summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/pxa.c30
1 files changed, 10 insertions, 20 deletions
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f6e3b86bb0b..a48a8a13d87 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -43,13 +43,7 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/clk.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/regs-uart.h>
-
+#include <linux/io.h>
struct uart_pxa_port {
struct uart_port port;
@@ -491,7 +485,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
* Ensure the port will be enabled.
* This is required especially for serial console.
*/
- up->ier |= IER_UUE;
+ up->ier |= UART_IER_UUE;
/*
* Update the per-port timeout.
@@ -784,19 +778,15 @@ static int serial_pxa_probe(struct platform_device *dev)
sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
sport->port.uartclk = clk_get_rate(sport->clk);
- /*
- * Is it worth keeping this?
- */
- if (mmres->start == __PREG(FFUART))
- sport->name = "FFUART";
- else if (mmres->start == __PREG(BTUART))
- sport->name = "BTUART";
- else if (mmres->start == __PREG(STUART))
- sport->name = "STUART";
- else if (mmres->start == __PREG(HWUART))
- sport->name = "HWUART";
- else
+ switch (dev->id) {
+ case 0: sport->name = "FFUART"; break;
+ case 1: sport->name = "BTUART"; break;
+ case 2: sport->name = "STUART"; break;
+ case 3: sport->name = "HWUART"; break;
+ default:
sport->name = "???";
+ break;
+ }
sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
if (!sport->port.membase) {