diff options
Diffstat (limited to 'drivers/staging/cxt1e1/libsbew.h')
-rw-r--r-- | drivers/staging/cxt1e1/libsbew.h | 549 |
1 files changed, 0 insertions, 549 deletions
diff --git a/drivers/staging/cxt1e1/libsbew.h b/drivers/staging/cxt1e1/libsbew.h deleted file mode 100644 index bd2bfba604b..00000000000 --- a/drivers/staging/cxt1e1/libsbew.h +++ /dev/null @@ -1,549 +0,0 @@ -#ifndef _INC_LIBSBEW_H_ -#define _INC_LIBSBEW_H_ - -/*----------------------------------------------------------------------------- - * libsbew.h - common library elements, charge across mulitple boards - * - * This file contains common Ioctl structures and contents definitions. - * - * Copyright (C) 2004-2005 SBE, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * For further information, contact via email: support@sbei.com - * SBE, Inc. San Ramon, California U.S.A. - *----------------------------------------------------------------------------- - */ - -/********************************/ -/** set driver logging level **/ -/********************************/ - -/* routine/ioctl: wancfg_set_loglevel() - SBE_IOC_SET_LOGLEVEL */ - -#define LOG_NONE 0 -#define LOG_ERROR 1 -#define LOG_SBEBUG3 3 /* hidden, for development/debug usage */ -#define LOG_LSCHANGE 5 /* line state change logging */ -#define LOG_LSIMMEDIATE 6 /* line state change logging w/o hysterisis */ -#define LOG_WARN 8 -#define LOG_MONITOR 10 -#define LOG_SBEBUG12 12 /* hidden, for development/debug usage */ -#define LOG_MONITOR2 14 /* hidden, for development/debug usage */ -#define LOG_DEBUG 16 - - /* TEMPORARY DEFINES *//* RLD DEBUG */ -#define c4_LOG_NONE LOG_NONE -#define c4_LOG_ERROR LOG_ERROR -#define c4_LOG_WARN LOG_WARN -#define c4_LOG_sTrace LOG_MONITOR /* do some trace logging into - * functions */ -#define c4_LOG_DEBUG LOG_DEBUG -#define c4_LOG_MAX LOG_DEBUG - - - -/******************************/ -/** get driver information **/ -/******************************/ - -/* routine/ioctl: wancfg_get_drvinfo() - SBE_IOC_GET_DRVINFO */ - -#define REL_STRLEN 80 - struct sbe_drv_info - { - int rel_strlen; - char release[REL_STRLEN]; - }; - - -/*****************************/ -/** get board information **/ -/*****************************/ - -/* routine/ioctl: wancfg_get_brdinfo() - SBE_IOC_GET_BRDINFO */ - -#define CHNM_STRLEN 16 - struct sbe_brd_info - { - u_int32_t brd_id; /* SBE's unique PCI VENDOR/DEVID */ - u_int32_t brd_sn; - int brd_chan_cnt; /* number of channels being used */ - int brd_port_cnt; /* number of ports being used */ - unsigned char brdno; /* our board number */ - unsigned char brd_pci_speed; /* PCI speed, 33/66Mhz */ - u_int8_t brd_mac_addr[6]; - char first_iname[CHNM_STRLEN]; /* first assigned channel's - * interface name */ - char last_iname[CHNM_STRLEN]; /* last assigned channel's - * interface name */ - u_int8_t brd_hdw_id; /* on/board unique hdw ID */ - u_int8_t reserved8[3]; /* alignment preservation */ - u_int32_t reserved32[3]; /* size preservation */ - }; - -/* These IDs are sometimes available thru pci_ids.h, but not currently. */ - -#define PCI_VENDOR_ID_SBE 0x1176 -#define PCI_DEVICE_ID_WANPMC_C4T1E1 0x0701 /* BID 0x0X, BTYP 0x0X */ -#define PCI_DEVICE_ID_WANPTMC_C4T1E1 0x0702 /* BID 0x41 */ -#define PCI_DEVICE_ID_WANADAPT_HC4T1E1 0x0703 /* BID 0x44 */ -#define PCI_DEVICE_ID_WANPTMC_256T3_T1 0x0704 /* BID 0x42 (T1 Version) */ -#define PCI_DEVICE_ID_WANPCI_C4T1E1 0x0705 /* BID 0x1X, BTYP 0x0X */ -#define PCI_DEVICE_ID_WANPMC_C1T3 0x0706 /* BID 0x45 */ -#define PCI_DEVICE_ID_WANPCI_C2T1E1 0x0707 /* BID 0x1X, BTYP 0x2X */ -#define PCI_DEVICE_ID_WANPCI_C1T1E1 0x0708 /* BID 0x1X, BTYP 0x1X */ -#define PCI_DEVICE_ID_WANPMC_C2T1E1 0x0709 /* BID 0x0X, BTYP 0x2X */ -#define PCI_DEVICE_ID_WANPMC_C1T1E1 0x070A /* BID 0x0X, BTYP 0x1X */ -#define PCI_DEVICE_ID_WANPTMC_256T3_E1 0x070B /* BID 0x46 (E1 Version) */ -#define PCI_DEVICE_ID_WANPTMC_C24TE1 0x070C /* BID 0x47 */ -#define PCI_DEVICE_ID_WANPMC_C4T1E1_L 0x070D /* BID 0x2X, BTYPE 0x0X w/FP - * LEDs */ -#define PCI_DEVICE_ID_WANPMC_C2T1E1_L 0x070E /* BID 0x2X, BTYPE 0x2X w/FP - * LEDs */ -#define PCI_DEVICE_ID_WANPMC_C1T1E1_L 0x070F /* BID 0x2X, BTYPE 0x1X w/FP - * LEDs */ -#define PCI_DEVICE_ID_WANPMC_2SSI 0x0801 -#define PCI_DEVICE_ID_WANPCI_4SSI 0x0802 -#define PCI_DEVICE_ID_WANPMC_2T3E3 0x0900 /* BID 0x43 */ -#define SBE_BOARD_ID(v,id) ((v<<16) | id) - -#define BINFO_PCI_SPEED_unk 0 -#define BINFO_PCI_SPEED_33 1 -#define BINFO_PCI_SPEED_66 2 - -/***************************/ -/** obtain interface ID **/ -/***************************/ - -/* routine/ioctl: wancfg_get_iid() - SBE_IOC_IID_GET */ - - struct sbe_iid_info - { - u_int32_t channum; /* channel requested */ - char iname[CHNM_STRLEN]; /* channel's interface name */ - }; - -/**************************************/ -/** get board address information **/ -/**************************************/ - -/* routine/ioctl: wancfg_get_brdaddr() - SBE_IOC_BRDADDR_GET */ - - struct sbe_brd_addr - { - unsigned char func; /* select PCI address space function */ - unsigned char brdno; /* returns brdno requested */ - unsigned char irq; - unsigned char size; /* returns size of address */ -#define BRDADDR_SIZE_64 1 -#define BRDADDR_SIZE_32 2 - int reserved1; /* mod64 align, reserved for future use */ - - union - { - unsigned long virt64; /* virtual/mapped address */ - u_int32_t virt32[2]; - } v; - union - { - unsigned long phys64; /* physical bus address */ - u_int32_t phys32[2]; - } p; - int reserved2[4]; /* reserved for future use */ - }; - -/**********************************/ -/** read/write board registers **/ -/**********************************/ - -/* routine/ioctl: wancfg_read_vec() - SBE_IOC_READ_VEC */ -/* routine/ioctl: wancfg_write_vec() - SBE_IOC_WRITE_VEC */ - - struct sbecom_wrt_vec - { - u_int32_t reg; - u_int32_t data; - }; - -#define C1T3_CHIP_MSCC_32 0x01000000 -#define C1T3_CHIP_TECT3_8 0x02000000 -#define C1T3_CHIP_CPLD_8 0x03000000 -#define C1T3_CHIP_EEPROM_8 0x04000000 - -#define W256T3_CHIP_MUSYCC_32 0x02000000 -#define W256T3_CHIP_TEMUX_8 0x10000000 -#define W256T3_CHIP_T8110_8 0x20000000 -#define W256T3_CHIP_T8110_32 0x22000000 -#define W256T3_CHIP_CPLD_8 0x30000000 -#define W256T3_CHIP_EEPROM_8 0x40000000 - - -/**********************************/ -/** read write port parameters **/ -/**********************************/ - -/* routine/ioctl: wancfg_getset_port_param() - SBE_IOC_PORT_GET */ -/* routine/ioctl: wancfg_set_port_param() - SBE_IOC_PORT_SET */ - -/* NOTE: this structure supports hardware which supports individual per/port control */ - -struct sbecom_port_param -{ - u_int8_t portnum; - u_int8_t port_mode; /* variations of T1 or E1 mode */ - u_int8_t portStatus; - u_int8_t portP; /* more port parameters (clock source - 0x80; - * and LBO - 0xf; */ - /* bits 0x70 are reserved for future use ) */ -#ifdef SBE_PMCC4_ENABLE - u_int32_t hypersize; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */ -#endif - int reserved[3-1]; /* reserved for future use */ - int _res[4]; -}; - -#define CFG_CLK_PORT_MASK 0x80 /* Loop timing */ -#define CFG_CLK_PORT_INTERNAL 0x80 /* Loop timing */ -#define CFG_CLK_PORT_EXTERNAL 0x00 /* Loop timing */ - -#define CFG_LBO_MASK 0x0F -#define CFG_LBO_unk 0 /* <not defined> */ -#define CFG_LBO_LH0 1 /* T1 Long Haul (default) */ -#define CFG_LBO_LH7_5 2 /* T1 Long Haul */ -#define CFG_LBO_LH15 3 /* T1 Long Haul */ -#define CFG_LBO_LH22_5 4 /* T1 Long Haul */ -#define CFG_LBO_SH110 5 /* T1 Short Haul */ -#define CFG_LBO_SH220 6 /* T1 Short Haul */ -#define CFG_LBO_SH330 7 /* T1 Short Haul */ -#define CFG_LBO_SH440 8 /* T1 Short Haul */ -#define CFG_LBO_SH550 9 /* T1 Short Haul */ -#define CFG_LBO_SH660 10 /* T1 Short Haul */ -#define CFG_LBO_E75 11 /* E1 75 Ohm */ -#define CFG_LBO_E120 12 /* E1 120 Ohm (default) */ - - -/*************************************/ -/** read write channel parameters **/ -/*************************************/ - -/* routine/ioctl: wancfg_getset_chan_param() - SBE_IOC_CHAN_GET */ -/* routine/ioctl: wancfg_set_chan_param() - SBE_IOC_CHAN_SET */ - -/* NOTE: this structure supports hardware which supports individual per/channel control */ - - struct sbecom_chan_param - { - u_int32_t channum; /* 0: */ -#ifdef SBE_PMCC4_ENABLE - u_int32_t card; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */ - u_int32_t port; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */ - u_int8_t bitmask[32]; -#endif - u_int32_t intr_mask; /* 4: interrupt mask, specify ored - * (SS7_)INTR_* to disable */ - u_int8_t status; /* 8: channel transceiver status (TX_ENABLED, - * RX_ENABLED) */ - u_int8_t chan_mode; /* 9: protocol mode */ - u_int8_t idlecode; /* A: idle code, in (FLAG_7E, FLAG_FF, - * FLAG_00) */ - u_int8_t pad_fill_count; /* B: pad fill count (1-127), 0 - pad - * fill disabled */ - u_int8_t data_inv; /* C: channel data inversion selection */ - u_int8_t mode_56k; /* D: 56kbps mode */ - u_int8_t reserved[2 + 8]; /* E: */ - }; - -/* SS7 interrupt signals <intr_mask> */ -#define SS7_INTR_SFILT 0x00000020 -#define SS7_INTR_SDEC 0x00000040 -#define SS7_INTR_SINC 0x00000080 -#define SS7_INTR_SUERR 0x00000100 -/* Other interrupts that can be masked */ -#define INTR_BUFF 0x00000002 -#define INTR_EOM 0x00000004 -#define INTR_MSG 0x00000008 -#define INTR_IDLE 0x00000010 - -/* transceiver status flags <status> */ -#define TX_ENABLED 0x01 -#define RX_ENABLED 0x02 - -/* Protocol modes <mode> */ -#define CFG_CH_PROTO_TRANS 0 -#define CFG_CH_PROTO_SS7 1 -#define CFG_CH_PROTO_HDLC_FCS16 2 -#define CFG_CH_PROTO_HDLC_FCS32 3 -#define CFG_CH_PROTO_ISLP_MODE 4 - -/* Possible idle code assignments <idlecode> */ -#define CFG_CH_FLAG_7E 0 -#define CFG_CH_FLAG_FF 1 -#define CFG_CH_FLAG_00 2 - -/* data inversion selection <data_inv> */ -#define CFG_CH_DINV_NONE 0x00 -#define CFG_CH_DINV_RX 0x01 -#define CFG_CH_DINV_TX 0x02 - - -/* Possible resettable chipsets/functions */ -#define RESET_DEV_TEMUX 1 -#define RESET_DEV_TECT3 RESET_DEV_TEMUX -#define RESET_DEV_PLL 2 - - -/*********************************************/ -/** read reset channel thruput statistics **/ -/*********************************************/ - -/* routine/ioctl: wancfg_get_chan_stats() - SBE_IOC_CHAN_GET_STAT */ -/* routine/ioctl: wancfg_del_chan_stats() - SBE_IOC_CHAN_DEL_STAT */ -/* routine/ioctl: wancfg_get_card_chan_stats() - SBE_IOC_CARD_CHAN_STAT */ - - struct sbecom_chan_stats - { - unsigned long rx_packets; /* total packets received */ - unsigned long tx_packets; /* total packets transmitted */ - unsigned long rx_bytes; /* total bytes received */ - unsigned long tx_bytes; /* total bytes transmitted */ - unsigned long rx_errors;/* bad packets received */ - unsigned long tx_errors;/* packet transmit problems */ - unsigned long rx_dropped; /* no space in linux buffers */ - unsigned long tx_dropped; /* no space available in linux */ - - /* detailed rx_errors: */ - unsigned long rx_length_errors; - unsigned long rx_over_errors; /* receiver ring buff overflow */ - unsigned long rx_crc_errors; /* recved pkt with crc error */ - unsigned long rx_frame_errors; /* recv'd frame alignment error */ - unsigned long rx_fifo_errors; /* recv'r fifo overrun */ - unsigned long rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - unsigned long tx_aborted_errors; - unsigned long tx_fifo_errors; - unsigned long tx_pending; - }; - - -/****************************************/ -/** read write card level parameters **/ -/****************************************/ - - /* NOTE: this structure supports hardware which supports per/card control */ - - struct sbecom_card_param - { - u_int8_t framing_type; /* 0: CBP or M13 */ - u_int8_t loopback; /* 1: one of LOOPBACK_* */ - u_int8_t line_build_out; /* 2: boolean */ - u_int8_t receive_eq; /* 3: boolean */ - u_int8_t transmit_ones; /* 4: boolean */ - u_int8_t clock; /* 5: 0 - internal, i>0 - external (recovered - * from framer i) */ - u_int8_t h110enable; /* 6: */ - u_int8_t disable_leds; /* 7: */ - u_int8_t reserved1; /* 8: available - old 256t3 hypersized, but - * never used */ - u_int8_t rear_io; /* 9: rear I/O off/on */ - u_int8_t disable_tx; /* A: disable TX off/on */ - u_int8_t mute_los; /* B: mute LOS off/on */ - u_int8_t los_threshold; /* C: LOS threshold norm/low - * (default: norm) */ - u_int8_t ds1_mode; /* D: DS1 mode T1/E1 (default: T1) */ - u_int8_t ds3_unchan; /* E: DS3 unchannelized mode off/on */ - u_int8_t reserved[1 + 16]; /* reserved for expansion - must be - * ZERO filled */ - }; - -/* framing types <framing_type> */ -#define FRAMING_M13 0 -#define FRAMING_CBP 1 - -/* card level loopback options <loopback> */ -#define CFG_CARD_LOOPBACK_NONE 0x00 -#define CFG_CARD_LOOPBACK_DIAG 0x01 -#define CFG_CARD_LOOPBACK_LINE 0x02 -#define CFG_CARD_LOOPBACK_PAYLOAD 0x03 - -/* line level loopback options <loopback> */ -#define CFG_LIU_LOOPBACK_NONE 0x00 -#define CFG_LIU_LOOPBACK_ANALOG 0x10 -#define CFG_LIU_LOOPBACK_DIGITAL 0x11 -#define CFG_LIU_LOOPBACK_REMOTE 0x12 - -/* card level clock options <clock> */ -#define CFG_CLK_INTERNAL 0x00 -#define CFG_CLK_EXTERNAL 0x01 - -/* legacy 256T3 loopback values */ -#define LOOPBACK_NONE 0 -#define LOOPBACK_LIU_ANALOG 1 -#define LOOPBACK_LIU_DIGITAL 2 -#define LOOPBACK_FRAMER_DS3 3 -#define LOOPBACK_FRAMER_T1 4 -#define LOOPBACK_LIU_REMOTE 5 - -/* DS1 mode <ds1_mode> */ -#define CFG_DS1_MODE_MASK 0x0f -#define CFG_DS1_MODE_T1 0x00 -#define CFG_DS1_MODE_E1 0x01 -#define CFG_DS1_MODE_CHANGE 0x80 - -/* DS3 unchannelized values <ds1_unchan> */ -#define CFG_DS3_UNCHAN_MASK 0x01 -#define CFG_DS3_UNCHAN_OFF 0x00 -#define CFG_DS3_UNCHAN_ON 0x01 - - -/************************************/ -/** read write framer parameters **/ -/************************************/ - -/* routine/ioctl: wancfg_get_framer() - SBE_IOC_FRAMER_GET */ -/* routine/ioctl: wancfg_set_framer() - SBE_IOC_FRAMER_SET */ - - struct sbecom_framer_param - { - u_int8_t framer_num; - u_int8_t frame_type; /* SF, ESF, E1PLAIN, E1CAS, E1CRC, E1CRC+CAS */ - u_int8_t loopback_type; /* DIGITAL, LINE, PAYLOAD */ - u_int8_t auto_alarms;/* auto alarms */ - u_int8_t reserved[12]; /* reserved for expansion - must be - * ZERO filled */ - }; - -/* frame types <frame_type> */ -#define CFG_FRAME_NONE 0 -#define CFG_FRAME_SF 1 /* T1 B8ZS */ -#define CFG_FRAME_ESF 2 /* T1 B8ZS */ -#define CFG_FRAME_E1PLAIN 3 /* HDB3 w/o CAS,CRC */ -#define CFG_FRAME_E1CAS 4 /* HDB3 */ -#define CFG_FRAME_E1CRC 5 /* HDB3 */ -#define CFG_FRAME_E1CRC_CAS 6 /* HDB3 */ -#define CFG_FRAME_SF_AMI 7 /* T1 AMI */ -#define CFG_FRAME_ESF_AMI 8 /* T1 AMI */ -#define CFG_FRAME_E1PLAIN_AMI 9 /* E1 AMI w/o CAS,CRC */ -#define CFG_FRAME_E1CAS_AMI 10 /* E1 AMI */ -#define CFG_FRAME_E1CRC_AMI 11 /* E1 AMI */ -#define CFG_FRAME_E1CRC_CAS_AMI 12 /* E1 AMI */ - -#define IS_FRAME_ANY_T1(field) \ - (((field) == CFG_FRAME_NONE) || \ - ((field) == CFG_FRAME_SF) || \ - ((field) == CFG_FRAME_ESF) || \ - ((field) == CFG_FRAME_SF_AMI) || \ - ((field) == CFG_FRAME_ESF_AMI)) - -#define IS_FRAME_ANY_T1ESF(field) \ - (((field) == CFG_FRAME_ESF) || \ - ((field) == CFG_FRAME_ESF_AMI)) - -#define IS_FRAME_ANY_E1(field) \ - (((field) == CFG_FRAME_E1PLAIN) || \ - ((field) == CFG_FRAME_E1CAS) || \ - ((field) == CFG_FRAME_E1CRC) || \ - ((field) == CFG_FRAME_E1CRC_CAS) || \ - ((field) == CFG_FRAME_E1PLAIN_AMI) || \ - ((field) == CFG_FRAME_E1CAS_AMI) || \ - ((field) == CFG_FRAME_E1CRC_AMI) || \ - ((field) == CFG_FRAME_E1CRC_CAS_AMI)) - -#define IS_FRAME_ANY_AMI(field) \ - (((field) == CFG_FRAME_SF_AMI) || \ - ((field) == CFG_FRAME_ESF_AMI) || \ - ((field) == CFG_FRAME_E1PLAIN_AMI) || \ - ((field) == CFG_FRAME_E1CAS_AMI) || \ - ((field) == CFG_FRAME_E1CRC_AMI) || \ - ((field) == CFG_FRAME_E1CRC_CAS_AMI)) - -/* frame level loopback options <loopback_type> */ -#define CFG_FRMR_LOOPBACK_NONE 0 -#define CFG_FRMR_LOOPBACK_DIAG 1 -#define CFG_FRMR_LOOPBACK_LINE 2 -#define CFG_FRMR_LOOPBACK_PAYLOAD 3 - - -/****************************************/ -/** read reset card error statistics **/ -/****************************************/ - -/* routine/ioctl: wancfg_get_card_stats() - SBE_IOC_CARD_GET_STAT */ -/* routine/ioctl: wancfg_del_card_stats() - SBE_IOC_CARD_DEL_STAT */ - - struct temux_card_stats - { - struct temux_stats - { - /* TEMUX DS3 PMON counters */ - u_int32_t lcv; - u_int32_t err_framing; - u_int32_t febe; - u_int32_t err_cpbit; - u_int32_t err_parity; - /* TEMUX DS3 FRMR status */ - u_int8_t los; - u_int8_t oof; - u_int8_t red; - u_int8_t yellow; - u_int8_t idle; - u_int8_t ais; - u_int8_t cbit; - /* TEMUX DS3 FEAC receiver */ - u_int8_t feac; - u_int8_t feac_last; - } t; - u_int32_t tx_pending; /* total */ - }; - -/**************************************************************/ - - struct wancfg - { - int cs, ds; - char *p; - }; - typedef struct wancfg wcfg_t; - - extern wcfg_t *wancfg_init(char *, char *); - extern int wancfg_card_blink(wcfg_t *, int); - extern int wancfg_ctl(wcfg_t *, int, void *, int, void *, int); - extern int wancfg_del_card_stats(wcfg_t *); - extern int wancfg_del_chan_stats(wcfg_t *, int); - extern int wancfg_enable_ports(wcfg_t *, int); - extern int wancfg_free(wcfg_t *); - extern int wancfg_get_brdaddr(wcfg_t *, struct sbe_brd_addr *); - extern int wancfg_get_brdinfo(wcfg_t *, struct sbe_brd_info *); - extern int wancfg_get_card(wcfg_t *, struct sbecom_card_param *); - extern int wancfg_get_card_chan_stats(wcfg_t *, struct sbecom_chan_stats *); - extern int wancfg_get_card_sn(wcfg_t *); - extern int wancfg_get_card_stats(wcfg_t *, struct temux_card_stats *); - extern int wancfg_get_chan(wcfg_t *, int, struct sbecom_chan_param *); - extern int wancfg_get_chan_stats(wcfg_t *, int, struct sbecom_chan_stats *); - extern int wancfg_get_drvinfo(wcfg_t *, int, struct sbe_drv_info *); - extern int wancfg_get_framer(wcfg_t *, int, struct sbecom_framer_param *); - extern int wancfg_get_iid(wcfg_t *, int, struct sbe_iid_info *); - extern int wancfg_get_sn(wcfg_t *, unsigned int *); - extern int wancfg_read(wcfg_t *, int, struct sbecom_wrt_vec *); - extern int wancfg_reset_device(wcfg_t *, int); - extern int wancfg_set_card(wcfg_t *, struct sbecom_card_param *); - extern int wancfg_set_chan(wcfg_t *, int, struct sbecom_chan_param *); - extern int wancfg_set_framer(wcfg_t *, int, struct sbecom_framer_param *); - extern int wancfg_set_loglevel(wcfg_t *, uint); - extern int wancfg_write(wcfg_t *, int, struct sbecom_wrt_vec *); - -#ifdef NOT_YET_COMMON - extern int wancfg_get_tsioc(wcfg_t *, struct wanc1t3_ts_hdr *, struct wanc1t3_ts_param *); - extern int wancfg_set_tsioc(wcfg_t *, struct wanc1t3_ts_param *); -#endif - -#endif /*** _INC_LIBSBEW_H_ ***/ |