diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/8250.c | 58 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/amba-pl011.c | 30 | ||||
| -rw-r--r-- | drivers/serial/kgdboc.c | 168 | ||||
| -rw-r--r-- | drivers/serial/serial_core.c | 74 |
6 files changed, 330 insertions, 4 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 77f7a7f0646..96a585e1cee 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1740,6 +1740,60 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) } } +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial8250_get_poll_char(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned char lsr = serial_inp(up, UART_LSR); + + while (!(lsr & UART_LSR_DR)) + lsr = serial_inp(up, UART_LSR); + + return serial_inp(up, UART_RX); +} + + +static void serial8250_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_8250_port *up = (struct uart_8250_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + wait_for_xmitr(up, BOTH_EMPTY); + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, c); + if (c == 10) { + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_TX, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + static int serial8250_startup(struct uart_port *port) { struct uart_8250_port *up = (struct uart_8250_port *)port; @@ -2386,6 +2440,10 @@ static struct uart_ops serial8250_pops = { .request_port = serial8250_request_port, .config_port = serial8250_config_port, .verify_port = serial8250_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, +#endif }; static struct uart_8250_port serial8250_ports[UART_NR]; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index cf627cd1b4c..f7cd9504d81 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -961,6 +961,9 @@ config SERIAL_CORE config SERIAL_CORE_CONSOLE bool +config CONSOLE_POLL + bool + config SERIAL_68328 bool "68328 serial support" depends on M68328 || M68EZ328 || M68VZ328 diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 640cfe44a56..3cbea549472 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -66,4 +66,5 @@ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o +obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o obj-$(CONFIG_SERIAL_QE) += ucc_uart.o diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 40604a09292..08adc1de4a7 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -314,6 +314,32 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&uap->port.lock, flags); } +#ifdef CONFIG_CONSOLE_POLL +static int pl010_get_poll_char(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status; + + do { + status = readw(uap->port.membase + UART01x_FR); + } while (status & UART01x_FR_RXFE); + + return readw(uap->port.membase + UART01x_DR); +} + +static void pl010_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + + writew(ch, uap->port.membase + UART01x_DR); +} + +#endif /* CONFIG_CONSOLE_POLL */ + static int pl011_startup(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -572,6 +598,10 @@ static struct uart_ops amba_pl011_pops = { .request_port = pl010_request_port, .config_port = pl010_config_port, .verify_port = pl010_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pl010_get_poll_char, + .poll_put_char = pl010_put_poll_char, +#endif }; static struct uart_amba_port *amba_ports[UART_NR]; diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c new file mode 100644 index 00000000000..9cf03327386 --- /dev/null +++ b/drivers/serial/kgdboc.c @@ -0,0 +1,168 @@ +/* + * Based on the same principle as kgdboe using the NETPOLL api, this + * driver uses a console polling api to implement a gdb serial inteface + * which is multiplexed on a console port. + * + * Maintainer: Jason Wessel <jason.wessel@windriver.com> + * + * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/kgdb.h> +#include <linux/tty.h> + +#define MAX_CONFIG_LEN 40 + +static struct kgdb_io kgdboc_io_ops; + +/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ +static int configured = -1; + +static char config[MAX_CONFIG_LEN]; +static struct kparam_string kps = { + .string = config, + .maxlen = MAX_CONFIG_LEN, +}; + +static struct tty_driver *kgdb_tty_driver; +static int kgdb_tty_line; + +static int kgdboc_option_setup(char *opt) +{ + if (strlen(opt) > MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdboc: config string too long\n"); + return -ENOSPC; + } + strcpy(config, opt); + + return 0; +} + +__setup("kgdboc=", kgdboc_option_setup); + +static int configure_kgdboc(void) +{ + struct tty_driver *p; + int tty_line = 0; + int err; + + err = kgdboc_option_setup(config); + if (err || !strlen(config) || isspace(config[0])) + goto noconfig; + + err = -ENODEV; + + p = tty_find_polling_driver(config, &tty_line); + if (!p) + goto noconfig; + + kgdb_tty_driver = p; + kgdb_tty_line = tty_line; + + err = kgdb_register_io_module(&kgdboc_io_ops); + if (err) + goto noconfig; + + configured = 1; + + return 0; + +noconfig: + config[0] = 0; + configured = 0; + + return err; +} + +static int __init init_kgdboc(void) +{ + /* Already configured? */ + if (configured == 1) + return 0; + + return configure_kgdboc(); +} + +static void cleanup_kgdboc(void) +{ + if (configured == 1) + kgdb_unregister_io_module(&kgdboc_io_ops); +} + +static int kgdboc_get_char(void) +{ + return kgdb_tty_driver->poll_get_char(kgdb_tty_driver, kgdb_tty_line); +} + +static void kgdboc_put_char(u8 chr) +{ + kgdb_tty_driver->poll_put_char(kgdb_tty_driver, kgdb_tty_line, chr); +} + +static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp) +{ + int len = strlen(kmessage); + + if (len >= MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdboc: config string too long\n"); + return -ENOSPC; + } + + /* Only copy in the string if the init function has not run yet */ + if (configured < 0) { + strcpy(config, kmessage); + return 0; + } + + if (kgdb_connected) { + printk(KERN_ERR + "kgdboc: Cannot reconfigure while KGDB is connected.\n"); + + return -EBUSY; + } + + strcpy(config, kmessage); + /* Chop out \n char as a result of echo */ + if (config[len - 1] == '\n') + config[len - 1] = '\0'; + + if (configured == 1) + cleanup_kgdboc(); + + /* Go and configure with the new params. */ + return configure_kgdboc(); +} + +static void kgdboc_pre_exp_handler(void) +{ + /* Increment the module count when the debugger is active */ + if (!kgdb_connected) + try_module_get(THIS_MODULE); +} + +static void kgdboc_post_exp_handler(void) +{ + /* decrement the module count when the debugger detaches */ + if (!kgdb_connected) + module_put(THIS_MODULE); +} + +static struct kgdb_io kgdboc_io_ops = { + .name = "kgdboc", + .read_char = kgdboc_get_char, + .write_char = kgdboc_put_char, + .pre_exception = kgdboc_pre_exp_handler, + .post_exception = kgdboc_post_exp_handler, +}; + +module_init(init_kgdboc); +module_exit(cleanup_kgdboc); +module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); +MODULE_PARM_DESC(kgdboc, "<serial_device>[,baud]"); +MODULE_DESCRIPTION("KGDB Console TTY Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 0f5a17987cc..c32c1ca75f6 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1771,7 +1771,7 @@ static int uart_read_proc(char *page, char **start, off_t off, } #endif -#ifdef CONFIG_SERIAL_CORE_CONSOLE +#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL) /* * uart_console_write - write a console message to a serial port * @port: the port to write the message @@ -1827,7 +1827,7 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * options. The format of the string is <baud><parity><bits><flow>, * eg: 115200n8r */ -void __init +void uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow) { char *s = options; @@ -1842,6 +1842,7 @@ uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow) if (*s) *flow = *s; } +EXPORT_SYMBOL_GPL(uart_parse_options); struct baud_rates { unsigned int rate; @@ -1872,7 +1873,7 @@ static const struct baud_rates baud_rates[] = { * @bits: number of data bits * @flow: flow control character - 'r' (rts) */ -int __init +int uart_set_options(struct uart_port *port, struct console *co, int baud, int parity, int bits, int flow) { @@ -1924,10 +1925,16 @@ uart_set_options(struct uart_port *port, struct console *co, port->mctrl |= TIOCM_DTR; port->ops->set_termios(port, &termios, &dummy); - co->cflag = termios.c_cflag; + /* + * Allow the setting of the UART parameters with a NULL console + * too: + */ + if (co) + co->cflag = termios.c_cflag; return 0; } +EXPORT_SYMBOL_GPL(uart_set_options); #endif /* CONFIG_SERIAL_CORE_CONSOLE */ static void uart_change_pm(struct uart_state *state, int pm_state) @@ -2182,6 +2189,60 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, } } +#ifdef CONFIG_CONSOLE_POLL + +static int uart_poll_init(struct tty_driver *driver, int line, char *options) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (!state || !state->port) + return -1; + + port = state->port; + if (!(port->ops->poll_get_char && port->ops->poll_put_char)) + return -1; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(port, NULL, baud, parity, bits, flow); + } + + return 0; +} + +static int uart_poll_get_char(struct tty_driver *driver, int line) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + + if (!state || !state->port) + return -1; + + port = state->port; + return port->ops->poll_get_char(port); +} + +static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + + if (!state || !state->port) + return; + + port = state->port; + port->ops->poll_put_char(port, ch); +} +#endif + static const struct tty_operations uart_ops = { .open = uart_open, .close = uart_close, @@ -2206,6 +2267,11 @@ static const struct tty_operations uart_ops = { #endif .tiocmget = uart_tiocmget, .tiocmset = uart_tiocmset, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = uart_poll_init, + .poll_get_char = uart_poll_get_char, + .poll_put_char = uart_poll_put_char, +#endif }; /** |