diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/21285.c | 4 | ||||
| -rw-r--r-- | drivers/serial/8250.c | 24 | ||||
| -rw-r--r-- | drivers/serial/8250_pnp.c | 2 | ||||
| -rw-r--r-- | drivers/serial/ioc3_serial.c | 4 | ||||
| -rw-r--r-- | drivers/serial/ioc4_serial.c | 20 | ||||
| -rw-r--r-- | drivers/serial/jsm/jsm.h | 8 | ||||
| -rw-r--r-- | drivers/serial/jsm/jsm_driver.c | 48 | ||||
| -rw-r--r-- | drivers/serial/jsm/jsm_neo.c | 8 | ||||
| -rw-r--r-- | drivers/serial/jsm/jsm_tty.c | 6 | ||||
| -rw-r--r-- | drivers/serial/pmac_zilog.c | 11 | ||||
| -rw-r--r-- | drivers/serial/pxa.c | 15 | ||||
| -rw-r--r-- | drivers/serial/serial_core.c | 33 | ||||
| -rw-r--r-- | drivers/serial/serial_cs.c | 15 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 89 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 118 | ||||
| -rw-r--r-- | drivers/serial/ucc_uart.c | 8 |
16 files changed, 273 insertions, 140 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 1e3d19397a5..8681f134505 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -58,7 +58,7 @@ static const char serial21285_name[] = "Footbridge UART"; static void serial21285_stop_tx(struct uart_port *port) { if (tx_enabled(port)) { - disable_irq(IRQ_CONTX); + disable_irq_nosync(IRQ_CONTX); tx_enabled(port) = 0; } } @@ -74,7 +74,7 @@ static void serial21285_start_tx(struct uart_port *port) static void serial21285_stop_rx(struct uart_port *port) { if (rx_enabled(port)) { - disable_irq(IRQ_CONRX); + disable_irq_nosync(IRQ_CONRX); rx_enabled(port) = 0; } } diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 737b4c96097..c3e37c8e7e2 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1339,14 +1339,12 @@ static void serial8250_start_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); if (up->bugs & UART_BUG_TXEN) { - unsigned char lsr, iir; + unsigned char lsr; lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - iir = serial_in(up, UART_IIR) & 0x0f; if ((up->port.type == PORT_RM9000) ? - (lsr & UART_LSR_THRE && - (iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) : - (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)) + (lsr & UART_LSR_THRE) : + (lsr & UART_LSR_TEMT)) transmit_chars(up); } } @@ -2646,7 +2644,7 @@ static void __init serial8250_isa_init_ports(void) { struct uart_8250_port *up; static int first = 1; - int i; + int i, irqflag = 0; if (!first) return; @@ -2670,6 +2668,9 @@ static void __init serial8250_isa_init_ports(void) up->port.ops = &serial8250_pops; } + if (share_irqs) + irqflag = IRQF_SHARED; + for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++, up++) { @@ -2683,8 +2684,7 @@ static void __init serial8250_isa_init_ports(void) up->port.iotype = old_serial_port[i].io_type; up->port.regshift = old_serial_port[i].iomem_reg_shift; set_io_from_upio(&up->port); - if (share_irqs) - up->port.irqflags |= IRQF_SHARED; + up->port.irqflags |= irqflag; } } @@ -2940,10 +2940,13 @@ static int __devinit serial8250_probe(struct platform_device *dev) { struct plat_serial8250_port *p = dev->dev.platform_data; struct uart_port port; - int ret, i; + int ret, i, irqflag = 0; memset(&port, 0, sizeof(struct uart_port)); + if (share_irqs) + irqflag = IRQF_SHARED; + for (i = 0; p && p->flags != 0; p++, i++) { port.iobase = p->iobase; port.membase = p->membase; @@ -2960,8 +2963,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.serial_in = p->serial_in; port.serial_out = p->serial_out; port.dev = &dev->dev; - if (share_irqs) - port.irqflags |= IRQF_SHARED; + port.irqflags |= irqflag; ret = serial8250_register_port(&port); if (ret < 0) { dev_err(&dev->dev, "unable to register port at index %d " diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 36ede02ceac..b5496a19d96 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -354,6 +354,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E5", 0 }, /* Fujitsu P-series tablet PC device */ { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index d8983dd5c4b..85dc0410ac1 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2162,7 +2162,7 @@ static struct ioc3_submodule ioc3uart_ops = { /** * ioc3_detect - module init called, */ -static int __devinit ioc3uart_init(void) +static int __init ioc3uart_init(void) { int ret; @@ -2179,7 +2179,7 @@ static int __devinit ioc3uart_init(void) return ret; } -static void __devexit ioc3uart_exit(void) +static void __exit ioc3uart_exit(void) { ioc3_unregister_submodule(&ioc3uart_ops); uart_unregister_driver(&ioc3_uart); diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 2e02c3026d2..836d9ab4f72 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -2904,7 +2904,7 @@ static struct ioc4_submodule ioc4_serial_submodule = { /** * ioc4_serial_init - module init */ -int ioc4_serial_init(void) +static int __init ioc4_serial_init(void) { int ret; @@ -2913,20 +2913,30 @@ int ioc4_serial_init(void) printk(KERN_WARNING "%s: Couldn't register rs232 IOC4 serial driver\n", __func__); - return ret; + goto out; } if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { printk(KERN_WARNING "%s: Couldn't register rs422 IOC4 serial driver\n", __func__); - return ret; + goto out_uart_rs232; } /* register with IOC4 main module */ - return ioc4_register_submodule(&ioc4_serial_submodule); + ret = ioc4_register_submodule(&ioc4_serial_submodule); + if (ret) + goto out_uart_rs422; + return 0; + +out_uart_rs422: + uart_unregister_driver(&ioc4_uart_rs422); +out_uart_rs232: + uart_unregister_driver(&ioc4_uart_rs232); +out: + return ret; } -static void __devexit ioc4_serial_exit(void) +static void __exit ioc4_serial_exit(void) { ioc4_unregister_submodule(&ioc4_serial_submodule); uart_unregister_driver(&ioc4_uart_rs232); diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 4e5f3bde046..38a509c684c 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -138,7 +138,6 @@ struct jsm_board u32 nasync; /* Number of ports on card */ u32 irq; /* Interrupt request number */ - u64 intr_count; /* Count of interrupts */ u64 membase; /* Start of base memory of the card */ u64 membase_end; /* End of base memory of the card */ @@ -206,8 +205,6 @@ struct jsm_channel { u64 ch_close_delay; /* How long we should drop RTS/DTR for */ - u64 ch_cpstime; /* Time for CPS calculations */ - tcflag_t ch_c_iflag; /* channel iflags */ tcflag_t ch_c_cflag; /* channel cflags */ tcflag_t ch_c_oflag; /* channel oflags */ @@ -215,11 +212,6 @@ struct jsm_channel { u8 ch_stopc; /* Stop character */ u8 ch_startc; /* Start character */ - u32 ch_old_baud; /* Cache of the current baud */ - u32 ch_custom_speed;/* Custom baud, if set */ - - u32 ch_wopen; /* Waiting for open process cnt */ - u8 ch_mostat; /* FEP output modem status */ u8 ch_mistat; /* FEP input modem status */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index b3604aa322a..108c3e0471f 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -48,6 +48,17 @@ struct uart_driver jsm_uart_driver = { .nr = NR_PORTS, }; +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state); +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); +static void jsm_io_resume(struct pci_dev *pdev); + +static struct pci_error_handlers jsm_err_handler = { + .error_detected = jsm_io_error_detected, + .slot_reset = jsm_io_slot_reset, + .resume = jsm_io_resume, +}; + int jsm_debug; module_param(jsm_debug, int, 0); MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); @@ -123,7 +134,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device } rc = request_irq(brd->irq, brd->bd_ops->intr, - IRQF_DISABLED|IRQF_SHARED, "JSM", brd); + IRQF_SHARED, "JSM", brd); if (rc) { printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); goto out_iounmap; @@ -164,6 +175,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device } pci_set_drvdata(pdev, brd); + pci_save_state(pdev); return 0; out_free_irq: @@ -222,8 +234,42 @@ static struct pci_driver jsm_driver = { .id_table = jsm_pci_tbl, .probe = jsm_probe_one, .remove = __devexit_p(jsm_remove_one), + .err_handler = &jsm_err_handler, }; +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + jsm_remove_uart_port(brd); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) +{ + int rc; + + rc = pci_enable_device(pdev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_set_master(pdev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void jsm_io_resume(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + pci_restore_state(pdev); + + jsm_uart_port_init(brd); +} + static int __init jsm_init_module(void) { int rc; diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c index b4b124e4828..7960d9633c1 100644 --- a/drivers/serial/jsm/jsm_neo.c +++ b/drivers/serial/jsm/jsm_neo.c @@ -954,13 +954,8 @@ static void neo_param(struct jsm_channel *ch) ch->ch_flags |= (CH_BAUD0); ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); neo_assert_modem_signals(ch); - ch->ch_old_baud = 0; return; - } else if (ch->ch_custom_speed) { - baud = ch->ch_custom_speed; - if (ch->ch_flags & CH_BAUD0) - ch->ch_flags &= ~(CH_BAUD0); } else { int i; unsigned int cflag; @@ -1045,7 +1040,6 @@ static void neo_param(struct jsm_channel *ch) quot = ch->ch_bd->bd_dividend / baud; if (quot != 0) { - ch->ch_old_baud = baud; writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); writeb((quot & 0xff), &ch->ch_neo_uart->txrx); writeb((quot >> 8), &ch->ch_neo_uart->ier); @@ -1123,8 +1117,6 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) unsigned long lock_flags2; int outofloop_count = 0; - brd->intr_count++; - /* Lock out the slow poller from running on this board. */ spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 7439c037362..cd95e215550 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -296,8 +296,6 @@ static void jsm_tty_close(struct uart_port *port) bd->bd_ops->assert_modem_signals(channel); } - channel->ch_old_baud = 0; - /* Turn off UART interrupts for this port */ channel->ch_bd->bd_ops->uart_off(channel); @@ -432,7 +430,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) return 0; } -int __devinit jsm_uart_port_init(struct jsm_board *brd) +int jsm_uart_port_init(struct jsm_board *brd) { int i; unsigned int line; @@ -472,7 +470,7 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd) if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) printk(KERN_INFO "jsm: add device failed\n"); else - printk(KERN_INFO "Added device \n"); + printk(KERN_INFO "jsm: Port %d added\n", i); } jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 0700cd10b97..683e66f18e8 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap) goto ack_tx_int; } + /* Under some circumstances, we see interrupts reported for + * a closed channel. The interrupt mask in R1 is clear, but + * R3 still signals the interrupts and we see them when taking + * an interrupt for the other channel (this could be a qemu + * bug but since the ESCC doc doesn't specify precsiely whether + * R3 interrup status bits are masked by R1 interrupt enable + * bits, better safe than sorry). --BenH. + */ + if (!ZS_IS_OPEN(uap)) + goto ack_tx_int; + if (uap->port.x_char) { uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; write_zsdata(uap, uap->port.x_char); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index b8629d74f6a..56ee082157a 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -438,6 +438,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; + unsigned int dll; switch (termios->c_cflag & CSIZE) { case CS5: @@ -534,10 +535,18 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, else up->mcr &= ~UART_MCR_AFE; - serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + + /* + * work around Errata #75 according to Intel(R) PXA27x Processor Family + * Specification Update (Nov 2005) + */ + dll = serial_in(up, UART_DLL); + WARN_ON(dll != (quot & 0xff)); + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - serial_out(up, UART_LCR, cval); /* reset DLAB */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; /* Save LCR */ serial_pxa_set_mctrl(&up->port, up->port.mctrl); serial_out(up, UART_FCR, fcr); @@ -747,7 +756,7 @@ static int serial_pxa_resume(struct device *dev) return 0; } -static struct dev_pm_ops serial_pxa_pm_ops = { +static const struct dev_pm_ops serial_pxa_pm_ops = { .suspend = serial_pxa_suspend, .resume = serial_pxa_resume, }; diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index dcc72444e8e..047530b285b 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -342,11 +342,11 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, if (flags == UPF_SPD_HI) altbaud = 57600; - if (flags == UPF_SPD_VHI) + else if (flags == UPF_SPD_VHI) altbaud = 115200; - if (flags == UPF_SPD_SHI) + else if (flags == UPF_SPD_SHI) altbaud = 230400; - if (flags == UPF_SPD_WARP) + else if (flags == UPF_SPD_WARP) altbaud = 460800; for (try = 0; try < 2; try++) { @@ -1217,9 +1217,8 @@ static void uart_set_termios(struct tty_struct *tty, /* Handle transition to B0 status */ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR); - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { unsigned int mask = TIOCM_DTR; if (!(cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) @@ -1234,9 +1233,8 @@ static void uart_set_termios(struct tty_struct *tty, __uart_start(tty); spin_unlock_irqrestore(&state->uart_port->lock, flags); } - /* Handle turning on CRTSCTS */ - if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { + else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { spin_lock_irqsave(&state->uart_port->lock, flags); if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) { tty->hw_stopped = 1; @@ -2344,7 +2342,7 @@ static const struct tty_operations uart_ops = { */ int uart_register_driver(struct uart_driver *drv) { - struct tty_driver *normal = NULL; + struct tty_driver *normal; int i, retval; BUG_ON(drv->state); @@ -2354,13 +2352,12 @@ int uart_register_driver(struct uart_driver *drv) * we have a large number of ports to handle. */ drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); - retval = -ENOMEM; if (!drv->state) goto out; - normal = alloc_tty_driver(drv->nr); + normal = alloc_tty_driver(drv->nr); if (!normal) - goto out; + goto out_kfree; drv->tty_driver = normal; @@ -2393,12 +2390,14 @@ int uart_register_driver(struct uart_driver *drv) } retval = tty_register_driver(normal); - out: - if (retval < 0) { - put_tty_driver(normal); - kfree(drv->state); - } - return retval; + if (retval >= 0) + return retval; + + put_tty_driver(normal); +out_kfree: + kfree(drv->state); +out: + return -ENOMEM; } /** diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index fc413f0f8dd..0ee7239c5d6 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -819,6 +819,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ @@ -827,7 +828,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), @@ -861,6 +862,18 @@ static struct pcmcia_device_id serial_ids[] = { }; MODULE_DEVICE_TABLE(pcmcia, serial_ids); +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + static struct pcmcia_driver serial_cs_driver = { .owner = THIS_MODULE, .drv = { diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index ff38dbdb5c6..42f3333c4ad 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -222,9 +222,9 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) Set SCP6MD1,0 = {01} (output) */ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); - data = ctrl_inb(SCPDR); + data = __raw_readb(SCPDR); /* Set /RTS2 (bit6) = 0 */ - ctrl_outb(data & 0xbf, SCPDR); + __raw_writeb(data & 0xbf, SCPDR); } } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) @@ -897,11 +897,21 @@ static void sci_shutdown(struct uart_port *port) static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned int status, baud, smr_val; + unsigned int status, baud, smr_val, max_baud; int t = -1; - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - if (likely(baud)) + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + max_baud = port->uartclk ? port->uartclk / 16 : 115200; + + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); + if (likely(baud && port->uartclk)) t = SCBRR_VALUE(baud, port->uartclk); do { @@ -1042,11 +1052,26 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.ops = &sci_uart_ops; sci_port->port.iotype = UPIO_MEM; sci_port->port.line = index; - sci_port->port.fifosize = 1; - sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; - sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); - sci_port->enable = sci_clk_enable; - sci_port->disable = sci_clk_disable; + + switch (p->type) { + case PORT_SCIFA: + sci_port->port.fifosize = 64; + break; + case PORT_SCIF: + sci_port->port.fifosize = 16; + break; + default: + sci_port->port.fifosize = 1; + break; + } + + if (dev) { + sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; + sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); + sci_port->enable = sci_clk_enable; + sci_port->disable = sci_clk_disable; + sci_port->port.dev = &dev->dev; + } sci_port->break_timer.data = (unsigned long)sci_port; sci_port->break_timer.function = sci_break_timer; @@ -1057,7 +1082,6 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; sci_port->port.flags = p->flags; - sci_port->port.dev = &dev->dev; sci_port->type = sci_port->port.type = p->type; memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); @@ -1101,7 +1125,7 @@ static void serial_console_write(struct console *co, const char *s, sci_port->disable(port); } -static int __init serial_console_setup(struct console *co, char *options) +static int __devinit serial_console_setup(struct console *co, char *options) { struct sci_port *sci_port; struct uart_port *port; @@ -1119,9 +1143,14 @@ static int __init serial_console_setup(struct console *co, char *options) if (co->index >= SCI_NPORTS) co->index = 0; - sci_port = &sci_ports[co->index]; - port = &sci_port->port; - co->data = port; + if (co->data) { + port = co->data; + sci_port = to_sci_port(port); + } else { + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + co->data = port; + } /* * Also need to check port->type, we don't actually have any @@ -1165,6 +1194,15 @@ static int __init sci_console_init(void) return 0; } console_initcall(sci_console_init); + +static struct sci_port early_serial_port; +static struct console early_serial_console = { + .name = "early_ttySC", + .write = serial_console_write, + .flags = CON_PRINTBUFFER, +}; +static char early_serial_buf[32]; + #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) @@ -1250,6 +1288,21 @@ static int __devinit sci_probe(struct platform_device *dev) struct sh_sci_priv *priv; int i, ret = -EINVAL; +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + if (is_early_platform_device(dev)) { + if (dev->id == -1) + return -ENOTSUPP; + early_serial_console.index = dev->id; + early_serial_console.data = &early_serial_port.port; + sci_init_single(NULL, &early_serial_port, dev->id, p); + serial_console_setup(&early_serial_console, early_serial_buf); + if (!strstr(early_serial_buf, "keep")) + early_serial_console.flags |= CON_BOOT; + register_console(&early_serial_console); + return 0; + } +#endif + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -1312,7 +1365,7 @@ static int sci_resume(struct device *dev) return 0; } -static struct dev_pm_ops sci_dev_pm_ops = { +static const struct dev_pm_ops sci_dev_pm_ops = { .suspend = sci_suspend, .resume = sci_resume, }; @@ -1349,6 +1402,10 @@ static void __exit sci_exit(void) uart_unregister_driver(&sci_uart_driver); } +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +early_platform_init_buffer("earlyprintk", &sci_driver, + early_serial_buf, ARRAY_SIZE(early_serial_buf)); +#endif module_init(sci_init); module_exit(sci_exit); diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index a32094eeb42..0efcded59ae 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -517,20 +517,20 @@ static const struct __attribute__((packed)) { static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffffe80) - return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xa4000150) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xa4000140) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7705) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == SCIF0) - return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return __raw_readb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ if (port->mapbase == SCIF2) - return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return __raw_readb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) @@ -557,68 +557,68 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ + return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe80000) - return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7757) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe4b0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4c0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; if (port->mapbase == 0xfe4d0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfe600000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe610000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe620000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7343) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe20000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe30000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7366) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7722) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ + return __raw_readb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ + return __raw_readb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ + return __raw_readb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */ return 1; } @@ -626,17 +626,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ + return __raw_readb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */ if (port->mapbase == 0xffe10000) - return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ + return __raw_readb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */ if (port->mapbase == 0xffe20000) - return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ + return __raw_readb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */ if (port->mapbase == 0xa4e30000) - return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ + return __raw_readb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */ if (port->mapbase == 0xa4e40000) - return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ + return __raw_readb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */ if (port->mapbase == 0xa4e50000) - return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ + return __raw_readb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7724) @@ -645,9 +645,9 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->type == PORT_SCIF) - return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0; if (port->type == PORT_SCIFA) - return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; + return __raw_readw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0; return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) @@ -665,11 +665,11 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe08000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ return 1; } @@ -677,20 +677,20 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xff923000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff924000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff925000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7780) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffe00000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ @@ -698,17 +698,17 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffea0000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffeb0000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffec0000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffed0000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffee0000) - return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffef0000) - return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ @@ -718,22 +718,22 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffe8000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe8800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #if defined(CONFIG_CPU_SUBTYPE_SH7201) if (port->mapbase == 0xfffeA000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeA800) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffeB800) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ #endif return 1; } @@ -741,24 +741,24 @@ static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xf8400000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8410000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8420000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SHX3) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xffc30000) - return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc40000) - return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc50000) - return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffc60000) - return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return __raw_readw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } #endif diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 46de564aaea..465f2fae102 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -1179,16 +1179,18 @@ static void uart_firmware_cont(const struct firmware *fw, void *context) if (firmware->header.length != fw->size) { dev_err(dev, "invalid firmware\n"); - return; + goto out; } ret = qe_upload_firmware(firmware); if (ret) { dev_err(dev, "could not load firmware\n"); - return; + goto out; } firmware_loaded = 1; + out: + release_firmware(fw); } static int ucc_uart_probe(struct of_device *ofdev, @@ -1247,7 +1249,7 @@ static int ucc_uart_probe(struct of_device *ofdev, */ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, filename, &ofdev->dev, - &ofdev->dev, uart_firmware_cont); + GFP_KERNEL, &ofdev->dev, uart_firmware_cont); if (ret) { dev_err(&ofdev->dev, "could not load firmware %s\n", |