summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c16
-rw-r--r--drivers/serial/Kconfig31
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/amba-pl010.c15
-rw-r--r--drivers/serial/imx.c2
-rw-r--r--drivers/serial/s3c2412.c1
-rw-r--r--drivers/serial/s5pv210.c154
-rw-r--r--drivers/serial/samsung.c8
-rw-r--r--drivers/serial/samsung.h19
-rw-r--r--drivers/serial/sh-sci.h22
10 files changed, 242 insertions, 27 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 7c4ebe6ee18..c3db16b7afa 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2408,6 +2408,21 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
}
static void
+serial8250_set_ldisc(struct uart_port *port)
+{
+ int line = port->line;
+
+ if (line >= port->state->port.tty->driver->num)
+ return;
+
+ if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+ port->flags |= UPF_HARDPPS_CD;
+ serial8250_enable_ms(port);
+ } else
+ port->flags &= ~UPF_HARDPPS_CD;
+}
+
+static void
serial8250_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
@@ -2628,6 +2643,7 @@ static struct uart_ops serial8250_pops = {
.startup = serial8250_startup,
.shutdown = serial8250_shutdown,
.set_termios = serial8250_set_termios,
+ .set_ldisc = serial8250_set_ldisc,
.pm = serial8250_pm,
.type = serial8250_type,
.release_port = serial8250_release_port,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d6ff7339562..f55c49475a8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@ config SERIAL_SAMSUNG
provide all of these ports, depending on how the serial port
pins are configured.
+config SERIAL_SAMSUNG_UARTS_4
+ bool
+ depends on ARM && PLAT_SAMSUNG
+ default y if CPU_S3C2443
+ help
+ Internal node for the common case of 4 Samsung compatible UARTs
+
config SERIAL_SAMSUNG_UARTS
int
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
default 2 if ARCH_S3C2400
- default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+ default 4 if SERIAL_SAMSUNG_UARTS_4
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@ config SERIAL_S3C24A0
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+ tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+ select SERIAL_SAMSUNG_UARTS_4
default y
help
- Serial port support for the Samsung S3C6400 and S3C6410
+ Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
SoCs
config SERIAL_S5PC100
tristate "Samsung S5PC100 Serial port support"
depends on SERIAL_SAMSUNG && CPU_S5PC100
+ select SERIAL_SAMSUNG_UARTS_4
default y
help
Serial port support for the Samsung S5PC100 SoCs
+config SERIAL_S5PV210
+ tristate "Samsung S5PV210 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+ select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+ default y
+ help
+ Serial port support for Samsung's S5P Family of SoC's
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
@@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on HAVE_CLK && (SUPERH || H8300)
+ depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 5548fe7df61..6aa4723b74e 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 429a8ae8693..e4b3c2c88bb 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -471,6 +471,20 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&uap->port.lock, flags);
}
+static void pl010_set_ldisc(struct uart_port *port)
+{
+ int line = port->line;
+
+ if (line >= port->state->port.tty->driver->num)
+ return;
+
+ if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+ port->flags |= UPF_HARDPPS_CD;
+ pl010_enable_ms(port);
+ } else
+ port->flags &= ~UPF_HARDPPS_CD;
+}
+
static const char *pl010_type(struct uart_port *port)
{
return port->type == PORT_AMBA ? "AMBA" : NULL;
@@ -531,6 +545,7 @@ static struct uart_ops amba_pl010_pops = {
.startup = pl010_startup,
.shutdown = pl010_shutdown,
.set_termios = pl010_set_termios,
+ .set_ldisc = pl010_set_ldisc,
.type = pl010_type,
.release_port = pl010_release_port,
.request_port = pl010_request_port,
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index d00fcf8e6c7..e579d7a1807 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -440,7 +440,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
temp = readl(sport->port.membase + USR2);
if (temp & USR2_BRCD) {
- writel(temp | USR2_BRCD, sport->port.membase + USR2);
+ writel(USR2_BRCD, sport->port.membase + USR2);
if (uart_handle_break(&sport->port))
continue;
}
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce75e28e36e..1700b1a2fb7 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c2412_uart_inf = {
.name = "Samsung S3C2412 UART",
.type = PORT_S3C2412,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
new file mode 100644
index 00000000000..8dc03837617
--- /dev/null
+++ b/drivers/serial/s5pv210.c
@@ -0,0 +1,154 @@
+/* linux/drivers/serial/s5pv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on drivers/serial/s3c6400.c
+ *
+ * Driver for Samsung S5PV210 SoC UARTs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/regs-serial.h>
+#include "samsung.h"
+
+static int s5pv210_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ if (strcmp(clk->name, "pclk") == 0)
+ ucon &= ~S5PV210_UCON_CLKMASK;
+ else if (strcmp(clk->name, "uclk1") == 0)
+ ucon |= S5PV210_UCON_CLKMASK;
+ else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s5pv210_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ u32 ucon = rd_regl(port, S3C2410_UCON);
+
+ clk->divisor = 1;
+
+ switch (ucon & S5PV210_UCON_CLKMASK) {
+ case S5PV210_UCON_PCLK:
+ clk->name = "pclk";
+ break;
+ case S5PV210_UCON_UCLK:
+ clk->name = "uclk1";
+ break;
+ }
+
+ return 0;
+}
+
+static int s5pv210_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ ucon &= S5PV210_UCON_CLKMASK;
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+#define S5PV210_UART_DEFAULT_INFO(fifo_size) \
+ .name = "Samsung S5PV210 UART0", \
+ .type = PORT_S3C6400, \
+ .fifosize = fifo_size, \
+ .has_divslot = 1, \
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
+ .get_clksrc = s5pv210_serial_getsource, \
+ .set_clksrc = s5pv210_serial_setsource, \
+ .reset_port = s5pv210_serial_resetport
+
+static struct s3c24xx_uart_info s5p_port_fifo256 = {
+ S5PV210_UART_DEFAULT_INFO(256),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo64 = {
+ S5PV210_UART_DEFAULT_INFO(64),
+};
+
+static struct s3c24xx_uart_info s5p_port_fifo16 = {
+ S5PV210_UART_DEFAULT_INFO(16),
+};
+
+static struct s3c24xx_uart_info *s5p_uart_inf[] = {
+ [0] = &s5p_port_fifo256,
+ [1] = &s5p_port_fifo64,
+ [2] = &s5p_port_fifo16,
+ [3] = &s5p_port_fifo16,
+};
+
+/* device management */
+static int s5p_serial_probe(struct platform_device *pdev)
+{
+ return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
+}
+
+static struct platform_driver s5p_serial_drv = {
+ .probe = s5p_serial_probe,
+ .remove = __devexit_p(s3c24xx_serial_remove),
+ .driver = {
+ .name = "s5pv210-uart",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s5pv210_serial_console_init(void)
+{
+ return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
+}
+
+console_initcall(s5pv210_serial_console_init);
+
+static int __init s5p_serial_init(void)
+{
+ return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
+}
+
+static void __exit s5p_serial_exit(void)
+{
+ platform_driver_unregister(&s5p_serial_drv);
+}
+
+module_init(s5p_serial_init);
+module_exit(s5p_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s5pv210-uart");
+MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 52e3df113ec..a9d6c5626a0 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
unsigned long ufstat, utrstat;
if (ufcon & S3C2410_UFCON_FIFOMODE) {
- /* fifo mode - check ammount of data in fifo registers... */
+ /* fifo mode - check amount of data in fifo registers... */
ufstat = rd_regl(port, S3C2410_UFSTAT);
return (ufstat & info->tx_fifofull) ? 0 : 1;
@@ -1374,7 +1374,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
* data.
*/
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
{
struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
struct platform_device **platdev_ptr;
@@ -1385,7 +1385,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
platdev_ptr = s3c24xx_uart_devs;
for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
- s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+ s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
}
return 0;
@@ -1451,7 +1451,7 @@ static struct console s3c24xx_serial_console = {
};
int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info *info)
+ struct s3c24xx_uart_info **info)
{
struct platform_device *dev = s3c24xx_uart_devs[0];
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 1fb22343df4..0ac06a07d25 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -75,19 +75,24 @@ extern int s3c24xx_serial_probe(struct platform_device *dev,
extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info *uart);
+ struct s3c24xx_uart_info **uart);
extern int s3c24xx_serial_init(struct platform_driver *drv,
struct s3c24xx_uart_info *info);
#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
-#define s3c24xx_console_init(__drv, __inf) \
-static int __init s3c_serial_console_init(void) \
-{ \
- return s3c24xx_serial_initconsole(__drv, __inf); \
-} \
- \
+#define s3c24xx_console_init(__drv, __inf) \
+static int __init s3c_serial_console_init(void) \
+{ \
+ struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \
+ int i; \
+ \
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \
+ uinfo[i] = __inf; \
+ return s3c24xx_serial_initconsole(__drv, uinfo); \
+} \
+ \
console_initcall(s3c_serial_console_init)
#else
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f7d2589926d..fad67d33b0b 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -30,7 +30,8 @@
*/
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define PORT_PTCR 0xA405011EUL
# define PORT_PVCR 0xA4050122UL
@@ -228,7 +229,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
# define SCIF_ORER 0x0200
# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
# define SCIF_RFDC_MASK 0x007f
@@ -261,7 +263,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
@@ -356,7 +359,7 @@
SCI_OUT(sci_size, sci_offset, value); \
}
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -366,7 +369,8 @@
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -401,7 +405,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -413,7 +418,7 @@ SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
-SCIF_FNS(SCLSR, 0x24, 16)
+SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
@@ -583,7 +588,8 @@ static inline int sci_rxd_in(struct uart_port *port)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_ARCH_SHMOBILE)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 22:57:02 +0000