01} (output) */
__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
- data = ctrl_inb(SCPDR);
+ data = __raw_readb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
- ctrl_outb(data & 0xbf, SCPDR);
+ __raw_writeb(data & 0xbf, SCPDR);
}
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
@@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port)
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- unsigned int status, baud, smr_val;
+ unsigned int status, baud, smr_val, max_baud;
int t = -1;
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- if (likely(baud))
+ /*
+ * earlyprintk comes here early on with port->uartclk set to zero.
+ * the clock framework is not up and running at this point so here
+ * we assume that 115200 is the maximum baud rate. please note that
+ * the baud rate is not programmed during earlyprintk - it is assumed
+ * that the previous boot loader has enabled required clocks and
+ * setup the baud rate generator hardware for us already.
+ */
+ max_baud = port->uartclk ? port->uartclk / 16 : 115200;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
+ if (likely(baud && port->uartclk))
t = SCBRR_VALUE(baud, port->uartclk);
do {
@@ -1042,11 +1052,26 @@ static void __devinit sci_init_single(struct platform_device *dev,
sci_port->port.ops = &sci_uart_ops;
sci_port->port.iotype = UPIO_MEM;
sci_port->port.line = index;
- sci_port->port.fifosize = 1;
- sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
- sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
- sci_port->enable = sci_clk_enable;
- sci_port->disable = sci_clk_disable;
+
+ switch (p->type) {
+ case PORT_SCIFA:
+ sci_port->port.fifosize = 64;
+ break;
+ case PORT_SCIF:
+ sci_port->port.fifosize = 16;
+ break;
+ default:
+ sci_port->port.fifosize = 1;
+ break;
+ }
+
+ if (dev) {
+ sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+ sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
+ sci_port->enable = sci_clk_enable;
+ sci_port->disable = sci_clk_disable;
+ sci_port->port.dev = &dev->dev;
+ }
sci_port->break_timer.data = (unsigned long)sci_port;
sci_port->break_timer.function = sci_break_timer;
@@ -1057,7 +1082,6 @@ static void __devinit sci_init_single(struct platform_device *dev,
sci_port->port.irq = p->irqs[SCIx_TXI_IRQ];
sci_port->port.flags = p->flags;
- sci_port->port.dev = &dev->dev;
sci_port->type = sci_port->port.type = p->type;
memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
@@ -1101,7 +1125,7 @@ static void serial_console_write(struct console *co, const char *s,
sci_port->disable(port);
}
-static int __init serial_console_setup(struct console *co, char *options)
+static int __devinit serial_console_setup(struct console *co, char *options)
{
struct sci_port *sci_port;
struct uart_port *port;
@@ -1119,9 +1143,14 @@ static int __init serial_console_setup(struct console *co, char *options)
if (co->index >= SCI_NPORTS)
co->index = 0;
- sci_port = &sci_ports[co->index];
- port = &sci_port->port;
- co->data = port;
+ if (co->data) {
+ port = co->data;
+ sci_port = to_sci_port(port);
+ } else {
+ sci_port = &sci_ports[co->index];
+ port = &sci_port->port;
+ co->data = port;
+ }
/*
* Also need to check port->type, we don't actually have any
@@ -1165,6 +1194,15 @@ static int __init sci_console_init(void)
return 0;
}
console_initcall(sci_console_init);
+
+static struct sci_port early_serial_port;
+static struct console early_serial_console = {
+ .name = "early_ttySC",
+ .write = serial_console_write,
+ .flags = CON_PRINTBUFFER,
+};
+static char early_serial_buf[32];
+
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
@@ -1250,6 +1288,21 @@ static int __devinit sci_probe(struct platform_device *dev)
struct sh_sci_priv *priv;
int i, ret = -EINVAL;
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+ if (is_early_platform_device(dev)) {
+ if (dev->id == -1)
+ return -ENOTSUPP;
+ early_serial_console.index = dev->id;
+ early_serial_console.data = &early_serial_port.port;
+ sci_init_single(NULL, &early_serial_port, dev->id, p);
+ serial_console_setup(&early_serial_console, early_serial_buf);
+ if (!strstr(early_serial_buf, "keep"))
+ early_serial_console.flags |= CON_BOOT;
+ register_console(&early_serial_console);
+ return 0;
+ }
+#endif
+
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -1312,7 +1365,7 @@ static int sci_resume(struct device *dev)
return 0;
}
-static struct dev_pm_ops sci_dev_pm_ops = {
+static const struct dev_pm_ops sci_dev_pm_ops = {
.suspend = sci_suspend,
.resume = sci_resume,
};
@@ -1349,6 +1402,10 @@ static void __exit sci_exit(void)
uart_unregister_driver(&sci_uart_driver);
}
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+early_platform_init_buffer("earlyprintk", &sci_driver,
+ early_serial_buf, ARRAY_SIZE(early_serial_buf));
+#endif
module_init(sci_init);
module_exit(sci_exit);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index a32094eeb42..0efcded59ae 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -517,20 +517,20 @@ static const struct __attribute__((packed)) {
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfffffe80)
- return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */
+ return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */
if (port->mapbase == 0xa4000150)
- return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+ return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xa4000140)
- return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+ return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == SCIF0)
- return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+ return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
if (port->mapbase == SCIF2)
- return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+ return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
@@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
- return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
+ return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
if (port->mapbase == 0xffe80000)
- return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe80000)
- return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfe4b0000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0;
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0;
if (port->mapbase == 0xfe4c0000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0;
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0;
if (port->mapbase == 0xfe4d0000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0;
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfe600000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfe610000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfe620000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe10000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe20000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe30000)
- return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
- return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
+ return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
- return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
+ return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
if (port->mapbase == 0xffe10000)
- return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
+ return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
if (port->mapbase == 0xffe20000)
- return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
+ return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
return 1;
}
@@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
- return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
+ return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
if (port->mapbase == 0xffe10000)
- return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
+ return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
if (port->mapbase == 0xffe20000)
- return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
+ return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
if (port->mapbase == 0xa4e30000)
- return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
+ return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
if (port->mapbase == 0xa4e40000)
- return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
+ return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
if (port->mapbase == 0xa4e50000)
- return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
+ return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
@@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->type == PORT_SCIF)
- return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0;
+ return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0;
if (port->type == PORT_SCIFA)
- return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+ return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
@@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe08000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe10000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
return 1;
}
@@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xff923000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xff924000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xff925000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffe10000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
@@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffea0000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffeb0000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffec0000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffed0000)
- return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffee0000)
- return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffef0000)
- return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
@@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfffe8000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffe8800)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffe9000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffe9800)
- return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
#if defined(CONFIG_CPU_SUBTYPE_SH7201)
if (port->mapbase == 0xfffeA000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffeA800)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffeB000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffeB800)
- return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
#endif
return 1;
}
@@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xf8400000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xf8410000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xf8420000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffc30000)
- return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffc40000)
- return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffc50000)
- return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xffc60000)
- return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-05 12:07:29 +0000