diff options
Diffstat (limited to 'drivers/staging/gma500/mdfld_tpo_cmd.c')
-rw-r--r-- | drivers/staging/gma500/mdfld_tpo_cmd.c | 509 |
1 files changed, 0 insertions, 509 deletions
diff --git a/drivers/staging/gma500/mdfld_tpo_cmd.c b/drivers/staging/gma500/mdfld_tpo_cmd.c deleted file mode 100644 index c7f7c9c19bc..00000000000 --- a/drivers/staging/gma500/mdfld_tpo_cmd.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - * Copyright (c) 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicensen - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Eaton <thomas.g.eaton@intel.com> - * Scott Rowe <scott.m.rowe@intel.com> - */ - -#include "mdfld_dsi_dbi.h" -#include "mdfld_dsi_dpi.h" -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" -#include "mdfld_dsi_dbi_dpu.h" -#include "mdfld_dsi_pkg_sender.h" - -#include "displays/tpo_cmd.h" - -static struct drm_display_mode *tpo_cmd_get_config_mode(struct drm_device *dev) -{ - struct drm_display_mode *mode; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; - bool use_gct = false; - - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) - return NULL; - - if (use_gct) { - dev_dbg(dev->dev, "gct find MIPI panel.\n"); - - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; - mode->hsync_start = mode->hdisplay + \ - ((ti->hsync_offset_hi << 8) | \ - ti->hsync_offset_lo); - mode->hsync_end = mode->hsync_start + \ - ((ti->hsync_pulse_width_hi << 8) | \ - ti->hsync_pulse_width_lo); - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ - ti->hblank_lo); - mode->vsync_start = \ - mode->vdisplay + ((ti->vsync_offset_hi << 8) | \ - ti->vsync_offset_lo); - mode->vsync_end = \ - mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \ - ti->vsync_pulse_width_lo); - mode->vtotal = mode->vdisplay + \ - ((ti->vblank_hi << 8) | ti->vblank_lo); - mode->clock = ti->pixel_clock * 10; - - dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay); - dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay); - dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start); - dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end); - dev_dbg(dev->dev, "htotal is %d\n", mode->htotal); - dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start); - dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end); - dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal); - dev_dbg(dev->dev, "clock is %d\n", mode->clock); - } else { - mode->hdisplay = 864; - mode->vdisplay = 480; - mode->hsync_start = 872; - mode->hsync_end = 876; - mode->htotal = 884; - mode->vsync_start = 482; - mode->vsync_end = 494; - mode->vtotal = 486; - mode->clock = 25777; - } - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - mode->type |= DRM_MODE_TYPE_PREFERRED; - - return mode; -} - -static bool mdfld_dsi_dbi_mode_fixup(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = encoder->dev; - struct drm_display_mode *fixed_mode = tpo_cmd_get_config_mode(dev); - - if (fixed_mode) { - adjusted_mode->hdisplay = fixed_mode->hdisplay; - adjusted_mode->hsync_start = fixed_mode->hsync_start; - adjusted_mode->hsync_end = fixed_mode->hsync_end; - adjusted_mode->htotal = fixed_mode->htotal; - adjusted_mode->vdisplay = fixed_mode->vdisplay; - adjusted_mode->vsync_start = fixed_mode->vsync_start; - adjusted_mode->vsync_end = fixed_mode->vsync_end; - adjusted_mode->vtotal = fixed_mode->vtotal; - adjusted_mode->clock = fixed_mode->clock; - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - kfree(fixed_mode); - } - return true; -} - -static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on) -{ - int ret = 0; - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct mdfld_dsi_config *dsi_config = - mdfld_dsi_encoder_get_config(dsi_encoder); - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(dsi_encoder); - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 reg_offset = 0; - int pipe = (dbi_output->channel_num == 0) ? 0 : 2; - u32 data = 0; - - dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n", - pipe, on ? "On" : "Off", - dbi_output->dbi_panel_on ? "True" : "False"); - - if (pipe == 2) { - if (on) - dev_priv->dual_mipi = true; - else - dev_priv->dual_mipi = false; - reg_offset = MIPIC_REG_OFFSET; - } else { - if (!on) - dev_priv->dual_mipi = false; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - if (on) { - if (dbi_output->dbi_panel_on) - goto out_err; - - ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_ON); - if (ret) { - dev_err(dev->dev, "power on error\n"); - goto out_err; - } - - dbi_output->dbi_panel_on = true; - - if (pipe == 2) - dev_priv->dbi_panel_on2 = true; - else - dev_priv->dbi_panel_on = true; - mdfld_enable_te(dev, pipe); - } else { - if (!dbi_output->dbi_panel_on && !dbi_output->first_boot) - goto out_err; - - dbi_output->dbi_panel_on = false; - dbi_output->first_boot = false; - - if (pipe == 2) - dev_priv->dbi_panel_on2 = false; - else - dev_priv->dbi_panel_on = false; - - mdfld_disable_te(dev, pipe); - - ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_OFF); - if (ret) { - dev_err(dev->dev, "power on error\n"); - goto out_err; - } - } - - /* - * FIXME: this is a WA for TPO panel crash on DPMS on & off around - * 83 times. the root cause of this issue is that Booster in - * drvIC crashed. Add this WA so that we can resume the driver IC - * once we found that booster has a fault - */ - mdfld_dsi_get_power_mode(dsi_config, - &data, - MDFLD_DSI_HS_TRANSMISSION); - - if (on && data && !(data & (1 << 7))) { - /* Soft reset */ - mdfld_dsi_send_dcs(sender, - DCS_SOFT_RESET, - NULL, - 0, - CMD_DATA_SRC_PIPE, - MDFLD_DSI_SEND_PACKAGE); - - /* Init drvIC */ - if (dbi_output->p_funcs->drv_ic_init) - dbi_output->p_funcs->drv_ic_init(dsi_config, - pipe); - } - -out_err: - gma_power_end(dev); - if (ret) - dev_err(dev->dev, "failed\n"); -} - - -static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - int ret = 0; - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dsi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct mdfld_dsi_config *dsi_config = - mdfld_dsi_encoder_get_config(dsi_encoder); - struct mdfld_dsi_connector *dsi_connector = dsi_config->connector; - int pipe = dsi_connector->pipe; - u8 param = 0; - - /* Regs */ - u32 mipi_reg = MIPI; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 reg_offset = 0; - - /* Values */ - u32 dspcntr_val = dev_priv->dspcntr; - u32 pipeconf_val = dev_priv->pipeconf; - u32 h_active_area = mode->hdisplay; - u32 v_active_area = mode->vdisplay; - u32 mipi_val; - - mipi_val = (PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX | - TE_TRIGGER_GPIO_PIN); - - dev_dbg(dev->dev, "mipi_val =0x%x\n", mipi_val); - - dev_dbg(dev->dev, "type %s\n", (pipe == 2) ? "MIPI2" : "MIPI"); - dev_dbg(dev->dev, "h %d v %d\n", mode->hdisplay, mode->vdisplay); - - if (pipe == 2) { - mipi_reg = MIPI_C; - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - - reg_offset = MIPIC_REG_OFFSET; - - dspcntr_val = dev_priv->dspcntr2; - pipeconf_val = dev_priv->pipeconf2; - } else { - mipi_val |= 0x2; /*two lanes for port A and C respectively*/ - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - REG_WRITE(dspcntr_reg, dspcntr_val); - REG_READ(dspcntr_reg); - - /* 20ms delay before sending exit_sleep_mode */ - msleep(20); - - /* Send exit_sleep_mode DCS */ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_EXIT_SLEEP_MODE, - NULL, 0, CMD_DATA_SRC_SYSTEM_MEM); - if (ret) { - dev_err(dev->dev, "sent exit_sleep_mode faild\n"); - goto out_err; - } - - /* Send set_tear_on DCS */ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_SET_TEAR_ON, - ¶m, 1, CMD_DATA_SRC_SYSTEM_MEM); - if (ret) { - dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__); - goto out_err; - } - - /* Do some init stuff */ - REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR); - REG_READ(pipeconf_reg); - - /* TODO: this looks ugly, try to move it to CRTC mode setting*/ - if (pipe == 2) - dev_priv->pipeconf2 |= PIPEACONF_DSR; - else - dev_priv->pipeconf |= PIPEACONF_DSR; - - dev_dbg(dev->dev, "pipeconf %x\n", REG_READ(pipeconf_reg)); - - ret = mdfld_dsi_dbi_update_area(dsi_output, 0, 0, - h_active_area - 1, v_active_area - 1); - if (ret) { - dev_err(dev->dev, "update area failed\n"); - goto out_err; - } - -out_err: - gma_power_end(dev); - - if (ret) - dev_err(dev->dev, "mode set failed\n"); -} - -static void mdfld_dsi_dbi_prepare(struct drm_encoder *encoder) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output - = MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - - dbi_output->mode_flags |= MODE_SETTING_IN_ENCODER; - dbi_output->mode_flags &= ~MODE_SETTING_ENCODER_DONE; - - mdfld_dsi_dbi_set_power(encoder, false); -} - -static void mdfld_dsi_dbi_commit(struct drm_encoder *encoder) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output = - MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_drm_dpu_rect rect; - - mdfld_dsi_dbi_set_power(encoder, true); - dbi_output->mode_flags &= ~MODE_SETTING_IN_ENCODER; - - rect.x = rect.y = 0; - rect.width = 864; - rect.height = 480; - - if (dbi_output->channel_num == 1) { - dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_2; - /*if dpu enabled report a fullscreen damage*/ - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, &rect); - } else { - dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_0; - mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, &rect); - } - dbi_output->mode_flags |= MODE_SETTING_ENCODER_DONE; -} - -static void mdfld_dsi_dbi_dpms(struct drm_encoder *encoder, int mode) -{ - struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); - struct mdfld_dsi_dbi_output *dbi_output - = MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - static bool bdispoff; - - dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off")); - - if (mode == DRM_MODE_DPMS_ON) { - /* - * FIXME: in case I am wrong! - * we don't need to exit dsr here to wake up plane/pipe/pll - * if everything goes right, hw_begin will resume them all - * during set_power. - */ - if (bdispoff /* FIXME && gbgfxsuspended */) { - mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D); - bdispoff = false; - dev_priv->dispstatus = true; - } - - mdfld_dsi_dbi_set_power(encoder, true); - /* FIXME if (gbgfxsuspended) - gbgfxsuspended = false; */ - } else { - /* - * I am not sure whether this is the perfect place to - * turn rpm on since we still have a lot of CRTC turnning - * on work to do. - */ - bdispoff = true; - dev_priv->dispstatus = false; - mdfld_dsi_dbi_set_power(encoder, false); - } -} - - -/* - * Update the DBI MIPI Panel Frame Buffer. - */ -static void mdfld_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output, - int pipe) -{ - struct mdfld_dsi_pkg_sender *sender = - mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base); - struct drm_device *dev = dbi_output->dev; - struct drm_crtc *crtc = dbi_output->base.base.crtc; - struct psb_intel_crtc *psb_crtc = (crtc) ? - to_psb_intel_crtc(crtc) : NULL; - u32 dpll_reg = MRST_DPLL_A; - u32 dspcntr_reg = DSPACNTR; - u32 pipeconf_reg = PIPEACONF; - u32 dsplinoff_reg = DSPALINOFF; - u32 dspsurf_reg = DSPASURF; - u32 reg_offset = 0; - - /* If mode setting on-going, back off */ - if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || - (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING) || - !(dbi_output->mode_flags & MODE_SETTING_ENCODER_DONE)) - return; - - if (pipe == 2) { - dspcntr_reg = DSPCCNTR; - pipeconf_reg = PIPECCONF; - dsplinoff_reg = DSPCLINOFF; - dspsurf_reg = DSPCSURF; - reg_offset = MIPIC_REG_OFFSET; - } - - if (!gma_power_begin(dev, true)) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - - /* Check DBI FIFO status */ - if (!(REG_READ(dpll_reg) & DPLL_VCO_ENABLE) || - !(REG_READ(dspcntr_reg) & DISPLAY_PLANE_ENABLE) || - !(REG_READ(pipeconf_reg) & DISPLAY_PLANE_ENABLE)) - goto update_fb_out0; - - /* Refresh plane changes */ - REG_WRITE(dsplinoff_reg, REG_READ(dsplinoff_reg)); - REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg)); - REG_READ(dspsurf_reg); - - mdfld_dsi_send_dcs(sender, - DCS_WRITE_MEM_START, - NULL, - 0, - CMD_DATA_SRC_PIPE, - MDFLD_DSI_SEND_PACKAGE); - - dbi_output->dsr_fb_update_done = true; -update_fb_out0: - gma_power_end(dev); -} - -static int tpo_cmd_get_panel_info(struct drm_device *dev, - int pipe, - struct panel_info *pi) -{ - if (!dev || !pi) - return -EINVAL; - - pi->width_mm = TPO_PANEL_WIDTH; - pi->height_mm = TPO_PANEL_HEIGHT; - - return 0; -} - - -/* TPO DBI encoder helper funcs */ -static const struct drm_encoder_helper_funcs mdfld_dsi_dbi_helper_funcs = { - .dpms = mdfld_dsi_dbi_dpms, - .mode_fixup = mdfld_dsi_dbi_mode_fixup, - .prepare = mdfld_dsi_dbi_prepare, - .mode_set = mdfld_dsi_dbi_mode_set, - .commit = mdfld_dsi_dbi_commit, -}; - -/* TPO DBI encoder funcs */ -static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs) -{ - p_funcs->encoder_funcs = &mdfld_dsi_dbi_encoder_funcs; - p_funcs->encoder_helper_funcs = &mdfld_dsi_dbi_helper_funcs; - p_funcs->get_config_mode = &tpo_cmd_get_config_mode; - p_funcs->update_fb = mdfld_dsi_dbi_update_fb; - p_funcs->get_panel_info = tpo_cmd_get_panel_info; - p_funcs->reset = mdfld_dsi_panel_reset; - p_funcs->drv_ic_init = mdfld_dsi_brightness_init; -} |