diff options
Diffstat (limited to 'drivers/staging/rtl8187se/r8185b_init.c')
-rw-r--r-- | drivers/staging/rtl8187se/r8185b_init.c | 1329 |
1 files changed, 595 insertions, 734 deletions
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index 4b0b830f9ab..914495783c0 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -1,22 +1,22 @@ -/*++ -Copyright (c) Realtek Semiconductor Corp. All rights reserved. - -Module Name: - r8185b_init.c - -Abstract: - Hardware Initialization and Hardware IO for RTL8185B - -Major Change History: - When Who What - ---------- --------------- ------------------------------- - 2006-11-15 Xiong Created - -Notes: - This file is ported from RTL8185B Windows driver. - - ---*/ +/* + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * Module Name: + * r8185b_init.c + * + * Abstract: + * Hardware Initialization and Hardware IO for RTL8185B + * + * Major Change History: + * When Who What + * ---------- --------------- ------------------------------- + * 2006-11-15 Xiong Created + * + * Notes: + * This file is ported from RTL8185B Windows driver. + * + * + */ /*--------------------------Include File------------------------------------*/ #include <linux/spinlock.h> @@ -25,155 +25,134 @@ Notes: #include "r8180_rtl8225.h" /* RTL8225 Radio frontend */ #include "r8180_93cx6.h" /* Card EEPROM */ #include "r8180_wx.h" - #include "ieee80211/dot11d.h" - - /* #define CONFIG_RTL8180_IO_MAP */ - #define TC_3W_POLL_MAX_TRY_CNT 5 + static u8 MAC_REG_TABLE[][2] = { - /*PAGA 0: */ - /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */ - /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */ - /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */ - {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42}, - {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03}, - {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03}, - {0x94, 0x0F}, {0x95, 0x32}, - {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00}, - {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32}, - {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4}, - {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00}, - {0xff, 0x00}, - - /*PAGE 1: */ - /* For Flextronics system Logo PCIHCT failure: */ - /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */ - {0x5e, 0x01}, - {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24}, - {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF}, - {0x82, 0xFF}, {0x83, 0x03}, - {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */ - {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},/* lzm add 080826 */ - {0xe2, 0x00}, - - - /* PAGE 2: */ - {0x5e, 0x02}, - {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5}, - {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff}, - {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08}, - {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f}, - {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f}, - {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff}, - {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00}, - - /* PAGA 0: */ - {0x5e, 0x00}, {0x9f, 0x03} - }; - - -static u8 ZEBRA_AGC[] = { - 0, - 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, - 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, - 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, - 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, - 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, - 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, - 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F - }; - -static u32 ZEBRA_RF_RX_GAIN_TABLE[] = { - 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, - 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, - 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, - 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, - 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 + /*PAGA 0: */ + /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */ + /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */ + /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */ + {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42}, + {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03}, + {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03}, + {0x94, 0x0F}, {0x95, 0x32}, + {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00}, + {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32}, + {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4}, + {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00}, + {0xff, 0x00}, + + /*PAGE 1: */ + /* For Flextronics system Logo PCIHCT failure: */ + /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */ + {0x5e, 0x01}, + {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24}, + {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF}, + {0x82, 0xFF}, {0x83, 0x03}, + {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */ + {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */ + {0xe2, 0x00}, + + + /* PAGE 2: */ + {0x5e, 0x02}, + {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5}, + {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff}, + {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08}, + {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f}, + {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f}, + {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff}, + {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00}, + + /* PAGA 0: */ + {0x5e, 0x00}, {0x9f, 0x03} + }; + + +static u8 ZEBRA_AGC[] = { + 0, + 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, + 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, + 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, + 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, + 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, + 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, + 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F + }; + +static u32 ZEBRA_RF_RX_GAIN_TABLE[] = { + 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, + 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, + 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, + 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, + 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 }; -static u8 OFDM_CONFIG[] = { - /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */ - /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */ - /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */ - - /* 0x00 */ - 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, - 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, - /* 0x10 */ - 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, - 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, - /* 0x20 */ - 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, - 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, - /* 0x30 */ - 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, - 0xD8, 0x3C, 0x7B, 0x10, 0x10 - }; - -/* --------------------------------------------------------------- - * Hardware IO - * the code is ported from Windows source code - ----------------------------------------------------------------*/ - -void -PlatformIOWrite1Byte( - struct net_device *dev, - u32 offset, - u8 data - ) +static u8 OFDM_CONFIG[] = { + /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */ + /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */ + /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */ + /* 0x00 */ + 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, + 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, + /* 0x10 */ + 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, + 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, + /* 0x20 */ + 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, + 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, + /* 0x30 */ + 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, + 0xD8, 0x3C, 0x7B, 0x10, 0x10 + }; + + /*--------------------------------------------------------------- + * Hardware IO + * the code is ported from Windows source code + *--------------------------------------------------------------- + */ + +void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data) { write_nic_byte(dev, offset, data); - read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ - + read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ } -void -PlatformIOWrite2Byte( - struct net_device *dev, - u32 offset, - u16 data - ) +void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data) { write_nic_word(dev, offset, data); read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ - - } + u8 PlatformIORead1Byte(struct net_device *dev, u32 offset); -void -PlatformIOWrite4Byte( - struct net_device *dev, - u32 offset, - u32 data - ) +void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data) { -/* {by amy 080312 */ -if (offset == PhyAddr) { -/* For Base Band configuration. */ + if (offset == PhyAddr) { + /* For Base Band configuration. */ unsigned char cmdByte; unsigned long dataBytes; unsigned char idx; - u8 u1bTmp; + u8 u1bTmp; cmdByte = (u8)(data & 0x000000ff); dataBytes = data>>8; /* - 071010, rcnjko: - The critical section is only BB read/write race condition. - Assumption: - 1. We assume NO one will access BB at DIRQL, otherwise, system will crash for - acquiring the spinlock in such context. - 2. PlatformIOWrite4Byte() MUST NOT be recursive. - */ -/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */ - - for (idx = 0; idx < 30; idx++) { - /* Make sure command bit is clear before access it. */ + * 071010, rcnjko: + * The critical section is only BB read/write race condition. + * Assumption: + * 1. We assume NO one will access BB at DIRQL, otherwise, system will crash for + * acquiring the spinlock in such context. + * 2. PlatformIOWrite4Byte() MUST NOT be recursive. + */ + /* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */ + + for (idx = 0; idx < 30; idx++) { + /* Make sure command bit is clear before access it. */ u1bTmp = PlatformIORead1Byte(dev, PhyAddr); if ((u1bTmp & BIT7) == 0) break; @@ -186,20 +165,14 @@ if (offset == PhyAddr) { write_nic_byte(dev, offset, cmdByte); -/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */ - } -/* by amy 080312} */ - else { + /* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */ + } else { write_nic_dword(dev, offset, data); read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ } } -u8 -PlatformIORead1Byte( - struct net_device *dev, - u32 offset - ) +u8 PlatformIORead1Byte(struct net_device *dev, u32 offset) { u8 data = 0; @@ -209,11 +182,7 @@ PlatformIORead1Byte( return data; } -u16 -PlatformIORead2Byte( - struct net_device *dev, - u32 offset - ) +u16 PlatformIORead2Byte(struct net_device *dev, u32 offset) { u16 data = 0; @@ -223,11 +192,7 @@ PlatformIORead2Byte( return data; } -u32 -PlatformIORead4Byte( - struct net_device *dev, - u32 offset - ) +u32 PlatformIORead4Byte(struct net_device *dev, u32 offset) { u32 data = 0; @@ -242,22 +207,19 @@ void SetOutputEnableOfRfPins(struct net_device *dev) write_nic_word(dev, RFPinsEnable, 0x1bff); } -static int -HwHSSIThreeWire( - struct net_device *dev, - u8 *pDataBuf, - u8 nDataBufBitCnt, - int bSI, - int bWrite - ) +static int HwHSSIThreeWire(struct net_device *dev, + u8 *pDataBuf, + u8 nDataBufBitCnt, + int bSI, + int bWrite) { int bResult = 1; u8 TryCnt; u8 u1bTmp; - do { + do { /* Check if WE and RE are cleared. */ - for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { + for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { u1bTmp = read_nic_byte(dev, SW_3W_CMD1); if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0) break; @@ -275,15 +237,15 @@ HwHSSIThreeWire( u1bTmp = read_nic_byte(dev, RF_SW_CONFIG); if (bSI) - u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */ + u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */ else - u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */ + u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */ write_nic_byte(dev, RF_SW_CONFIG, u1bTmp); - if (bSI) { + if (bSI) { /* jong: HW SI read must set reg84[3]=0. */ u1bTmp = read_nic_byte(dev, RFPinsSelect); u1bTmp &= ~BIT3; @@ -291,14 +253,14 @@ HwHSSIThreeWire( } /* Fill up data buffer for write operation. */ - if (bWrite) { - if (nDataBufBitCnt == 16) { + if (bWrite) { + if (nDataBufBitCnt == 16) { write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); - } else if (nDataBufBitCnt == 64) { + } else if (nDataBufBitCnt == 64) { /* RTL8187S shouldn't enter this case */ write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf)); write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4))); - } else { + } else { int idx; int ByteCnt = nDataBufBitCnt / 8; /* printk("%d\n",nDataBufBitCnt); */ @@ -324,11 +286,11 @@ HwHSSIThreeWire( write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx)); } - } else { /* read */ - if (bSI) { - /* SI - reg274[3:0] : RF register's Address */ + } else { /* read */ + if (bSI) { + /* SI - reg274[3:0] : RF register's Address */ write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); - } else { + } else { /* PI - reg274[15:12] : RF register's Address */ write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12); } @@ -343,7 +305,7 @@ HwHSSIThreeWire( /* Check if DONE is set. */ - for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { + for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { u1bTmp = read_nic_byte(dev, SW_3W_CMD1); if ((u1bTmp & SW_3W_CMD1_DONE) != 0) break; @@ -353,12 +315,12 @@ HwHSSIThreeWire( write_nic_byte(dev, SW_3W_CMD1, 0); - /* Read back data for read operation. */ - if (bWrite == 0) { - if (bSI) { + /* Read back data for read operation. */ + if (bWrite == 0) { + if (bSI) { /* Serial Interface : reg363_362[11:0] */ *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ; - } else { + } else { /* Parallel Interface : reg361_360[11:0] */ *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ); } @@ -366,13 +328,12 @@ HwHSSIThreeWire( *((u16 *)pDataBuf) &= 0x0FFF; } - } while (0); + } while (0); return bResult; } -void -RF_WriteReg(struct net_device *dev, u8 offset, u32 data) +void RF_WriteReg(struct net_device *dev, u8 offset, u32 data) { u32 data2Write; u8 len; @@ -400,11 +361,7 @@ u32 RF_ReadReg(struct net_device *dev, u8 offset) /* by Owen on 04/07/14 for writing BB register successfully */ -void -WriteBBPortUchar( - struct net_device *dev, - u32 Data - ) +void WriteBBPortUchar(struct net_device *dev, u32 Data) { /* u8 TimeoutCounter; */ u8 RegisterContent; @@ -421,11 +378,7 @@ WriteBBPortUchar( } } -u8 -ReadBBPortUchar( - struct net_device *dev, - u32 addr - ) +u8 ReadBBPortUchar(struct net_device *dev, u32 addr) { /*u8 TimeoutCounter; */ u8 RegisterContent; @@ -435,66 +388,62 @@ ReadBBPortUchar( return RegisterContent; } -/* {by amy 080312 */ /* - Description: - Perform Antenna settings with antenna diversity on 87SE. - Created by Roger, 2008.01.25. -*/ -bool -SetAntennaConfig87SE( - struct net_device *dev, - u8 DefaultAnt, /* 0: Main, 1: Aux. */ - bool bAntDiversity /* 1:Enable, 0: Disable. */ -) + * Description: + * Perform Antenna settings with antenna diversity on 87SE. + * Created by Roger, 2008.01.25. + */ +bool SetAntennaConfig87SE(struct net_device *dev, + u8 DefaultAnt, /* 0: Main, 1: Aux. */ + bool bAntDiversity) /* 1:Enable, 0: Disable. */ { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); bool bAntennaSwitched = true; /* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */ - /* Threshold for antenna diversity. */ + /* Threshold for antenna diversity. */ write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */ - if (bAntDiversity) { /* Enable Antenna Diversity. */ - if (DefaultAnt == 1) { /* aux antenna */ + if (bAntDiversity) { /* Enable Antenna Diversity. */ + if (DefaultAnt == 1) { /* aux antenna */ - /* Mac register, aux antenna */ + /* Mac register, aux antenna */ write_nic_byte(dev, ANTSEL, 0x00); - /* Config CCK RX antenna. */ + /* Config CCK RX antenna. */ write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ - /* Config OFDM RX antenna. */ - write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ - write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ - } else { /* use main antenna */ - /* Mac register, main antenna */ + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ + write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ + } else { /* use main antenna */ + /* Mac register, main antenna */ write_nic_byte(dev, ANTSEL, 0x03); - /* base band */ - /* Config CCK RX antenna. */ - write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ - write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ + /* base band */ + /* Config CCK RX antenna. */ + write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ + write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ /* Config OFDM RX antenna. */ write_phy_ofdm(dev, 0x0d, 0x5c); /* Reg0d : 5c */ write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ } - } else { + } else { /* Disable Antenna Diversity. */ - if (DefaultAnt == 1) { /* aux Antenna */ + if (DefaultAnt == 1) { /* aux Antenna */ /* Mac register, aux antenna */ write_nic_byte(dev, ANTSEL, 0x00); /* Config CCK RX antenna. */ - write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ - write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ + write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ + write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ /* Config OFDM RX antenna. */ - write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ - write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */ - } else { /* main Antenna */ + write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ + write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */ + } else { /* main Antenna */ /* Mac register, main antenna */ write_nic_byte(dev, ANTSEL, 0x03); @@ -502,25 +451,22 @@ SetAntennaConfig87SE( write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ - /* Config OFDM RX antenna. */ - write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */ - write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */ + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */ + write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */ } } priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */ return bAntennaSwitched; } -/* by amy 080312 */ /* ---------------------------------------------------------------- - * Hardware Initialization. - * the code is ported from Windows source code -----------------------------------------------------------------*/ - -void -ZEBRA_Config_85BASIC_HardCode( - struct net_device *dev - ) + *-------------------------------------------------------------- + * Hardware Initialization. + * the code is ported from Windows source code + *-------------------------------------------------------------- + */ + +void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); @@ -532,163 +478,151 @@ ZEBRA_Config_85BASIC_HardCode( /* -============================================================================= - 87S_PCIE :: RADIOCFG.TXT -============================================================================= -*/ + *=========================================================================== + * 87S_PCIE :: RADIOCFG.TXT + *=========================================================================== + */ /* Page1 : reg16-reg30 */ - RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */ - u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1); - u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1); + RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */ + u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1); + u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1); if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) { d_cut = 1; printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n"); } - /* Page0 : reg0-reg15 */ - - RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */ - - RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1); - - RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */ - - RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */ - - RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); - RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1); - RF_WriteReg(dev, 0x06, 0x0ae6); mdelay(1); - RF_WriteReg(dev, 0x07, 0x00ca); mdelay(1); - RF_WriteReg(dev, 0x08, 0x0e1c); mdelay(1); - RF_WriteReg(dev, 0x09, 0x02f0); mdelay(1); - RF_WriteReg(dev, 0x0a, 0x09d0); mdelay(1); - RF_WriteReg(dev, 0x0b, 0x01ba); mdelay(1); - RF_WriteReg(dev, 0x0c, 0x0640); mdelay(1); - RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0020); mdelay(1); - RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1); - + /* Page0 : reg0-reg15 */ + + RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */ + RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1); + RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */ + RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */ + RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); + RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1); + RF_WriteReg(dev, 0x06, 0x0ae6); mdelay(1); + RF_WriteReg(dev, 0x07, 0x00ca); mdelay(1); + RF_WriteReg(dev, 0x08, 0x0e1c); mdelay(1); + RF_WriteReg(dev, 0x09, 0x02f0); mdelay(1); + RF_WriteReg(dev, 0x0a, 0x09d0); mdelay(1); + RF_WriteReg(dev, 0x0b, 0x01ba); mdelay(1); + RF_WriteReg(dev, 0x0c, 0x0640); mdelay(1); + RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); + RF_WriteReg(dev, 0x0e, 0x0020); mdelay(1); + RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1); /* Page1 : reg16-reg30 */ - RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); - - RF_WriteReg(dev, 0x03, 0x0806); mdelay(1); - - RF_WriteReg(dev, 0x04, 0x03a7); mdelay(1); - RF_WriteReg(dev, 0x05, 0x059b); mdelay(1); - RF_WriteReg(dev, 0x06, 0x0081); mdelay(1); - - - RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1); + RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); + RF_WriteReg(dev, 0x03, 0x0806); mdelay(1); + RF_WriteReg(dev, 0x04, 0x03a7); mdelay(1); + RF_WriteReg(dev, 0x05, 0x059b); mdelay(1); + RF_WriteReg(dev, 0x06, 0x0081); mdelay(1); + RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1); /* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */ - RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); - RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1); + RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); + RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1); if (d_cut) { - RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); - RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */ - } else { - RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); - RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */ + RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); + RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); + RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */ + } else { + RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); + RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); + RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */ } - RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); - - RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */ + RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); + RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */ + RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1); + RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1); - RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1); - RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1); - for (i = 0; i <= 36; i++) { - RF_WriteReg(dev, 0x01, i); mdelay(1); + for (i = 0; i <= 36; i++) { + RF_WriteReg(dev, 0x01, i); mdelay(1); RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1); } - RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */ - RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */ + RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */ + RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */ + RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */ + mdelay(200); /* Deay 200 ms. */ /* 0xfd */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */ - mdelay(200); /* Deay 200 ms. */ /* 0xfd */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */ - mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - - RF_WriteReg(dev, 0x07, 0x0000); mdelay(1); - RF_WriteReg(dev, 0x07, 0x0180); mdelay(1); - RF_WriteReg(dev, 0x07, 0x0220); mdelay(1); - RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1); + RF_WriteReg(dev, 0x07, 0x0000); mdelay(1); + RF_WriteReg(dev, 0x07, 0x0180); mdelay(1); + RF_WriteReg(dev, 0x07, 0x0220); mdelay(1); + RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1); /* DAC calibration off 20070702 */ - RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1); - RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); -/* {by amy 080312 */ + RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1); + RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); /* For crystal calibration, added by Roger, 2007.12.11. */ - if (priv->bXtalCalibration) { /* reg 30. */ - /* enable crystal calibration. - RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0]. - (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0 - (3)RF signal on/off when calibration[13], default: on, set BIT13=0. - So we should minus 4 BITs offset. */ - RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1); + if (priv->bXtalCalibration) { /* reg 30. */ + /* + * enable crystal calibration. + * RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0]. + * (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0 + * (3)RF signal on/off when calibration[13], default: on, set BIT13=0. + * So we should minus 4 BITs offset. + */ + RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1); printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n", - (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); - } else { + (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); + } else { /* using default value. Xin=6, Xout=6. */ - RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); + RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); } -/* by amy 080312 */ - RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */ - RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */ - RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */ - RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */ + RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */ + RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */ + RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */ + RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ - RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */ - RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */ - RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */ - - RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ - RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ - /* power save parameters. */ + RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ + /* power save parameters. */ u1b24E = read_nic_byte(dev, 0x24E); write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6)))); /*============================================================================= - - ============================================================================= - CCKCONF.TXT - ============================================================================= - */ - /* [POWER SAVE] Power Saving Parameters by jong. 2007-11-27 - CCK reg0x00[7]=1'b1 :power saving for TX (default) - CCK reg0x00[6]=1'b1: power saving for RX (default) - CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation. - CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1 - CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0 - */ + * + *=========================================================================== + * CCKCONF.TXT + *=========================================================================== + * + * [POWER SAVE] Power Saving Parameters by jong. 2007-11-27 + * CCK reg0x00[7]=1'b1 :power saving for TX (default) + * CCK reg0x00[6]=1'b1: power saving for RX (default) + * CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation. + * CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1 + * CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0 + */ write_phy_cck(dev, 0x00, 0xc8); write_phy_cck(dev, 0x06, 0x1c); @@ -697,7 +631,7 @@ ZEBRA_Config_85BASIC_HardCode( write_phy_cck(dev, 0x2f, 0x06); write_phy_cck(dev, 0x01, 0x46); - /* power control */ + /* power control */ write_nic_byte(dev, CCK_TXAGC, 0x10); write_nic_byte(dev, OFDM_TXAGC, 0x1B); write_nic_byte(dev, ANTSEL, 0x03); @@ -705,14 +639,14 @@ ZEBRA_Config_85BASIC_HardCode( /* - ============================================================================= - AGC.txt - ============================================================================= - */ + *=========================================================================== + * AGC.txt + *=========================================================================== + */ write_phy_ofdm(dev, 0x00, 0x12); - for (i = 0; i < 128; i++) { + for (i = 0; i < 128; i++) { data = ZEBRA_AGC[i+1]; data = data << 8; @@ -730,49 +664,43 @@ ZEBRA_Config_85BASIC_HardCode( PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080); /* Annie, 2006-05-05 */ /* - ============================================================================= - - ============================================================================= - OFDMCONF.TXT - ============================================================================= - */ - - for (i = 0; i < 60; i++) { + *=========================================================================== + * + *=========================================================================== + * OFDMCONF.TXT + *=========================================================================== + */ + + for (i = 0; i < 60; i++) { u4bRegOffset = i; u4bRegValue = OFDM_CONFIG[i]; WriteBBPortUchar(dev, - (0x00000080 | - (u4bRegOffset & 0x7f) | - ((u4bRegValue & 0xff) << 8))); + (0x00000080 | + (u4bRegOffset & 0x7f) | + ((u4bRegValue & 0xff) << 8))); } /* - ============================================================================= - by amy for antenna - ============================================================================= - */ -/* {by amy 080312 */ + *=========================================================================== + * by amy for antenna + *=========================================================================== + */ /* Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26. */ SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity); -/* by amy 080312} */ -/* by amy for antenna */ } -void -UpdateInitialGain( - struct net_device *dev - ) +void UpdateInitialGain(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* lzm add 080826 */ - if (priv->eRFPowerState != eRfOn) { + if (priv->eRFPowerState != eRfOn) { /* Don't access BB/RF under disable PLL situation. - RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n")); - Back to the original state - */ + * RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n")); + * Back to the original state + */ priv->InitialGain = priv->InitialGainBackUp; return; } @@ -826,7 +754,7 @@ UpdateInitialGain( write_phy_ofdm(dev, 0x05, 0xfc); mdelay(1); break; - default: /* MP */ + default: /* MP */ write_phy_ofdm(dev, 0x17, 0x26); mdelay(1); write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); write_phy_ofdm(dev, 0x05, 0xfa); mdelay(1); @@ -834,14 +762,11 @@ UpdateInitialGain( } } /* - Description: - Tx Power tracking mechanism routine on 87SE. - Created by Roger, 2007.12.11. -*/ -void -InitTxPwrTracking87SE( - struct net_device *dev -) + * Description: + * Tx Power tracking mechanism routine on 87SE. + * Created by Roger, 2007.12.11. + */ +void InitTxPwrTracking87SE(struct net_device *dev) { u32 u4bRfReg; @@ -851,49 +776,41 @@ InitTxPwrTracking87SE( RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN); mdelay(1); } -void -PhyConfig8185( - struct net_device *dev - ) +void PhyConfig8185(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); write_nic_dword(dev, RCR, priv->ReceiveConfig); priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03; /* RF config */ ZEBRA_Config_85BASIC_HardCode(dev); -/* {by amy 080312 */ /* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */ - if (priv->bDigMechanism) { + if (priv->bDigMechanism) { if (priv->InitialGain == 0) priv->InitialGain = 4; } /* - Enable thermal meter indication to implement TxPower tracking on 87SE. - We initialize thermal meter here to avoid unsuccessful configuration. - Added by Roger, 2007.12.11. - */ + * Enable thermal meter indication to implement TxPower tracking on 87SE. + * We initialize thermal meter here to avoid unsuccessful configuration. + * Added by Roger, 2007.12.11. + */ if (priv->bTxPowerTrack) InitTxPwrTracking87SE(dev); -/* by amy 080312} */ priv->InitialGainBackUp = priv->InitialGain; UpdateInitialGain(dev); return; } -void -HwConfigureRTL8185( - struct net_device *dev - ) +void HwConfigureRTL8185(struct net_device *dev) { /* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */ - u8 bUNIVERSAL_CONTROL_RL = 0; - u8 bUNIVERSAL_CONTROL_AGC = 1; - u8 bUNIVERSAL_CONTROL_ANT = 1; - u8 bAUTO_RATE_FALLBACK_CTL = 1; - u8 val8; + u8 bUNIVERSAL_CONTROL_RL = 0; + u8 bUNIVERSAL_CONTROL_AGC = 1; + u8 bUNIVERSAL_CONTROL_ANT = 1; + u8 bAUTO_RATE_FALLBACK_CTL = 1; + u8 val8; write_nic_word(dev, BRSR, 0x0fff); /* Retry limit */ val8 = read_nic_byte(dev, CW_CONF); @@ -907,24 +824,24 @@ HwConfigureRTL8185( /* Tx AGC */ val8 = read_nic_byte(dev, TXAGC_CTL); - if (bUNIVERSAL_CONTROL_AGC) { + if (bUNIVERSAL_CONTROL_AGC) { write_nic_byte(dev, CCK_TXAGC, 128); write_nic_byte(dev, OFDM_TXAGC, 128); val8 = val8 & 0xfe; - } else { + } else { val8 = val8 | 0x01 ; } write_nic_byte(dev, TXAGC_CTL, val8); - /* Tx Antenna including Feedback control */ + /* Tx Antenna including Feedback control */ val8 = read_nic_byte(dev, TXAGC_CTL); - if (bUNIVERSAL_CONTROL_ANT) { + if (bUNIVERSAL_CONTROL_ANT) { write_nic_byte(dev, ANTSEL, 0x00); val8 = val8 & 0xfd; - } else { + } else { val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */ } @@ -933,7 +850,7 @@ HwConfigureRTL8185( /* Auto Rate fallback control */ val8 = read_nic_byte(dev, RATE_FALLBACK); val8 &= 0x7c; - if (bAUTO_RATE_FALLBACK_CTL) { + if (bAUTO_RATE_FALLBACK_CTL) { val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1; /* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */ @@ -942,40 +859,34 @@ HwConfigureRTL8185( write_nic_byte(dev, RATE_FALLBACK, val8); } -static void -MacConfig_85BASIC_HardCode( - struct net_device *dev) +static void MacConfig_85BASIC_HardCode(struct net_device *dev) { /* - ============================================================================ - MACREG.TXT - ============================================================================ - */ - int nLinesRead = 0; - - u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0; - int i; + *========================================================================== + * MACREG.TXT + *========================================================================== + */ + int nLinesRead = 0; + u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0; + int i; nLinesRead = sizeof(MAC_REG_TABLE)/2; - for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */ + for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */ u4bRegOffset = MAC_REG_TABLE[i][0]; u4bRegValue = MAC_REG_TABLE[i][1]; if (u4bRegOffset == 0x5e) u4bPageIndex = u4bRegValue; - else - u4bRegOffset |= (u4bPageIndex << 8); + u4bRegOffset |= (u4bPageIndex << 8); write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue); } /* ============================================================================ */ } -static void -MacConfig_85BASIC( - struct net_device *dev) +static void MacConfig_85BASIC(struct net_device *dev) { u8 u1DA; @@ -994,18 +905,18 @@ MacConfig_85BASIC( PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000); PlatformIOWrite1Byte(dev, 0x1F8, 0x00); - /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */ - /* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */ + /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */ + /* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */ /* Enable DA10 TX power saving */ u1DA = read_nic_byte(dev, PHYPR); write_nic_byte(dev, PHYPR, (u1DA | BIT2)); - /* POWER: */ + /* POWER: */ write_nic_word(dev, 0x360, 0x1000); write_nic_word(dev, 0x362, 0x1000); - /* AFE. */ + /* AFE. */ write_nic_word(dev, 0x370, 0x0560); write_nic_word(dev, 0x372, 0x0560); write_nic_word(dev, 0x374, 0x0DA4); @@ -1013,54 +924,48 @@ MacConfig_85BASIC( write_nic_word(dev, 0x378, 0x0560); write_nic_word(dev, 0x37A, 0x0560); write_nic_word(dev, 0x37C, 0x00EC); - write_nic_word(dev, 0x37E, 0x00EC); /*+edward */ + write_nic_word(dev, 0x37E, 0x00EC); /* +edward */ write_nic_byte(dev, 0x24E, 0x01); } -u8 -GetSupportedWirelessMode8185( - struct net_device *dev -) +u8 GetSupportedWirelessMode8185(struct net_device *dev) { - u8 btSupportedWirelessMode = 0; + u8 btSupportedWirelessMode = 0; btSupportedWirelessMode = (WIRELESS_MODE_B | WIRELESS_MODE_G); return btSupportedWirelessMode; } -void -ActUpdateChannelAccessSetting( - struct net_device *dev, - WIRELESS_MODE WirelessMode, - PCHANNEL_ACCESS_SETTING ChnlAccessSetting - ) +void ActUpdateChannelAccessSetting(struct net_device *dev, + WIRELESS_MODE WirelessMode, + PCHANNEL_ACCESS_SETTING ChnlAccessSetting) { - struct r8180_priv *priv = ieee80211_priv(dev); - struct ieee80211_device *ieee = priv->ieee80211; + struct r8180_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; AC_CODING eACI; AC_PARAM AcParam; - u8 bFollowLegacySetting = 0; - u8 u1bAIFS; + u8 bFollowLegacySetting = 0; + u8 u1bAIFS; /* - <RJ_TODO_8185B> - TODO: We still don't know how to set up these registers, just follow WMAC to - verify 8185B FPAG. - - <RJ_TODO_8185B> - Jong said CWmin/CWmax register are not functional in 8185B, - so we shall fill channel access realted register into AC parameter registers, - even in nQBss. - */ + * <RJ_TODO_8185B> + * TODO: We still don't know how to set up these registers, just follow WMAC to + * verify 8185B FPAG. + * + * <RJ_TODO_8185B> + * Jong said CWmin/CWmax register are not functional in 8185B, + * so we shall fill channel access realted register into AC parameter registers, + * even in nQBss. + */ ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */ - ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */ - ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */ - ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ - ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */ - ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ + ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */ write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer); - write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */ + write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */ u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer); @@ -1074,17 +979,17 @@ ActUpdateChannelAccessSetting( } /* this setting is copied from rtl8187B. xiong-2006-11-13 */ - if (bFollowLegacySetting) { + if (bFollowLegacySetting) { /* - Follow 802.11 seeting to AC parameter, all AC shall use the same parameter. - 2005.12.01, by rcnjko. - */ + * Follow 802.11 seeting to AC parameter, all AC shall use the same parameter. + * 2005.12.01, by rcnjko. + */ AcParam.longData = 0; AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS. */ AcParam.f.AciAifsn.f.ACM = 0; - AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */ - AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */ + AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */ + AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */ AcParam.f.TXOPLimit = 0; /* lzm reserved 080826 */ @@ -1095,7 +1000,7 @@ ActUpdateChannelAccessSetting( if (ieee->iw_mode == IW_MODE_ADHOC) AcParam.f.TXOPLimit = 0x0020; - for (eACI = 0; eACI < AC_MAX; eACI++) { + for (eACI = 0; eACI < AC_MAX; eACI++) { AcParam.f.AciAifsn.f.ACI = (u8)eACI; { PAC_PARAM pAcParam = (PAC_PARAM)(&AcParam); @@ -1103,7 +1008,7 @@ ActUpdateChannelAccessSetting( u8 u1bAIFS; u32 u4bAcParam; - /* Retrive paramters to udpate. */ + /* Retrieve paramters to update. */ eACI = pAcParam->f.AciAifsn.f.ACI; u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime; u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) | @@ -1111,7 +1016,7 @@ ActUpdateChannelAccessSetting( (((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET) | (((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET)); - switch (eACI) { + switch (eACI) { case AC1_BK: /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */ break; @@ -1133,47 +1038,46 @@ ActUpdateChannelAccessSetting( break; } - /* Cehck ACM bit. */ + /* Cehck ACM bit. */ /* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13. */ { PACI_AIFSN pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn); AC_CODING eACI = pAciAifsn->f.ACI; - /*modified Joseph */ - /*for 8187B AsynIORead issue */ + /*for 8187B AsynIORead issue */ u8 AcmCtrl = 0; - if (pAciAifsn->f.ACM) { + if (pAciAifsn->f.ACM) { /* ACM bit is 1. */ - switch (eACI) { + switch (eACI) { case AC0_BE: - AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */ + AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */ break; case AC2_VI: - AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */ + AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */ break; case AC3_VO: - AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */ + AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */ break; default: DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI); break; } - } else { + } else { /* ACM bit is 0. */ - switch (eACI) { + switch (eACI) { case AC0_BE: - AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */ + AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */ break; case AC2_VI: - AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */ + AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */ break; case AC3_VO: - AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */ + AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */ break; default: @@ -1187,53 +1091,51 @@ ActUpdateChannelAccessSetting( } } -void -ActSetWirelessMode8185( - struct net_device *dev, - u8 btWirelessMode - ) +void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode) { - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - struct ieee80211_device *ieee = priv->ieee80211; + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev); if ((btWirelessMode & btSupportedWirelessMode) == 0) { - /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */ + /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */ DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n", btWirelessMode, btSupportedWirelessMode); return; } - /* 1. Assign wireless mode to swtich if necessary. */ - if (btWirelessMode == WIRELESS_MODE_AUTO) { - if ((btSupportedWirelessMode & WIRELESS_MODE_A)) { + /* 1. Assign wireless mode to switch if necessary. */ + if (btWirelessMode == WIRELESS_MODE_AUTO) { + if ((btSupportedWirelessMode & WIRELESS_MODE_A)) { btWirelessMode = WIRELESS_MODE_A; - } else if (btSupportedWirelessMode & WIRELESS_MODE_G) { + } else if (btSupportedWirelessMode & WIRELESS_MODE_G) { btWirelessMode = WIRELESS_MODE_G; - } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) { - btWirelessMode = WIRELESS_MODE_B; - } else { - DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n", - btSupportedWirelessMode); + } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) { btWirelessMode = WIRELESS_MODE_B; + } else { + DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n", + btSupportedWirelessMode); + btWirelessMode = WIRELESS_MODE_B; } } - /* 2. Swtich band: RF or BB specific actions, + /* + * 2. Swtich band: RF or BB specific actions, * for example, refresh tables in omc8255, or change initial gain if necessary. * Nothing to do for Zebra to switch band. - * Update current wireless mode if we swtich to specified band successfully. */ + * Update current wireless mode if we switch to specified band successfully. + */ ieee->mode = (WIRELESS_MODE)btWirelessMode; - /* 3. Change related setting. */ - if( ieee->mode == WIRELESS_MODE_A ) { + /* 3. Change related setting. */ + if( ieee->mode == WIRELESS_MODE_A ) { DMESG("WIRELESS_MODE_A\n"); - } else if( ieee->mode == WIRELESS_MODE_B ) { - DMESG("WIRELESS_MODE_B\n"); - } else if( ieee->mode == WIRELESS_MODE_G ) { - DMESG("WIRELESS_MODE_G\n"); + } else if( ieee->mode == WIRELESS_MODE_B ) { + DMESG("WIRELESS_MODE_B\n"); + } else if( ieee->mode == WIRELESS_MODE_G ) { + DMESG("WIRELESS_MODE_G\n"); } ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting); } @@ -1245,22 +1147,16 @@ void rtl8185b_irq_enable(struct net_device *dev) priv->irq_enabled = 1; write_nic_dword(dev, IMR, priv->IntrMask); } -/* by amy for power save */ -void -DrvIFIndicateDisassociation( - struct net_device *dev, - u16 reason - ) + +void DrvIFIndicateDisassociation(struct net_device *dev, u16 reason) { /* nothing is needed after disassociation request. */ - } -void -MgntDisconnectIBSS( - struct net_device *dev -) +} + +void MgntDisconnectIBSS(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - u8 i; + u8 i; DrvIFIndicateDisassociation(dev, unspec_reason); @@ -1271,166 +1167,143 @@ MgntDisconnectIBSS( priv->ieee80211->state = IEEE80211_NOLINK; /* - Stop Beacon. - - Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST - Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck. - Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send. - - Disable Beacon Queue Own bit, suggested by jong */ + * Stop Beacon. + * + * Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST + * Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck. + * Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send. + * + * Disable Beacon Queue Own bit, suggested by jong + */ ieee80211_stop_send_beacons(priv->ieee80211); priv->ieee80211->link_change(dev); notify_wx_assoc_event(priv->ieee80211); } -void -MlmeDisassociateRequest( - struct net_device *dev, - u8 *asSta, - u8 asRsn - ) + +void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); u8 i; SendDisassociation(priv->ieee80211, asSta, asRsn); - if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) { - /*ShuChen TODO: change media status. */ - /*ShuChen TODO: What to do when disassociate. */ + if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) { + /* ShuChen TODO: change media status. */ + /* ShuChen TODO: What to do when disassociate. */ DrvIFIndicateDisassociation(dev, unspec_reason); - - for (i = 0; i < 6; i++) priv->ieee80211->current_network.bssid[i] = 0x22; ieee80211_disassociate(priv->ieee80211); } - } -void -MgntDisconnectAP( - struct net_device *dev, - u8 asRsn -) +void MgntDisconnectAP(struct net_device *dev, u8 asRsn) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* - Commented out by rcnjko, 2005.01.27: - I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). - - 2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success - - In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. - 2004.10.11, by rcnjko. */ + * Commented out by rcnjko, 2005.01.27: + * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). + * + * 2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success + * + * In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. + * 2004.10.11, by rcnjko. + */ MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn); priv->ieee80211->state = IEEE80211_NOLINK; } -bool -MgntDisconnect( - struct net_device *dev, - u8 asRsn -) + +bool MgntDisconnect(struct net_device *dev, u8 asRsn) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* - Schedule an workitem to wake up for ps mode, 070109, by rcnjko. - */ + * Schedule an workitem to wake up for ps mode, 070109, by rcnjko. + */ if (IS_DOT11D_ENABLE(priv->ieee80211)) Dot11d_Reset(priv->ieee80211); - /* In adhoc mode, update beacon frame. */ + /* In adhoc mode, update beacon frame. */ if (priv->ieee80211->state == IEEE80211_LINKED) { if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) MgntDisconnectIBSS(dev); - if (priv->ieee80211->iw_mode == IW_MODE_INFRA) { - /* We clear key here instead of MgntDisconnectAP() because that - MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, - e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is - used to handle disassociation related things to AP, e.g. send Disassoc - frame to AP. 2005.01.27, by rcnjko. */ + if (priv->ieee80211->iw_mode == IW_MODE_INFRA) { + /* + * We clear key here instead of MgntDisconnectAP() because that + * MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, + * e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is + * used to handle disassociation related things to AP, e.g. send Disassoc + * frame to AP. 2005.01.27, by rcnjko. + */ MgntDisconnectAP(dev, asRsn); } - /* Inidicate Disconnect, 2005.02.23, by rcnjko. */ + /* Indicate Disconnect, 2005.02.23, by rcnjko. */ } return true; } /* - Description: - Chang RF Power State. - Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. - - Assumption: - PASSIVE LEVEL. -*/ -bool -SetRFPowerState( - struct net_device *dev, - RT_RF_POWER_STATE eRFPowerState - ) + * Description: + * Chang RF Power State. + * Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. + * + * Assumption: + * PASSIVE LEVEL. + */ +bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) { - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - bool bResult = false; + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + bool bResult = false; if (eRFPowerState == priv->eRFPowerState) return bResult; - bResult = SetZebraRFPowerState8185(dev, eRFPowerState); + bResult = SetZebraRFPowerState8185(dev, eRFPowerState); return bResult; } -void -HalEnableRx8185Dummy( - struct net_device *dev - ) + +void HalEnableRx8185Dummy(struct net_device *dev) { } -void -HalDisableRx8185Dummy( - struct net_device *dev - ) + +void HalDisableRx8185Dummy(struct net_device *dev) { } -bool -MgntActSet_RF_State( - struct net_device *dev, - RT_RF_POWER_STATE StateToSet, - u32 ChangeSource - ) +bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource) { - struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - bool bActionAllowed = false; - bool bConnectBySSID = false; - RT_RF_POWER_STATE rtState; - u16 RFWaitCounter = 0; + struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); + bool bActionAllowed = false; + bool bConnectBySSID = false; + RT_RF_POWER_STATE rtState; + u16 RFWaitCounter = 0; unsigned long flag; /* - Prevent the race condition of RF state change. By Bruce, 2007-11-28. - Only one thread can change the RF state at one time, and others should wait to be executed. - */ - while (true) { + * Prevent the race condition of RF state change. By Bruce, 2007-11-28. + * Only one thread can change the RF state at one time, and others should wait to be executed. + */ + while (true) { spin_lock_irqsave(&priv->rf_ps_lock, flag); - if (priv->RFChangeInProgress) { + if (priv->RFChangeInProgress) { spin_unlock_irqrestore(&priv->rf_ps_lock, flag); /* Set RF after the previous action is done. */ - while (priv->RFChangeInProgress) { + while (priv->RFChangeInProgress) { RFWaitCounter++; udelay(1000); /* 1 ms */ - /* Wait too long, return FALSE to avoid to be stuck here. */ - if (RFWaitCounter > 1000) { /* 1sec */ + /* Wait too long, return FALSE to avoid to be stuck here. */ + if (RFWaitCounter > 1000) { /* 1sec */ printk("MgntActSet_RF_State(): Wait too long to set RF\n"); - /* TODO: Reset RF state? */ + /* TODO: Reset RF state? */ return false; } } - } else { + } else { priv->RFChangeInProgress = true; spin_unlock_irqrestore(&priv->rf_ps_lock, flag); break; @@ -1438,12 +1311,12 @@ MgntActSet_RF_State( } rtState = priv->eRFPowerState; - switch (StateToSet) { + switch (StateToSet) { case eRfOn: /* - Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or - the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. - */ + * Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or + * the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. + */ priv->RfOffReason &= (~ChangeSource); if (!priv->RfOffReason) { @@ -1453,25 +1326,24 @@ MgntActSet_RF_State( if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW && !priv->bInHctTest) bConnectBySSID = true; - } else - ; + } else + ; break; case eRfOff: - /* 070125, rcnjko: we always keep connected in AP mode. */ - - if (priv->RfOffReason > RF_CHANGE_BY_IPS) { - /* - 060808, Annie: - Disconnect to current BSS when radio off. Asked by QuanTa. - - Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(), - because we do NOT need to set ssid to dummy ones. - */ - MgntDisconnect(dev, disas_lv_ss); - - /* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */ - } + /* 070125, rcnjko: we always keep connected in AP mode. */ + + if (priv->RfOffReason > RF_CHANGE_BY_IPS) { + /* + * 060808, Annie: + * Disconnect to current BSS when radio off. Asked by QuanTa. + * + * Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(), + * because we do NOT need to set ssid to dummy ones. + */ + MgntDisconnect(dev, disas_lv_ss); + /* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */ + } priv->RfOffReason |= ChangeSource; bActionAllowed = true; @@ -1484,14 +1356,14 @@ MgntActSet_RF_State( break; } - if (bActionAllowed) { - /* Config HW to the specified mode. */ + if (bActionAllowed) { + /* Config HW to the specified mode. */ SetRFPowerState(dev, StateToSet); /* Turn on RF. */ - if (StateToSet == eRfOn) { + if (StateToSet == eRfOn) { HalEnableRx8185Dummy(dev); - if (bConnectBySSID) { + if (bConnectBySSID) { /* by amy not supported */ } } @@ -1507,69 +1379,61 @@ MgntActSet_RF_State( spin_unlock_irqrestore(&priv->rf_ps_lock, flag); return bActionAllowed; } -void -InactivePowerSave( - struct net_device *dev - ) + +void InactivePowerSave(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); /* - This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem - is really scheduled. - The old code, sets this flag before scheduling the IPS workitem and however, at the same time the - previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing - blocks the IPS procedure of switching RF. - */ + * This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem + * is really scheduled. + * The old code, sets this flag before scheduling the IPS workitem and however, at the same time the + * previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing + * blocks the IPS procedure of switching RF. + */ priv->bSwRfProcessing = true; MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS); /* - To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. - */ + * To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. + */ priv->bSwRfProcessing = false; } /* - Description: - Enter the inactive power save mode. RF will be off -*/ -void -IPSEnter( - struct net_device *dev - ) + * Description: + * Enter the inactive power save mode. RF will be off + */ +void IPSEnter(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); RT_RF_POWER_STATE rtState; - if (priv->bInactivePs) { + if (priv->bInactivePs) { rtState = priv->eRFPowerState; /* - Do not enter IPS in the following conditions: - (1) RF is already OFF or Sleep - (2) bSwRfProcessing (indicates the IPS is still under going) - (3) Connectted (only disconnected can trigger IPS) - (4) IBSS (send Beacon) - (5) AP mode (send Beacon) - */ + * Do not enter IPS in the following conditions: + * (1) RF is already OFF or Sleep + * (2) bSwRfProcessing (indicates the IPS is still under going) + * (3) Connected (only disconnected can trigger IPS) + * (4) IBSS (send Beacon) + * (5) AP mode (send Beacon) + */ if (rtState == eRfOn && !priv->bSwRfProcessing - && (priv->ieee80211->state != IEEE80211_LINKED)) { + && (priv->ieee80211->state != IEEE80211_LINKED)) { priv->eInactivePowerState = eRfOff; InactivePowerSave(dev); } } } -void -IPSLeave( - struct net_device *dev - ) +void IPSLeave(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); RT_RF_POWER_STATE rtState; - if (priv->bInactivePs) { + if (priv->bInactivePs) { rtState = priv->eRFPowerState; - if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) { + if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) { priv->eInactivePowerState = eRfOn; InactivePowerSave(dev); } @@ -1582,8 +1446,8 @@ void rtl8185b_adapter_start(struct net_device *dev) struct ieee80211_device *ieee = priv->ieee80211; u8 SupportedWirelessMode; - u8 InitWirelessMode; - u8 bInvalidWirelessMode = 0; + u8 InitWirelessMode; + u8 bInvalidWirelessMode = 0; u8 tmpu8; u8 btCR9346; u8 TmpU1b; @@ -1598,89 +1462,89 @@ void rtl8185b_adapter_start(struct net_device *dev) HwConfigureRTL8185(dev); write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]); write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff); - write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */ + write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */ write_nic_word(dev, BcnItv, 100); write_nic_word(dev, AtimWnd, 2); PlatformIOWrite2Byte(dev, FEMR, 0xFFFF); write_nic_byte(dev, WPA_CONFIG, 0); MacConfig_85BASIC(dev); - /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */ - /* BT_DEMO_BOARD type */ + /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */ + /* BT_DEMO_BOARD type */ PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a); /* - ----------------------------------------------------------------------------- - Set up PHY related. - ----------------------------------------------------------------------------- - */ - /* Enable Config3.PARAM_En to revise AnaaParm. */ - write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */ + *--------------------------------------------------------------------------- + * Set up PHY related. + *--------------------------------------------------------------------------- + */ + /* Enable Config3.PARAM_En to revise AnaaParm. */ + write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */ tmpu8 = read_nic_byte(dev, CONFIG3); write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En)); - /* Turn on Analog power. */ - /* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */ + /* Turn on Analog power. */ + /* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */ write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON); write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON); write_nic_word(dev, ANAPARAM3, 0x0010); write_nic_byte(dev, CONFIG3, tmpu8); write_nic_byte(dev, CR9346, 0x00); - /* enable EEM0 and EEM1 in 9346CR */ + /* enable EEM0 and EEM1 in 9346CR */ btCR9346 = read_nic_byte(dev, CR9346); write_nic_byte(dev, CR9346, (btCR9346 | 0xC0)); - /* B cut use LED1 to control HW RF on/off */ + /* B cut use LED1 to control HW RF on/off */ TmpU1b = read_nic_byte(dev, CONFIG5); TmpU1b = TmpU1b & ~BIT3; write_nic_byte(dev, CONFIG5, TmpU1b); - /* disable EEM0 and EEM1 in 9346CR */ + /* disable EEM0 and EEM1 in 9346CR */ btCR9346 &= ~(0xC0); write_nic_byte(dev, CR9346, btCR9346); - /* Enable Led (suggested by Jong) */ - /* B-cut RF Radio on/off 5e[3]=0 */ + /* Enable Led (suggested by Jong) */ + /* B-cut RF Radio on/off 5e[3]=0 */ btPSR = read_nic_byte(dev, PSR); write_nic_byte(dev, PSR, (btPSR | BIT3)); - /* setup initial timing for RFE. */ + /* setup initial timing for RFE. */ write_nic_word(dev, RFPinsOutput, 0x0480); SetOutputEnableOfRfPins(dev); write_nic_word(dev, RFPinsSelect, 0x2488); - /* PHY config. */ + /* PHY config. */ PhyConfig8185(dev); /* - We assume RegWirelessMode has already been initialized before, - however, we has to validate the wireless mode here and provide a - reasonable initialized value if necessary. 2005.01.13, by rcnjko. - */ + * We assume RegWirelessMode has already been initialized before, + * however, we has to validate the wireless mode here and provide a + * reasonable initialized value if necessary. 2005.01.13, by rcnjko. + */ SupportedWirelessMode = GetSupportedWirelessMode8185(dev); if ((ieee->mode != WIRELESS_MODE_B) && (ieee->mode != WIRELESS_MODE_G) && (ieee->mode != WIRELESS_MODE_A) && - (ieee->mode != WIRELESS_MODE_AUTO)) { - /* It should be one of B, G, A, or AUTO. */ + (ieee->mode != WIRELESS_MODE_AUTO)) { + /* It should be one of B, G, A, or AUTO. */ bInvalidWirelessMode = 1; - } else { - /* One of B, G, A, or AUTO. */ - /* Check if the wireless mode is supported by RF. */ + } else { + /* One of B, G, A, or AUTO. */ + /* Check if the wireless mode is supported by RF. */ if ((ieee->mode != WIRELESS_MODE_AUTO) && - (ieee->mode & SupportedWirelessMode) == 0) { + (ieee->mode & SupportedWirelessMode) == 0) { bInvalidWirelessMode = 1; } } - if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) { - /* Auto or other invalid value. */ - /* Assigne a wireless mode to initialize. */ - if ((SupportedWirelessMode & WIRELESS_MODE_A)) { + if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) { + /* Auto or other invalid value. */ + /* Assigne a wireless mode to initialize. */ + if ((SupportedWirelessMode & WIRELESS_MODE_A)) { InitWirelessMode = WIRELESS_MODE_A; - } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) { + } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) { InitWirelessMode = WIRELESS_MODE_G; - } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) { + } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) { InitWirelessMode = WIRELESS_MODE_B; - } else { + } else { DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", SupportedWirelessMode); InitWirelessMode = WIRELESS_MODE_B; @@ -1690,24 +1554,21 @@ void rtl8185b_adapter_start(struct net_device *dev) if (bInvalidWirelessMode) ieee->mode = (WIRELESS_MODE)InitWirelessMode; - } else { - /* One of B, G, A. */ + } else { + /* One of B, G, A. */ InitWirelessMode = ieee->mode; } -/* by amy for power save */ priv->eRFPowerState = eRfOff; priv->RfOffReason = 0; { MgntActSet_RF_State(dev, eRfOn, 0); } /* - If inactive power mode is enabled, disable rf while in disconnected state. - */ + * If inactive power mode is enabled, disable rf while in disconnected state. + */ if (priv->bInactivePs) MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS); -/* by amy for power save */ - ActSetWirelessMode8185(dev, (u8)(InitWirelessMode)); /* ----------------------------------------------------------------------------- */ @@ -1715,7 +1576,7 @@ void rtl8185b_adapter_start(struct net_device *dev) rtl8185b_irq_enable(dev); netif_start_queue(dev); - } +} void rtl8185b_rx_enable(struct net_device *dev) { @@ -1728,7 +1589,7 @@ void rtl8185b_rx_enable(struct net_device *dev) DMESG("NIC in promisc mode"); if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \ - dev->flags & IFF_PROMISC) { + dev->flags & IFF_PROMISC) { priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM); priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP; } |