summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c4
-rw-r--r--drivers/serial/8250.h5
-rw-r--r--drivers/serial/8250_pci.c7
-rw-r--r--drivers/serial/atmel_serial.c2
-rw-r--r--drivers/serial/bfin_5xx.c80
-rw-r--r--drivers/serial/sb1250-duart.c2
-rw-r--r--drivers/serial/serial_core.c19
-rw-r--r--drivers/serial/sunhv.c1
-rw-r--r--drivers/serial/ucc_uart.c2
9 files changed, 55 insertions, 67 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1400ea6a249..1bc00b721e9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -43,7 +43,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include "8250.h"
@@ -93,6 +92,7 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
*/
#define CONFIG_HUB6 1
+#include <asm/serial.h>
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
@@ -1547,8 +1547,6 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
i->head = &up->list;
spin_unlock_irq(&i->lock);
- irq_flags |= SERIAL_EXTRA_IRQ_FLAGS;
-
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index a10a40cc0d9..91bd28f2bb4 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -78,8 +78,3 @@ struct serial8250_config {
#else
#define ALPHA_KLUDGE_MCR 0
#endif
-
-#ifndef SERIAL_EXTRA_IRQ_FLAGS
-#define SERIAL_EXTRA_IRQ_FLAGS 0
-#endif
-
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53fa19cf2f0..788c3559522 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2602,7 +2602,12 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
pbn_b2_2_115200 },
-
+ /*
+ * IntaShield IS-400
+ */
+ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
+ pbn_b2_4_115200 },
/*
* Perle PCI-RAS cards
*/
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index c065a704a93..42be8b01a40 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1318,7 +1318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
- quot = UART_GET_BRGR(port);
+ quot = UART_GET_BRGR(port) & ATMEL_US_CD;
if (!quot)
return;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead693b..fd9bb777df2 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -49,6 +49,7 @@
#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
#define DMA_RX_FLUSH_JIFFIES (HZ / 50)
+#define CTS_CHECK_JIFFIES (HZ / 50)
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
@@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
{
struct circ_buf *xmit = &uart->port.info->xmit;
- if (uart->port.x_char) {
- UART_PUT_CHAR(uart, uart->port.x_char);
- uart->port.icount.tx++;
- uart->port.x_char = 0;
- }
/*
* Check the modem control lines before
* transmitting anything.
@@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
return;
}
+ if (uart->port.x_char) {
+ UART_PUT_CHAR(uart, uart->port.x_char);
+ uart->port.icount.tx++;
+ uart->port.x_char = 0;
+ }
+
while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
}
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-static void bfin_serial_do_work(struct work_struct *work)
-{
- struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
-
- bfin_serial_mctrl_check(uart);
-}
-#endif
-
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
@@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
uart->tx_done = 0;
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ bfin_serial_mctrl_check(uart);
+
if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
uart->tx_count = 0;
uart->tx_done = 1;
@@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
uart->port.x_char = 0;
}
- /*
- * Check the modem control lines before
- * transmitting anything.
- */
- bfin_serial_mctrl_check(uart);
-
uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -530,11 +523,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
@@ -549,17 +538,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
@@ -577,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
if (!(status & TIOCM_CTS)) {
tty->hw_stopped = 1;
- schedule_work(&uart->cts_workqueue);
+ uart->cts_timer.data = (unsigned long)(uart);
+ uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
+ uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
+ add_timer(&(uart->cts_timer));
} else {
tty->hw_stopped = 0;
}
@@ -752,11 +736,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
@@ -771,11 +751,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -833,15 +809,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
@@ -866,6 +842,7 @@ static struct uart_ops bfin_serial_pops = {
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
@@ -904,7 +881,7 @@ static void __init bfin_serial_init_ports(void)
init_timer(&(bfin_serial_ports[i].rx_dma_timer));
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+ init_timer(&(bfin_serial_ports[i].cts_timer));
bfin_serial_ports[i].cts_pin =
bfin_serial_resource[i].uart_cts_pin;
bfin_serial_ports[i].rts_pin =
@@ -1206,7 +1183,6 @@ static int __init bfin_serial_init(void)
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 2d6c08b3dbc..f8e1447a022 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -924,7 +924,7 @@ console_initcall(sbd_serial_console_init);
static struct uart_driver sbd_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sb1250_duart",
.dev_name = "duart",
.major = TTY_MAJOR,
.minor = SB1250_DUART_MINOR_BASE,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index eab03273379..42d2e108b67 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@ out:
return ret;
}
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (port->ops->set_ldisc)
+ port->ops->set_ldisc(port);
+}
+
static void uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
@@ -1982,7 +1991,9 @@ struct uart_match {
static int serial_match_port(struct device *dev, void *data)
{
struct uart_match *match = data;
- dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line;
+ struct tty_driver *tty_drv = match->driver->tty_driver;
+ dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) +
+ match->port->line;
return dev->devt == devt; /* Actually, only one tty per port */
}
@@ -2054,6 +2065,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
{
struct uart_state *state = drv->state + port->line;
+ struct device *tty_dev;
+ struct uart_match match = {port, drv};
mutex_lock(&state->mutex);
@@ -2063,7 +2076,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
return 0;
}
- if (!port->suspended) {
+ tty_dev = device_find_child(port->dev, &match, serial_match_port);
+ if (!port->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(port->irq);
mutex_unlock(&state->mutex);
return 0;
@@ -2285,6 +2299,7 @@ static const struct tty_operations uart_ops = {
.unthrottle = uart_unthrottle,
.send_xchar = uart_send_xchar,
.set_termios = uart_set_termios,
+ .set_ldisc = uart_set_ldisc,
.stop = uart_stop,
.start = uart_start,
.hangup = uart_hangup,
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 145c0281495..2847336742d 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -499,7 +499,6 @@ static void sunhv_console_write_bychar(struct console *con, const char *s, unsig
} else
spin_lock(&port->lock);
- spin_lock_irqsave(&port->lock, flags);
for (i = 0; i < n; i++) {
if (*s == '\n')
sunhv_console_putchar(port, '\r');
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 01917c433f1..566a8b42e05 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -195,7 +195,7 @@ struct uart_qe_port {
static struct uart_driver ucc_uart_driver = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "ucc_uart",
.dev_name = "ttyQE",
.major = SERIAL_QE_MAJOR,
.minor = SERIAL_QE_MINOR,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-02 13:26:56 +0000