diff options
Diffstat (limited to 'drivers/staging/comedi/Kconfig')
| -rw-r--r-- | drivers/staging/comedi/Kconfig | 70 |
1 files changed, 32 insertions, 38 deletions
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 7871579bb83..8c8a5513225 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -110,15 +110,6 @@ menuconfig COMEDI_ISA_DRIVERS if COMEDI_ISA_DRIVERS -config COMEDI_ACL7225B - tristate "ADlink NuDAQ ACL-7225b and compatibles support" - ---help--- - Enable support for ADlink NuDAQ ACL-7225b and compatibles, - ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio) - - To compile this driver as a module, choose M here: the module will be - called acl7225b. - config COMEDI_PCL711 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" ---help--- @@ -137,14 +128,6 @@ config COMEDI_PCL724 To compile this driver as a module, choose M here: the module will be called pcl724. -config COMEDI_PCL725 - tristate "Advantech PCL-725 and compatible ISA card support" - ---help--- - Enable support for Advantech PCL-725 and compatible ISA cards. - - To compile this driver as a module, choose M here: the module will be - called pcl725. - config COMEDI_PCL726 tristate "Advantech PCL-726 and compatible ISA card support" ---help--- @@ -154,10 +137,21 @@ config COMEDI_PCL726 called pcl726. config COMEDI_PCL730 - tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support" + tristate "Simple Digital I/O board support (8-bit ports)" ---help--- - Enable support for Advantech PCL-730, ICP ISO-730 and ADlink - ACL-7130 ISA cards + Enable support for various simple ISA or PC/104 Digital I/O boards. + These boards all use 8-bit I/O ports. + + Advantech PCL-730 isolated - 16 in/16 out ttl - 16 in/16 out + ICP ISO-730 isolated - 16 in/16 out ttl - 16 in/16 out + ADlink ACL-7130 isolated - 16 in/16 out ttl - 16 in/16 out + Advantech PCM-3730 isolated - 8 in/8 out ttl - 16 in/16 out + Advantech PCL-725 isolated - 8 in/8 out + ICP P8R8-DIO isolated - 8 in/8 out + ADlink ACL-7225b isolated - 16 in/16 out + ICP P16R16-DIO isolated - 16 in/16 out + Advantech PCL-733 isolated - 32 in + Advantech PCL-734 isolated - 32 out To compile this driver as a module, choose M here: the module will be called pcl730. @@ -201,14 +195,6 @@ config COMEDI_PCM3724 To compile this driver as a module, choose M here: the module will be called pcm3724. -config COMEDI_PCM3730 - tristate "Advantech PCM-3730 and clone PC/104 board support" - ---help--- - Enable support for Advantech PCM-3730 and clone PC/104 boards - - To compile this driver as a module, choose M here: the module will be - called pcm3730. - config COMEDI_AMPLC_DIO200_ISA tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" select COMEDI_AMPLC_DIO200 @@ -543,12 +529,19 @@ config COMEDI_POC tristate "Generic driver for very simple devices" ---help--- Enable generic support for very simple / POC (Piece of Crap) boards, - Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and - PCL-734 (pcl734) + Keithley Metrabyte DAC-02 (dac02). To compile this driver as a module, choose M here: the module will be called poc. +config COMEDI_S526 + tristate "Sensoray s526 support" + ---help--- + Enable support for Sensoray s526 + + To compile this driver as a module, choose M here: the module will be + called s526. + endif # COMEDI_ISA_DRIVERS menuconfig COMEDI_PCI_DRIVERS @@ -981,6 +974,7 @@ config COMEDI_ME_DAQ config COMEDI_NI_6527 tristate "NI 6527 support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for the National Instruments 6527 PCI card @@ -990,6 +984,7 @@ config COMEDI_NI_6527 config COMEDI_NI_65XX tristate "NI 65xx static dio PCI card support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for National Instruments 65xx static dio boards. @@ -1003,6 +998,7 @@ config COMEDI_NI_65XX config COMEDI_NI_660X tristate "NI 660x counter/timer PCI card support" + depends on HAS_DMA select COMEDI_NI_TIOCMD ---help--- Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, @@ -1013,6 +1009,7 @@ config COMEDI_NI_660X config COMEDI_NI_670X tristate "NI 670x PCI card support" + depends on HAS_DMA select COMEDI_MITE ---help--- Enable support for National Instruments PCI-6703 and PCI-6704 @@ -1022,6 +1019,7 @@ config COMEDI_NI_670X config COMEDI_NI_LABPC_PCI tristate "NI Lab-PC PCI-1200 support" + depends on HAS_DMA select COMEDI_NI_LABPC select COMEDI_MITE ---help--- @@ -1032,6 +1030,7 @@ config COMEDI_NI_LABPC_PCI config COMEDI_NI_PCIDIO tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" + depends on HAS_DMA select COMEDI_MITE select COMEDI_8255 ---help--- @@ -1043,6 +1042,7 @@ config COMEDI_NI_PCIDIO config COMEDI_NI_PCIMIO tristate "NI PCI-MIO-E series and M series support" + depends on HAS_DMA select COMEDI_NI_TIOCMD select COMEDI_8255 select COMEDI_FC @@ -1069,14 +1069,6 @@ config COMEDI_RTD520 To compile this driver as a module, choose M here: the module will be called rtd520. -config COMEDI_S526 - tristate "Sensoray s526 support" - ---help--- - Enable support for Sensoray s526 - - To compile this driver as a module, choose M here: the module will be - called s526. - config COMEDI_S626 tristate "Sensoray 626 support" select COMEDI_FC @@ -1095,10 +1087,12 @@ config COMEDI_SSV_DNP called ssv_dnp. config COMEDI_MITE + depends on HAS_DMA tristate config COMEDI_NI_TIOCMD tristate + depends on HAS_DMA select COMEDI_NI_TIO select COMEDI_MITE |