diff options
Diffstat (limited to 'drivers/staging/gma500/mrst_lvds.c')
-rw-r--r-- | drivers/staging/gma500/mrst_lvds.c | 407 |
1 files changed, 0 insertions, 407 deletions
diff --git a/drivers/staging/gma500/mrst_lvds.c b/drivers/staging/gma500/mrst_lvds.c deleted file mode 100644 index e7999a2a379..00000000000 --- a/drivers/staging/gma500/mrst_lvds.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Copyright © 2006-2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Authors: - * Eric Anholt <eric@anholt.net> - * Dave Airlie <airlied@linux.ie> - * Jesse Barnes <jesse.barnes@intel.com> - */ - -#include <linux/i2c.h> -#include <drm/drmP.h> -#include <asm/mrst.h> - -#include "intel_bios.h" -#include "psb_drv.h" -#include "psb_intel_drv.h" -#include "psb_intel_reg.h" -#include "power.h" -#include <linux/pm_runtime.h> - -/* The max/min PWM frequency in BPCR[31:17] - */ -/* The smallest number is 1 (not 0) that can fit in the - * 15-bit field of the and then*/ -/* shifts to the left by one bit to get the actual 16-bit - * value that the 15-bits correspond to.*/ -#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF -#define BRIGHTNESS_MAX_LEVEL 100 - -/** - * Sets the power state for the panel. - */ -static void mrst_lvds_set_power(struct drm_device *dev, - struct psb_intel_output *output, bool on) -{ - u32 pp_status; - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!gma_power_begin(dev, true)) - return; - - if (on) { - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | - POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); - dev_priv->is_lvds_on = true; - if (dev_priv->ops->lvds_bl_power) - dev_priv->ops->lvds_bl_power(dev, true); - } else { - if (dev_priv->ops->lvds_bl_power) - dev_priv->ops->lvds_bl_power(dev, false); - REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & - ~POWER_TARGET_ON); - do { - pp_status = REG_READ(PP_STATUS); - } while (pp_status & PP_ON); - dev_priv->is_lvds_on = false; - pm_request_idle(&dev->pdev->dev); - } - gma_power_end(dev); -} - -static void mrst_lvds_dpms(struct drm_encoder *encoder, int mode) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - - if (mode == DRM_MODE_DPMS_ON) - mrst_lvds_set_power(dev, output, true); - else - mrst_lvds_set_power(dev, output, false); - - /* XXX: We never power down the LVDS pairs. */ -} - -static void mrst_lvds_mode_set(struct drm_encoder *encoder, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) -{ - struct psb_intel_mode_device *mode_dev = - enc_to_psb_intel_output(encoder)->mode_dev; - struct drm_device *dev = encoder->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - u32 lvds_port; - uint64_t v = DRM_MODE_SCALE_FULLSCREEN; - - if (!gma_power_begin(dev, true)) - return; - - /* - * The LVDS pin pair will already have been turned on in the - * psb_intel_crtc_mode_set since it has a large impact on the DPLL - * settings. - */ - lvds_port = (REG_READ(LVDS) & - (~LVDS_PIPEB_SELECT)) | - LVDS_PORT_EN | - LVDS_BORDER_EN; - - /* If the firmware says dither on Moorestown, or the BIOS does - on Oaktrail then enable dithering */ - if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) - lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; - - REG_WRITE(LVDS, lvds_port); - - drm_connector_property_get_value( - &enc_to_psb_intel_output(encoder)->base, - dev->mode_config.scaling_mode_property, - &v); - - if (v == DRM_MODE_SCALE_NO_SCALE) - REG_WRITE(PFIT_CONTROL, 0); - else if (v == DRM_MODE_SCALE_ASPECT) { - if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || - (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { - if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == - (mode->hdisplay * adjusted_mode->crtc_vdisplay)) - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); - else if ((adjusted_mode->crtc_hdisplay * - mode->vdisplay) > (mode->hdisplay * - adjusted_mode->crtc_vdisplay)) - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | - PFIT_SCALING_MODE_PILLARBOX); - else - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | - PFIT_SCALING_MODE_LETTERBOX); - } else - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); - } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ - REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); - - gma_power_end(dev); -} - -static void mrst_lvds_prepare(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (!gma_power_begin(dev, true)) - return; - - mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); - mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & - BACKLIGHT_DUTY_CYCLE_MASK); - mrst_lvds_set_power(dev, output, false); - gma_power_end(dev); -} - -static u32 mrst_lvds_get_max_backlight(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - u32 ret; - - if (gma_power_begin(dev, false)) { - ret = ((REG_READ(BLC_PWM_CTL) & - BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; - - gma_power_end(dev); - } else - ret = ((dev_priv->saveBLC_PWM_CTL & - BACKLIGHT_MODULATION_FREQ_MASK) >> - BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; - - return ret; -} - -static void mrst_lvds_commit(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - struct psb_intel_output *output = enc_to_psb_intel_output(encoder); - struct psb_intel_mode_device *mode_dev = output->mode_dev; - - if (mode_dev->backlight_duty_cycle == 0) - mode_dev->backlight_duty_cycle = - mrst_lvds_get_max_backlight(dev); - mrst_lvds_set_power(dev, output, true); -} - -static const struct drm_encoder_helper_funcs mrst_lvds_helper_funcs = { - .dpms = mrst_lvds_dpms, - .mode_fixup = psb_intel_lvds_mode_fixup, - .prepare = mrst_lvds_prepare, - .mode_set = mrst_lvds_mode_set, - .commit = mrst_lvds_commit, -}; - -static struct drm_display_mode lvds_configuration_modes[] = { - /* hard coded fixed mode for TPO LTPS LPJ040K001A */ - { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 33264, 800, 836, - 846, 1056, 0, 480, 489, 491, 525, 0, 0) }, - /* hard coded fixed mode for LVDS 800x480 */ - { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 30994, 800, 801, - 802, 1024, 0, 480, 481, 482, 525, 0, 0) }, - /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ - { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072, - 1104, 1184, 0, 600, 603, 604, 608, 0, 0) }, - /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ - { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104, - 1136, 1184, 0, 600, 603, 604, 608, 0, 0) }, - /* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */ - { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124, - 1204, 1312, 0, 600, 607, 610, 621, 0, 0) }, - /* hard coded fixed mode for LVDS 1024x768 */ - { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, - 1184, 1344, 0, 768, 771, 777, 806, 0, 0) }, - /* hard coded fixed mode for LVDS 1366x768 */ - { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430, - 1558, 1664, 0, 768, 769, 770, 776, 0, 0) }, -}; - -/* Returns the panel fixed mode from configuration. */ - -static struct drm_display_mode * -mrst_lvds_get_configuration_mode(struct drm_device *dev) -{ - struct drm_display_mode *mode = NULL; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mrst_timing_info *ti = &dev_priv->gct_data.DTD; - - if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/ - mode = kzalloc(sizeof(*mode), GFP_KERNEL); - if (!mode) - return NULL; - - mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; - mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; - mode->hsync_start = mode->hdisplay + \ - ((ti->hsync_offset_hi << 8) | \ - ti->hsync_offset_lo); - mode->hsync_end = mode->hsync_start + \ - ((ti->hsync_pulse_width_hi << 8) | \ - ti->hsync_pulse_width_lo); - mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ - ti->hblank_lo); - mode->vsync_start = \ - mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ - ti->vsync_offset_lo); - mode->vsync_end = \ - mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ - ti->vsync_pulse_width_lo); - mode->vtotal = mode->vdisplay + \ - ((ti->vblank_hi << 8) | ti->vblank_lo); - mode->clock = ti->pixel_clock * 10; -#if 0 - printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay); - printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay); - printk(KERN_INFO "HSS is %d\n", mode->hsync_start); - printk(KERN_INFO "HSE is %d\n", mode->hsync_end); - printk(KERN_INFO "htotal is %d\n", mode->htotal); - printk(KERN_INFO "VSS is %d\n", mode->vsync_start); - printk(KERN_INFO "VSE is %d\n", mode->vsync_end); - printk(KERN_INFO "vtotal is %d\n", mode->vtotal); - printk(KERN_INFO "clock is %d\n", mode->clock); -#endif - } else - mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]); - - drm_mode_set_name(mode); - drm_mode_set_crtcinfo(mode, 0); - - return mode; -} - -/** - * mrst_lvds_init - setup LVDS connectors on this device - * @dev: drm device - * - * Create the connector, register the LVDS DDC bus, and try to figure out what - * modes we can display on the LVDS panel (if present). - */ -void mrst_lvds_init(struct drm_device *dev, - struct psb_intel_mode_device *mode_dev) -{ - struct psb_intel_output *psb_intel_output; - struct drm_connector *connector; - struct drm_encoder *encoder; - struct drm_psb_private *dev_priv = - (struct drm_psb_private *) dev->dev_private; - struct edid *edid; - int ret = 0; - struct i2c_adapter *i2c_adap; - struct drm_display_mode *scan; /* *modes, *bios_mode; */ - - psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL); - if (!psb_intel_output) - return; - - psb_intel_output->mode_dev = mode_dev; - connector = &psb_intel_output->base; - encoder = &psb_intel_output->enc; - dev_priv->is_lvds_on = true; - drm_connector_init(dev, &psb_intel_output->base, - &psb_intel_lvds_connector_funcs, - DRM_MODE_CONNECTOR_LVDS); - - drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs, - DRM_MODE_ENCODER_LVDS); - - drm_mode_connector_attach_encoder(&psb_intel_output->base, - &psb_intel_output->enc); - psb_intel_output->type = INTEL_OUTPUT_LVDS; - - drm_encoder_helper_add(encoder, &mrst_lvds_helper_funcs); - drm_connector_helper_add(connector, - &psb_intel_lvds_connector_helper_funcs); - connector->display_info.subpixel_order = SubPixelHorizontalRGB; - connector->interlace_allowed = false; - connector->doublescan_allowed = false; - - drm_connector_attach_property(connector, - dev->mode_config.scaling_mode_property, - DRM_MODE_SCALE_FULLSCREEN); - drm_connector_attach_property(connector, - dev_priv->backlight_property, - BRIGHTNESS_MAX_LEVEL); - - mode_dev->panel_wants_dither = false; - if (dev_priv->vbt_data.size != 0x00) - mode_dev->panel_wants_dither = (dev_priv->gct_data. - Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); - - /* - * LVDS discovery: - * 1) check for EDID on DDC - * 2) check for VBT data - * 3) check to see if LVDS is already on - * if none of the above, no panel - * 4) make sure lid is open - * if closed, act like it's not there for now - */ - - i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); - - if (i2c_adap == NULL) - dev_err(dev->dev, "No ddc adapter available!\n"); - /* - * Attempt to get the fixed panel mode from DDC. Assume that the - * preferred mode is the right one. - */ - if (i2c_adap) { - edid = drm_get_edid(connector, i2c_adap); - if (edid) { - drm_mode_connector_update_edid_property(connector, - edid); - ret = drm_add_edid_modes(connector, edid); - kfree(edid); - } - - list_for_each_entry(scan, &connector->probed_modes, head) { - if (scan->type & DRM_MODE_TYPE_PREFERRED) { - mode_dev->panel_fixed_mode = - drm_mode_duplicate(dev, scan); - goto out; /* FIXME: check for quirks */ - } - } - } - /* - * If we didn't get EDID, try geting panel timing - * from configuration data - */ - mode_dev->panel_fixed_mode = mrst_lvds_get_configuration_mode(dev); - - if (mode_dev->panel_fixed_mode) { - mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - goto out; /* FIXME: check for quirks */ - } - - /* If we still don't have a mode after all that, give up. */ - if (!mode_dev->panel_fixed_mode) { - dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); - goto failed_find; - } - -out: - drm_sysfs_connector_add(connector); - return; - -failed_find: - dev_dbg(dev->dev, "No LVDS modes found, disabling.\n"); - if (psb_intel_output->ddc_bus) - psb_intel_i2c_destroy(psb_intel_output->ddc_bus); - -/* failed_ddc: */ - - drm_encoder_cleanup(encoder); - drm_connector_cleanup(connector); - kfree(connector); -} - |