diff options
Diffstat (limited to 'drivers/ssb')
-rw-r--r-- | drivers/ssb/Kconfig | 6 | ||||
-rw-r--r-- | drivers/ssb/Makefile | 1 | ||||
-rw-r--r-- | drivers/ssb/main.c | 23 | ||||
-rw-r--r-- | drivers/ssb/pci.c | 113 | ||||
-rw-r--r-- | drivers/ssb/pcmcia.c | 518 | ||||
-rw-r--r-- | drivers/ssb/sprom.c | 133 | ||||
-rw-r--r-- | drivers/ssb/ssb_private.h | 17 |
7 files changed, 646 insertions, 165 deletions
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index f69ef0ba261..0f7cce2560d 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -20,6 +20,10 @@ config SSB If unsure, say N. +# Common SPROM support routines +config SSB_SPROM + bool + config SSB_PCIHOST_POSSIBLE bool depends on SSB && (PCI = y || PCI = SSB) @@ -28,6 +32,7 @@ config SSB_PCIHOST_POSSIBLE config SSB_PCIHOST bool "Support for SSB on PCI-bus host" depends on SSB_PCIHOST_POSSIBLE + select SSB_SPROM default y help Support for a Sonics Silicon Backplane on top @@ -48,6 +53,7 @@ config SSB_PCMCIAHOST_POSSIBLE config SSB_PCMCIAHOST bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)" depends on SSB_PCMCIAHOST_POSSIBLE + select SSB_SPROM help Support for a Sonics Silicon Backplane on top of a PCMCIA device. diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index 910f35e32fc..6f255e9c5af 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -1,6 +1,7 @@ # core ssb-y += main.o scan.o ssb-$(CONFIG_SSB_EMBEDDED) += embedded.o +ssb-$(CONFIG_SSB_SPROM) += sprom.o # host support ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 49d7bbb9bea..e1237191644 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -69,6 +69,25 @@ found: } #endif /* CONFIG_SSB_PCIHOST */ +#ifdef CONFIG_SSB_PCMCIAHOST +struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev) +{ + struct ssb_bus *bus; + + ssb_buses_lock(); + list_for_each_entry(bus, &buses, list) { + if (bus->bustype == SSB_BUSTYPE_PCMCIA && + bus->host_pcmcia == pdev) + goto found; + } + bus = NULL; +found: + ssb_buses_unlock(); + + return bus; +} +#endif /* CONFIG_SSB_PCMCIAHOST */ + int ssb_for_each_bus_call(unsigned long data, int (*func)(struct ssb_bus *bus, unsigned long data)) { @@ -398,7 +417,7 @@ void ssb_bus_unregister(struct ssb_bus *bus) list_del(&bus->list); ssb_buses_unlock(); - /* ssb_pcmcia_exit(bus); */ + ssb_pcmcia_exit(bus); ssb_pci_exit(bus); ssb_iounmap(bus); } @@ -663,7 +682,7 @@ out: err_dequeue: list_del(&bus->list); err_pcmcia_exit: -/* ssb_pcmcia_exit(bus); */ + ssb_pcmcia_exit(bus); err_pci_exit: ssb_pci_exit(bus); err_unmap: diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 1facc7620fc..f1514b33cfa 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -227,7 +227,7 @@ static u8 ssb_sprom_crc(const u16 *sprom, u16 size) return crc; } -static int sprom_check_crc(const u16 *sprom, u16 size) +static int sprom_check_crc(const u16 *sprom, size_t size) { u8 crc; u8 expected_crc; @@ -242,12 +242,14 @@ static int sprom_check_crc(const u16 *sprom, u16 size) return 0; } -static void sprom_do_read(struct ssb_bus *bus, u16 *sprom) +static int sprom_do_read(struct ssb_bus *bus, u16 *sprom) { int i; for (i = 0; i < bus->sprom_size; i++) sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); + + return 0; } static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom) @@ -660,71 +662,18 @@ const struct ssb_bus_ops ssb_pci_ops = { .write32 = ssb_pci_write32, }; -static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, u16 size) -{ - int i, pos = 0; - - for (i = 0; i < size; i++) - pos += snprintf(buf + pos, buf_len - pos - 1, - "%04X", swab16(sprom[i]) & 0xFFFF); - pos += snprintf(buf + pos, buf_len - pos - 1, "\n"); - - return pos + 1; -} - -static int hex2sprom(u16 *sprom, const char *dump, size_t len, u16 size) -{ - char tmp[5] = { 0 }; - int cnt = 0; - unsigned long parsed; - - if (len < size * 2) - return -EINVAL; - - while (cnt < size) { - memcpy(tmp, dump, 4); - dump += 4; - parsed = simple_strtoul(tmp, NULL, 16); - sprom[cnt++] = swab16((u16)parsed); - } - - return 0; -} - static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev, struct device_attribute *attr, char *buf) { struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev); struct ssb_bus *bus; - u16 *sprom; - int err = -ENODEV; - ssize_t count = 0; bus = ssb_pci_dev_to_bus(pdev); if (!bus) - goto out; - err = -ENOMEM; - sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); - if (!sprom) - goto out; + return -ENODEV; - /* Use interruptible locking, as the SPROM write might - * be holding the lock for several seconds. So allow userspace - * to cancel operation. */ - err = -ERESTARTSYS; - if (mutex_lock_interruptible(&bus->pci_sprom_mutex)) - goto out_kfree; - sprom_do_read(bus, sprom); - mutex_unlock(&bus->pci_sprom_mutex); - - count = sprom2hex(sprom, buf, PAGE_SIZE, bus->sprom_size); - err = 0; - -out_kfree: - kfree(sprom); -out: - return err ? err : count; + return ssb_attr_sprom_show(bus, buf, sprom_do_read); } static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev, @@ -733,55 +682,13 @@ static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev, { struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev); struct ssb_bus *bus; - u16 *sprom; - int res = 0, err = -ENODEV; bus = ssb_pci_dev_to_bus(pdev); if (!bus) - goto out; - err = -ENOMEM; - sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); - if (!sprom) - goto out; - err = hex2sprom(sprom, buf, count, bus->sprom_size); - if (err) { - err = -EINVAL; - goto out_kfree; - } - err = sprom_check_crc(sprom, bus->sprom_size); - if (err) { - err = -EINVAL; - goto out_kfree; - } + return -ENODEV; - /* Use interruptible locking, as the SPROM write might - * be holding the lock for several seconds. So allow userspace - * to cancel operation. */ - err = -ERESTARTSYS; - if (mutex_lock_interruptible(&bus->pci_sprom_mutex)) - goto out_kfree; - err = ssb_devices_freeze(bus); - if (err == -EOPNOTSUPP) { - ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " - "No suspend support. Is CONFIG_PM enabled?\n"); - goto out_unlock; - } - if (err) { - ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); - goto out_unlock; - } - res = sprom_do_write(bus, sprom); - err = ssb_devices_thaw(bus); - if (err) - ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); -out_unlock: - mutex_unlock(&bus->pci_sprom_mutex); -out_kfree: - kfree(sprom); -out: - if (res) - return res; - return err ? err : count; + return ssb_attr_sprom_store(bus, buf, count, + sprom_check_crc, sprom_do_write); } static DEVICE_ATTR(ssb_sprom, 0600, @@ -808,7 +715,7 @@ int ssb_pci_init(struct ssb_bus *bus) return 0; pdev = bus->host_pci; - mutex_init(&bus->pci_sprom_mutex); + mutex_init(&bus->sprom_mutex); err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom); if (err) goto out; diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index 84b3a845a8a..cd49f7c6553 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -3,7 +3,7 @@ * PCMCIA-Hostbus related functions * * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> - * Copyright 2007 Michael Buesch <mb@bu3sch.de> + * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de> * * Licensed under the GNU/GPL. See COPYING for details. */ @@ -11,6 +11,7 @@ #include <linux/ssb/ssb.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/etherdevice.h> #include <pcmcia/cs_types.h> #include <pcmcia/cs.h> @@ -26,59 +27,132 @@ #define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG 0 +/* PCMCIA configuration registers */ +#define SSB_PCMCIA_CORECTL 0x00 +#define SSB_PCMCIA_CORECTL_RESET 0x80 /* Core reset */ +#define SSB_PCMCIA_CORECTL_IRQEN 0x04 /* IRQ enable */ +#define SSB_PCMCIA_CORECTL_FUNCEN 0x01 /* Function enable */ +#define SSB_PCMCIA_CORECTL2 0x80 +#define SSB_PCMCIA_ADDRESS0 0x2E +#define SSB_PCMCIA_ADDRESS1 0x30 +#define SSB_PCMCIA_ADDRESS2 0x32 +#define SSB_PCMCIA_MEMSEG 0x34 +#define SSB_PCMCIA_SPROMCTL 0x36 +#define SSB_PCMCIA_SPROMCTL_IDLE 0 +#define SSB_PCMCIA_SPROMCTL_WRITE 1 +#define SSB_PCMCIA_SPROMCTL_READ 2 +#define SSB_PCMCIA_SPROMCTL_WRITEEN 4 +#define SSB_PCMCIA_SPROMCTL_WRITEDIS 7 +#define SSB_PCMCIA_SPROMCTL_DONE 8 +#define SSB_PCMCIA_SPROM_DATALO 0x38 +#define SSB_PCMCIA_SPROM_DATAHI 0x3A +#define SSB_PCMCIA_SPROM_ADDRLO 0x3C +#define SSB_PCMCIA_SPROM_ADDRHI 0x3E + +/* Hardware invariants CIS tuples */ +#define SSB_PCMCIA_CIS 0x80 +#define SSB_PCMCIA_CIS_ID 0x01 +#define SSB_PCMCIA_CIS_BOARDREV 0x02 +#define SSB_PCMCIA_CIS_PA 0x03 +#define SSB_PCMCIA_CIS_PA_PA0B0_LO 0 +#define SSB_PCMCIA_CIS_PA_PA0B0_HI 1 +#define SSB_PCMCIA_CIS_PA_PA0B1_LO 2 +#define SSB_PCMCIA_CIS_PA_PA0B1_HI 3 +#define SSB_PCMCIA_CIS_PA_PA0B2_LO 4 +#define SSB_PCMCIA_CIS_PA_PA0B2_HI 5 +#define SSB_PCMCIA_CIS_PA_ITSSI 6 +#define SSB_PCMCIA_CIS_PA_MAXPOW 7 +#define SSB_PCMCIA_CIS_OEMNAME 0x04 +#define SSB_PCMCIA_CIS_CCODE 0x05 +#define SSB_PCMCIA_CIS_ANTENNA 0x06 +#define SSB_PCMCIA_CIS_ANTGAIN 0x07 +#define SSB_PCMCIA_CIS_BFLAGS 0x08 +#define SSB_PCMCIA_CIS_LEDS 0x09 + +/* PCMCIA SPROM size. */ +#define SSB_PCMCIA_SPROM_SIZE 256 +#define SSB_PCMCIA_SPROM_SIZE_BYTES (SSB_PCMCIA_SPROM_SIZE * sizeof(u16)) + + +/* Write to a PCMCIA configuration register. */ +static int ssb_pcmcia_cfg_write(struct ssb_bus *bus, u8 offset, u8 value) +{ + conf_reg_t reg; + int res; + + memset(®, 0, sizeof(reg)); + reg.Offset = offset; + reg.Action = CS_WRITE; + reg.Value = value; + res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); + if (unlikely(res != CS_SUCCESS)) + return -EBUSY; + + return 0; +} + +/* Read from a PCMCIA configuration register. */ +static int ssb_pcmcia_cfg_read(struct ssb_bus *bus, u8 offset, u8 *value) +{ + conf_reg_t reg; + int res; + + memset(®, 0, sizeof(reg)); + reg.Offset = offset; + reg.Action = CS_READ; + res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); + if (unlikely(res != CS_SUCCESS)) + return -EBUSY; + *value = reg.Value; + + return 0; +} + int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, u8 coreidx) { - struct pcmcia_device *pdev = bus->host_pcmcia; int err; int attempts = 0; u32 cur_core; - conf_reg_t reg; u32 addr; u32 read_addr; + u8 val; addr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; while (1) { - reg.Action = CS_WRITE; - reg.Offset = 0x2E; - reg.Value = (addr & 0x0000F000) >> 12; - err = pcmcia_access_configuration_register(pdev, ®); - if (err != CS_SUCCESS) + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_ADDRESS0, + (addr & 0x0000F000) >> 12); + if (err) goto error; - reg.Offset = 0x30; - reg.Value = (addr & 0x00FF0000) >> 16; - err = pcmcia_access_configuration_register(pdev, ®); - if (err != CS_SUCCESS) + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_ADDRESS1, + (addr & 0x00FF0000) >> 16); + if (err) goto error; - reg.Offset = 0x32; - reg.Value = (addr & 0xFF000000) >> 24; - err = pcmcia_access_configuration_register(pdev, ®); - if (err != CS_SUCCESS) + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_ADDRESS2, + (addr & 0xFF000000) >> 24); + if (err) goto error; read_addr = 0; - reg.Action = CS_READ; - reg.Offset = 0x2E; - err = pcmcia_access_configuration_register(pdev, ®); - if (err != CS_SUCCESS) + err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_ADDRESS0, &val); + if (err) goto error; - read_addr |= ((u32)(reg.Value & 0x0F)) << 12; - reg.Offset = 0x30; - err = pcmcia_access_configuration_register(pdev, ®); - if (err != CS_SUCCESS) + read_addr |= ((u32)(val & 0x0F)) << 12; + err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_ADDRESS1, &val); + if (err) goto error; - read_addr |= ((u32)reg.Value) << 16; - reg.Offset = 0x32; - err = pcmcia_access_configuration_register(pdev, ®); - if (err != CS_SUCCESS) + read_addr |= ((u32)val) << 16; + err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_ADDRESS2, &val); + if (err) goto error; - read_addr |= ((u32)reg.Value) << 24; + read_addr |= ((u32)val) << 24; cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE; if (cur_core == coreidx) break; + err = -ETIMEDOUT; if (attempts++ > SSB_BAR0_MAX_RETRIES) goto error; udelay(10); @@ -87,7 +161,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, return 0; error: ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); - return -ENODEV; + return err; } int ssb_pcmcia_switch_core(struct ssb_bus *bus, @@ -112,27 +186,21 @@ int ssb_pcmcia_switch_core(struct ssb_bus *bus, int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg) { int attempts = 0; - conf_reg_t reg; - int res; + int err; + u8 val; SSB_WARN_ON((seg != 0) && (seg != 1)); - reg.Offset = 0x34; - reg.Function = 0; while (1) { - reg.Action = CS_WRITE; - reg.Value = seg; - res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); - if (unlikely(res != CS_SUCCESS)) + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_MEMSEG, seg); + if (err) goto error; - reg.Value = 0xFF; - reg.Action = CS_READ; - res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); - if (unlikely(res != CS_SUCCESS)) + err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_MEMSEG, &val); + if (err) goto error; - - if (reg.Value == seg) + if (val == seg) break; + err = -ETIMEDOUT; if (unlikely(attempts++ > SSB_BAR0_MAX_RETRIES)) goto error; udelay(10); @@ -142,7 +210,7 @@ int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg) return 0; error: ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n"); - return -ENODEV; + return err; } static int select_core_and_segment(struct ssb_device *dev, @@ -276,18 +344,344 @@ const struct ssb_bus_ops ssb_pcmcia_ops = { .write32 = ssb_pcmcia_write32, }; -#include <linux/etherdevice.h> +static int ssb_pcmcia_sprom_command(struct ssb_bus *bus, u8 command) +{ + unsigned int i; + int err; + u8 value; + + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROMCTL, command); + if (err) + return err; + for (i = 0; i < 1000; i++) { + err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_SPROMCTL, &value); + if (err) + return err; + if (value & SSB_PCMCIA_SPROMCTL_DONE) + return 0; + udelay(10); + } + + return -ETIMEDOUT; +} + +/* offset is the 16bit word offset */ +static int ssb_pcmcia_sprom_read(struct ssb_bus *bus, u16 offset, u16 *value) +{ + int err; + u8 lo, hi; + + offset *= 2; /* Make byte offset */ + + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRLO, + (offset & 0x00FF)); + if (err) + return err; + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRHI, + (offset & 0xFF00) >> 8); + if (err) + return err; + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_READ); + if (err) + return err; + err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_SPROM_DATALO, &lo); + if (err) + return err; + err = ssb_pcmcia_cfg_read(bus, SSB_PCMCIA_SPROM_DATAHI, &hi); + if (err) + return err; + *value = (lo | (((u16)hi) << 8)); + + return 0; +} + +/* offset is the 16bit word offset */ +static int ssb_pcmcia_sprom_write(struct ssb_bus *bus, u16 offset, u16 value) +{ + int err; + + offset *= 2; /* Make byte offset */ + + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRLO, + (offset & 0x00FF)); + if (err) + return err; + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_ADDRHI, + (offset & 0xFF00) >> 8); + if (err) + return err; + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_DATALO, + (value & 0x00FF)); + if (err) + return err; + err = ssb_pcmcia_cfg_write(bus, SSB_PCMCIA_SPROM_DATAHI, + (value & 0xFF00) >> 8); + if (err) + return err; + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITE); + if (err) + return err; + msleep(20); + + return 0; +} + +/* Read the SPROM image. bufsize is in 16bit words. */ +static int ssb_pcmcia_sprom_read_all(struct ssb_bus *bus, u16 *sprom) +{ + int err, i; + + for (i = 0; i < SSB_PCMCIA_SPROM_SIZE; i++) { + err = ssb_pcmcia_sprom_read(bus, i, &sprom[i]); + if (err) + return err; + } + + return 0; +} + +/* Write the SPROM image. size is in 16bit words. */ +static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom) +{ + int i, err; + bool failed = 0; + size_t size = SSB_PCMCIA_SPROM_SIZE; + + ssb_printk(KERN_NOTICE PFX + "Writing SPROM. Do NOT turn off the power! " + "Please stand by...\n"); + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN); + if (err) { + ssb_printk(KERN_NOTICE PFX + "Could not enable SPROM write access.\n"); + return -EBUSY; + } + ssb_printk(KERN_NOTICE PFX "[ 0%%"); + msleep(500); + for (i = 0; i < size; i++) { + if (i == size / 4) + ssb_printk("25%%"); + else if (i == size / 2) + ssb_printk("50%%"); + else if (i == (size * 3) / 4) + ssb_printk("75%%"); + else if (i % 2) + ssb_printk("."); + err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); + if (err) { + ssb_printk("\n" KERN_NOTICE PFX + "Failed to write to SPROM.\n"); + failed = 1; + break; + } + } + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); + if (err) { + ssb_printk("\n" KERN_NOTICE PFX + "Could not disable SPROM write access.\n"); + failed = 1; + } + msleep(500); + if (!failed) { + ssb_printk("100%% ]\n"); + ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); + } + + return failed ? -EBUSY : 0; +} + +static int ssb_pcmcia_sprom_check_crc(const u16 *sprom, size_t size) +{ + //TODO + return 0; +} + +#define GOTO_ERROR_ON(condition, description) do { \ + if (unlikely(condition)) { \ + error_description = description; \ + goto error; \ + } \ + } while (0) + int ssb_pcmcia_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) { - //TODO - random_ether_addr(iv->sprom.il0mac); + tuple_t tuple; + int res; + unsigned char buf[32]; + struct ssb_sprom *sprom = &iv->sprom; + struct ssb_boardinfo *bi = &iv->boardinfo; + const char *error_description; + + memset(sprom, 0xFF, sizeof(*sprom)); + sprom->revision = 1; + sprom->boardflags_lo = 0; + sprom->boardflags_hi = 0; + + /* First fetch the MAC address. */ + memset(&tuple, 0, sizeof(tuple)); + tuple.DesiredTuple = CISTPL_FUNCE; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); + GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); + GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl data"); + while (1) { + GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1"); + if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID) + break; + res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); + GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); + GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl data"); + } + GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size"); + memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN); + + /* Fetch the vendor specific tuples. */ + memset(&tuple, 0, sizeof(tuple)); + tuple.DesiredTuple = SSB_PCMCIA_CIS; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); + GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); + GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl data"); + while (1) { + GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1"); + switch (tuple.TupleData[0]) { + case SSB_PCMCIA_CIS_ID: + GOTO_ERROR_ON((tuple.TupleDataLen != 5) && + (tuple.TupleDataLen != 7), + "id tpl size"); + bi->vendor = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); + break; + case SSB_PCMCIA_CIS_BOARDREV: + GOTO_ERROR_ON(tuple.TupleDataLen != 2, + "boardrev tpl size"); + sprom->board_rev = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_PA: + GOTO_ERROR_ON(tuple.TupleDataLen != 9, + "pa tpl size"); + sprom->pa0b0 = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); + sprom->pa0b1 = tuple.TupleData[3] | + ((u16)tuple.TupleData[4] << 8); + sprom->pa0b2 = tuple.TupleData[5] | + ((u16)tuple.TupleData[6] << 8); + sprom->itssi_a = tuple.TupleData[7]; + sprom->itssi_bg = tuple.TupleData[7]; + sprom->maxpwr_a = tuple.TupleData[8]; + sprom->maxpwr_bg = tuple.TupleData[8]; + break; + case SSB_PCMCIA_CIS_OEMNAME: + /* We ignore this. */ + break; + case SSB_PCMCIA_CIS_CCODE: + GOTO_ERROR_ON(tuple.TupleDataLen != 2, + "ccode tpl size"); + sprom->country_code = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_ANTENNA: + GOTO_ERROR_ON(tuple.TupleDataLen != 2, + "ant tpl size"); + sprom->ant_available_a = tuple.TupleData[1]; + sprom->ant_available_bg = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple.TupleDataLen != 2, + "antg tpl size"); + sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1]; + sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1]; + sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1]; + sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1]; + sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1]; + sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1]; + sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1]; + sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON(tuple.TupleDataLen != 3, + "bfl tpl size"); + sprom->boardflags_lo = tuple.TupleData[1] | + ((u16)tuple.TupleData[2] << 8); + break; + case SSB_PCMCIA_CIS_LEDS: + GOTO_ERROR_ON(tuple.TupleDataLen != 5, + "leds tpl size"); + sprom->gpio0 = tuple.TupleData[1]; + sprom->gpio1 = tuple.TupleData[2]; + sprom->gpio2 = tuple.TupleData[3]; + sprom->gpio3 = tuple.TupleData[4]; + break; + } + res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); + if (res == CS_NO_MORE_ITEMS) + break; + GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl"); + res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); + GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl data"); + } + return 0; +error: + ssb_printk(KERN_ERR PFX + "PCMCIA: Failed to fetch device invariants: %s\n", + error_description); + return -ENODEV; +} + +static ssize_t ssb_pcmcia_attr_sprom_show(struct device *pcmciadev, + struct device_attribute *attr, + char *buf) +{ + struct pcmcia_device *pdev = + container_of(pcmciadev, struct pcmcia_device, dev); + struct ssb_bus *bus; + + bus = ssb_pcmcia_dev_to_bus(pdev); + if (!bus) + return -ENODEV; + + return ssb_attr_sprom_show(bus, buf, + ssb_pcmcia_sprom_read_all); +} + +static ssize_t ssb_pcmcia_attr_sprom_store(struct device *pcmciadev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct pcmcia_device *pdev = + container_of(pcmciadev, struct pcmcia_device, dev); + struct ssb_bus *bus; + + bus = ssb_pcmcia_dev_to_bus(pdev); + if (!bus) + return -ENODEV; + + return ssb_attr_sprom_store(bus, buf, count, + ssb_pcmcia_sprom_check_crc, + ssb_pcmcia_sprom_write_all); +} + +static DEVICE_ATTR(ssb_sprom, 0600, + ssb_pcmcia_attr_sprom_show, + ssb_pcmcia_attr_sprom_store); + +void ssb_pcmcia_exit(struct ssb_bus *bus) +{ + if (bus->bustype != SSB_BUSTYPE_PCMCIA) + return; + + device_remove_file(&bus->host_pcmcia->dev, &dev_attr_ssb_sprom); } int ssb_pcmcia_init(struct ssb_bus *bus) { - conf_reg_t reg; + u8 val, offset; int err; if (bus->bustype != SSB_BUSTYPE_PCMCIA) @@ -298,22 +692,26 @@ int ssb_pcmcia_init(struct ssb_bus *bus) ssb_pcmcia_switch_segment(bus, 0); /* Init IRQ routing */ - reg.Action = CS_READ; - reg.Function = 0; if (bus->chip_id == 0x4306) - reg.Offset = 0x00; + offset = SSB_PCMCIA_CORECTL; else - reg.Offset = 0x80; - err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); - if (err != CS_SUCCESS) + offset = SSB_PCMCIA_CORECTL2; + err = ssb_pcmcia_cfg_read(bus, offset, &val); + if (err) goto error; - reg.Action = CS_WRITE; - reg.Value |= 0x04 | 0x01; - err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); - if (err != CS_SUCCESS) + val |= SSB_PCMCIA_CORECTL_IRQEN | SSB_PCMCIA_CORECTL_FUNCEN; + err = ssb_pcmcia_cfg_write(bus, offset, val); + if (err) + goto error; + + bus->sprom_size = SSB_PCMCIA_SPROM_SIZE; + mutex_init(&bus->sprom_mutex); + err = device_create_file(&bus->host_pcmcia->dev, &dev_attr_ssb_sprom); + if (err) goto error; return 0; error: - return -ENODEV; + ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n"); + return err; } diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c new file mode 100644 index 00000000000..3668edb3931 --- /dev/null +++ b/drivers/ssb/sprom.c @@ -0,0 +1,133 @@ +/* + * Sonics Silicon Backplane + * Common SPROM support routines + * + * Copyright (C) 2005-2008 Michael Buesch <mb@bu3sch.de> + * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de> + * Copyright (C) 2005 Stefano Brivio <st3@riseup.net> + * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org> + * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "ssb_private.h" + + +static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, + size_t sprom_size_words) +{ + int i, pos = 0; + + for (i = 0; i < sprom_size_words; i++) + pos += snprintf(buf + pos, buf_len - pos - 1, + "%04X", swab16(sprom[i]) & 0xFFFF); + pos += snprintf(buf + pos, buf_len - pos - 1, "\n"); + + return pos + 1; +} + +static int hex2sprom(u16 *sprom, const char *dump, size_t len, + size_t sprom_size_words) +{ + char tmp[5] = { 0 }; + int cnt = 0; + unsigned long parsed; + + if (len < sprom_size_words * 2) + return -EINVAL; + + while (cnt < sprom_size_words) { + memcpy(tmp, dump, 4); + dump += 4; + parsed = simple_strtoul(tmp, NULL, 16); + sprom[cnt++] = swab16((u16)parsed); + } + + return 0; +} + +/* Common sprom device-attribute show-handler */ +ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf, + int (*sprom_read)(struct ssb_bus *bus, u16 *sprom)) +{ + u16 *sprom; + int err = -ENOMEM; + ssize_t count = 0; + size_t sprom_size_words = bus->sprom_size; + + sprom = kcalloc(sprom_size_words, sizeof(u16), GFP_KERNEL); + if (!sprom) + goto out; + + /* Use interruptible locking, as the SPROM write might + * be holding the lock for several seconds. So allow userspace + * to cancel operation. */ + err = -ERESTARTSYS; + if (mutex_lock_interruptible(&bus->sprom_mutex)) + goto out_kfree; + err = sprom_read(bus, sprom); + mutex_unlock(&bus->sprom_mutex); + + if (!err) + count = sprom2hex(sprom, buf, PAGE_SIZE, sprom_size_words); + +out_kfree: + kfree(sprom); +out: + return err ? err : count; +} + +/* Common sprom device-attribute store-handler */ +ssize_t ssb_attr_sprom_store(struct ssb_bus *bus, + const char *buf, size_t count, + int (*sprom_check_crc)(const u16 *sprom, size_t size), + int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)) +{ + u16 *sprom; + int res = 0, err = -ENOMEM; + size_t sprom_size_words = bus->sprom_size; + + sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); + if (!sprom) + goto out; + err = hex2sprom(sprom, buf, count, sprom_size_words); + if (err) { + err = -EINVAL; + goto out_kfree; + } + err = sprom_check_crc(sprom, sprom_size_words); + if (err) { + err = -EINVAL; + goto out_kfree; + } + + /* Use interruptible locking, as the SPROM write might + * be holding the lock for several seconds. So allow userspace + * to cancel operation. */ + err = -ERESTARTSYS; + if (mutex_lock_interruptible(&bus->sprom_mutex)) + goto out_kfree; + err = ssb_devices_freeze(bus); + if (err == -EOPNOTSUPP) { + ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " + "No suspend support. Is CONFIG_PM enabled?\n"); + goto out_unlock; + } + if (err) { + ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); + goto out_unlock; + } + res = sprom_write(bus, sprom); + err = ssb_devices_thaw(bus); + if (err) + ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); +out_unlock: + mutex_unlock(&bus->sprom_mutex); +out_kfree: + kfree(sprom); +out: + if (res) + return res; + return err ? err : count; +} diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index d03b20983b1..a83bf7a4d80 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -81,6 +81,7 @@ extern int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg); extern int ssb_pcmcia_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv); +extern void ssb_pcmcia_exit(struct ssb_bus *bus); extern int ssb_pcmcia_init(struct ssb_bus *bus); extern const struct ssb_bus_ops ssb_pcmcia_ops; #else /* CONFIG_SSB_PCMCIAHOST */ @@ -99,6 +100,9 @@ static inline int ssb_pcmcia_switch_segment(struct ssb_bus *bus, { return 0; } +static inline void ssb_pcmcia_exit(struct ssb_bus *bus) +{ +} static inline int ssb_pcmcia_init(struct ssb_bus *bus) { return 0; @@ -113,6 +117,17 @@ extern int ssb_bus_scan(struct ssb_bus *bus, extern void ssb_iounmap(struct ssb_bus *ssb); +/* sprom.c */ +extern +ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf, + int (*sprom_read)(struct ssb_bus *bus, u16 *sprom)); +extern +ssize_t ssb_attr_sprom_store(struct ssb_bus *bus, + const char *buf, size_t count, + int (*sprom_check_crc)(const u16 *sprom, size_t size), + int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)); + + /* core.c */ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); extern int ssb_devices_freeze(struct ssb_bus *bus); @@ -120,6 +135,8 @@ extern int ssb_devices_thaw(struct ssb_bus *bus); extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); int ssb_for_each_bus_call(unsigned long data, int (*func)(struct ssb_bus *bus, unsigned long data)); +extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev); + /* b43_pci_bridge.c */ #ifdef CONFIG_SSB_B43_PCI_BRIDGE |