diff options
Diffstat (limited to 'drivers/staging/gma500/psb_intel_reg.h')
-rw-r--r-- | drivers/staging/gma500/psb_intel_reg.h | 1235 |
1 files changed, 0 insertions, 1235 deletions
diff --git a/drivers/staging/gma500/psb_intel_reg.h b/drivers/staging/gma500/psb_intel_reg.h deleted file mode 100644 index 1ac16aa791c..00000000000 --- a/drivers/staging/gma500/psb_intel_reg.h +++ /dev/null @@ -1,1235 +0,0 @@ -/* - * Copyright (c) 2009, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ -#ifndef __PSB_INTEL_REG_H__ -#define __PSB_INTEL_REG_H__ - -#define BLC_PWM_CTL 0x61254 -#define BLC_PWM_CTL2 0x61250 -#define BLC_PWM_CTL_C 0x62254 -#define BLC_PWM_CTL2_C 0x62250 -#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) -/* - * This is the most significant 15 bits of the number of backlight cycles in a - * complete cycle of the modulated backlight control. - * - * The actual value is this field multiplied by two. - */ -#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) -#define BLM_LEGACY_MODE (1 << 16) -/* - * This is the number of cycles out of the backlight modulation cycle for which - * the backlight is on. - * - * This field must be no greater than the number of cycles in the complete - * backlight modulation cycle. - */ -#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) -#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) - -#define I915_GCFGC 0xf0 -#define I915_LOW_FREQUENCY_ENABLE (1 << 7) -#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) -#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) -#define I915_DISPLAY_CLOCK_MASK (7 << 4) - -#define I855_HPLLCC 0xc0 -#define I855_CLOCK_CONTROL_MASK (3 << 0) -#define I855_CLOCK_133_200 (0 << 0) -#define I855_CLOCK_100_200 (1 << 0) -#define I855_CLOCK_100_133 (2 << 0) -#define I855_CLOCK_166_250 (3 << 0) - -/* I830 CRTC registers */ -#define HTOTAL_A 0x60000 -#define HBLANK_A 0x60004 -#define HSYNC_A 0x60008 -#define VTOTAL_A 0x6000c -#define VBLANK_A 0x60010 -#define VSYNC_A 0x60014 -#define PIPEASRC 0x6001c -#define BCLRPAT_A 0x60020 -#define VSYNCSHIFT_A 0x60028 - -#define HTOTAL_B 0x61000 -#define HBLANK_B 0x61004 -#define HSYNC_B 0x61008 -#define VTOTAL_B 0x6100c -#define VBLANK_B 0x61010 -#define VSYNC_B 0x61014 -#define PIPEBSRC 0x6101c -#define BCLRPAT_B 0x61020 -#define VSYNCSHIFT_B 0x61028 - -#define HTOTAL_C 0x62000 -#define HBLANK_C 0x62004 -#define HSYNC_C 0x62008 -#define VTOTAL_C 0x6200c -#define VBLANK_C 0x62010 -#define VSYNC_C 0x62014 -#define PIPECSRC 0x6201c -#define BCLRPAT_C 0x62020 -#define VSYNCSHIFT_C 0x62028 - -#define PP_STATUS 0x61200 -# define PP_ON (1 << 31) -/* - * Indicates that all dependencies of the panel are on: - * - * - PLL enabled - * - pipe enabled - * - LVDS/DVOB/DVOC on - */ -#define PP_READY (1 << 30) -#define PP_SEQUENCE_NONE (0 << 28) -#define PP_SEQUENCE_ON (1 << 28) -#define PP_SEQUENCE_OFF (2 << 28) -#define PP_SEQUENCE_MASK 0x30000000 -#define PP_CONTROL 0x61204 -#define POWER_TARGET_ON (1 << 0) - -#define LVDSPP_ON 0x61208 -#define LVDSPP_OFF 0x6120c -#define PP_CYCLE 0x61210 - -#define PFIT_CONTROL 0x61230 -#define PFIT_ENABLE (1 << 31) -#define PFIT_PIPE_MASK (3 << 29) -#define PFIT_PIPE_SHIFT 29 -#define PFIT_SCALING_MODE_PILLARBOX (1 << 27) -#define PFIT_SCALING_MODE_LETTERBOX (3 << 26) -#define VERT_INTERP_DISABLE (0 << 10) -#define VERT_INTERP_BILINEAR (1 << 10) -#define VERT_INTERP_MASK (3 << 10) -#define VERT_AUTO_SCALE (1 << 9) -#define HORIZ_INTERP_DISABLE (0 << 6) -#define HORIZ_INTERP_BILINEAR (1 << 6) -#define HORIZ_INTERP_MASK (3 << 6) -#define HORIZ_AUTO_SCALE (1 << 5) -#define PANEL_8TO6_DITHER_ENABLE (1 << 3) - -#define PFIT_PGM_RATIOS 0x61234 -#define PFIT_VERT_SCALE_MASK 0xfff00000 -#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 - -#define PFIT_AUTO_RATIOS 0x61238 - -#define DPLL_A 0x06014 -#define DPLL_B 0x06018 -#define DPLL_VCO_ENABLE (1 << 31) -#define DPLL_DVO_HIGH_SPEED (1 << 30) -#define DPLL_SYNCLOCK_ENABLE (1 << 29) -#define DPLL_VGA_MODE_DIS (1 << 28) -#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ -#define DPLLB_MODE_LVDS (2 << 26) /* i915 */ -#define DPLL_MODE_MASK (3 << 26) -#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ -#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ -#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ -#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ -#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ -#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ -#define DPLL_LOCK (1 << 15) /* CDV */ - -/* - * The i830 generation, in DAC/serial mode, defines p1 as two plus this - * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. - */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 -/* - * The i830 generation, in LVDS mode, defines P1 as the bit number set within - * this field (only one bit may be set). - */ -#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 -#define DPLL_FPA01_P1_POST_DIV_SHIFT 16 -#define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required - * in DVO non-gang */ -# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ -#define PLL_REF_INPUT_DREFCLK (0 << 13) -#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ -#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO - * TVCLKIN */ -#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) -#define PLL_REF_INPUT_MASK (3 << 13) -#define PLL_LOAD_PULSE_PHASE_SHIFT 9 -/* - * Parallel to Serial Load Pulse phase selection. - * Selects the phase for the 10X DPLL clock for the PCIe - * digital display port. The range is 4 to 13; 10 or more - * is just a flip delay. The default is 6 - */ -#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) -#define DISPLAY_RATE_SELECT_FPA1 (1 << 8) - -/* - * SDVO multiplier for 945G/GM. Not used on 965. - * - * DPLL_MD_UDI_MULTIPLIER_MASK - */ -#define SDVO_MULTIPLIER_MASK 0x000000ff -#define SDVO_MULTIPLIER_SHIFT_HIRES 4 -#define SDVO_MULTIPLIER_SHIFT_VGA 0 - -/* - * PLL_MD - */ -/* Pipe A SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_A_MD 0x0601c -/* Pipe B SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_B_MD 0x06020 -/* - * UDI pixel divider, controlling how many pixels are stuffed into a packet. - * - * Value is pixels minus 1. Must be set to 1 pixel for SDVO. - */ -#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 -#define DPLL_MD_UDI_DIVIDER_SHIFT 24 -/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ -#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 -#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 -/* - * SDVO/UDI pixel multiplier. - * - * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus - * clock rate is 10 times the DPLL clock. At low resolution/refresh rate - * modes, the bus rate would be below the limits, so SDVO allows for stuffing - * dummy bytes in the datastream at an increased clock rate, with both sides of - * the link knowing how many bytes are fill. - * - * So, for a mode with a dotclock of 65Mhz, we would want to double the clock - * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be - * set to 130Mhz, and the SDVO multiplier set to 2x in this register and - * through an SDVO command. - * - * This register field has values of multiplication factor minus 1, with - * a maximum multiplier of 5 for SDVO. - */ -#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 -#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 -/* - * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. - * This best be set to the default value (3) or the CRT won't work. No, - * I don't entirely understand what this does... - */ -#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f -#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 - -#define DPLL_TEST 0x606c -#define DPLLB_TEST_SDVO_DIV_1 (0 << 22) -#define DPLLB_TEST_SDVO_DIV_2 (1 << 22) -#define DPLLB_TEST_SDVO_DIV_4 (2 << 22) -#define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) -#define DPLLB_TEST_N_BYPASS (1 << 19) -#define DPLLB_TEST_M_BYPASS (1 << 18) -#define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) -#define DPLLA_TEST_N_BYPASS (1 << 3) -#define DPLLA_TEST_M_BYPASS (1 << 2) -#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) - -#define ADPA 0x61100 -#define ADPA_DAC_ENABLE (1 << 31) -#define ADPA_DAC_DISABLE 0 -#define ADPA_PIPE_SELECT_MASK (1 << 30) -#define ADPA_PIPE_A_SELECT 0 -#define ADPA_PIPE_B_SELECT (1 << 30) -#define ADPA_USE_VGA_HVPOLARITY (1 << 15) -#define ADPA_SETS_HVPOLARITY 0 -#define ADPA_VSYNC_CNTL_DISABLE (1 << 11) -#define ADPA_VSYNC_CNTL_ENABLE 0 -#define ADPA_HSYNC_CNTL_DISABLE (1 << 10) -#define ADPA_HSYNC_CNTL_ENABLE 0 -#define ADPA_VSYNC_ACTIVE_HIGH (1 << 4) -#define ADPA_VSYNC_ACTIVE_LOW 0 -#define ADPA_HSYNC_ACTIVE_HIGH (1 << 3) -#define ADPA_HSYNC_ACTIVE_LOW 0 - -#define FPA0 0x06040 -#define FPA1 0x06044 -#define FPB0 0x06048 -#define FPB1 0x0604c -#define FP_N_DIV_MASK 0x003f0000 -#define FP_N_DIV_SHIFT 16 -#define FP_M1_DIV_MASK 0x00003f00 -#define FP_M1_DIV_SHIFT 8 -#define FP_M2_DIV_MASK 0x0000003f -#define FP_M2_DIV_SHIFT 0 - -#define PORT_HOTPLUG_EN 0x61110 -#define SDVOB_HOTPLUG_INT_EN (1 << 26) -#define SDVOC_HOTPLUG_INT_EN (1 << 25) -#define TV_HOTPLUG_INT_EN (1 << 18) -#define CRT_HOTPLUG_INT_EN (1 << 9) -#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) -/* CDV.. */ -#define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) -#define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) -#define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) -#define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) -#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) -#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) -#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) -#define CRT_HOTPLUG_DETECT_MASK 0x000000F8 - -#define PORT_HOTPLUG_STAT 0x61114 -#define CRT_HOTPLUG_INT_STATUS (1 << 11) -#define TV_HOTPLUG_INT_STATUS (1 << 10) -#define CRT_HOTPLUG_MONITOR_MASK (3 << 8) -#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) -#define CRT_HOTPLUG_MONITOR_MONO (2 << 8) -#define CRT_HOTPLUG_MONITOR_NONE (0 << 8) -#define SDVOC_HOTPLUG_INT_STATUS (1 << 7) -#define SDVOB_HOTPLUG_INT_STATUS (1 << 6) - -#define SDVOB 0x61140 -#define SDVOC 0x61160 -#define SDVO_ENABLE (1 << 31) -#define SDVO_PIPE_B_SELECT (1 << 30) -#define SDVO_STALL_SELECT (1 << 29) -#define SDVO_INTERRUPT_ENABLE (1 << 26) - -/** - * 915G/GM SDVO pixel multiplier. - * - * Programmed value is multiplier - 1, up to 5x. - * - * DPLL_MD_UDI_MULTIPLIER_MASK - */ -#define SDVO_PORT_MULTIPLY_MASK (7 << 23) -#define SDVO_PORT_MULTIPLY_SHIFT 23 -#define SDVO_PHASE_SELECT_MASK (15 << 19) -#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) -#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) -#define SDVOC_GANG_MODE (1 << 16) -#define SDVO_BORDER_ENABLE (1 << 7) -#define SDVOB_PCIE_CONCURRENCY (1 << 3) -#define SDVO_DETECTED (1 << 2) -/* Bits to be preserved when writing */ -#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) -#define SDVOC_PRESERVE_MASK (1 << 17) - -/* - * This register controls the LVDS output enable, pipe selection, and data - * format selection. - * - * All of the clock/data pairs are force powered down by power sequencing. - */ -#define LVDS 0x61180 -/* - * Enables the LVDS port. This bit must be set before DPLLs are enabled, as - * the DPLL semantics change when the LVDS is assigned to that pipe. - */ -#define LVDS_PORT_EN (1 << 31) -/* Selects pipe B for LVDS data. Must be set on pre-965. */ -#define LVDS_PIPEB_SELECT (1 << 30) - -/* Turns on border drawing to allow centered display. */ -#define LVDS_BORDER_EN (1 << 15) - -/* - * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per - * pixel. - */ -#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) -#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) -#define LVDS_A0A2_CLKA_POWER_UP (3 << 8) -/* - * Controls the A3 data pair, which contains the additional LSBs for 24 bit - * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be - * on. - */ -#define LVDS_A3_POWER_MASK (3 << 6) -#define LVDS_A3_POWER_DOWN (0 << 6) -#define LVDS_A3_POWER_UP (3 << 6) -/* - * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP - * is set. - */ -#define LVDS_CLKB_POWER_MASK (3 << 4) -#define LVDS_CLKB_POWER_DOWN (0 << 4) -#define LVDS_CLKB_POWER_UP (3 << 4) -/* - * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 - * setting for whether we are in dual-channel mode. The B3 pair will - * additionally only be powered up when LVDS_A3_POWER_UP is set. - */ -#define LVDS_B0B3_POWER_MASK (3 << 2) -#define LVDS_B0B3_POWER_DOWN (0 << 2) -#define LVDS_B0B3_POWER_UP (3 << 2) - -#define PIPEACONF 0x70008 -#define PIPEACONF_ENABLE (1 << 31) -#define PIPEACONF_DISABLE 0 -#define PIPEACONF_DOUBLE_WIDE (1 << 30) -#define PIPECONF_ACTIVE (1 << 30) -#define I965_PIPECONF_ACTIVE (1 << 30) -#define PIPECONF_DSIPLL_LOCK (1 << 29) -#define PIPEACONF_SINGLE_WIDE 0 -#define PIPEACONF_PIPE_UNLOCKED 0 -#define PIPEACONF_DSR (1 << 26) -#define PIPEACONF_PIPE_LOCKED (1 << 25) -#define PIPEACONF_PALETTE 0 -#define PIPECONF_FORCE_BORDER (1 << 25) -#define PIPEACONF_GAMMA (1 << 24) -#define PIPECONF_PROGRESSIVE (0 << 21) -#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) -#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) -#define PIPECONF_PLANE_OFF (1 << 19) -#define PIPECONF_CURSOR_OFF (1 << 18) - -#define PIPEBCONF 0x71008 -#define PIPEBCONF_ENABLE (1 << 31) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_DOUBLE_WIDE (1 << 30) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_GAMMA (1 << 24) -#define PIPEBCONF_PALETTE 0 - -#define PIPECCONF 0x72008 - -#define PIPEBGCMAXRED 0x71010 -#define PIPEBGCMAXGREEN 0x71014 -#define PIPEBGCMAXBLUE 0x71018 - -#define PIPEASTAT 0x70024 -#define PIPEBSTAT 0x71024 -#define PIPECSTAT 0x72024 -#define PIPE_VBLANK_INTERRUPT_STATUS (1UL << 1) -#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL << 2) -#define PIPE_VBLANK_CLEAR (1 << 1) -#define PIPE_VBLANK_STATUS (1 << 1) -#define PIPE_TE_STATUS (1UL << 6) -#define PIPE_DPST_EVENT_STATUS (1UL << 7) -#define PIPE_VSYNC_CLEAR (1UL << 9) -#define PIPE_VSYNC_STATUS (1UL << 9) -#define PIPE_HDMI_AUDIO_UNDERRUN_STATUS (1UL << 10) -#define PIPE_HDMI_AUDIO_BUFFER_DONE_STATUS (1UL << 11) -#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL << 17) -#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL << 18) -#define PIPE_TE_ENABLE (1UL << 22) -#define PIPE_DPST_EVENT_ENABLE (1UL << 23) -#define PIPE_VSYNC_ENABL (1UL << 25) -#define PIPE_HDMI_AUDIO_UNDERRUN (1UL << 26) -#define PIPE_HDMI_AUDIO_BUFFER_DONE (1UL << 27) -#define PIPE_HDMI_AUDIO_INT_MASK (PIPE_HDMI_AUDIO_UNDERRUN | \ - PIPE_HDMI_AUDIO_BUFFER_DONE) -#define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16)) -#define PIPE_VBLANK_MASK ((1 << 25)|(1 << 24)|(1 << 18)|(1 << 17)) -#define HISTOGRAM_INT_CONTROL 0x61268 -#define HISTOGRAM_BIN_DATA 0X61264 -#define HISTOGRAM_LOGIC_CONTROL 0x61260 -#define PWM_CONTROL_LOGIC 0x61250 -#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL << 10) -#define HISTOGRAM_INTERRUPT_ENABLE (1UL << 31) -#define HISTOGRAM_LOGIC_ENABLE (1UL << 31) -#define PWM_LOGIC_ENABLE (1UL << 31) -#define PWM_PHASEIN_ENABLE (1UL << 25) -#define PWM_PHASEIN_INT_ENABLE (1UL << 24) -#define PWM_PHASEIN_VB_COUNT 0x00001f00 -#define PWM_PHASEIN_INC 0x0000001f -#define HISTOGRAM_INT_CTRL_CLEAR (1UL << 30) -#define DPST_YUV_LUMA_MODE 0 - -struct dpst_ie_histogram_control { - union { - uint32_t data; - struct { - uint32_t bin_reg_index:7; - uint32_t reserved:4; - uint32_t bin_reg_func_select:1; - uint32_t sync_to_phase_in:1; - uint32_t alt_enhancement_mode:2; - uint32_t reserved1:1; - uint32_t sync_to_phase_in_count:8; - uint32_t histogram_mode_select:1; - uint32_t reserved2:4; - uint32_t ie_pipe_assignment:1; - uint32_t ie_mode_table_enabled:1; - uint32_t ie_histogram_enable:1; - }; - }; -}; - -struct dpst_guardband { - union { - uint32_t data; - struct { - uint32_t guardband:22; - uint32_t guardband_interrupt_delay:8; - uint32_t interrupt_status:1; - uint32_t interrupt_enable:1; - }; - }; -}; - -#define PIPEAFRAMEHIGH 0x70040 -#define PIPEAFRAMEPIXEL 0x70044 -#define PIPEBFRAMEHIGH 0x71040 -#define PIPEBFRAMEPIXEL 0x71044 -#define PIPECFRAMEHIGH 0x72040 -#define PIPECFRAMEPIXEL 0x72044 -#define PIPE_FRAME_HIGH_MASK 0x0000ffff -#define PIPE_FRAME_HIGH_SHIFT 0 -#define PIPE_FRAME_LOW_MASK 0xff000000 -#define PIPE_FRAME_LOW_SHIFT 24 -#define PIPE_PIXEL_MASK 0x00ffffff -#define PIPE_PIXEL_SHIFT 0 - -#define DSPARB 0x70030 -#define DSPFW1 0x70034 -#define DSPFW2 0x70038 -#define DSPFW3 0x7003c -#define DSPFW4 0x70050 -#define DSPFW5 0x70054 -#define DSPFW6 0x70058 -#define DSPCHICKENBIT 0x70400 -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DSPCCNTR 0x72180 -#define DISPLAY_PLANE_ENABLE (1 << 31) -#define DISPLAY_PLANE_DISABLE 0 -#define DISPPLANE_GAMMA_ENABLE (1 << 30) -#define DISPPLANE_GAMMA_DISABLE 0 -#define DISPPLANE_PIXFORMAT_MASK (0xf << 26) -#define DISPPLANE_8BPP (0x2 << 26) -#define DISPPLANE_15_16BPP (0x4 << 26) -#define DISPPLANE_16BPP (0x5 << 26) -#define DISPPLANE_32BPP_NO_ALPHA (0x6 << 26) -#define DISPPLANE_32BPP (0x7 << 26) -#define DISPPLANE_STEREO_ENABLE (1 << 25) -#define DISPPLANE_STEREO_DISABLE 0 -#define DISPPLANE_SEL_PIPE_MASK (1 << 24) -#define DISPPLANE_SEL_PIPE_POS 24 -#define DISPPLANE_SEL_PIPE_A 0 -#define DISPPLANE_SEL_PIPE_B (1 << 24) -#define DISPPLANE_SRC_KEY_ENABLE (1 << 22) -#define DISPPLANE_SRC_KEY_DISABLE 0 -#define DISPPLANE_LINE_DOUBLE (1 << 20) -#define DISPPLANE_NO_LINE_DOUBLE 0 -#define DISPPLANE_STEREO_POLARITY_FIRST 0 -#define DISPPLANE_STEREO_POLARITY_SECOND (1 << 18) -/* plane B only */ -#define DISPPLANE_ALPHA_TRANS_ENABLE (1 << 15) -#define DISPPLANE_ALPHA_TRANS_DISABLE 0 -#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 -#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) -#define DISPPLANE_BOTTOM (4) - -#define DSPABASE 0x70184 -#define DSPALINOFF 0x70184 -#define DSPASTRIDE 0x70188 - -#define DSPBBASE 0x71184 -#define DSPBLINOFF 0X71184 -#define DSPBADDR DSPBBASE -#define DSPBSTRIDE 0x71188 - -#define DSPCBASE 0x72184 -#define DSPCLINOFF 0x72184 -#define DSPCSTRIDE 0x72188 - -#define DSPAKEYVAL 0x70194 -#define DSPAKEYMASK 0x70198 - -#define DSPAPOS 0x7018C /* reserved */ -#define DSPASIZE 0x70190 -#define DSPBPOS 0x7118C -#define DSPBSIZE 0x71190 -#define DSPCPOS 0x7218C -#define DSPCSIZE 0x72190 - -#define DSPASURF 0x7019C -#define DSPATILEOFF 0x701A4 - -#define DSPBSURF 0x7119C -#define DSPBTILEOFF 0x711A4 - -#define DSPCSURF 0x7219C -#define DSPCTILEOFF 0x721A4 -#define DSPCKEYMAXVAL 0x721A0 -#define DSPCKEYMINVAL 0x72194 -#define DSPCKEYMSK 0x72198 - -#define VGACNTRL 0x71400 -#define VGA_DISP_DISABLE (1 << 31) -#define VGA_2X_MODE (1 << 30) -#define VGA_PIPE_B_SELECT (1 << 29) - -/* - * Overlay registers - */ -#define OV_C_OFFSET 0x08000 -#define OV_OVADD 0x30000 -#define OV_DOVASTA 0x30008 -# define OV_PIPE_SELECT ((1 << 6)|(1 << 7)) -# define OV_PIPE_SELECT_POS 6 -# define OV_PIPE_A 0 -# define OV_PIPE_C 1 -#define OV_OGAMC5 0x30010 -#define OV_OGAMC4 0x30014 -#define OV_OGAMC3 0x30018 -#define OV_OGAMC2 0x3001C -#define OV_OGAMC1 0x30020 -#define OV_OGAMC0 0x30024 -#define OVC_OVADD 0x38000 -#define OVC_DOVCSTA 0x38008 -#define OVC_OGAMC5 0x38010 -#define OVC_OGAMC4 0x38014 -#define OVC_OGAMC3 0x38018 -#define OVC_OGAMC2 0x3801C -#define OVC_OGAMC1 0x38020 -#define OVC_OGAMC0 0x38024 - -/* - * Some BIOS scratch area registers. The 845 (and 830?) store the amount - * of video memory available to the BIOS in SWF1. - */ -#define SWF0 0x71410 -#define SWF1 0x71414 -#define SWF2 0x71418 -#define SWF3 0x7141c -#define SWF4 0x71420 -#define SWF5 0x71424 -#define SWF6 0x71428 - -/* - * 855 scratch registers. - */ -#define SWF00 0x70410 -#define SWF01 0x70414 -#define SWF02 0x70418 -#define SWF03 0x7041c -#define SWF04 0x70420 -#define SWF05 0x70424 -#define SWF06 0x70428 - -#define SWF10 SWF0 -#define SWF11 SWF1 -#define SWF12 SWF2 -#define SWF13 SWF3 -#define SWF14 SWF4 -#define SWF15 SWF5 -#define SWF16 SWF6 - -#define SWF30 0x72414 -#define SWF31 0x72418 -#define SWF32 0x7241c - - -/* - * Palette registers - */ -#define PALETTE_A 0x0a000 -#define PALETTE_B 0x0a800 -#define PALETTE_C 0x0ac00 - -/* Cursor A & B regs */ -#define CURACNTR 0x70080 -#define CURSOR_MODE_DISABLE 0x00 -#define CURSOR_MODE_64_32B_AX 0x07 -#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) -#define MCURSOR_GAMMA_ENABLE (1 << 26) -#define CURABASE 0x70084 -#define CURAPOS 0x70088 -#define CURSOR_POS_MASK 0x007FF -#define CURSOR_POS_SIGN 0x8000 -#define CURSOR_X_SHIFT 0 -#define CURSOR_Y_SHIFT 16 -#define CURBCNTR 0x700c0 -#define CURBBASE 0x700c4 -#define CURBPOS 0x700c8 -#define CURCCNTR 0x700e0 -#define CURCBASE 0x700e4 -#define CURCPOS 0x700e8 - -/* - * Interrupt Registers - */ -#define IER 0x020a0 -#define IIR 0x020a4 -#define IMR 0x020a8 -#define ISR 0x020ac - -/* - * MOORESTOWN delta registers - */ -#define MRST_DPLL_A 0x0f014 -#define MDFLD_DPLL_B 0x0f018 -#define MDFLD_INPUT_REF_SEL (1 << 14) -#define MDFLD_VCO_SEL (1 << 16) -#define DPLLA_MODE_LVDS (2 << 26) /* mrst */ -#define MDFLD_PLL_LATCHEN (1 << 28) -#define MDFLD_PWR_GATE_EN (1 << 30) -#define MDFLD_P1_MASK (0x1FF << 17) -#define MRST_FPA0 0x0f040 -#define MRST_FPA1 0x0f044 -#define MDFLD_DPLL_DIV0 0x0f048 -#define MDFLD_DPLL_DIV1 0x0f04c -#define MRST_PERF_MODE 0x020f4 - -/* - * MEDFIELD HDMI registers - */ -#define HDMIPHYMISCCTL 0x61134 -#define HDMI_PHY_POWER_DOWN 0x7f -#define HDMIB_CONTROL 0x61140 -#define HDMIB_PORT_EN (1 << 31) -#define HDMIB_PIPE_B_SELECT (1 << 30) -#define HDMIB_NULL_PACKET (1 << 9) -#define HDMIB_HDCP_PORT (1 << 5) - -/* #define LVDS 0x61180 */ -#define MRST_PANEL_8TO6_DITHER_ENABLE (1 << 25) -#define MRST_PANEL_24_DOT_1_FORMAT (1 << 24) -#define LVDS_A3_POWER_UP_0_OUTPUT (1 << 6) - -#define MIPI 0x61190 -#define MIPI_C 0x62190 -#define MIPI_PORT_EN (1 << 31) -/* Turns on border drawing to allow centered display. */ -#define SEL_FLOPPED_HSTX (1 << 23) -#define PASS_FROM_SPHY_TO_AFE (1 << 16) -#define MIPI_BORDER_EN (1 << 15) -#define MIPIA_3LANE_MIPIC_1LANE 0x1 -#define MIPIA_2LANE_MIPIC_2LANE 0x2 -#define TE_TRIGGER_DSI_PROTOCOL (1 << 2) -#define TE_TRIGGER_GPIO_PIN (1 << 3) -#define MIPI_TE_COUNT 0x61194 - -/* #define PP_CONTROL 0x61204 */ -#define POWER_DOWN_ON_RESET (1 << 1) - -/* #define PFIT_CONTROL 0x61230 */ -#define PFIT_PIPE_SELECT (3 << 29) -#define PFIT_PIPE_SELECT_SHIFT (29) - -/* #define BLC_PWM_CTL 0x61254 */ -#define MRST_BACKLIGHT_MODULATION_FREQ_SHIFT (16) -#define MRST_BACKLIGHT_MODULATION_FREQ_MASK (0xffff << 16) - -/* #define PIPEACONF 0x70008 */ -#define PIPEACONF_PIPE_STATE (1 << 30) -/* #define DSPACNTR 0x70180 */ - -#define MRST_DSPABASE 0x7019c -#define MRST_DSPBBASE 0x7119c -#define MDFLD_DSPCBASE 0x7219c - -/* - * Moorestown registers. - */ - -/* - * MIPI IP registers - */ -#define MIPIC_REG_OFFSET 0x800 - -#define DEVICE_READY_REG 0xb000 -#define LP_OUTPUT_HOLD (1 << 16) -#define EXIT_ULPS_DEV_READY 0x3 -#define LP_OUTPUT_HOLD_RELEASE 0x810000 -# define ENTERING_ULPS (2 << 1) -# define EXITING_ULPS (1 << 1) -# define ULPS_MASK (3 << 1) -# define BUS_POSSESSION (1 << 3) -#define INTR_STAT_REG 0xb004 -#define RX_SOT_ERROR (1 << 0) -#define RX_SOT_SYNC_ERROR (1 << 1) -#define RX_ESCAPE_MODE_ENTRY_ERROR (1 << 3) -#define RX_LP_TX_SYNC_ERROR (1 << 4) -#define RX_HS_RECEIVE_TIMEOUT_ERROR (1 << 5) -#define RX_FALSE_CONTROL_ERROR (1 << 6) -#define RX_ECC_SINGLE_BIT_ERROR (1 << 7) -#define RX_ECC_MULTI_BIT_ERROR (1 << 8) -#define RX_CHECKSUM_ERROR (1 << 9) -#define RX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 10) -#define RX_DSI_VC_ID_INVALID (1 << 11) -#define TX_FALSE_CONTROL_ERROR (1 << 12) -#define TX_ECC_SINGLE_BIT_ERROR (1 << 13) -#define TX_ECC_MULTI_BIT_ERROR (1 << 14) -#define TX_CHECKSUM_ERROR (1 << 15) -#define TX_DSI_DATA_TYPE_NOT_RECOGNIZED (1 << 16) -#define TX_DSI_VC_ID_INVALID (1 << 17) -#define HIGH_CONTENTION (1 << 18) -#define LOW_CONTENTION (1 << 19) -#define DPI_FIFO_UNDER_RUN (1 << 20) -#define HS_TX_TIMEOUT (1 << 21) -#define LP_RX_TIMEOUT (1 << 22) -#define TURN_AROUND_ACK_TIMEOUT (1 << 23) -#define ACK_WITH_NO_ERROR (1 << 24) -#define HS_GENERIC_WR_FIFO_FULL (1 << 27) -#define LP_GENERIC_WR_FIFO_FULL (1 << 28) -#define SPL_PKT_SENT (1 << 30) -#define INTR_EN_REG 0xb008 -#define DSI_FUNC_PRG_REG 0xb00c -#define DPI_CHANNEL_NUMBER_POS 0x03 -#define DBI_CHANNEL_NUMBER_POS 0x05 -#define FMT_DPI_POS 0x07 -#define FMT_DBI_POS 0x0A -#define DBI_DATA_WIDTH_POS 0x0D - -/* DPI PIXEL FORMATS */ -#define RGB_565_FMT 0x01 /* RGB 565 FORMAT */ -#define RGB_666_FMT 0x02 /* RGB 666 FORMAT */ -#define LRGB_666_FMT 0x03 /* RGB LOOSELY PACKED - * 666 FORMAT - */ -#define RGB_888_FMT 0x04 /* RGB 888 FORMAT */ -#define VIRTUAL_CHANNEL_NUMBER_0 0x00 /* Virtual channel 0 */ -#define VIRTUAL_CHANNEL_NUMBER_1 0x01 /* Virtual channel 1 */ -#define VIRTUAL_CHANNEL_NUMBER_2 0x02 /* Virtual channel 2 */ -#define VIRTUAL_CHANNEL_NUMBER_3 0x03 /* Virtual channel 3 */ - -#define DBI_NOT_SUPPORTED 0x00 /* command mode - * is not supported - */ -#define DBI_DATA_WIDTH_16BIT 0x01 /* 16 bit data */ -#define DBI_DATA_WIDTH_9BIT 0x02 /* 9 bit data */ -#define DBI_DATA_WIDTH_8BIT 0x03 /* 8 bit data */ -#define DBI_DATA_WIDTH_OPT1 0x04 /* option 1 */ -#define DBI_DATA_WIDTH_OPT2 0x05 /* option 2 */ - -#define HS_TX_TIMEOUT_REG 0xb010 -#define LP_RX_TIMEOUT_REG 0xb014 -#define TURN_AROUND_TIMEOUT_REG 0xb018 -#define DEVICE_RESET_REG 0xb01C -#define DPI_RESOLUTION_REG 0xb020 -#define RES_V_POS 0x10 -#define DBI_RESOLUTION_REG 0xb024 /* Reserved for MDFLD */ -#define HORIZ_SYNC_PAD_COUNT_REG 0xb028 -#define HORIZ_BACK_PORCH_COUNT_REG 0xb02C -#define HORIZ_FRONT_PORCH_COUNT_REG 0xb030 -#define HORIZ_ACTIVE_AREA_COUNT_REG 0xb034 -#define VERT_SYNC_PAD_COUNT_REG 0xb038 -#define VERT_BACK_PORCH_COUNT_REG 0xb03c -#define VERT_FRONT_PORCH_COUNT_REG 0xb040 -#define HIGH_LOW_SWITCH_COUNT_REG 0xb044 -#define DPI_CONTROL_REG 0xb048 -#define DPI_SHUT_DOWN (1 << 0) -#define DPI_TURN_ON (1 << 1) -#define DPI_COLOR_MODE_ON (1 << 2) -#define DPI_COLOR_MODE_OFF (1 << 3) -#define DPI_BACK_LIGHT_ON (1 << 4) -#define DPI_BACK_LIGHT_OFF (1 << 5) -#define DPI_LP (1 << 6) -#define DPI_DATA_REG 0xb04c -#define DPI_BACK_LIGHT_ON_DATA 0x07 -#define DPI_BACK_LIGHT_OFF_DATA 0x17 -#define INIT_COUNT_REG 0xb050 -#define MAX_RET_PAK_REG 0xb054 -#define VIDEO_FMT_REG 0xb058 -#define COMPLETE_LAST_PCKT (1 << 2) -#define EOT_DISABLE_REG 0xb05c -#define ENABLE_CLOCK_STOPPING (1 << 1) -#define LP_BYTECLK_REG 0xb060 -#define LP_GEN_DATA_REG 0xb064 -#define HS_GEN_DATA_REG 0xb068 -#define LP_GEN_CTRL_REG 0xb06C -#define HS_GEN_CTRL_REG 0xb070 -#define DCS_CHANNEL_NUMBER_POS 0x6 -#define MCS_COMMANDS_POS 0x8 -#define WORD_COUNTS_POS 0x8 -#define MCS_PARAMETER_POS 0x10 -#define GEN_FIFO_STAT_REG 0xb074 -#define HS_DATA_FIFO_FULL (1 << 0) -#define HS_DATA_FIFO_HALF_EMPTY (1 << 1) -#define HS_DATA_FIFO_EMPTY (1 << 2) -#define LP_DATA_FIFO_FULL (1 << 8) -#define LP_DATA_FIFO_HALF_EMPTY (1 << 9) -#define LP_DATA_FIFO_EMPTY (1 << 10) -#define HS_CTRL_FIFO_FULL (1 << 16) -#define HS_CTRL_FIFO_HALF_EMPTY (1 << 17) -#define HS_CTRL_FIFO_EMPTY (1 << 18) -#define LP_CTRL_FIFO_FULL (1 << 24) -#define LP_CTRL_FIFO_HALF_EMPTY (1 << 25) -#define LP_CTRL_FIFO_EMPTY (1 << 26) -#define DBI_FIFO_EMPTY (1 << 27) -#define DPI_FIFO_EMPTY (1 << 28) -#define HS_LS_DBI_ENABLE_REG 0xb078 -#define TXCLKESC_REG 0xb07c -#define DPHY_PARAM_REG 0xb080 -#define DBI_BW_CTRL_REG 0xb084 -#define CLK_LANE_SWT_REG 0xb088 - -/* - * MIPI Adapter registers - */ -#define MIPI_CONTROL_REG 0xb104 -#define MIPI_2X_CLOCK_BITS ((1 << 0) | (1 << 1)) -#define MIPI_DATA_ADDRESS_REG 0xb108 -#define MIPI_DATA_LENGTH_REG 0xb10C -#define MIPI_COMMAND_ADDRESS_REG 0xb110 -#define MIPI_COMMAND_LENGTH_REG 0xb114 -#define MIPI_READ_DATA_RETURN_REG0 0xb118 -#define MIPI_READ_DATA_RETURN_REG1 0xb11C -#define MIPI_READ_DATA_RETURN_REG2 0xb120 -#define MIPI_READ_DATA_RETURN_REG3 0xb124 -#define MIPI_READ_DATA_RETURN_REG4 0xb128 -#define MIPI_READ_DATA_RETURN_REG5 0xb12C -#define MIPI_READ_DATA_RETURN_REG6 0xb130 -#define MIPI_READ_DATA_RETURN_REG7 0xb134 -#define MIPI_READ_DATA_VALID_REG 0xb138 - -/* DBI COMMANDS */ -#define soft_reset 0x01 -/* - * The display module performs a software reset. - * Registers are written with their SW Reset default values. - */ -#define get_power_mode 0x0a -/* - * The display module returns the current power mode - */ -#define get_address_mode 0x0b -/* - * The display module returns the current status. - */ -#define get_pixel_format 0x0c -/* - * This command gets the pixel format for the RGB image data - * used by the interface. - */ -#define get_display_mode 0x0d -/* - * The display module returns the Display Image Mode status. - */ -#define get_signal_mode 0x0e -/* - * The display module returns the Display Signal Mode. - */ -#define get_diagnostic_result 0x0f -/* - * The display module returns the self-diagnostic results following - * a Sleep Out command. - */ -#define enter_sleep_mode 0x10 -/* - * This command causes the display module to enter the Sleep mode. - * In this mode, all unnecessary blocks inside the display module are - * disabled except interface communication. This is the lowest power - * mode the display module supports. - */ -#define exit_sleep_mode 0x11 -/* - * This command causes the display module to exit Sleep mode. - * All blocks inside the display module are enabled. - */ -#define enter_partial_mode 0x12 -/* - * This command causes the display module to enter the Partial Display - * Mode. The Partial Display Mode window is described by the - * set_partial_area command. - */ -#define enter_normal_mode 0x13 -/* - * This command causes the display module to enter the Normal mode. - * Normal Mode is defined as Partial Display mode and Scroll mode are off - */ -#define exit_invert_mode 0x20 -/* - * This command causes the display module to stop inverting the image - * data on the display device. The frame memory contents remain unchanged. - * No status bits are changed. - */ -#define enter_invert_mode 0x21 -/* - * This command causes the display module to invert the image data only on - * the display device. The frame memory contents remain unchanged. - * No status bits are changed. - */ -#define set_gamma_curve 0x26 -/* - * This command selects the desired gamma curve for the display device. - * Four fixed gamma curves are defined in section DCS spec. - */ -#define set_display_off 0x28 -/* ************************************************************************* *\ -This command causes the display module to stop displaying the image data -on the display device. The frame memory contents remain unchanged. -No status bits are changed. -\* ************************************************************************* */ -#define set_display_on 0x29 -/* ************************************************************************* *\ -This command causes the display module to start displaying the image data -on the display device. The frame memory contents remain unchanged. -No status bits are changed. -\* ************************************************************************* */ -#define set_column_address 0x2a -/* - * This command defines the column extent of the frame memory accessed by - * the hostprocessor with the read_memory_continue and - * write_memory_continue commands. - * No status bits are changed. - */ -#define set_page_addr 0x2b -/* - * This command defines the page extent of the frame memory accessed by - * the host processor with the write_memory_continue and - * read_memory_continue command. - * No status bits are changed. - */ -#define write_mem_start 0x2c -/* - * This command transfers image data from the host processor to the - * display modules frame memory starting at the pixel location specified - * by preceding set_column_address and set_page_address commands. - */ -#define set_partial_area 0x30 -/* - * This command defines the Partial Display mode s display area. - * There are two parameters associated with this command, the first - * defines the Start Row (SR) and the second the End Row (ER). SR and ER - * refer to the Frame Memory Line Pointer. - */ -#define set_scroll_area 0x33 -/* - * This command defines the display modules Vertical Scrolling Area. - */ -#define set_tear_off 0x34 -/* - * This command turns off the display modules Tearing Effect output - * signal on the TE signal line. - */ -#define set_tear_on 0x35 -/* - * This command turns on the display modules Tearing Effect output signal - * on the TE signal line. - */ -#define set_address_mode 0x36 -/* - * This command sets the data order for transfers from the host processor - * to display modules frame memory,bits B[7:5] and B3, and from the - * display modules frame memory to the display device, bits B[2:0] and B4. - */ -#define set_scroll_start 0x37 -/* - * This command sets the start of the vertical scrolling area in the frame - * memory. The vertical scrolling area is fully defined when this command - * is used with the set_scroll_area command The set_scroll_start command - * has one parameter, the Vertical Scroll Pointer. The VSP defines the - * line in the frame memory that is written to the display device as the - * first line of the vertical scroll area. - */ -#define exit_idle_mode 0x38 -/* - * This command causes the display module to exit Idle mode. - */ -#define enter_idle_mode 0x39 -/* - * This command causes the display module to enter Idle Mode. - * In Idle Mode, color expression is reduced. Colors are shown on the - * display device using the MSB of each of the R, G and B color - * components in the frame memory - */ -#define set_pixel_format 0x3a -/* - * This command sets the pixel format for the RGB image data used by the - * interface. - * Bits D[6:4] DPI Pixel Format Definition - * Bits D[2:0] DBI Pixel Format Definition - * Bits D7 and D3 are not used. - */ -#define DCS_PIXEL_FORMAT_3bpp 0x1 -#define DCS_PIXEL_FORMAT_8bpp 0x2 -#define DCS_PIXEL_FORMAT_12bpp 0x3 -#define DCS_PIXEL_FORMAT_16bpp 0x5 -#define DCS_PIXEL_FORMAT_18bpp 0x6 -#define DCS_PIXEL_FORMAT_24bpp 0x7 - -#define write_mem_cont 0x3c - -/* - * This command transfers image data from the host processor to the - * display module's frame memory continuing from the pixel location - * following the previous write_memory_continue or write_memory_start - * command. - */ -#define set_tear_scanline 0x44 -/* - * This command turns on the display modules Tearing Effect output signal - * on the TE signal line when the display module reaches line N. - */ -#define get_scanline 0x45 -/* - * The display module returns the current scanline, N, used to update the - * display device. The total number of scanlines on a display device is - * defined as VSYNC + VBP + VACT + VFP.The first scanline is defined as - * the first line of V Sync and is denoted as Line 0. - * When in Sleep Mode, the value returned by get_scanline is undefined. - */ - -/* MCS or Generic COMMANDS */ -/* MCS/generic data type */ -#define GEN_SHORT_WRITE_0 0x03 /* generic short write, no parameters */ -#define GEN_SHORT_WRITE_1 0x13 /* generic short write, 1 parameters */ -#define GEN_SHORT_WRITE_2 0x23 /* generic short write, 2 parameters */ -#define GEN_READ_0 0x04 /* generic read, no parameters */ -#define GEN_READ_1 0x14 /* generic read, 1 parameters */ -#define GEN_READ_2 0x24 /* generic read, 2 parameters */ -#define GEN_LONG_WRITE 0x29 /* generic long write */ -#define MCS_SHORT_WRITE_0 0x05 /* MCS short write, no parameters */ -#define MCS_SHORT_WRITE_1 0x15 /* MCS short write, 1 parameters */ -#define MCS_READ 0x06 /* MCS read, no parameters */ -#define MCS_LONG_WRITE 0x39 /* MCS long write */ -/* MCS/generic commands */ -/* TPO MCS */ -#define write_display_profile 0x50 -#define write_display_brightness 0x51 -#define write_ctrl_display 0x53 -#define write_ctrl_cabc 0x55 - #define UI_IMAGE 0x01 - #define STILL_IMAGE 0x02 - #define MOVING_IMAGE 0x03 -#define write_hysteresis 0x57 -#define write_gamma_setting 0x58 -#define write_cabc_min_bright 0x5e -#define write_kbbc_profile 0x60 -/* TMD MCS */ -#define tmd_write_display_brightness 0x8c - -/* - * This command is used to control ambient light, panel backlight - * brightness and gamma settings. - */ -#define BRIGHT_CNTL_BLOCK_ON (1 << 5) -#define AMBIENT_LIGHT_SENSE_ON (1 << 4) -#define DISPLAY_DIMMING_ON (1 << 3) -#define BACKLIGHT_ON (1 << 2) -#define DISPLAY_BRIGHTNESS_AUTO (1 << 1) -#define GAMMA_AUTO (1 << 0) - -/* DCS Interface Pixel Formats */ -#define DCS_PIXEL_FORMAT_3BPP 0x1 -#define DCS_PIXEL_FORMAT_8BPP 0x2 -#define DCS_PIXEL_FORMAT_12BPP 0x3 -#define DCS_PIXEL_FORMAT_16BPP 0x5 -#define DCS_PIXEL_FORMAT_18BPP 0x6 -#define DCS_PIXEL_FORMAT_24BPP 0x7 -/* ONE PARAMETER READ DATA */ -#define addr_mode_data 0xfc -#define diag_res_data 0x00 -#define disp_mode_data 0x23 -#define pxl_fmt_data 0x77 -#define pwr_mode_data 0x74 -#define sig_mode_data 0x00 -/* TWO PARAMETERS READ DATA */ -#define scanline_data1 0xff -#define scanline_data2 0xff -#define NON_BURST_MODE_SYNC_PULSE 0x01 /* Non Burst Mode - * with Sync Pulse - */ -#define NON_BURST_MODE_SYNC_EVENTS 0x02 /* Non Burst Mode - * with Sync events - */ -#define BURST_MODE 0x03 /* Burst Mode */ -#define DBI_COMMAND_BUFFER_SIZE 0x240 /* 0x32 */ /* 0x120 */ - /* Allocate at least - * 0x100 Byte with 32 - * byte alignment - */ -#define DBI_DATA_BUFFER_SIZE 0x120 /* Allocate at least - * 0x100 Byte with 32 - * byte alignment - */ -#define DBI_CB_TIME_OUT 0xFFFF - -#define GEN_FB_TIME_OUT 2000 - -#define SKU_83 0x01 -#define SKU_100 0x02 -#define SKU_100L 0x04 -#define SKU_BYPASS 0x08 - -/* Some handy macros for playing with bitfields. */ -#define PSB_MASK(high, low) (((1<<((high)-(low)+1))-1)<<(low)) -#define SET_FIELD(value, field) (((value) << field ## _SHIFT) & field ## _MASK) -#define GET_FIELD(word, field) (((word) & field ## _MASK) >> field ## _SHIFT) - -#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) - -/* PCI config space */ - -#define SB_PCKT 0x02100 /* cedarview */ -# define SB_OPCODE_MASK PSB_MASK(31, 16) -# define SB_OPCODE_SHIFT 16 -# define SB_OPCODE_READ 0 -# define SB_OPCODE_WRITE 1 -# define SB_DEST_MASK PSB_MASK(15, 8) -# define SB_DEST_SHIFT 8 -# define SB_DEST_DPLL 0x88 -# define SB_BYTE_ENABLE_MASK PSB_MASK(7, 4) -# define SB_BYTE_ENABLE_SHIFT 4 -# define SB_BUSY (1 << 0) - - -/* 32-bit value read/written from the DPIO reg. */ -#define SB_DATA 0x02104 /* cedarview */ -/* 32-bit address of the DPIO reg to be read/written. */ -#define SB_ADDR 0x02108 /* cedarview */ -#define DPIO_CFG 0x02110 /* cedarview */ -# define DPIO_MODE_SELECT_1 (1 << 3) -# define DPIO_MODE_SELECT_0 (1 << 2) -# define DPIO_SFR_BYPASS (1 << 1) -/* reset is active low */ -# define DPIO_CMN_RESET_N (1 << 0) - -/* Cedarview sideband registers */ -#define _SB_M_A 0x8008 -#define _SB_M_B 0x8028 -#define SB_M(pipe) _PIPE(pipe, _SB_M_A, _SB_M_B) -# define SB_M_DIVIDER_MASK (0xFF << 24) -# define SB_M_DIVIDER_SHIFT 24 - -#define _SB_N_VCO_A 0x8014 -#define _SB_N_VCO_B 0x8034 -#define SB_N_VCO(pipe) _PIPE(pipe, _SB_N_VCO_A, _SB_N_VCO_B) -#define SB_N_VCO_SEL_MASK PSB_MASK(31, 30) -#define SB_N_VCO_SEL_SHIFT 30 -#define SB_N_DIVIDER_MASK PSB_MASK(29, 26) -#define SB_N_DIVIDER_SHIFT 26 -#define SB_N_CB_TUNE_MASK PSB_MASK(25, 24) -#define SB_N_CB_TUNE_SHIFT 24 - -#define _SB_REF_A 0x8018 -#define _SB_REF_B 0x8038 -#define SB_REF_SFR(pipe) _PIPE(pipe, _SB_REF_A, _SB_REF_B) - -#define _SB_P_A 0x801c -#define _SB_P_B 0x803c -#define SB_P(pipe) _PIPE(pipe, _SB_P_A, _SB_P_B) -#define SB_P2_DIVIDER_MASK PSB_MASK(31, 30) -#define SB_P2_DIVIDER_SHIFT 30 -#define SB_P2_10 0 /* HDMI, DP, DAC */ -#define SB_P2_5 1 /* DAC */ -#define SB_P2_14 2 /* LVDS single */ -#define SB_P2_7 3 /* LVDS double */ -#define SB_P1_DIVIDER_MASK PSB_MASK(15, 12) -#define SB_P1_DIVIDER_SHIFT 12 - -#define PSB_LANE0 0x120 -#define PSB_LANE1 0x220 -#define PSB_LANE2 0x2320 -#define PSB_LANE3 0x2420 - -#define LANE_PLL_MASK (0x7 << 20) -#define LANE_PLL_ENABLE (0x3 << 20) - - -#endif |