diff options
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/8250.c | 2 | ||||
-rw-r--r-- | drivers/serial/8250_pci.c | 86 | ||||
-rw-r--r-- | drivers/serial/atmel_serial.c | 2 | ||||
-rw-r--r-- | drivers/serial/mpc52xx_uart.c | 2 | ||||
-rw-r--r-- | drivers/serial/serial_core.c | 7 | ||||
-rw-r--r-- | drivers/serial/sh-sci.c | 2 |
6 files changed, 94 insertions, 7 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b1ae774016f..737b4c96097 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1089,7 +1089,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) if (!up->port.iobase && !up->port.mapbase && !up->port.membase) return; - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", serial_index(&up->port), up->port.iobase, up->port.membase); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index e7108e75653..b28af13c45a 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1561,11 +1561,16 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_exar_ibm_saturn, pbn_pasemi_1682M, pbn_ni8430_2, pbn_ni8430_4, pbn_ni8430_8, pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, }; /* @@ -2146,6 +2151,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 0x200, }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + /* * PA Semi PWRficient PA6T-1682M on-chip UART */ @@ -2185,6 +2197,37 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 0x10, .first_offset = 0x800, }, + /* + * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -2340,7 +2383,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) break; #ifdef SERIAL_DEBUG_PCI - printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n", + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); #endif @@ -2649,6 +2692,9 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, @@ -3093,6 +3139,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, @@ -3556,6 +3608,38 @@ static struct pci_device_id serial_pci_tbl[] = { 0, pbn_b0_8_115200 }, + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3551c5cb709..9d948bccafa 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1531,7 +1531,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) void *data; int ret; - BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE)); + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); port = &atmel_ports[pdev->id]; port->backup_imr = 0; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index d7bcd074d38..7ce9e9f567a 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -705,7 +705,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) return -EINVAL; if ((ser->irq != port->irq) || - (ser->io_type != SERIAL_IO_MEM) || + (ser->io_type != UPIO_MEM) || (ser->baud_base != port->uartclk) || (ser->iomem_base != (void *)port->mapbase) || (ser->hub6 != 0)) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 1689bda1d13..dcc72444e8e 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1270,6 +1270,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) BUG_ON(!kernel_locked()); + if (!state) + return; + uport = state->uart_port; port = &state->port; @@ -1316,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) */ if (port->flags & ASYNC_INITIALIZED) { unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&uport->lock, flags); uport->ops->stop_rx(uport); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&uport->lock, flags); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 85119fb7cb5..6498bd1fb6d 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1143,7 +1143,7 @@ static void serial_console_write(struct console *co, const char *s, while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); - if (sci_port->disable); + if (sci_port->disable) sci_port->disable(port); } |