diff options
Diffstat (limited to 'drivers/ssb/driver_chipcommon.c')
| -rw-r--r-- | drivers/ssb/driver_chipcommon.c | 100 |
1 files changed, 91 insertions, 9 deletions
diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index e9d2ca11283..95c33a05f43 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -4,6 +4,7 @@ * * Copyright 2005, Broadcom Corporation * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de> * * Licensed under the GNU/GPL. See COPYING for details. */ @@ -12,6 +13,7 @@ #include <linux/ssb/ssb_regs.h> #include <linux/export.h> #include <linux/pci.h> +#include <linux/bcm47xx_wdt.h> #include "ssb_private.h" @@ -280,6 +282,69 @@ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) cc->fast_pwrup_delay = tmp; } +static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc) +{ + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) + return ssb_pmu_get_alp_clock(cc); + + return 20000000; +} + +static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc) +{ + u32 nb; + + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + if (cc->dev->id.revision < 26) + nb = 16; + else + nb = (cc->dev->id.revision >= 37) ? 32 : 24; + } else { + nb = 28; + } + if (nb == 32) + return 0xffffffff; + else + return (1 << nb) - 1; +} + +u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) +{ + struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); + + if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) + return 0; + + return ssb_chipco_watchdog_timer_set(cc, ticks); +} + +u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) +{ + struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt); + u32 ticks; + + if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB) + return 0; + + ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms); + return ticks / cc->ticks_per_ms; +} + +static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + /* based on 32KHz ILP clock */ + return 32; + } else { + if (cc->dev->id.revision < 18) + return ssb_clockspeed(bus) / 1000; + else + return ssb_chipco_alp_clock(cc) / 1000; + } +} + void ssb_chipcommon_init(struct ssb_chipcommon *cc) { if (!cc->dev) @@ -297,6 +362,11 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); calc_fast_powerup_delay(cc); + + if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) { + cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc); + cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms; + } } void ssb_chipco_suspend(struct ssb_chipcommon *cc) @@ -395,10 +465,27 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc, } /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ -void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) +u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) { - /* instant NMI */ - chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); + u32 maxt; + enum ssb_clkmode clkmode; + + maxt = ssb_chipco_watchdog_get_max_timer(cc); + if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { + if (ticks == 1) + ticks = 2; + else if (ticks > maxt) + ticks = maxt; + chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks); + } else { + clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC; + ssb_chipco_set_clockmode(cc, clkmode); + if (ticks > maxt) + ticks = maxt; + /* instant NMI */ + chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); + } + return ticks; } void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value) @@ -473,12 +560,7 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc, chipco_read32(cc, SSB_CHIPCO_CORECTL) | SSB_CHIPCO_CORECTL_UARTCLK0); } else if ((ccrev >= 11) && (ccrev != 15)) { - /* Fixed ALP clock */ - baud_base = 20000000; - if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { - /* FIXME: baud_base is different for devices with a PMU */ - SSB_WARN_ON(1); - } + baud_base = ssb_chipco_alp_clock(cc); div = 1; if (ccrev >= 21) { /* Turn off UART clock before switching clocksource. */ |