diff options
Diffstat (limited to 'drivers/serial')
30 files changed, 44 insertions, 40 deletions
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index ae0251ef6f4..78ed24bb6a3 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -35,6 +35,7 @@ #include <linux/pm.h> #include <linux/bitops.h> #include <linux/delay.h> +#include <linux/gfp.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index c3db16b7afa..2b1ea3d4c4f 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -38,6 +38,7 @@ #include <linux/serial_8250.h> #include <linux/nmi.h> #include <linux/mutex.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 33149d982e8..d8c0ffbfa6e 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/serial_core.h> #include <linux/signal.h> -#include <linux/slab.h> #include <linux/types.h> #include <asm/hardware.h> diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c index 0e1410f2c03..c13438c9301 100644 --- a/drivers/serial/8250_hp300.c +++ b/drivers/serial/8250_hp300.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/dio.h> #include <linux/console.h> +#include <linux/slab.h> #include <asm/io.h> #include "8250.h" diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 24485cc62ff..4822cb50cd0 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -348,6 +348,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E6", 0 }, /* Fujitsu Wacom 2FGT Tablet PC device */ { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index e4b3c2c88bb..b09a638d051 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -47,6 +47,7 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/io.h> diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index ce6c35333ff..743ebf5f16d 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -47,6 +47,7 @@ #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/sizes.h> diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index fcf273e3f48..96f7e7484fe 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/ioport.h> +#include <linux/gfp.h> #include <linux/io.h> #include <linux/init.h> #include <linux/console.h> diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 7c72888fbf9..c88f8ad3ff8 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -28,6 +28,7 @@ #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> +#include <linux/slab.h> #include <linux/platform_device.h> #include <linux/tty.h> #include <linux/tty_flip.h> diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 1b94c56ec23..3fc1d66e32c 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -29,6 +29,7 @@ #include <linux/module.h> #include <linux/tty.h> +#include <linux/gfp.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/serial.h> diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 722eac18f38..814ac006393 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include <linux/tty.h> #include <linux/ioport.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index e579d7a1807..4315b23590b 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -46,6 +46,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/rational.h> +#include <linux/slab.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 23ba6b40b3a..f164ba4eba0 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -20,6 +20,7 @@ #include <linux/pci.h> #include <linux/serial_core.h> #include <linux/ioc3.h> +#include <linux/slab.h> /* * Interesting things about the ioc3 diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 836d9ab4f72..8ad28fc6492 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -22,6 +22,7 @@ #include <linux/pci.h> #include <linux/ioc4.h> #include <linux/serial_core.h> +#include <linux/slab.h> /* * interesting things about the ioc4 diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 12cb5e446a4..eaf54501411 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -26,6 +26,7 @@ ***********************************************************************/ #include <linux/moduleparam.h> #include <linux/pci.h> +#include <linux/slab.h> #include "jsm.h" diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 5673ca9dfdc..7a4a914ecff 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -30,6 +30,7 @@ #include <linux/serial_reg.h> #include <linux/delay.h> /* For udelay */ #include <linux/pci.h> +#include <linux/slab.h> #include "jsm.h" diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c index 3c30c56aa2e..3351c3bd59e 100644 --- a/drivers/serial/max3100.c +++ b/drivers/serial/max3100.c @@ -41,6 +41,7 @@ #define MAX_MAX3100 4 #include <linux/delay.h> +#include <linux/slab.h> #include <linux/device.h> #include <linux/serial_core.h> #include <linux/serial.h> diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index 7bb5fee639e..b5aaef965f2 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -263,6 +263,7 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, } spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); @@ -379,6 +380,7 @@ static irqreturn_t mcf_interrupt(int irq, void *data) static void mcf_config_port(struct uart_port *port, int flags) { port->type = PORT_MCF; + port->fifosize = MCFUART_TXFIFOSIZE; /* Clear mask, so no surprise interrupts. */ writeb(0, port->membase + MCFUART_UIMR); @@ -424,7 +426,7 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /* * Define the basic serial functions we support. */ -static struct uart_ops mcf_uart_ops = { +static const struct uart_ops mcf_uart_ops = { .tx_empty = mcf_tx_empty, .get_mctrl = mcf_get_mctrl, .set_mctrl = mcf_set_mctrl, @@ -443,7 +445,7 @@ static struct uart_ops mcf_uart_ops = { .verify_port = mcf_verify_port, }; -static struct mcf_uart mcf_ports[3]; +static struct mcf_uart mcf_ports[4]; #define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 3119fddaedb..a176ab4bd65 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -29,39 +29,6 @@ * kind, whether express or implied. */ -/* Platform device Usage : - * - * Since PSCs can have multiple function, the correct driver for each one - * is selected by calling mpc52xx_match_psc_function(...). The function - * handled by this driver is "uart". - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - * - * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2, - * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and - * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly - * fpr the console code : without this 1:1 mapping, at early boot time, when we - * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it - * will be mapped to. - */ - -/* OF Platform device Usage : - * - * This driver is only used for PSCs configured in uart mode. The device - * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible - * list. - * - * By default, PSC devices are enumerated in the order they are found. However - * a particular PSC number can be forces by adding 'device_no = <port#>' - * to the device node. - * - * The driver init all necessary registers to place the PSC in uart mode without - * DCD. However, the pin multiplexing aren't changed and should be set either - * by the bootloader or in the platform init code. - */ - #undef DEBUG #include <linux/device.h> diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index b5496c28e60..55e113a0be0 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -70,6 +70,7 @@ #include <linux/dma-mapping.h> #include <linux/mv643xx.h> #include <linux/platform_device.h> +#include <linux/gfp.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 7571aaa138b..9711e06a837 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> -#include <linux/slab.h> #include <linux/delay.h> /* for udelay */ #include <linux/device.h> #include <asm/io.h> diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index cdf172eda2e..4abfebdb0fc 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -11,6 +11,7 @@ */ #include <linux/init.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/of_platform.h> diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index f020de1cdd5..700e10833bf 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -54,7 +54,6 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/console.h> -#include <linux/slab.h> #include <linux/adb.h> #include <linux/pmu.h> #include <linux/bitops.h> @@ -753,8 +752,10 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) uap->curregs[R5] = new_reg; /* NOTE: Not subject to 'transmitter active' rule. */ - if (ZS_IS_ASLEEP(uap)) + if (ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); return; + } write_zsreg(uap, R5, uap->curregs[R5]); } diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 56ee082157a..1102a39b44f 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -44,6 +44,7 @@ #include <linux/serial_core.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/slab.h> struct uart_pxa_port { struct uart_port port; diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 175d202ab37..8cfa5b12ea7 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -105,6 +105,10 @@ struct serial_cfg_mem { * manfid 0x0160, 0x0104 * This card appears to have a 14.7456MHz clock. */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) { port->uartclk = 14745600; @@ -196,6 +200,11 @@ static const struct serial_quirk quirks[] = { .multi = -1, .setup = quirk_setup_brainboxes_0104, }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { .manfid = MANFID_IBM, .prodid = ~0, .multi = -1, diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index 2e71bbc04da..b1962025b1a 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -650,6 +650,7 @@ static struct console ks8695_console = { static int __init ks8695_console_init(void) { + add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); register_console(&ks8695_console); return 0; } diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 309de6be820..8eb094c1f61 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -50,6 +50,7 @@ #include <linux/list.h> #include <linux/dmaengine.h> #include <linux/scatterlist.h> +#include <linux/slab.h> #ifdef CONFIG_SUPERH #include <asm/sh_bios.h> diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 170d3d68c8f..01f7731e59b 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -29,6 +29,7 @@ #include <linux/serial.h> #include <linux/sysrq.h> #include <linux/console.h> +#include <linux/slab.h> #ifdef CONFIG_SERIO #include <linux/serio.h> #endif @@ -1453,8 +1454,10 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { err = sunsu_kbd_ms_init(up); if (err) { + of_iounmap(&op->resource[0], + up->port.membase, up->reg_size); kfree(up); - goto out_unmap; + return err; } dev_set_drvdata(&op->dev, up); diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 7bf10264a6a..786ba85c170 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -26,6 +26,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/ioport.h> +#include <linux/slab.h> #include "timbuart.h" diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 465f2fae102..074904912f6 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/serial.h> +#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/io.h> #include <linux/of_platform.h> |