summaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c2
-rw-r--r--drivers/serial/8250_pci.c5
-rw-r--r--drivers/serial/bfin_5xx.c31
-rw-r--r--drivers/serial/crisv10.c1
-rw-r--r--drivers/serial/kgdboc.c59
-rw-r--r--drivers/serial/mfd.c24
-rw-r--r--drivers/serial/serial_core.c1
7 files changed, 94 insertions, 29 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d8e14b7aa9..09a550860dc 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2872,7 +2872,7 @@ static struct console serial8250_console = {
.device = uart_console_device,
.setup = serial8250_console_setup,
.early_setup = serial8250_console_early_setup,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
.data = &serial8250_reg,
};
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53be4d35a0a..842e3b2a02b 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2285,6 +2285,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {
static const struct pci_device_id softmodem_blacklist[] = {
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+ { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+ { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
};
/*
@@ -2863,6 +2865,9 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
0, 0,
pbn_b0_4_1152000 },
+ { PCI_VENDOR_ID_OXSEMI, 0x9505,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
/*
* The below card is a little controversial since it is the
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a9eff2b18ea..19cac9f610f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -23,6 +23,7 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#include <linux/dma-mapping.h>
#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
@@ -33,12 +34,10 @@
#include <asm/gpio.h>
#include <mach/bfin_serial_5xx.h>
-#ifdef CONFIG_SERIAL_BFIN_DMA
-#include <linux/dma-mapping.h>
+#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
-#endif
#ifdef CONFIG_SERIAL_BFIN_MODULE
# undef CONFIG_EARLY_PRINTK
@@ -360,7 +359,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx++;
- SSYNC();
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -688,6 +686,13 @@ static int bfin_serial_startup(struct uart_port *port)
# ifdef CONFIG_BF54x
{
+ /*
+ * UART2 and UART3 on BF548 share interrupt PINs and DMA
+ * controllers with SPORT2 and SPORT3. UART rx and tx
+ * interrupts are generated in PIO mode only when configure
+ * their peripheral mapping registers properly, which means
+ * request corresponding DMA channels in PIO mode as well.
+ */
unsigned uart_dma_ch_rx, uart_dma_ch_tx;
switch (uart->port.irq) {
@@ -734,8 +739,7 @@ static int bfin_serial_startup(struct uart_port *port)
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
uart->cts_pin = -1;
- pr_info("Unable to attach BlackFin UART CTS interrupt.\
- So, disable it.\n");
+ pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
}
}
if (uart->rts_pin >= 0) {
@@ -747,8 +751,7 @@ static int bfin_serial_startup(struct uart_port *port)
if (request_irq(uart->status_irq,
bfin_serial_mctrl_cts_int,
IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
- pr_info("Unable to attach BlackFin UART Modem \
- Status interrupt.\n");
+ pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
}
/* CTS RTS PINs are negative assertive. */
@@ -846,6 +849,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_cflag & CMSPAR)
lcr |= STP;
+ spin_lock_irqsave(&uart->port.lock, flags);
+
port->read_status_mask = OE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (FE | PE);
@@ -875,8 +880,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_line != N_IRDA)
quot -= ANOMALY_05000230;
- spin_lock_irqsave(&uart->port.lock, flags);
-
UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
/* Disable UART */
@@ -1321,6 +1324,14 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
struct bfin_serial_port *uart;
struct ktermios t;
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+ /*
+ * If we are using early serial, don't let the normal console rewind
+ * log buffer, since that causes things to be printed multiple times
+ */
+ bfin_serial_console.flags &= ~CON_PRINTBUFFER;
+#endif
+
if (port == -1 || port >= nr_active_ports)
port = 0;
bfin_serial_init_ports();
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index fa62578fcd2..bcc31f2140a 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -18,7 +18,6 @@ static char *serial_version = "$Revision: 1.25 $";
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
-#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index d4b711c9a41..3374618300a 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -18,6 +18,7 @@
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/vt_kern.h>
+#include <linux/input.h>
#define MAX_CONFIG_LEN 40
@@ -37,6 +38,61 @@ static struct tty_driver *kgdb_tty_driver;
static int kgdb_tty_line;
#ifdef CONFIG_KDB_KEYBOARD
+static int kgdboc_reset_connect(struct input_handler *handler,
+ struct input_dev *dev,
+ const struct input_device_id *id)
+{
+ input_reset_device(dev);
+
+ /* Retrun an error - we do not want to bind, just to reset */
+ return -ENODEV;
+}
+
+static void kgdboc_reset_disconnect(struct input_handle *handle)
+{
+ /* We do not expect anyone to actually bind to us */
+ BUG();
+}
+
+static const struct input_device_id kgdboc_reset_ids[] = {
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ },
+ { }
+};
+
+static struct input_handler kgdboc_reset_handler = {
+ .connect = kgdboc_reset_connect,
+ .disconnect = kgdboc_reset_disconnect,
+ .name = "kgdboc_reset",
+ .id_table = kgdboc_reset_ids,
+};
+
+static DEFINE_MUTEX(kgdboc_reset_mutex);
+
+static void kgdboc_restore_input_helper(struct work_struct *dummy)
+{
+ /*
+ * We need to take a mutex to prevent several instances of
+ * this work running on different CPUs so they don't try
+ * to register again already registered handler.
+ */
+ mutex_lock(&kgdboc_reset_mutex);
+
+ if (input_register_handler(&kgdboc_reset_handler) == 0)
+ input_unregister_handler(&kgdboc_reset_handler);
+
+ mutex_unlock(&kgdboc_reset_mutex);
+}
+
+static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper);
+
+static void kgdboc_restore_input(void)
+{
+ schedule_work(&kgdboc_restore_input_work);
+}
+
static int kgdboc_register_kbd(char **cptr)
{
if (strncmp(*cptr, "kbd", 3) == 0) {
@@ -64,10 +120,12 @@ static void kgdboc_unregister_kbd(void)
i--;
}
}
+ flush_work_sync(&kgdboc_restore_input_work);
}
#else /* ! CONFIG_KDB_KEYBOARD */
#define kgdboc_register_kbd(x) 0
#define kgdboc_unregister_kbd()
+#define kgdboc_restore_input()
#endif /* ! CONFIG_KDB_KEYBOARD */
static int kgdboc_option_setup(char *opt)
@@ -231,6 +289,7 @@ static void kgdboc_post_exp_handler(void)
dbg_restore_graphics = 0;
con_debug_leave();
}
+ kgdboc_restore_input();
}
static struct kgdb_io kgdboc_io_ops = {
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 5fc699e929d..d40010a22ec 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -900,8 +900,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
- u32 mul = 0x3600;
- u32 ps = 0x10;
+ u32 ps, mul;
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -943,31 +942,24 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
quot = 1;
+ ps = 0x10;
+ mul = 0x3600;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
break;
- case 3000000:
- mul = 0x2EE0;
- break;
- case 2500000:
- mul = 0x2710;
- break;
- case 2000000:
- mul = 0x1F40;
- break;
case 1843200:
mul = 0x2400;
break;
+ case 3000000:
+ case 2500000:
+ case 2000000:
case 1500000:
- mul = 0x1770;
- break;
case 1000000:
- mul = 0xFA0;
- break;
case 500000:
- mul = 0x7D0;
+ /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+ mul = baud / 500000 * 0x9C4;
break;
default:
/* Use uart_get_divisor to get quot for other baud rates */
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index c4ea14670d4..9ffa5bee44a 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,7 +29,6 @@
#include <linux/console.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/serial.h> /* for serial_state and serial_icounter_struct */
#include <linux/serial_core.h>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 01:23:36 +0000