summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c2
-rw-r--r--drivers/serial/Kconfig14
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c12
-rw-r--r--drivers/serial/icom.c1
-rw-r--r--drivers/serial/jsm/jsm_neo.c7
-rw-r--r--drivers/serial/jsm/jsm_tty.c1
-rw-r--r--drivers/serial/s3c2410.c6
-rw-r--r--drivers/serial/serial_txx9.c32
8 files changed, 29 insertions, 46 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c9832d963f1..48e259a0167 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -994,7 +994,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
* be frobbing the chips IRQ enable register to see if it exists.
*/
spin_lock_irqsave(&up->port.lock, flags);
-// save_flags(flags); cli();
up->capabilities = 0;
up->bugs = 0;
@@ -1151,7 +1150,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
out:
spin_unlock_irqrestore(&up->port.lock, flags);
-// restore_flags(flags);
DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 924e9bd757f..e8efe938c4e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -73,17 +73,21 @@ config SERIAL_8250_PCI
depends on SERIAL_8250 && PCI
default SERIAL_8250
help
- This builds standard PCI serial support. You may be able to
- disable this feature if you only need legacy serial support.
- Saves about 9K.
+ Say Y here if you have PCI serial ports.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_pci.
config SERIAL_8250_PNP
tristate "8250/16550 PNP device support" if EMBEDDED
depends on SERIAL_8250 && PNP
default SERIAL_8250
help
- This builds standard PNP serial support. You may be able to
- disable this feature if you only need legacy serial support.
+ Say Y here if you have serial ports described by PNPBIOS or ACPI.
+ These are typically ports built into the system board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_pnp.
config SERIAL_8250_HP300
tristate
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 7a3b97fdf8d..f23972bc00c 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -934,7 +934,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.irq = SMC1_IRQ,
.ops = &cpm_uart_pops,
.iotype = UPIO_MEM,
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SMC1].port.lock),
},
.flags = FLAG_SMC,
.tx_nrfifos = TX_NUM_FIFO,
@@ -948,7 +948,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.irq = SMC2_IRQ,
.ops = &cpm_uart_pops,
.iotype = UPIO_MEM,
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SMC2].port.lock),
},
.flags = FLAG_SMC,
.tx_nrfifos = TX_NUM_FIFO,
@@ -965,7 +965,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.irq = SCC1_IRQ,
.ops = &cpm_uart_pops,
.iotype = UPIO_MEM,
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC1].port.lock),
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
@@ -979,7 +979,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.irq = SCC2_IRQ,
.ops = &cpm_uart_pops,
.iotype = UPIO_MEM,
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC2].port.lock),
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
@@ -993,7 +993,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.irq = SCC3_IRQ,
.ops = &cpm_uart_pops,
.iotype = UPIO_MEM,
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC3].port.lock),
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
@@ -1007,7 +1007,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
.irq = SCC4_IRQ,
.ops = &cpm_uart_pops,
.iotype = UPIO_MEM,
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC4].port.lock),
},
.tx_nrfifos = TX_NUM_FIFO,
.tx_fifosize = TX_BUF_SIZE,
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 246c5572667..6202995e821 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -47,7 +47,6 @@
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/smp.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/kobject.h>
#include <linux/firmware.h>
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 8be8da37f62..b2d6f5b1a7c 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -581,8 +581,13 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
return;
/* Scrub off lower bits. They signify delta's, which I don't care about */
- msignals &= 0xf0;
+ /* Keep DDCD and DDSR though */
+ msignals &= 0xf8;
+ if (msignals & UART_MSR_DDCD)
+ uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD);
+ if (msignals & UART_MSR_DDSR)
+ uart_handle_cts_change(&ch->uart_port, msignals & UART_MSR_CTS);
if (msignals & UART_MSR_DCD)
ch->ch_mistat |= UART_MSR_DCD;
else
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index be22bbdbc8e..281f23a371b 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -448,6 +448,7 @@ int jsm_uart_port_init(struct jsm_board *brd)
continue;
brd->channels[i]->uart_port.irq = brd->irq;
+ brd->channels[i]->uart_port.uartclk = 14745600;
brd->channels[i]->uart_port.type = PORT_JSM;
brd->channels[i]->uart_port.iotype = UPIO_MEM;
brd->channels[i]->uart_port.membase = brd->re_map_membase;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 3ba9208ebd0..10bc0209cd6 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -957,7 +957,7 @@ static struct uart_driver s3c24xx_uart_drv = {
static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
[0] = {
.port = {
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
.iotype = UPIO_MEM,
.irq = IRQ_S3CUART_RX0,
.uartclk = 0,
@@ -969,7 +969,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
},
[1] = {
.port = {
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock),
.iotype = UPIO_MEM,
.irq = IRQ_S3CUART_RX1,
.uartclk = 0,
@@ -983,7 +983,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
[2] = {
.port = {
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
.iotype = UPIO_MEM,
.irq = IRQ_S3CUART_RX2,
.uartclk = 0,
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 509ace7e688..1deb5764326 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -15,31 +15,6 @@
* published by the Free Software Foundation.
*
* Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller
- *
- * Revision History:
- * 0.30 Initial revision. (Renamed from serial_txx927.c)
- * 0.31 Use save_flags instead of local_irq_save.
- * 0.32 Support SCLK.
- * 0.33 Switch TXX9_TTY_NAME by CONFIG_SERIAL_TXX9_STDSERIAL.
- * Support TIOCSERGETLSR.
- * 0.34 Support slow baudrate.
- * 0.40 Merge codes from mainstream kernel (2.4.22).
- * 0.41 Fix console checking in rs_shutdown_port().
- * Disable flow-control in serial_console_write().
- * 0.42 Fix minor compiler warning.
- * 1.00 Kernel 2.6. Converted to new serial core (based on 8250.c).
- * 1.01 Set fifosize to make tx_empry called properly.
- * Use standard uart_get_divisor.
- * 1.02 Cleanup. (import 8250.c changes)
- * 1.03 Fix low-latency mode. (import 8250.c changes)
- * 1.04 Remove usage of deprecated functions, cleanup.
- * 1.05 More strict check in verify_port. Cleanup.
- * 1.06 Do not insert a char caused previous overrun.
- * Fix some spin_locks.
- * Do not call uart_add_one_port for absent ports.
- * 1.07 Use CONFIG_SERIAL_TXX9_NR_UARTS. Cleanup.
- * 1.08 Use platform_device.
- * Fix and cleanup suspend/resume/initialization codes.
*/
#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -62,7 +37,7 @@
#include <asm/io.h>
-static char *serial_version = "1.08";
+static char *serial_version = "1.09";
static char *serial_name = "TX39/49 Serial driver";
#define PASS_LIMIT 256
@@ -70,13 +45,14 @@ static char *serial_name = "TX39/49 Serial driver";
#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL)
/* "ttyS" is used for standard serial driver */
#define TXX9_TTY_NAME "ttyTX"
-#define TXX9_TTY_MINOR_START (64 + 64) /* ttyTX0(128), ttyTX1(129) */
+#define TXX9_TTY_MINOR_START 196
+#define TXX9_TTY_MAJOR 204
#else
/* acts like standard serial driver */
#define TXX9_TTY_NAME "ttyS"
#define TXX9_TTY_MINOR_START 64
-#endif
#define TXX9_TTY_MAJOR TTY_MAJOR
+#endif
/* flag aliases */
#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 21:13:01 +0000