summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig28
-rw-r--r--drivers/serial/jsm/jsm_tty.c208
2 files changed, 79 insertions, 157 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0d38f0f2ae2..ee4265d7a8c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -892,20 +892,20 @@ config SERIAL_VR41XX_CONSOLE
a console on a serial port, say Y. Otherwise, say N.
config SERIAL_JSM
- tristate "Digi International NEO PCI Support"
- depends on PCI && BROKEN
- select SERIAL_CORE
- help
- This is a driver for Digi International's Neo series
- of cards which provide multiple serial ports. You would need
- something like this to connect more than two modems to your Linux
- box, for instance in order to become a dial-in server. This driver
- supports PCI boards only.
- If you have a card like this, say Y here and read the file
- <file:Documentation/jsm.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called jsm.
+ tristate "Digi International NEO PCI Support"
+ depends on PCI
+ select SERIAL_CORE
+ help
+ This is a driver for Digi International's Neo series
+ of cards which provide multiple serial ports. You would need
+ something like this to connect more than two modems to your Linux
+ box, for instance in order to become a dial-in server. This driver
+ supports PCI boards only.
+ If you have a card like this, say Y here and read the file
+ <file:Documentation/jsm.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jsm.
config SERIAL_SGI_IOC4
tristate "SGI IOC4 controller serial support"
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 6fa0d62d6f6..07bf28ca330 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -20,8 +20,10 @@
*
* Contact Information:
* Scott H Kilau <Scott_Kilau@digi.com>
- * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
- *
+ * Ananda Venkatarman <mansarov@us.ibm.com>
+ * Modifications:
+ * 01/19/06: changed jsm_input routine to use the dynamically allocated
+ * tty_buffer changes. Contributors: Scott Kilau and Ananda V.
***********************************************************************/
#include <linux/tty.h>
#include <linux/tty_flip.h>
@@ -497,16 +499,16 @@ void jsm_input(struct jsm_channel *ch)
{
struct jsm_board *bd;
struct tty_struct *tp;
+ struct tty_ldisc *ld;
u32 rmask;
u16 head;
u16 tail;
int data_len;
unsigned long lock_flags;
- int flip_len;
+ int flip_len = 0;
int len = 0;
int n = 0;
char *buf = NULL;
- char *buf2 = NULL;
int s = 0;
int i = 0;
@@ -574,56 +576,50 @@ void jsm_input(struct jsm_channel *ch)
/*
* If the rxbuf is empty and we are not throttled, put as much
- * as we can directly into the linux TTY flip buffer.
- * The jsm_rawreadok case takes advantage of carnal knowledge that
- * the char_buf and the flag_buf are next to each other and
- * are each of (2 * TTY_FLIPBUF_SIZE) size.
+ * as we can directly into the linux TTY buffer.
*
- * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf
- *actually still uses the flag buffer, so you can't
- *use it for input data
*/
- if (jsm_rawreadok) {
- if (tp->real_raw)
- flip_len = MYFLIPLEN;
- else
- flip_len = 2 * TTY_FLIPBUF_SIZE;
- } else
- flip_len = TTY_FLIPBUF_SIZE - tp->flip.count;
+ flip_len = TTY_FLIPBUF_SIZE;
len = min(data_len, flip_len);
len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt);
+ ld = tty_ldisc_ref(tp);
- if (len <= 0) {
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
- return;
- }
+ /*
+ * If the DONT_FLIP flag is on, don't flush our buffer, and act
+ * like the ld doesn't have any space to put the data right now.
+ */
+ if (test_bit(TTY_DONT_FLIP, &tp->flags))
+ len = 0;
/*
- * If we're bypassing flip buffers on rx, we can blast it
- * right into the beginning of the buffer.
+ * If we were unable to get a reference to the ld,
+ * don't flush our buffer, and act like the ld doesn't
+ * have any space to put the data right now.
*/
- if (jsm_rawreadok) {
- if (tp->real_raw) {
- if (ch->ch_flags & CH_FLIPBUF_IN_USE) {
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "JSM - FLIPBUF in use. delaying input\n");
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- return;
- }
- ch->ch_flags |= CH_FLIPBUF_IN_USE;
- buf = ch->ch_bd->flipbuf;
- buf2 = NULL;
- } else {
- buf = tp->flip.char_buf;
- buf2 = tp->flip.flag_buf;
- }
+ if (!ld) {
+ len = 0;
} else {
- buf = tp->flip.char_buf_ptr;
- buf2 = tp->flip.flag_buf_ptr;
+ /*
+ * If ld doesn't have a pointer to a receive_buf function,
+ * flush the data, then act like the ld doesn't have any
+ * space to put the data right now.
+ */
+ if (!ld->receive_buf) {
+ ch->ch_r_head = ch->ch_r_tail;
+ len = 0;
+ }
}
+ if (len <= 0) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+ if (ld)
+ tty_ldisc_deref(ld);
+ return;
+ }
+
+ len = tty_buffer_request_room(tp, len);
n = len;
/*
@@ -638,121 +634,47 @@ void jsm_input(struct jsm_channel *ch)
if (s <= 0)
break;
- memcpy(buf, ch->ch_rqueue + tail, s);
-
- /* buf2 is only set when port isn't raw */
- if (buf2)
- memcpy(buf2, ch->ch_equeue + tail, s);
-
- tail += s;
- buf += s;
- if (buf2)
- buf2 += s;
- n -= s;
- /* Flip queue if needed */
- tail &= rmask;
- }
+ /*
+ * If conditions are such that ld needs to see all
+ * UART errors, we will have to walk each character
+ * and error byte and send them to the buffer one at
+ * a time.
+ */
- /*
- * In high performance mode, we don't have to update
- * flag_buf or any of the counts or pointers into flip buf.
- */
- if (!jsm_rawreadok) {
if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
- for (i = 0; i < len; i++) {
+ for (i = 0; i < s; i++) {
/*
* Give the Linux ld the flags in the
* format it likes.
*/
- if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
- tp->flip.flag_buf_ptr[i] = TTY_BREAK;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
- tp->flip.flag_buf_ptr[i] = TTY_PARITY;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
- tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+ if (*(ch->ch_equeue +tail +i) & UART_LSR_BI)
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK);
+ else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE)
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY);
+ else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE)
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME);
else
- tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL);
}
} else {
- memset(tp->flip.flag_buf_ptr, 0, len);
+ tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ;
}
-
- tp->flip.char_buf_ptr += len;
- tp->flip.flag_buf_ptr += len;
- tp->flip.count += len;
- }
- else if (!tp->real_raw) {
- if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
- for (i = 0; i < len; i++) {
- /*
- * Give the Linux ld the flags in the
- * format it likes.
- */
- if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
- tp->flip.flag_buf_ptr[i] = TTY_BREAK;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
- tp->flip.flag_buf_ptr[i] = TTY_PARITY;
- else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
- tp->flip.flag_buf_ptr[i] = TTY_FRAME;
- else
- tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
- }
- } else
- memset(tp->flip.flag_buf, 0, len);
+ tail += s;
+ n -= s;
+ /* Flip queue if needed */
+ tail &= rmask;
}
- /*
- * If we're doing raw reads, jam it right into the
- * line disc bypassing the flip buffers.
- */
- if (jsm_rawreadok) {
- if (tp->real_raw) {
- ch->ch_r_tail = tail & rmask;
- ch->ch_e_tail = tail & rmask;
-
- jsm_check_queue_flow_control(ch);
-
- /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ /* Tell the tty layer its okay to "eat" the data now */
+ tty_flip_buffer_push(tp);
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "jsm_input. %d real_raw len:%d calling receive_buf for board %d\n",
- __LINE__, len, ch->ch_bd->boardnum);
- tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len);
-
- /* Allow use of channel flip buffer again */
- spin_lock_irqsave(&ch->ch_lock, lock_flags);
- ch->ch_flags &= ~CH_FLIPBUF_IN_USE;
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- } else {
- ch->ch_r_tail = tail & rmask;
- ch->ch_e_tail = tail & rmask;
-
- jsm_check_queue_flow_control(ch);
-
- /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n",
- __LINE__, len, ch->ch_bd->boardnum);
-
- tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len);
- }
- } else {
- ch->ch_r_tail = tail & rmask;
- ch->ch_e_tail = tail & rmask;
-
- jsm_check_queue_flow_control(ch);
-
- spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
-
- jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
- "jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__);
- tty_schedule_flip(tp);
- }
+ if (ld)
+ tty_ldisc_deref(ld);
jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
}