diff options
Diffstat (limited to 'drivers/staging/et131x')
-rw-r--r-- | drivers/staging/et131x/README | 4 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x.c | 841 | ||||
-rw-r--r-- | drivers/staging/et131x/et131x.h | 40 |
3 files changed, 322 insertions, 563 deletions
diff --git a/drivers/staging/et131x/README b/drivers/staging/et131x/README index 8da96a6d2c9..3befc45fab8 100644 --- a/drivers/staging/et131x/README +++ b/drivers/staging/et131x/README @@ -13,10 +13,6 @@ TODO: - Implement NAPI support - In et131x_tx(), don't return NETDEV_TX_BUSY, just drop the packet with kfree_skb(). - Reduce the number of split lines by careful consideration of variable names etc. - - Do this in et131x.c: - struct fbr_lookup *fbr; - fbr = rx_local->fbr[id]; - Then replace all the instances of "rx_local->fbr[id]" with fbr. Please send patches to: Greg Kroah-Hartman <gregkh@linuxfoundation.org> diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index ab8b29d2cb2..e516bb69f3b 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -54,7 +54,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/pci.h> -#include <linux/init.h> #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> @@ -813,20 +812,21 @@ static void et131x_rx_dma_enable(struct et131x_adapter *adapter) { /* Setup the receive dma configuration register for normal operation */ u32 csr = ET_RXDMA_CSR_FBR1_ENABLE; + struct rx_ring *rx_ring = &adapter->rx_ring; - if (adapter->rx_ring.fbr[1]->buffsize == 4096) + if (rx_ring->fbr[1]->buffsize == 4096) csr |= ET_RXDMA_CSR_FBR1_SIZE_LO; - else if (adapter->rx_ring.fbr[1]->buffsize == 8192) + else if (rx_ring->fbr[1]->buffsize == 8192) csr |= ET_RXDMA_CSR_FBR1_SIZE_HI; - else if (adapter->rx_ring.fbr[1]->buffsize == 16384) + else if (rx_ring->fbr[1]->buffsize == 16384) csr |= ET_RXDMA_CSR_FBR1_SIZE_LO | ET_RXDMA_CSR_FBR1_SIZE_HI; csr |= ET_RXDMA_CSR_FBR0_ENABLE; - if (adapter->rx_ring.fbr[0]->buffsize == 256) + if (rx_ring->fbr[0]->buffsize == 256) csr |= ET_RXDMA_CSR_FBR0_SIZE_LO; - else if (adapter->rx_ring.fbr[0]->buffsize == 512) + else if (rx_ring->fbr[0]->buffsize == 512) csr |= ET_RXDMA_CSR_FBR0_SIZE_HI; - else if (adapter->rx_ring.fbr[0]->buffsize == 1024) + else if (rx_ring->fbr[0]->buffsize == 1024) csr |= ET_RXDMA_CSR_FBR0_SIZE_LO | ET_RXDMA_CSR_FBR0_SIZE_HI; writel(csr, &adapter->regs->rxdma.csr); @@ -968,7 +968,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) /* Set up the if mode bits */ cfg2 &= ~ET_MAC_CFG2_IFMODE_MASK; - if (phydev && phydev->speed == SPEED_1000) { + if (phydev->speed == SPEED_1000) { cfg2 |= ET_MAC_CFG2_IFMODE_1000; /* Phy mode bit */ ifctrl &= ~ET_MAC_IFCTRL_PHYMODE; @@ -999,11 +999,11 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) cfg2 &= ~ET_MAC_CFG2_IFMODE_FULL_DPLX; /* Turn on duplex if needed */ - if (phydev && phydev->duplex == DUPLEX_FULL) + if (phydev->duplex == DUPLEX_FULL) cfg2 |= ET_MAC_CFG2_IFMODE_FULL_DPLX; ifctrl &= ~ET_MAC_IFCTRL_GHDMODE; - if (phydev && phydev->duplex == DUPLEX_HALF) + if (phydev->duplex == DUPLEX_HALF) ifctrl |= ET_MAC_IFCTRL_GHDMODE; writel(ifctrl, &mac->if_ctrl); @@ -1039,9 +1039,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) */ static int et1310_in_phy_coma(struct et131x_adapter *adapter) { - u32 pmcsr; - - pmcsr = readl(&adapter->regs->global.pm_csr); + u32 pmcsr = readl(&adapter->regs->global.pm_csr); return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0; } @@ -1351,8 +1349,6 @@ static void et1310_config_macstat_regs(struct et131x_adapter *adapter) * @addr: the address of the transceiver * @reg: the register to read * @value: pointer to a 16-bit value in which the value will be stored - * - * Returns 0 on success, errno on failure (as defined in errno.h) */ static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, u8 reg, u16 *value) @@ -1425,10 +1421,6 @@ static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) * @adapter: pointer to our private adapter structure * @reg: the register to read * @value: 16-bit value to write - * - * FIXME: one caller in netdev still - * - * Return 0 on success, errno on failure (as defined in errno.h) */ static int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value) { @@ -1494,10 +1486,10 @@ static int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value) return status; } -/* Still used from _mac for BIT_READ */ -static void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, - u16 action, u16 regnum, u16 bitnum, - u8 *value) +static void et1310_phy_read_mii_bit(struct et131x_adapter *adapter, + u16 regnum, + u16 bitnum, + u8 *value) { u16 reg; u16 mask = 1 << bitnum; @@ -1505,22 +1497,7 @@ static void et1310_phy_access_mii_bit(struct et131x_adapter *adapter, /* Read the requested register */ et131x_mii_read(adapter, regnum, ®); - switch (action) { - case TRUEPHY_BIT_READ: - *value = (reg & mask) >> bitnum; - break; - - case TRUEPHY_BIT_SET: - et131x_mii_write(adapter, regnum, reg | mask); - break; - - case TRUEPHY_BIT_CLEAR: - et131x_mii_write(adapter, regnum, reg & ~mask); - break; - - default: - break; - } + *value = (reg & mask) >> bitnum; } static void et1310_config_flow_control(struct et131x_adapter *adapter) @@ -1532,27 +1509,19 @@ static void et1310_config_flow_control(struct et131x_adapter *adapter) } else { char remote_pause, remote_async_pause; - et1310_phy_access_mii_bit(adapter, - TRUEPHY_BIT_READ, 5, 10, &remote_pause); - et1310_phy_access_mii_bit(adapter, - TRUEPHY_BIT_READ, 5, 11, - &remote_async_pause); + et1310_phy_read_mii_bit(adapter, 5, 10, &remote_pause); + et1310_phy_read_mii_bit(adapter, 5, 11, &remote_async_pause); - if ((remote_pause == TRUEPHY_BIT_SET) && - (remote_async_pause == TRUEPHY_BIT_SET)) { + if (remote_pause && remote_async_pause) { adapter->flowcontrol = adapter->wanted_flow; - } else if ((remote_pause == TRUEPHY_BIT_SET) && - (remote_async_pause == TRUEPHY_BIT_CLEAR)) { + } else if (remote_pause && !remote_async_pause) { if (adapter->wanted_flow == FLOW_BOTH) adapter->flowcontrol = FLOW_BOTH; else adapter->flowcontrol = FLOW_NONE; - } else if ((remote_pause == TRUEPHY_BIT_CLEAR) && - (remote_async_pause == TRUEPHY_BIT_CLEAR)) { + } else if (!remote_pause && !remote_async_pause) { adapter->flowcontrol = FLOW_NONE; - } else {/* if (remote_pause == TRUEPHY_CLEAR_BIT && - * remote_async_pause == TRUEPHY_SET_BIT) - */ + } else { if (adapter->wanted_flow == FLOW_BOTH) adapter->flowcontrol = FLOW_RXONLY; else @@ -1561,9 +1530,7 @@ static void et1310_config_flow_control(struct et131x_adapter *adapter) } } -/* et1310_update_macstat_host_counters - Update the local copy of the statistics - * @adapter: pointer to the adapter structure - */ +/* et1310_update_macstat_host_counters - Update local copy of the statistics */ static void et1310_update_macstat_host_counters(struct et131x_adapter *adapter) { struct ce_stats *stats = &adapter->stats; @@ -1589,7 +1556,6 @@ static void et1310_update_macstat_host_counters(struct et131x_adapter *adapter) } /* et1310_handle_macstat_interrupt - * @adapter: pointer to the adapter structure * * One of the MACSTAT counters has wrapped. Update the local copy of * the statistics held in the adapter structure, checking the "wrap" @@ -1679,7 +1645,7 @@ static int et131x_mdio_reset(struct mii_bus *bus) return 0; } -/* et1310_phy_power_down - PHY power control +/* et1310_phy_power_switch - PHY power control * @adapter: device to control * @down: true for off/false for back on * @@ -1688,7 +1654,7 @@ static int et131x_mdio_reset(struct mii_bus *bus) * Can't you see that this code processed * Phy power, phy power.. */ -static void et1310_phy_power_down(struct et131x_adapter *adapter, bool down) +static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down) { u16 data; @@ -1699,10 +1665,7 @@ static void et1310_phy_power_down(struct et131x_adapter *adapter, bool down) et131x_mii_write(adapter, MII_BMCR, data); } -/* et131x_xcvr_init - Init the phy if we are setting it into force mode - * @adapter: pointer to our private adapter structure - * - */ +/* et131x_xcvr_init - Init the phy if we are setting it into force mode */ static void et131x_xcvr_init(struct et131x_adapter *adapter) { u16 lcr2; @@ -1731,7 +1694,6 @@ static void et131x_xcvr_init(struct et131x_adapter *adapter) } /* et131x_configure_global_regs - configure JAGCore global regs - * @adapter: pointer to our adapter structure * * Used to configure the global registers on the JAGCore */ @@ -1776,9 +1738,7 @@ static void et131x_configure_global_regs(struct et131x_adapter *adapter) writel(0, ®s->watchdog_timer); } -/* et131x_config_rx_dma_regs - Start of Rx_DMA init sequence - * @adapter: pointer to our adapter structure - */ +/* et131x_config_rx_dma_regs - Start of Rx_DMA init sequence */ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) { struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma; @@ -1821,6 +1781,7 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) u32 __iomem *min_des; u32 __iomem *base_hi; u32 __iomem *base_lo; + struct fbr_lookup *fbr = rx_local->fbr[id]; if (id == 0) { num_des = &rx_dma->fbr0_num_des; @@ -1837,12 +1798,10 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) } /* Now's the best time to initialize FBR contents */ - fbr_entry = - (struct fbr_desc *) rx_local->fbr[id]->ring_virtaddr; - for (entry = 0; - entry < rx_local->fbr[id]->num_entries; entry++) { - fbr_entry->addr_hi = rx_local->fbr[id]->bus_high[entry]; - fbr_entry->addr_lo = rx_local->fbr[id]->bus_low[entry]; + fbr_entry = fbr->ring_virtaddr; + for (entry = 0; entry < fbr->num_entries; entry++) { + fbr_entry->addr_hi = fbr->bus_high[entry]; + fbr_entry->addr_lo = fbr->bus_low[entry]; fbr_entry->word2 = entry; fbr_entry++; } @@ -1850,19 +1809,16 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) /* Set the address and parameters of Free buffer ring 1 and 0 * into the 1310's registers */ - writel(upper_32_bits(rx_local->fbr[id]->ring_physaddr), - base_hi); - writel(lower_32_bits(rx_local->fbr[id]->ring_physaddr), - base_lo); - writel(rx_local->fbr[id]->num_entries - 1, num_des); + writel(upper_32_bits(fbr->ring_physaddr), base_hi); + writel(lower_32_bits(fbr->ring_physaddr), base_lo); + writel(fbr->num_entries - 1, num_des); writel(ET_DMA10_WRAP, full_offset); /* This variable tracks the free buffer ring 1 full position, * so it has to match the above. */ - rx_local->fbr[id]->local_full = ET_DMA10_WRAP; - writel(((rx_local->fbr[id]->num_entries * - LO_MARK_PERCENT_FOR_RX) / 100) - 1, + fbr->local_full = ET_DMA10_WRAP; + writel(((fbr->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, min_des); } @@ -1884,7 +1840,6 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) } /* et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore. - * @adapter: pointer to our private adapter structure * * Configure the transmit engine with the ring buffers we have created * and prepare it for use. @@ -1892,33 +1847,26 @@ static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) static void et131x_config_tx_dma_regs(struct et131x_adapter *adapter) { struct txdma_regs __iomem *txdma = &adapter->regs->txdma; + struct tx_ring *tx_ring = &adapter->tx_ring; /* Load the hardware with the start of the transmit descriptor ring. */ - writel(upper_32_bits(adapter->tx_ring.tx_desc_ring_pa), - &txdma->pr_base_hi); - writel(lower_32_bits(adapter->tx_ring.tx_desc_ring_pa), - &txdma->pr_base_lo); + writel(upper_32_bits(tx_ring->tx_desc_ring_pa), &txdma->pr_base_hi); + writel(lower_32_bits(tx_ring->tx_desc_ring_pa), &txdma->pr_base_lo); /* Initialise the transmit DMA engine */ writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des); /* Load the completion writeback physical address */ - writel(upper_32_bits(adapter->tx_ring.tx_status_pa), - &txdma->dma_wb_base_hi); - writel(lower_32_bits(adapter->tx_ring.tx_status_pa), - &txdma->dma_wb_base_lo); + writel(upper_32_bits(tx_ring->tx_status_pa), &txdma->dma_wb_base_hi); + writel(lower_32_bits(tx_ring->tx_status_pa), &txdma->dma_wb_base_lo); - *adapter->tx_ring.tx_status = 0; + *tx_ring->tx_status = 0; writel(0, &txdma->service_request); - adapter->tx_ring.send_idx = 0; + tx_ring->send_idx = 0; } -/* et131x_adapter_setup - Set the adapter up as per cassini+ documentation - * @adapter: pointer to our private adapter structure - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ +/* et131x_adapter_setup - Set the adapter up as per cassini+ documentation */ static void et131x_adapter_setup(struct et131x_adapter *adapter) { /* Configure the JAGCore */ @@ -1938,13 +1886,11 @@ static void et131x_adapter_setup(struct et131x_adapter *adapter) et1310_config_macstat_regs(adapter); - et1310_phy_power_down(adapter, 0); + et1310_phy_power_switch(adapter, 0); et131x_xcvr_init(adapter); } -/* et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310 - * @adapter: pointer to our private adapter structure - */ +/* et131x_soft_reset - Issue soft reset to the hardware, complete for ET1310 */ static void et131x_soft_reset(struct et131x_adapter *adapter) { u32 reg; @@ -1965,7 +1911,6 @@ static void et131x_soft_reset(struct et131x_adapter *adapter) } /* et131x_enable_interrupts - enable interrupt - * @adapter: et131x device * * Enable the appropriate interrupts on the ET131x according to our * configuration @@ -1976,7 +1921,7 @@ static void et131x_enable_interrupts(struct et131x_adapter *adapter) /* Enable all global interrupts */ if (adapter->flowcontrol == FLOW_TXONLY || - adapter->flowcontrol == FLOW_BOTH) + adapter->flowcontrol == FLOW_BOTH) mask = INT_MASK_ENABLE; else mask = INT_MASK_ENABLE_NO_FLOW; @@ -1985,7 +1930,6 @@ static void et131x_enable_interrupts(struct et131x_adapter *adapter) } /* et131x_disable_interrupts - interrupt disable - * @adapter: et131x device * * Block all interrupts from the et131x device at the device itself */ @@ -1995,9 +1939,7 @@ static void et131x_disable_interrupts(struct et131x_adapter *adapter) writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); } -/* et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 - * @adapter: pointer to our adapter structure - */ +/* et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310 */ static void et131x_tx_dma_disable(struct et131x_adapter *adapter) { /* Setup the tramsmit dma configuration register */ @@ -2005,9 +1947,7 @@ static void et131x_tx_dma_disable(struct et131x_adapter *adapter) &adapter->regs->txdma.csr); } -/* et131x_enable_txrx - Enable tx/rx queues - * @netdev: device to be enabled - */ +/* et131x_enable_txrx - Enable tx/rx queues */ static void et131x_enable_txrx(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -2024,9 +1964,7 @@ static void et131x_enable_txrx(struct net_device *netdev) netif_start_queue(netdev); } -/* et131x_disable_txrx - Disable tx/rx queues - * @netdev: device to be disabled - */ +/* et131x_disable_txrx - Disable tx/rx queues */ static void et131x_disable_txrx(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -2042,18 +1980,12 @@ static void et131x_disable_txrx(struct net_device *netdev) et131x_disable_interrupts(adapter); } -/* et131x_init_send - Initialize send data structures - * @adapter: pointer to our private adapter structure - */ +/* et131x_init_send - Initialize send data structures */ static void et131x_init_send(struct et131x_adapter *adapter) { - struct tcb *tcb; u32 ct; - struct tx_ring *tx_ring; - - /* Setup some convenience pointers */ - tx_ring = &adapter->tx_ring; - tcb = adapter->tx_ring.tcb_ring; + struct tx_ring *tx_ring = &adapter->tx_ring; + struct tcb *tcb = tx_ring->tcb_ring; tx_ring->tcb_qhead = tcb; @@ -2076,7 +2008,6 @@ static void et131x_init_send(struct et131x_adapter *adapter) } /* et1310_enable_phy_coma - called when network cable is unplugged - * @adapter: pointer to our adapter structure * * driver receive an phy status change interrupt while in D0 and check that * phy_status is down. @@ -2104,11 +2035,6 @@ static void et1310_enable_phy_coma(struct et131x_adapter *adapter) /* Save the GbE PHY speed and duplex modes. Need to restore this * when cable is plugged back in */ - /* TODO - when PM is re-enabled, check if we need to - * perform a similar task as this - - * adapter->pdown_speed = adapter->ai_force_speed; - * adapter->pdown_duplex = adapter->ai_force_duplex; - */ /* Stop sending packets. */ spin_lock_irqsave(&adapter->send_hw_lock, flags); @@ -2128,9 +2054,7 @@ static void et1310_enable_phy_coma(struct et131x_adapter *adapter) writel(pmcsr, &adapter->regs->global.pm_csr); } -/* et1310_disable_phy_coma - Disable the Phy Coma Mode - * @adapter: pointer to our adapter structure - */ +/* et1310_disable_phy_coma - Disable the Phy Coma Mode */ static void et1310_disable_phy_coma(struct et131x_adapter *adapter) { u32 pmcsr; @@ -2145,11 +2069,6 @@ static void et1310_disable_phy_coma(struct et131x_adapter *adapter) /* Restore the GbE PHY speed and duplex modes; * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY */ - /* TODO - when PM is re-enabled, check if we need to - * perform a similar task as this - - * adapter->ai_force_speed = adapter->pdown_speed; - * adapter->ai_force_duplex = adapter->pdown_duplex; - */ /* Re-initialize the send structures */ et131x_init_send(adapter); @@ -2183,15 +2102,12 @@ static inline u32 bump_free_buff_ring(u32 *free_buff_ring, u32 limit) tmp_free_buff_ring ^= ET_DMA10_WRAP; } /* For the 1023 case */ - tmp_free_buff_ring &= (ET_DMA10_MASK|ET_DMA10_WRAP); + tmp_free_buff_ring &= (ET_DMA10_MASK | ET_DMA10_WRAP); *free_buff_ring = tmp_free_buff_ring; return tmp_free_buff_ring; } /* et131x_rx_dma_memory_alloc - * @adapter: pointer to our private adapter structure - * - * Returns 0 on success and errno on failure (as defined in errno.h) * * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required, * and the Packet Status Ring. @@ -2203,10 +2119,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) u32 bufsize; u32 pktstat_ringsize; u32 fbr_chunksize; - struct rx_ring *rx_ring; - - /* Setup some convenience pointers */ - rx_ring = &adapter->rx_ring; + struct rx_ring *rx_ring = &adapter->rx_ring; + struct fbr_lookup *fbr; /* Alloc memory for the lookup table */ rx_ring->fbr[0] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL); @@ -2247,20 +2161,18 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) rx_ring->fbr[1]->num_entries = 128; } - adapter->rx_ring.psr_num_entries = - adapter->rx_ring.fbr[0]->num_entries + - adapter->rx_ring.fbr[1]->num_entries; + rx_ring->psr_num_entries = rx_ring->fbr[0]->num_entries + + rx_ring->fbr[1]->num_entries; for (id = 0; id < NUM_FBRS; id++) { + fbr = rx_ring->fbr[id]; /* Allocate an area of memory for Free Buffer Ring */ - bufsize = - (sizeof(struct fbr_desc) * rx_ring->fbr[id]->num_entries); - rx_ring->fbr[id]->ring_virtaddr = - dma_alloc_coherent(&adapter->pdev->dev, - bufsize, - &rx_ring->fbr[id]->ring_physaddr, - GFP_KERNEL); - if (!rx_ring->fbr[id]->ring_virtaddr) { + bufsize = sizeof(struct fbr_desc) * fbr->num_entries; + fbr->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev, + bufsize, + &fbr->ring_physaddr, + GFP_KERNEL); + if (!fbr->ring_virtaddr) { dev_err(&adapter->pdev->dev, "Cannot alloc memory for Free Buffer Ring %d\n", id); return -ENOMEM; @@ -2268,25 +2180,25 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) } for (id = 0; id < NUM_FBRS; id++) { - fbr_chunksize = (FBR_CHUNKS * rx_ring->fbr[id]->buffsize); + fbr = rx_ring->fbr[id]; + fbr_chunksize = (FBR_CHUNKS * fbr->buffsize); - for (i = 0; - i < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS); i++) { + for (i = 0; i < fbr->num_entries / FBR_CHUNKS; i++) { dma_addr_t fbr_tmp_physaddr; - rx_ring->fbr[id]->mem_virtaddrs[i] = dma_alloc_coherent( + fbr->mem_virtaddrs[i] = dma_alloc_coherent( &adapter->pdev->dev, fbr_chunksize, - &rx_ring->fbr[id]->mem_physaddrs[i], + &fbr->mem_physaddrs[i], GFP_KERNEL); - if (!rx_ring->fbr[id]->mem_virtaddrs[i]) { + if (!fbr->mem_virtaddrs[i]) { dev_err(&adapter->pdev->dev, "Could not alloc memory\n"); return -ENOMEM; } /* See NOTE in "Save Physical Address" comment above */ - fbr_tmp_physaddr = rx_ring->fbr[id]->mem_physaddrs[i]; + fbr_tmp_physaddr = fbr->mem_physaddrs[i]; for (j = 0; j < FBR_CHUNKS; j++) { u32 index = (i * FBR_CHUNKS) + j; @@ -2294,26 +2206,25 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) /* Save the Virtual address of this index for * quick access later */ - rx_ring->fbr[id]->virt[index] = - (u8 *) rx_ring->fbr[id]->mem_virtaddrs[i] + - (j * rx_ring->fbr[id]->buffsize); + fbr->virt[index] = (u8 *)fbr->mem_virtaddrs[i] + + (j * fbr->buffsize); /* now store the physical address in the * descriptor so the device can access it */ - rx_ring->fbr[id]->bus_high[index] = + fbr->bus_high[index] = upper_32_bits(fbr_tmp_physaddr); - rx_ring->fbr[id]->bus_low[index] = + fbr->bus_low[index] = lower_32_bits(fbr_tmp_physaddr); - fbr_tmp_physaddr += rx_ring->fbr[id]->buffsize; + fbr_tmp_physaddr += fbr->buffsize; } } } /* Allocate an area of memory for FIFO of Packet Status ring entries */ pktstat_ringsize = - sizeof(struct pkt_stat_desc) * adapter->rx_ring.psr_num_entries; + sizeof(struct pkt_stat_desc) * rx_ring->psr_num_entries; rx_ring->ps_ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev, pktstat_ringsize, @@ -2325,8 +2236,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) "Cannot alloc memory for Packet Status Ring\n"); return -ENOMEM; } - pr_info("Packet Status Ring %llx\n", - (unsigned long long) rx_ring->ps_ring_physaddr); /* NOTE : dma_alloc_coherent(), used above to alloc DMA regions, * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses @@ -2345,7 +2254,6 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) return -ENOMEM; } rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD; - pr_info("PRS %llx\n", (unsigned long long)rx_ring->rx_status_bus); /* The RFDs are going to be put on lists later on, so initialize the * lists now. @@ -2354,9 +2262,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) return 0; } -/* et131x_rx_dma_memory_free - Free all memory allocated within this module. - * @adapter: pointer to our private adapter structure - */ +/* et131x_rx_dma_memory_free - Free all memory allocated within this module */ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) { u8 id; @@ -2364,17 +2270,15 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) u32 bufsize; u32 pktstat_ringsize; struct rfd *rfd; - struct rx_ring *rx_ring; - - /* Setup some convenience pointers */ - rx_ring = &adapter->rx_ring; + struct rx_ring *rx_ring = &adapter->rx_ring; + struct fbr_lookup *fbr; /* Free RFDs and associated packet descriptors */ WARN_ON(rx_ring->num_ready_recv != rx_ring->num_rfd); while (!list_empty(&rx_ring->recv_list)) { - rfd = (struct rfd *) list_entry(rx_ring->recv_list.next, - struct rfd, list_node); + rfd = list_entry(rx_ring->recv_list.next, + struct rfd, list_node); list_del(&rfd->list_node); rfd->skb = NULL; @@ -2383,40 +2287,41 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) /* Free Free Buffer Rings */ for (id = 0; id < NUM_FBRS; id++) { - if (!rx_ring->fbr[id]->ring_virtaddr) + fbr = rx_ring->fbr[id]; + + if (!fbr->ring_virtaddr) continue; /* First the packet memory */ for (index = 0; - index < (rx_ring->fbr[id]->num_entries / FBR_CHUNKS); + index < fbr->num_entries / FBR_CHUNKS; index++) { - if (rx_ring->fbr[id]->mem_virtaddrs[index]) { - bufsize = - rx_ring->fbr[id]->buffsize * FBR_CHUNKS; + if (fbr->mem_virtaddrs[index]) { + bufsize = fbr->buffsize * FBR_CHUNKS; dma_free_coherent(&adapter->pdev->dev, - bufsize, - rx_ring->fbr[id]->mem_virtaddrs[index], - rx_ring->fbr[id]->mem_physaddrs[index]); + bufsize, + fbr->mem_virtaddrs[index], + fbr->mem_physaddrs[index]); - rx_ring->fbr[id]->mem_virtaddrs[index] = NULL; + fbr->mem_virtaddrs[index] = NULL; } } - bufsize = - sizeof(struct fbr_desc) * rx_ring->fbr[id]->num_entries; + bufsize = sizeof(struct fbr_desc) * fbr->num_entries; - dma_free_coherent(&adapter->pdev->dev, bufsize, - rx_ring->fbr[id]->ring_virtaddr, - rx_ring->fbr[id]->ring_physaddr); + dma_free_coherent(&adapter->pdev->dev, + bufsize, + fbr->ring_virtaddr, + fbr->ring_physaddr); - rx_ring->fbr[id]->ring_virtaddr = NULL; + fbr->ring_virtaddr = NULL; } /* Free Packet Status Ring */ if (rx_ring->ps_ring_virtaddr) { pktstat_ringsize = sizeof(struct pkt_stat_desc) * - adapter->rx_ring.psr_num_entries; + rx_ring->psr_num_entries; dma_free_coherent(&adapter->pdev->dev, pktstat_ringsize, rx_ring->ps_ring_virtaddr, @@ -2441,20 +2346,12 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) rx_ring->num_ready_recv = 0; } -/* et131x_init_recv - Initialize receive data structures. - * @adapter: pointer to our private adapter structure - * - * Returns 0 on success and errno on failure (as defined in errno.h) - */ +/* et131x_init_recv - Initialize receive data structures */ static int et131x_init_recv(struct et131x_adapter *adapter) { struct rfd *rfd; u32 rfdct; - u32 numrfd = 0; - struct rx_ring *rx_ring; - - /* Setup some convenience pointers */ - rx_ring = &adapter->rx_ring; + struct rx_ring *rx_ring = &adapter->rx_ring; /* Setup each RFD */ for (rfdct = 0; rfdct < rx_ring->num_rfd; rfdct++) { @@ -2467,24 +2364,18 @@ static int et131x_init_recv(struct et131x_adapter *adapter) /* Add this RFD to the recv_list */ list_add_tail(&rfd->list_node, &rx_ring->recv_list); - /* Increment both the available RFD's, and the total RFD's. */ + /* Increment the available RFD's */ rx_ring->num_ready_recv++; - numrfd++; } return 0; } -/* et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate. - * @adapter: pointer to our adapter structure - */ +/* et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate */ static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter) { struct phy_device *phydev = adapter->phydev; - if (!phydev) - return; - /* For version B silicon, we do not use the RxDMA timer for 10 and 100 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. */ @@ -2505,11 +2396,13 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) u16 buff_index = rfd->bufferindex; u8 ring_index = rfd->ringindex; unsigned long flags; + struct fbr_lookup *fbr = rx_local->fbr[ring_index]; /* We don't use any of the OOB data besides status. Otherwise, we * need to clean up OOB data */ - if (buff_index < rx_local->fbr[ring_index]->num_entries) { + if (buff_index < fbr->num_entries) { + u32 free_buff_ring; u32 __iomem *offset; struct fbr_desc *next; @@ -2520,22 +2413,20 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) else offset = &rx_dma->fbr1_full_offset; - next = (struct fbr_desc *) - (rx_local->fbr[ring_index]->ring_virtaddr) + - INDEX10(rx_local->fbr[ring_index]->local_full); + next = (struct fbr_desc *)(fbr->ring_virtaddr) + + INDEX10(fbr->local_full); /* Handle the Free Buffer Ring advancement here. Write * the PA / Buffer Index for the returned buffer into * the oldest (next to be freed)FBR entry */ - next->addr_hi = rx_local->fbr[ring_index]->bus_high[buff_index]; - next->addr_lo = rx_local->fbr[ring_index]->bus_low[buff_index]; + next->addr_hi = fbr->bus_high[buff_index]; + next->addr_lo = fbr->bus_low[buff_index]; next->word2 = buff_index; - writel(bump_free_buff_ring( - &rx_local->fbr[ring_index]->local_full, - rx_local->fbr[ring_index]->num_entries - 1), - offset); + free_buff_ring = bump_free_buff_ring(&fbr->local_full, + fbr->num_entries - 1); + writel(free_buff_ring, offset); spin_unlock_irqrestore(&adapter->fbr_lock, flags); } else { @@ -2555,7 +2446,6 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) } /* nic_rx_pkts - Checks the hardware for available packets - * @adapter: pointer to our adapter * * Returns rfd, a pointer to our MPRFD. * @@ -2580,6 +2470,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) u32 word0; u32 word1; struct sk_buff *skb; + struct fbr_lookup *fbr; /* RX Status block is written by the DMA engine prior to every * interrupt. It contains the next to be used entry in the Packet @@ -2601,6 +2492,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) */ len = psr->word1 & 0xFFFF; ring_index = (psr->word1 >> 26) & 0x03; + fbr = rx_local->fbr[ring_index]; buff_index = (psr->word1 >> 16) & 0x3FF; word0 = psr->word0; @@ -2616,8 +2508,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) writel(rx_local->local_psr_full, &adapter->regs->rxdma.psr_full_offset); - if (ring_index > 1 || - buff_index > rx_local->fbr[ring_index]->num_entries - 1) { + if (ring_index > 1 || buff_index > fbr->num_entries - 1) { /* Illegal buffer or ring index cannot be used by S/W*/ dev_err(&adapter->pdev->dev, "NICRxPkts PSR Entry %d indicates length of %d and/or bad bi(%d)\n", @@ -2629,7 +2520,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) spin_lock_irqsave(&adapter->rcv_lock, flags); element = rx_local->recv_list.next; - rfd = (struct rfd *) list_entry(element, struct rfd, list_node); + rfd = list_entry(element, struct rfd, list_node); if (!rfd) { spin_unlock_irqrestore(&adapter->rcv_lock, flags); @@ -2670,7 +2561,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) && !(adapter->packet_filter & ET131X_PACKET_TYPE_PROMISCUOUS) && !(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { - buf = rx_local->fbr[ring_index]->virt[buff_index]; + buf = fbr->virt[buff_index]; /* Loop through our list to see if the destination * address of this packet matches one in our list. @@ -2708,7 +2599,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) adapter->stats.unicast_pkts_rcvd++; } - if (len == 0) { + if (!len) { rfd->len = 0; goto out; } @@ -2723,9 +2614,7 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) adapter->net_stats.rx_bytes += rfd->len; - memcpy(skb_put(skb, rfd->len), - rx_local->fbr[ring_index]->virt[buff_index], - rfd->len); + memcpy(skb_put(skb, rfd->len), fbr->virt[buff_index], rfd->len); skb->protocol = eth_type_trans(skb, adapter->netdev); skb->ip_summed = CHECKSUM_NONE; @@ -2737,7 +2626,6 @@ out: } /* et131x_handle_recv_interrupt - Interrupt handler for receive processing - * @adapter: pointer to our adapter * * Assumption, Rcv spinlock has been acquired. */ @@ -2746,11 +2634,12 @@ static void et131x_handle_recv_interrupt(struct et131x_adapter *adapter) struct rfd *rfd = NULL; u32 count = 0; bool done = true; + struct rx_ring *rx_ring = &adapter->rx_ring; /* Process up to available RFD's */ while (count < NUM_PACKETS_HANDLED) { - if (list_empty(&adapter->rx_ring.recv_list)) { - WARN_ON(adapter->rx_ring.num_ready_recv != 0); + if (list_empty(&rx_ring->recv_list)) { + WARN_ON(rx_ring->num_ready_recv != 0); done = false; break; } @@ -2774,25 +2663,22 @@ static void et131x_handle_recv_interrupt(struct et131x_adapter *adapter) adapter->net_stats.rx_packets++; /* Set the status on the packet, either resources or success */ - if (adapter->rx_ring.num_ready_recv < RFD_LOW_WATER_MARK) + if (rx_ring->num_ready_recv < RFD_LOW_WATER_MARK) dev_warn(&adapter->pdev->dev, "RFD's are running out\n"); count++; } if (count == NUM_PACKETS_HANDLED || !done) { - adapter->rx_ring.unfinished_receives = true; + rx_ring->unfinished_receives = true; writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, &adapter->regs->global.watchdog_timer); } else /* Watchdog timer will disable itself if appropriate. */ - adapter->rx_ring.unfinished_receives = false; + rx_ring->unfinished_receives = false; } /* et131x_tx_dma_memory_alloc - * @adapter: pointer to our private adapter structure - * - * Returns 0 on success and errno on failure (as defined in errno.h). * * Allocates memory that will be visible both to the device and to the CPU. * The OS will pass us packets, pointers to which we will insert in the Tx @@ -2806,18 +2692,17 @@ static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) struct tx_ring *tx_ring = &adapter->tx_ring; /* Allocate memory for the TCB's (Transmit Control Block) */ - adapter->tx_ring.tcb_ring = kcalloc(NUM_TCB, sizeof(struct tcb), - GFP_ATOMIC | GFP_DMA); - if (!adapter->tx_ring.tcb_ring) + tx_ring->tcb_ring = kcalloc(NUM_TCB, sizeof(struct tcb), + GFP_ATOMIC | GFP_DMA); + if (!tx_ring->tcb_ring) return -ENOMEM; desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); - tx_ring->tx_desc_ring = - (struct tx_desc *) dma_alloc_coherent(&adapter->pdev->dev, - desc_size, - &tx_ring->tx_desc_ring_pa, - GFP_KERNEL); - if (!adapter->tx_ring.tx_desc_ring) { + tx_ring->tx_desc_ring = dma_alloc_coherent(&adapter->pdev->dev, + desc_size, + &tx_ring->tx_desc_ring_pa, + GFP_KERNEL); + if (!tx_ring->tx_desc_ring) { dev_err(&adapter->pdev->dev, "Cannot alloc memory for Tx Ring\n"); return -ENOMEM; @@ -2835,51 +2720,46 @@ static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) sizeof(u32), &tx_ring->tx_status_pa, GFP_KERNEL); - if (!adapter->tx_ring.tx_status_pa) { + if (!tx_ring->tx_status_pa) { dev_err(&adapter->pdev->dev, - "Cannot alloc memory for Tx status block\n"); + "Cannot alloc memory for Tx status block\n"); return -ENOMEM; } return 0; } -/* et131x_tx_dma_memory_free - Free all memory allocated within this module - * @adapter: pointer to our private adapter structure - * - * Returns 0 on success and errno on failure (as defined in errno.h). - */ +/* et131x_tx_dma_memory_free - Free all memory allocated within this module */ static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) { int desc_size = 0; + struct tx_ring *tx_ring = &adapter->tx_ring; - if (adapter->tx_ring.tx_desc_ring) { + if (tx_ring->tx_desc_ring) { /* Free memory relating to Tx rings here */ desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); dma_free_coherent(&adapter->pdev->dev, - desc_size, - adapter->tx_ring.tx_desc_ring, - adapter->tx_ring.tx_desc_ring_pa); - adapter->tx_ring.tx_desc_ring = NULL; + desc_size, + tx_ring->tx_desc_ring, + tx_ring->tx_desc_ring_pa); + tx_ring->tx_desc_ring = NULL; } /* Free memory for the Tx status block */ - if (adapter->tx_ring.tx_status) { + if (tx_ring->tx_status) { dma_free_coherent(&adapter->pdev->dev, - sizeof(u32), - adapter->tx_ring.tx_status, - adapter->tx_ring.tx_status_pa); + sizeof(u32), + tx_ring->tx_status, + tx_ring->tx_status_pa); - adapter->tx_ring.tx_status = NULL; + tx_ring->tx_status = NULL; } /* Free the memory for the tcb structures */ - kfree(adapter->tx_ring.tcb_ring); + kfree(tx_ring->tcb_ring); } /* nic_send_packet - NIC specific send handler for version B silicon. * @adapter: pointer to our adapter * @tcb: pointer to struct tcb - * - * Returns 0 or errno. */ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) { @@ -2893,6 +2773,7 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) unsigned long flags; struct phy_device *phydev = adapter->phydev; dma_addr_t dma_addr; + struct tx_ring *tx_ring = &adapter->tx_ring; /* Part of the optimizations of this send routine restrict us to * sending 24 fragments at a pass. In practice we should never see @@ -2968,11 +2849,11 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) } if (phydev && phydev->speed == SPEED_1000) { - if (++adapter->tx_ring.since_irq == PARM_TX_NUM_BUFS_DEF) { + if (++tx_ring->since_irq == PARM_TX_NUM_BUFS_DEF) { /* Last element & Interrupt flag */ desc[frag - 1].flags = TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; - adapter->tx_ring.since_irq = 0; + tx_ring->since_irq = 0; } else { /* Last element */ desc[frag - 1].flags = TXDESC_FLAG_LASTPKT; } @@ -2982,12 +2863,12 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) desc[0].flags |= TXDESC_FLAG_FIRSTPKT; - tcb->index_start = adapter->tx_ring.send_idx; + tcb->index_start = tx_ring->send_idx; tcb->stale = 0; spin_lock_irqsave(&adapter->send_hw_lock, flags); - thiscopy = NUM_DESC_PER_RING_TX - INDEX10(adapter->tx_ring.send_idx); + thiscopy = NUM_DESC_PER_RING_TX - INDEX10(tx_ring->send_idx); if (thiscopy >= frag) { remainder = 0; @@ -2996,52 +2877,51 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) remainder = frag - thiscopy; } - memcpy(adapter->tx_ring.tx_desc_ring + - INDEX10(adapter->tx_ring.send_idx), desc, + memcpy(tx_ring->tx_desc_ring + INDEX10(tx_ring->send_idx), + desc, sizeof(struct tx_desc) * thiscopy); - add_10bit(&adapter->tx_ring.send_idx, thiscopy); + add_10bit(&tx_ring->send_idx, thiscopy); - if (INDEX10(adapter->tx_ring.send_idx) == 0 || - INDEX10(adapter->tx_ring.send_idx) == NUM_DESC_PER_RING_TX) { - adapter->tx_ring.send_idx &= ~ET_DMA10_MASK; - adapter->tx_ring.send_idx ^= ET_DMA10_WRAP; + if (INDEX10(tx_ring->send_idx) == 0 || + INDEX10(tx_ring->send_idx) == NUM_DESC_PER_RING_TX) { + tx_ring->send_idx &= ~ET_DMA10_MASK; + tx_ring->send_idx ^= ET_DMA10_WRAP; } if (remainder) { - memcpy(adapter->tx_ring.tx_desc_ring, + memcpy(tx_ring->tx_desc_ring, desc + thiscopy, sizeof(struct tx_desc) * remainder); - add_10bit(&adapter->tx_ring.send_idx, remainder); + add_10bit(&tx_ring->send_idx, remainder); } - if (INDEX10(adapter->tx_ring.send_idx) == 0) { - if (adapter->tx_ring.send_idx) + if (INDEX10(tx_ring->send_idx) == 0) { + if (tx_ring->send_idx) tcb->index = NUM_DESC_PER_RING_TX - 1; else tcb->index = ET_DMA10_WRAP|(NUM_DESC_PER_RING_TX - 1); } else - tcb->index = adapter->tx_ring.send_idx - 1; + tcb->index = tx_ring->send_idx - 1; spin_lock(&adapter->tcb_send_qlock); - if (adapter->tx_ring.send_tail) - adapter->tx_ring.send_tail->next = tcb; + if (tx_ring->send_tail) + tx_ring->send_tail->next = tcb; else - adapter->tx_ring.send_head = tcb; + tx_ring->send_head = tcb; - adapter->tx_ring.send_tail = tcb; + tx_ring->send_tail = tcb; WARN_ON(tcb->next != NULL); - adapter->tx_ring.used++; + tx_ring->used++; spin_unlock(&adapter->tcb_send_qlock); /* Write the new write pointer back to the device. */ - writel(adapter->tx_ring.send_idx, - &adapter->regs->txdma.service_request); + writel(tx_ring->send_idx, &adapter->regs->txdma.service_request); /* For Gig only, we use Tx Interrupt coalescing. Enable the software * timer to wake us up if this packet isn't followed by N more. @@ -3056,19 +2936,16 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) } /* send_packet - Do the work to send a packet - * @skb: the packet(s) to send - * @adapter: a pointer to the device's private adapter structure - * - * Return 0 in almost all cases; non-zero value in extreme hard failure only. * * Assumption: Send spinlock has been acquired */ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) { int status; - struct tcb *tcb = NULL; + struct tcb *tcb; u16 *shbufva; unsigned long flags; + struct tx_ring *tx_ring = &adapter->tx_ring; /* All packets must have at least a MAC address and a protocol type */ if (skb->len < ETH_HLEN) @@ -3077,17 +2954,17 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) /* Get a TCB for this packet */ spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - tcb = adapter->tx_ring.tcb_qhead; + tcb = tx_ring->tcb_qhead; if (tcb == NULL) { spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); return -ENOMEM; } - adapter->tx_ring.tcb_qhead = tcb->next; + tx_ring->tcb_qhead = tcb->next; - if (adapter->tx_ring.tcb_qhead == NULL) - adapter->tx_ring.tcb_qtail = NULL; + if (tx_ring->tcb_qhead == NULL) + tx_ring->tcb_qtail = NULL; spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); @@ -3111,30 +2988,26 @@ static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) if (status != 0) { spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); - if (adapter->tx_ring.tcb_qtail) - adapter->tx_ring.tcb_qtail->next = tcb; + if (tx_ring->tcb_qtail) + tx_ring->tcb_qtail->next = tcb; else /* Apparently ready Q is empty. */ - adapter->tx_ring.tcb_qhead = tcb; + tx_ring->tcb_qhead = tcb; - adapter->tx_ring.tcb_qtail = tcb; + tx_ring->tcb_qtail = tcb; spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); return status; } - WARN_ON(adapter->tx_ring.used > NUM_TCB); + WARN_ON(tx_ring->used > NUM_TCB); return 0; } -/* et131x_send_packets - This function is called by the OS to send packets - * @skb: the packet(s) to send - * @netdev:device on which to TX the above packet(s) - * - * Return 0 in almost all cases; non-zero value in extreme hard failure only - */ +/* et131x_send_packets - This function is called by the OS to send packets */ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) { int status = 0; struct et131x_adapter *adapter = netdev_priv(netdev); + struct tx_ring *tx_ring = &adapter->tx_ring; /* Send these packets * @@ -3143,7 +3016,7 @@ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev) */ /* TCB is not available */ - if (adapter->tx_ring.used >= NUM_TCB) { + if (tx_ring->used >= NUM_TCB) { /* NOTE: If there's an error on send, no need to queue the * packet under Linux; if we just send an error up to the * netif layer, it will resend the skb to us. @@ -3187,6 +3060,7 @@ static inline void free_send_packet(struct et131x_adapter *adapter, unsigned long flags; struct tx_desc *desc = NULL; struct net_device_stats *stats = &adapter->net_stats; + struct tx_ring *tx_ring = &adapter->tx_ring; u64 dma_addr; if (tcb->flags & FMP_DEST_BROAD) @@ -3204,9 +3078,8 @@ static inline void free_send_packet(struct et131x_adapter *adapter, * they point to */ do { - desc = (struct tx_desc *) - (adapter->tx_ring.tx_desc_ring + - INDEX10(tcb->index_start)); + desc = tx_ring->tx_desc_ring + + INDEX10(tcb->index_start); dma_addr = desc->addr_lo; dma_addr |= (u64)desc->addr_hi << 32; @@ -3221,8 +3094,7 @@ static inline void free_send_packet(struct et131x_adapter *adapter, tcb->index_start &= ~ET_DMA10_MASK; tcb->index_start ^= ET_DMA10_WRAP; } - } while (desc != (adapter->tx_ring.tx_desc_ring + - INDEX10(tcb->index))); + } while (desc != tx_ring->tx_desc_ring + INDEX10(tcb->index)); dev_kfree_skb_any(tcb->skb); } @@ -3234,20 +3106,19 @@ static inline void free_send_packet(struct et131x_adapter *adapter, adapter->net_stats.tx_packets++; - if (adapter->tx_ring.tcb_qtail) - adapter->tx_ring.tcb_qtail->next = tcb; + if (tx_ring->tcb_qtail) + tx_ring->tcb_qtail->next = tcb; else /* Apparently ready Q is empty. */ - adapter->tx_ring.tcb_qhead = tcb; + tx_ring->tcb_qhead = tcb; - adapter->tx_ring.tcb_qtail = tcb; + tx_ring->tcb_qtail = tcb; spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); - WARN_ON(adapter->tx_ring.used < 0); + WARN_ON(tx_ring->used < 0); } /* et131x_free_busy_send_packets - Free and complete the stopped active sends - * @adapter: pointer to our adapter * * Assumption - Send spinlock has been acquired */ @@ -3256,21 +3127,22 @@ static void et131x_free_busy_send_packets(struct et131x_adapter *adapter) struct tcb *tcb; unsigned long flags; u32 freed = 0; + struct tx_ring *tx_ring = &adapter->tx_ring; /* Any packets being sent? Check the first TCB on the send list */ spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = adapter->tx_ring.send_head; + tcb = tx_ring->send_head; while (tcb != NULL && freed < NUM_TCB) { struct tcb *next = tcb->next; - adapter->tx_ring.send_head = next; + tx_ring->send_head = next; if (next == NULL) - adapter->tx_ring.send_tail = NULL; + tx_ring->send_tail = NULL; - adapter->tx_ring.used--; + tx_ring->used--; spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); @@ -3279,18 +3151,17 @@ static void et131x_free_busy_send_packets(struct et131x_adapter *adapter) spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = adapter->tx_ring.send_head; + tcb = tx_ring->send_head; } WARN_ON(freed == NUM_TCB); spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); - adapter->tx_ring.used = 0; + tx_ring->used = 0; } /* et131x_handle_send_interrupt - Interrupt handler for sending processing - * @adapter: pointer to our adapter * * Re-claim the send resources, complete sends and get more to send from * the send wait queue. @@ -3303,6 +3174,7 @@ static void et131x_handle_send_interrupt(struct et131x_adapter *adapter) u32 serviced; struct tcb *tcb; u32 index; + struct tx_ring *tx_ring = &adapter->tx_ring; serviced = readl(&adapter->regs->txdma.new_service_complete); index = INDEX10(serviced); @@ -3312,41 +3184,41 @@ static void et131x_handle_send_interrupt(struct et131x_adapter *adapter) */ spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = adapter->tx_ring.send_head; + tcb = tx_ring->send_head; while (tcb && ((serviced ^ tcb->index) & ET_DMA10_WRAP) && index < INDEX10(tcb->index)) { - adapter->tx_ring.used--; - adapter->tx_ring.send_head = tcb->next; + tx_ring->used--; + tx_ring->send_head = tcb->next; if (tcb->next == NULL) - adapter->tx_ring.send_tail = NULL; + tx_ring->send_tail = NULL; spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); free_send_packet(adapter, tcb); spin_lock_irqsave(&adapter->tcb_send_qlock, flags); /* Goto the next packet */ - tcb = adapter->tx_ring.send_head; + tcb = tx_ring->send_head; } while (tcb && !((serviced ^ tcb->index) & ET_DMA10_WRAP) && index > (tcb->index & ET_DMA10_MASK)) { - adapter->tx_ring.used--; - adapter->tx_ring.send_head = tcb->next; + tx_ring->used--; + tx_ring->send_head = tcb->next; if (tcb->next == NULL) - adapter->tx_ring.send_tail = NULL; + tx_ring->send_tail = NULL; spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); free_send_packet(adapter, tcb); spin_lock_irqsave(&adapter->tcb_send_qlock, flags); /* Goto the next packet */ - tcb = adapter->tx_ring.send_head; + tcb = tx_ring->send_head; } /* Wake up the queue when we hit a low-water mark */ - if (adapter->tx_ring.used <= NUM_TCB / 3) + if (tx_ring->used <= NUM_TCB / 3) netif_wake_queue(adapter->netdev); spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); @@ -3548,9 +3420,7 @@ static struct ethtool_ops et131x_ethtool_ops = { .get_link = ethtool_op_get_link, }; -/* et131x_hwaddr_init - set up the MAC Address on the ET1310 - * @adapter: pointer to our private adapter structure - */ +/* et131x_hwaddr_init - set up the MAC Address on the ET1310 */ static void et131x_hwaddr_init(struct et131x_adapter *adapter) { /* If have our default mac from init and no mac address from @@ -3580,14 +3450,12 @@ static void et131x_hwaddr_init(struct et131x_adapter *adapter) } /* et131x_pci_init - initial PCI setup - * @adapter: pointer to our private adapter structure - * @pdev: our PCI device * * Perform the initial setup of PCI registers and if possible initialise * the MAC address. At this point the I/O registers have yet to be mapped */ static int et131x_pci_init(struct et131x_adapter *adapter, - struct pci_dev *pdev) + struct pci_dev *pdev) { u16 max_payload; int i, rc; @@ -3704,21 +3572,14 @@ static void et131x_error_timer_handler(unsigned long data) mod_timer(&adapter->error_timer, jiffies + TX_ERROR_PERIOD * HZ / 1000); } -/* et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx - * @adapter: pointer to our private adapter structure - */ +/* et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx */ static void et131x_adapter_memory_free(struct et131x_adapter *adapter) { - /* Free DMA memory */ et131x_tx_dma_memory_free(adapter); et131x_rx_dma_memory_free(adapter); } /* et131x_adapter_memory_alloc - * @adapter: pointer to our private adapter structure - * - * Returns 0 on success, errno on failure (as defined in errno.h). - * * Allocate all the memory blocks for send, receive and others. */ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) @@ -3727,14 +3588,14 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) /* Allocate memory for the Tx Ring */ status = et131x_tx_dma_memory_alloc(adapter); - if (status != 0) { + if (status) { dev_err(&adapter->pdev->dev, "et131x_tx_dma_memory_alloc FAILED\n"); return status; } /* Receive buffer memory allocation */ status = et131x_rx_dma_memory_alloc(adapter); - if (status != 0) { + if (status) { dev_err(&adapter->pdev->dev, "et131x_rx_dma_memory_alloc FAILED\n"); et131x_tx_dma_memory_free(adapter); @@ -3744,8 +3605,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) /* Init receive data structures */ status = et131x_init_recv(adapter); if (status) { - dev_err(&adapter->pdev->dev, - "et131x_init_recv FAILED\n"); + dev_err(&adapter->pdev->dev, "et131x_init_recv FAILED\n"); et131x_adapter_memory_free(adapter); } return status; @@ -3756,97 +3616,89 @@ static void et131x_adjust_link(struct net_device *netdev) struct et131x_adapter *adapter = netdev_priv(netdev); struct phy_device *phydev = adapter->phydev; - if (phydev && phydev->link != adapter->link) { - /* Check to see if we are in coma mode and if - * so, disable it because we will not be able - * to read PHY values until we are out. - */ - if (et1310_in_phy_coma(adapter)) - et1310_disable_phy_coma(adapter); - - adapter->link = phydev->link; - phy_print_status(phydev); - - if (phydev->link) { - adapter->boot_coma = 20; - if (phydev && phydev->speed == SPEED_10) { - /* NOTE - Is there a way to query this without - * TruePHY? - * && TRU_QueryCoreType(adapter->hTruePhy, 0)== - * EMI_TRUEPHY_A13O) { - */ - u16 register18; - - et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, - ®ister18); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18 | 0x4); - et131x_mii_write(adapter, PHY_INDEX_REG, - register18 | 0x8402); - et131x_mii_write(adapter, PHY_DATA_REG, - register18 | 511); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18); - } + if (!phydev) + return; + if (phydev->link == adapter->link) + return; - et1310_config_flow_control(adapter); + /* Check to see if we are in coma mode and if + * so, disable it because we will not be able + * to read PHY values until we are out. + */ + if (et1310_in_phy_coma(adapter)) + et1310_disable_phy_coma(adapter); - if (phydev && phydev->speed == SPEED_1000 && - adapter->registry_jumbo_packet > 2048) { - u16 reg; + adapter->link = phydev->link; + phy_print_status(phydev); - et131x_mii_read(adapter, PHY_CONFIG, ®); - reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH; - reg |= ET_PHY_CONFIG_FIFO_DEPTH_32; - et131x_mii_write(adapter, PHY_CONFIG, reg); - } + if (phydev->link) { + adapter->boot_coma = 20; + if (phydev->speed == SPEED_10) { + u16 register18; + + et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, + ®ister18); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, + register18 | 0x4); + et131x_mii_write(adapter, PHY_INDEX_REG, + register18 | 0x8402); + et131x_mii_write(adapter, PHY_DATA_REG, + register18 | 511); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, + register18); + } - et131x_set_rx_dma_timer(adapter); - et1310_config_mac_regs2(adapter); - } else { - adapter->boot_coma = 0; + et1310_config_flow_control(adapter); - if (phydev->speed == SPEED_10) { - /* NOTE - Is there a way to query this without - * TruePHY? - * && TRU_QueryCoreType(adapter->hTruePhy, 0) == - * EMI_TRUEPHY_A13O) - */ - u16 register18; - - et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, - ®ister18); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18 | 0x4); - et131x_mii_write(adapter, PHY_INDEX_REG, - register18 | 0x8402); - et131x_mii_write(adapter, PHY_DATA_REG, - register18 | 511); - et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, - register18); - } + if (phydev->speed == SPEED_1000 && + adapter->registry_jumbo_packet > 2048) { + u16 reg; - /* Free the packets being actively sent & stopped */ - et131x_free_busy_send_packets(adapter); + et131x_mii_read(adapter, PHY_CONFIG, ®); + reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH; + reg |= ET_PHY_CONFIG_FIFO_DEPTH_32; + et131x_mii_write(adapter, PHY_CONFIG, reg); + } - /* Re-initialize the send structures */ - et131x_init_send(adapter); + et131x_set_rx_dma_timer(adapter); + et1310_config_mac_regs2(adapter); + } else { + adapter->boot_coma = 0; + + if (phydev->speed == SPEED_10) { + u16 register18; + + et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, + ®ister18); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, + register18 | 0x4); + et131x_mii_write(adapter, PHY_INDEX_REG, + register18 | 0x8402); + et131x_mii_write(adapter, PHY_DATA_REG, + register18 | 511); + et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG, + register18); + } - /* Bring the device back to the state it was during - * init prior to autonegotiation being complete. This - * way, when we get the auto-neg complete interrupt, - * we can complete init by calling config_mac_regs2. - */ - et131x_soft_reset(adapter); + /* Free the packets being actively sent & stopped */ + et131x_free_busy_send_packets(adapter); - /* Setup ET1310 as per the documentation */ - et131x_adapter_setup(adapter); + /* Re-initialize the send structures */ + et131x_init_send(adapter); - /* perform reset of tx/rx */ - et131x_disable_txrx(netdev); - et131x_enable_txrx(netdev); - } + /* Bring the device back to the state it was during + * init prior to autonegotiation being complete. This + * way, when we get the auto-neg complete interrupt, + * we can complete init by calling config_mac_regs2. + */ + et131x_soft_reset(adapter); + + /* Setup ET1310 as per the documentation */ + et131x_adapter_setup(adapter); + /* perform reset of tx/rx */ + et131x_disable_txrx(netdev); + et131x_enable_txrx(netdev); } } @@ -3883,21 +3735,20 @@ static int et131x_mii_probe(struct net_device *netdev) phydev->advertising = phydev->supported; adapter->phydev = phydev; - dev_info(&adapter->pdev->dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", + dev_info(&adapter->pdev->dev, + "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", phydev->drv->name, dev_name(&phydev->dev)); return 0; } /* et131x_adapter_init - * @adapter: pointer to the private adapter struct - * @pdev: pointer to the PCI device * * Initialize the data structures for the et131x_adapter object and link * them together with the platform provided device structures. */ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, - struct pci_dev *pdev) + struct pci_dev *pdev) { static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }; @@ -3925,7 +3776,6 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, } /* et131x_pci_remove - * @pdev: a pointer to the device's pci_dev structure * * Registered in the pci_driver structure, this function is called when the * PCI subsystem detects that a PCI device which matches the information @@ -3952,9 +3802,7 @@ static void et131x_pci_remove(struct pci_dev *pdev) pci_disable_device(pdev); } -/* et131x_up - Bring up a device for use. - * @netdev: device to be opened - */ +/* et131x_up - Bring up a device for use. */ static void et131x_up(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -3963,9 +3811,7 @@ static void et131x_up(struct net_device *netdev) phy_start(adapter->phydev); } -/* et131x_down - Bring down the device - * @netdev: device to be brought down - */ +/* et131x_down - Bring down the device */ static void et131x_down(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4022,7 +3868,9 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) { bool handled = true; struct net_device *netdev = (struct net_device *)dev_id; - struct et131x_adapter *adapter = NULL; + struct et131x_adapter *adapter = netdev_priv(netdev); + struct rx_ring *rx_ring = &adapter->rx_ring; + struct tx_ring *tx_ring = &adapter->tx_ring; u32 status; if (!netif_device_present(netdev)) { @@ -4030,8 +3878,6 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) goto out; } - adapter = netdev_priv(netdev); - /* If the adapter is in low power state, then it should not * recognize any interrupt */ @@ -4061,13 +3907,13 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) /* This is our interrupt, so process accordingly */ if (status & ET_INTR_WATCHDOG) { - struct tcb *tcb = adapter->tx_ring.send_head; + struct tcb *tcb = tx_ring->send_head; if (tcb) if (++tcb->stale > 1) status |= ET_INTR_TXDMA_ISR; - if (adapter->rx_ring.unfinished_receives) + if (rx_ring->unfinished_receives) status |= ET_INTR_RXDMA_XFR_DONE; else if (tcb == NULL) writel(0, &adapter->regs->global.watchdog_timer); @@ -4075,7 +3921,7 @@ static irqreturn_t et131x_isr(int irq, void *dev_id) status &= ~ET_INTR_WATCHDOG; } - if (status == 0) { + if (!status) { /* This interrupt has in some way been "handled" by * the ISR. Either it was a spurious Rx interrupt, or * it was a Tx interrupt that has been filtered by @@ -4101,7 +3947,6 @@ out: } /* et131x_isr_handler - The ISR handler - * @p_adapter, a pointer to the device's private adapter structure * * scheduled to run in a deferred context by the ISR. This is where the ISR's * work actually gets done. @@ -4125,17 +3970,15 @@ static void et131x_isr_handler(struct work_struct *work) if (status & ET_INTR_RXDMA_XFR_DONE) et131x_handle_recv_interrupt(adapter); - status &= 0xffffffd7; + status &= ~(ET_INTR_TXDMA_ERR | ET_INTR_RXDMA_XFR_DONE); if (!status) goto out; /* Handle the TXDMA Error interrupt */ if (status & ET_INTR_TXDMA_ERR) { - u32 txdma_err; - /* Following read also clears the register (COR) */ - txdma_err = readl(&iomem->txdma.tx_dma_error); + u32 txdma_err = readl(&iomem->txdma.tx_dma_error); dev_warn(&adapter->pdev->dev, "TXDMA_ERR interrupt, error = %d\n", @@ -4281,11 +4124,7 @@ out: et131x_enable_interrupts(adapter); } -/* et131x_stats - Return the current device statistics. - * @netdev: device whose stats are being queried - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ +/* et131x_stats - Return the current device statistics */ static struct net_device_stats *et131x_stats(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4327,11 +4166,7 @@ static struct net_device_stats *et131x_stats(struct net_device *netdev) return stats; } -/* et131x_open - Open the device for use. - * @netdev: device to be opened - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ +/* et131x_open - Open the device for use. */ static int et131x_open(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4360,11 +4195,7 @@ static int et131x_open(struct net_device *netdev) return result; } -/* et131x_close - Close the device - * @netdev: device to be closed - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ +/* et131x_close - Close the device */ static int et131x_close(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4382,8 +4213,6 @@ static int et131x_close(struct net_device *netdev) * @netdev: device on which the control request is being made * @reqbuf: a pointer to the IOCTL request buffer * @cmd: the IOCTL command code - * - * Returns 0 on success, errno on failure (as defined in errno.h) */ static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd) @@ -4400,8 +4229,6 @@ static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, * @adapter: pointer to our private adapter structure * * FIXME: lot of dups with MAC code - * - * Returns 0 on success, errno on failure */ static int et131x_set_packet_filter(struct et131x_adapter *adapter) { @@ -4460,9 +4287,7 @@ static int et131x_set_packet_filter(struct et131x_adapter *adapter) return status; } -/* et131x_multicast - The handler to configure multicasting on the interface - * @netdev: a pointer to a net_device struct representing the device - */ +/* et131x_multicast - The handler to configure multicasting on the interface */ static void et131x_multicast(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); @@ -4522,27 +4347,21 @@ static void et131x_multicast(struct net_device *netdev) * NOTE - This block will always update the multicast_list with the * hardware, even if the addresses aren't the same. */ - if (packet_filter != adapter->packet_filter) { - /* Call the device's filter function */ + if (packet_filter != adapter->packet_filter) et131x_set_packet_filter(adapter); - } + spin_unlock_irqrestore(&adapter->lock, flags); } -/* et131x_tx - The handler to tx a packet on the device - * @skb: data to be Tx'd - * @netdev: device on which data is to be Tx'd - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ +/* et131x_tx - The handler to tx a packet on the device */ static int et131x_tx(struct sk_buff *skb, struct net_device *netdev) { int status = 0; struct et131x_adapter *adapter = netdev_priv(netdev); + struct tx_ring *tx_ring = &adapter->tx_ring; /* stop the queue if it's getting full */ - if (adapter->tx_ring.used >= NUM_TCB - 1 && - !netif_queue_stopped(netdev)) + if (tx_ring->used >= NUM_TCB - 1 && !netif_queue_stopped(netdev)) netif_stop_queue(netdev); /* Save the timestamp for the TX timeout watchdog */ @@ -4562,7 +4381,6 @@ static int et131x_tx(struct sk_buff *skb, struct net_device *netdev) } /* et131x_tx_timeout - Timeout handler - * @netdev: a pointer to a net_device struct representing the device * * The handler called when a Tx request times out. The timeout period is * specified by the 'tx_timeo" element in the net_device structure (see @@ -4571,6 +4389,7 @@ static int et131x_tx(struct sk_buff *skb, struct net_device *netdev) static void et131x_tx_timeout(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); + struct tx_ring *tx_ring = &adapter->tx_ring; struct tcb *tcb; unsigned long flags; @@ -4593,7 +4412,7 @@ static void et131x_tx_timeout(struct net_device *netdev) /* Is send stuck? */ spin_lock_irqsave(&adapter->tcb_send_qlock, flags); - tcb = adapter->tx_ring.send_head; + tcb = tx_ring->send_head; if (tcb != NULL) { tcb->count++; @@ -4619,12 +4438,7 @@ static void et131x_tx_timeout(struct net_device *netdev) spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); } -/* et131x_change_mtu - The handler called to change the MTU for the device - * @netdev: device whose MTU is to be changed - * @new_mtu: the desired MTU - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ +/* et131x_change_mtu - The handler called to change the MTU for the device */ static int et131x_change_mtu(struct net_device *netdev, int new_mtu) { int result = 0; @@ -4669,22 +4483,13 @@ static int et131x_change_mtu(struct net_device *netdev, int new_mtu) return result; } -/* et131x_set_mac_addr - handler to change the MAC address for the device - * @netdev: device whose MAC is to be changed - * @new_mac: the desired MAC address - * - * Returns 0 on success, errno on failure (as defined in errno.h) - * - * IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14 - */ +/* et131x_set_mac_addr - handler to change the MAC address for the device */ static int et131x_set_mac_addr(struct net_device *netdev, void *new_mac) { int result = 0; struct et131x_adapter *adapter = netdev_priv(netdev); struct sockaddr *address = new_mac; - /* begin blux */ - if (adapter == NULL) return -ENODEV; @@ -4746,15 +4551,13 @@ static const struct net_device_ops et131x_netdev_ops = { * @pdev: a pointer to the device's pci_dev structure * @ent: this device's entry in the pci_device_id table * - * Returns 0 on success, errno on failure (as defined in errno.h) - * * Registered in the pci_driver structure, this function is called when the * PCI subsystem finds a new PCI device which matches the information * contained in the pci_device_id table. This routine is the equivalent to * a device insertion routine. */ static int et131x_pci_setup(struct pci_dev *pdev, - const struct pci_device_id *ent) + const struct pci_device_id *ent) { struct net_device *netdev; struct et131x_adapter *adapter; @@ -4930,7 +4733,7 @@ err_disable: goto out; } -static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = { +static const struct pci_device_id et131x_pci_table[] = { { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL}, { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL}, {0,} diff --git a/drivers/staging/et131x/et131x.h b/drivers/staging/et131x/et131x.h index bbe78a703a2..2ac6e998011 100644 --- a/drivers/staging/et131x/et131x.h +++ b/drivers/staging/et131x/et131x.h @@ -1668,43 +1668,3 @@ struct address_map { #define LED_100TX_SHIFT 4 /* MI Register 29 - 31: Reserved Reg(0x1D - 0x1E) */ - -/* Defines for PHY access routines */ - -/* Define bit operation flags */ -#define TRUEPHY_BIT_CLEAR 0 -#define TRUEPHY_BIT_SET 1 -#define TRUEPHY_BIT_READ 2 - -/* Define read/write operation flags */ -#ifndef TRUEPHY_READ -#define TRUEPHY_READ 0 -#define TRUEPHY_WRITE 1 -#define TRUEPHY_MASK 2 -#endif - -/* Define master/slave configuration values */ -#define TRUEPHY_CFG_SLAVE 0 -#define TRUEPHY_CFG_MASTER 1 - -/* Define MDI/MDI-X settings */ -#define TRUEPHY_MDI 0 -#define TRUEPHY_MDIX 1 -#define TRUEPHY_AUTO_MDI_MDIX 2 - -/* Define 10Base-T link polarities */ -#define TRUEPHY_POLARITY_NORMAL 0 -#define TRUEPHY_POLARITY_INVERTED 1 - -/* Define auto-negotiation results */ -#define TRUEPHY_ANEG_NOT_COMPLETE 0 -#define TRUEPHY_ANEG_COMPLETE 1 -#define TRUEPHY_ANEG_DISABLED 2 - -/* Define duplex advertisement flags */ -#define TRUEPHY_ADV_DUPLEX_NONE 0x00 -#define TRUEPHY_ADV_DUPLEX_FULL 0x01 -#define TRUEPHY_ADV_DUPLEX_HALF 0x02 -#define TRUEPHY_ADV_DUPLEX_BOTH \ - (TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF) - |