summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi.c')
-rw-r--r--drivers/spi/spi.c137
1 files changed, 134 insertions, 3 deletions
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 978dda2c523..9e039c60c06 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -553,6 +553,10 @@ static void spi_pump_messages(struct kthread_work *work)
master->unprepare_transfer_hardware(master))
dev_err(&master->dev,
"failed to unprepare transfer hardware\n");
+ if (master->auto_runtime_pm) {
+ pm_runtime_mark_last_busy(master->dev.parent);
+ pm_runtime_put_autosuspend(master->dev.parent);
+ }
return;
}
@@ -572,11 +576,23 @@ static void spi_pump_messages(struct kthread_work *work)
master->busy = true;
spin_unlock_irqrestore(&master->queue_lock, flags);
+ if (!was_busy && master->auto_runtime_pm) {
+ ret = pm_runtime_get_sync(master->dev.parent);
+ if (ret < 0) {
+ dev_err(&master->dev, "Failed to power device: %d\n",
+ ret);
+ return;
+ }
+ }
+
if (!was_busy && master->prepare_transfer_hardware) {
ret = master->prepare_transfer_hardware(master);
if (ret) {
dev_err(&master->dev,
"failed to prepare transfer hardware\n");
+
+ if (master->auto_runtime_pm)
+ pm_runtime_put(master->dev.parent);
return;
}
}
@@ -774,7 +790,7 @@ static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
msg->status = -EINPROGRESS;
list_add_tail(&msg->queue, &master->queue);
- if (master->running && !master->busy)
+ if (!master->busy)
queue_kthread_work(&master->kworker, &master->pump_messages);
spin_unlock_irqrestore(&master->queue_lock, flags);
@@ -869,6 +885,47 @@ static void of_register_spi_devices(struct spi_master *master)
if (of_find_property(nc, "spi-3wire", NULL))
spi->mode |= SPI_3WIRE;
+ /* Device DUAL/QUAD mode */
+ prop = of_get_property(nc, "spi-tx-bus-width", &len);
+ if (prop && len == sizeof(*prop)) {
+ switch (be32_to_cpup(prop)) {
+ case SPI_NBITS_SINGLE:
+ break;
+ case SPI_NBITS_DUAL:
+ spi->mode |= SPI_TX_DUAL;
+ break;
+ case SPI_NBITS_QUAD:
+ spi->mode |= SPI_TX_QUAD;
+ break;
+ default:
+ dev_err(&master->dev,
+ "spi-tx-bus-width %d not supported\n",
+ be32_to_cpup(prop));
+ spi_dev_put(spi);
+ continue;
+ }
+ }
+
+ prop = of_get_property(nc, "spi-rx-bus-width", &len);
+ if (prop && len == sizeof(*prop)) {
+ switch (be32_to_cpup(prop)) {
+ case SPI_NBITS_SINGLE:
+ break;
+ case SPI_NBITS_DUAL:
+ spi->mode |= SPI_RX_DUAL;
+ break;
+ case SPI_NBITS_QUAD:
+ spi->mode |= SPI_RX_QUAD;
+ break;
+ default:
+ dev_err(&master->dev,
+ "spi-rx-bus-width %d not supported\n",
+ be32_to_cpup(prop));
+ spi_dev_put(spi);
+ continue;
+ }
+ }
+
/* Device speed */
prop = of_get_property(nc, "spi-max-frequency", &len);
if (!prop || len < sizeof(*prop)) {
@@ -1169,7 +1226,7 @@ int spi_register_master(struct spi_master *master)
else {
status = spi_master_initialize_queue(master);
if (status) {
- device_unregister(&master->dev);
+ device_del(&master->dev);
goto done;
}
}
@@ -1316,6 +1373,19 @@ int spi_setup(struct spi_device *spi)
unsigned bad_bits;
int status = 0;
+ /* check mode to prevent that DUAL and QUAD set at the same time
+ */
+ if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
+ ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
+ dev_err(&spi->dev,
+ "setup: can not select dual and quad at the same time\n");
+ return -EINVAL;
+ }
+ /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
+ */
+ if ((spi->mode & SPI_3WIRE) && (spi->mode &
+ (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
+ return -EINVAL;
/* help drivers fail *cleanly* when they need options
* that aren't supported with their current master
*/
@@ -1351,6 +1421,11 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
struct spi_master *master = spi->master;
struct spi_transfer *xfer;
+ if (list_empty(&message->transfers))
+ return -EINVAL;
+ if (!message->complete)
+ return -EINVAL;
+
/* Half-duplex links include original MicroWire, and ones with
* only one data pin like SPI_3WIRE (switches direction) or where
* either MOSI or MISO is missing. They can also be caused by
@@ -1373,12 +1448,20 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
/**
* Set transfer bits_per_word and max speed as spi device default if
* it is not set for this transfer.
+ * Set transfer tx_nbits and rx_nbits as single transfer default
+ * (SPI_NBITS_SINGLE) if it is not set for this transfer.
*/
list_for_each_entry(xfer, &message->transfers, transfer_list) {
+ message->frame_length += xfer->len;
if (!xfer->bits_per_word)
xfer->bits_per_word = spi->bits_per_word;
- if (!xfer->speed_hz)
+ if (!xfer->speed_hz) {
xfer->speed_hz = spi->max_speed_hz;
+ if (master->max_speed_hz &&
+ xfer->speed_hz > master->max_speed_hz)
+ xfer->speed_hz = master->max_speed_hz;
+ }
+
if (master->bits_per_word_mask) {
/* Only 32 bits fit in the mask */
if (xfer->bits_per_word > 32)
@@ -1387,6 +1470,54 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
BIT(xfer->bits_per_word - 1)))
return -EINVAL;
}
+
+ if (xfer->speed_hz && master->min_speed_hz &&
+ xfer->speed_hz < master->min_speed_hz)
+ return -EINVAL;
+ if (xfer->speed_hz && master->max_speed_hz &&
+ xfer->speed_hz > master->max_speed_hz)
+ return -EINVAL;
+
+ if (xfer->tx_buf && !xfer->tx_nbits)
+ xfer->tx_nbits = SPI_NBITS_SINGLE;
+ if (xfer->rx_buf && !xfer->rx_nbits)
+ xfer->rx_nbits = SPI_NBITS_SINGLE;
+ /* check transfer tx/rx_nbits:
+ * 1. keep the value is not out of single, dual and quad
+ * 2. keep tx/rx_nbits is contained by mode in spi_device
+ * 3. if SPI_3WIRE, tx/rx_nbits should be in single
+ */
+ if (xfer->tx_buf) {
+ if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
+ xfer->tx_nbits != SPI_NBITS_DUAL &&
+ xfer->tx_nbits != SPI_NBITS_QUAD)
+ return -EINVAL;
+ if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
+ !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
+ return -EINVAL;
+ if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
+ !(spi->mode & SPI_TX_QUAD))
+ return -EINVAL;
+ if ((spi->mode & SPI_3WIRE) &&
+ (xfer->tx_nbits != SPI_NBITS_SINGLE))
+ return -EINVAL;
+ }
+ /* check transfer rx_nbits */
+ if (xfer->rx_buf) {
+ if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
+ xfer->rx_nbits != SPI_NBITS_DUAL &&
+ xfer->rx_nbits != SPI_NBITS_QUAD)
+ return -EINVAL;
+ if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
+ !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
+ return -EINVAL;
+ if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
+ !(spi->mode & SPI_RX_QUAD))
+ return -EINVAL;
+ if ((spi->mode & SPI_3WIRE) &&
+ (xfer->rx_nbits != SPI_NBITS_SINGLE))
+ return -EINVAL;
+ }
}
message->spi = spi;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 13:01:29 +0000