diff options
Diffstat (limited to 'drivers/thermal')
| -rw-r--r-- | drivers/thermal/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/thermal/Makefile | 2 | ||||
| -rw-r--r-- | drivers/thermal/cpu_cooling.c | 56 | ||||
| -rw-r--r-- | drivers/thermal/imx_thermal.c | 52 | ||||
| -rw-r--r-- | drivers/thermal/int3403_thermal.c | 237 | ||||
| -rw-r--r-- | drivers/thermal/of-thermal.c | 849 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_thermal_common.c | 2 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.c | 1 | ||||
| -rw-r--r-- | drivers/thermal/thermal_core.c | 77 | ||||
| -rw-r--r-- | drivers/thermal/thermal_core.h | 9 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 77 | ||||
| -rw-r--r-- | drivers/thermal/x86_pkg_temp_thermal.c | 2 |
12 files changed, 1342 insertions, 45 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f35a1f75b15..35c066489a1 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -29,6 +29,19 @@ config THERMAL_HWMON Say 'Y' here if you want all thermal sensors to have hwmon sysfs interface too. +config THERMAL_OF + bool + prompt "APIs to parse thermal data out of device tree" + depends on OF + default y + help + This options provides helpers to add the support to + read and parse thermal data definitions out of the + device tree blob. + + Say 'Y' here if you need to build thermal infrastructure + based on device tree. + choice prompt "Default Thermal governor" default THERMAL_DEFAULT_GOV_STEP_WISE @@ -79,6 +92,7 @@ config THERMAL_GOV_USER_SPACE config CPU_THERMAL bool "generic cpu cooling support" depends on CPU_FREQ + depends on THERMAL_OF help This implements the generic cpu cooling mechanism through frequency reduction. An ACPI version of this already exists @@ -121,7 +135,7 @@ config SPEAR_THERMAL config RCAR_THERMAL tristate "Renesas R-Car thermal driver" - depends on ARCH_SHMOBILE + depends on ARCH_SHMOBILE || COMPILE_TEST help Enable this to plug the R-Car thermal sensor driver into the Linux thermal framework. @@ -192,6 +206,13 @@ config X86_PKG_TEMP_THERMAL two trip points which can be set by user to get notifications via thermal notification methods. +config ACPI_INT3403_THERMAL + tristate "ACPI INT3403 thermal driver" + depends on X86 && ACPI + help + This driver uses ACPI INT3403 device objects. If present, it will + register each INT3403 thermal sensor as a thermal zone. + menu "Texas Instruments thermal drivers" source "drivers/thermal/ti-soc-thermal/Kconfig" endmenu diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 584b36319d5..54e4ec9eb5d 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -7,6 +7,7 @@ thermal_sys-y += thermal_core.o # interface to/from other layers providing sensors thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o +thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o # governors thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o @@ -29,3 +30,4 @@ obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ +obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index bb486b4ca48..4246262c4bd 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -424,18 +424,21 @@ static struct notifier_block thermal_cpufreq_notifier_block = { }; /** - * cpufreq_cooling_register - function to create cpufreq cooling device. + * __cpufreq_cooling_register - helper function to create cpufreq cooling device + * @np: a valid struct device_node to the cooling device device tree node * @clip_cpus: cpumask of cpus where the frequency constraints will happen. * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq - * cooling devices. + * cooling devices. It also gives the opportunity to link the cooling device + * with a device tree node, in order to bind it via the thermal DT code. * * Return: a valid struct thermal_cooling_device pointer on success, * on failure, it returns a corresponding ERR_PTR(). */ -struct thermal_cooling_device * -cpufreq_cooling_register(const struct cpumask *clip_cpus) +static struct thermal_cooling_device * +__cpufreq_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus) { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev = NULL; @@ -474,8 +477,8 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus) snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", cpufreq_dev->id); - cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev, - &cpufreq_cooling_ops); + cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev, + &cpufreq_cooling_ops); if (IS_ERR(cool_dev)) { release_idr(&cpufreq_idr, cpufreq_dev->id); kfree(cpufreq_dev); @@ -495,9 +498,50 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus) return cool_dev; } + +/** + * cpufreq_cooling_register - function to create cpufreq cooling device. + * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * + * This interface function registers the cpufreq cooling device with the name + * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq + * cooling devices. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +cpufreq_cooling_register(const struct cpumask *clip_cpus) +{ + return __cpufreq_cooling_register(NULL, clip_cpus); +} EXPORT_SYMBOL_GPL(cpufreq_cooling_register); /** + * of_cpufreq_cooling_register - function to create cpufreq cooling device. + * @np: a valid struct device_node to the cooling device device tree node + * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * + * This interface function registers the cpufreq cooling device with the name + * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq + * cooling devices. Using this API, the cpufreq cooling device will be + * linked to the device tree node provided. + * + * Return: a valid struct thermal_cooling_device pointer on success, + * on failure, it returns a corresponding ERR_PTR(). + */ +struct thermal_cooling_device * +of_cpufreq_cooling_register(struct device_node *np, + const struct cpumask *clip_cpus) +{ + if (!np) + return ERR_PTR(-EINVAL); + + return __cpufreq_cooling_register(np, clip_cpus); +} +EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register); + +/** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. * @cdev: thermal cooling device pointer. * diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index ca952740a8e..45af765a319 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -7,6 +7,7 @@ * */ +#include <linux/clk.h> #include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/delay.h> @@ -73,6 +74,7 @@ struct imx_thermal_data { unsigned long last_temp; bool irq_enabled; int irq; + struct clk *thermal_clk; }; static void imx_set_alarm_temp(struct imx_thermal_data *data, @@ -457,6 +459,22 @@ static int imx_thermal_probe(struct platform_device *pdev) return ret; } + data->thermal_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->thermal_clk)) { + dev_warn(&pdev->dev, "failed to get thermal clk!\n"); + } else { + /* + * Thermal sensor needs clk on to get correct value, normally + * we should enable its clk before taking measurement and disable + * clk after measurement is done, but if alarm function is enabled, + * hardware will auto measure the temperature periodically, so we + * need to keep the clk always on for alarm function. + */ + ret = clk_prepare_enable(data->thermal_clk); + if (ret) + dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret); + } + /* Enable measurements at ~ 10 Hz */ regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */ @@ -478,6 +496,8 @@ static int imx_thermal_remove(struct platform_device *pdev) /* Disable measurements */ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); + if (!IS_ERR(data->thermal_clk)) + clk_disable_unprepare(data->thermal_clk); thermal_zone_device_unregister(data->tz); cpufreq_cooling_unregister(data->cdev); @@ -490,27 +510,30 @@ static int imx_thermal_suspend(struct device *dev) { struct imx_thermal_data *data = dev_get_drvdata(dev); struct regmap *map = data->tempmon; - u32 val; - regmap_read(map, TEMPSENSE0, &val); - if ((val & TEMPSENSE0_POWER_DOWN) == 0) { - /* - * If a measurement is taking place, wait for a long enough - * time for it to finish, and then check again. If it still - * does not finish, something must go wrong. - */ - udelay(50); - regmap_read(map, TEMPSENSE0, &val); - if ((val & TEMPSENSE0_POWER_DOWN) == 0) - return -ETIMEDOUT; - } + /* + * Need to disable thermal sensor, otherwise, when thermal core + * try to get temperature before thermal sensor resume, a wrong + * temperature will be read as the thermal sensor is powered + * down. + */ + regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); + regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); + data->mode = THERMAL_DEVICE_DISABLED; return 0; } static int imx_thermal_resume(struct device *dev) { - /* Nothing to do for now */ + struct imx_thermal_data *data = dev_get_drvdata(dev); + struct regmap *map = data->tempmon; + + /* Enabled thermal sensor after resume */ + regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); + regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); + data->mode = THERMAL_DEVICE_ENABLED; + return 0; } #endif @@ -522,6 +545,7 @@ static const struct of_device_id of_imx_thermal_match[] = { { .compatible = "fsl,imx6q-tempmon", }, { /* end */ } }; +MODULE_DEVICE_TABLE(of, of_imx_thermal_match); static struct platform_driver imx_thermal = { .driver = { diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c new file mode 100644 index 00000000000..1301681d9a7 --- /dev/null +++ b/drivers/thermal/int3403_thermal.c @@ -0,0 +1,237 @@ +/* + * ACPI INT3403 thermal driver + * Copyright (c) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/thermal.h> + +#define INT3403_TYPE_SENSOR 0x03 +#define INT3403_PERF_CHANGED_EVENT 0x80 +#define INT3403_THERMAL_EVENT 0x90 + +#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100) +#define KELVIN_OFFSET 2732 +#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off)) + +#define ACPI_INT3403_CLASS "int3403" +#define ACPI_INT3403_FILE_STATE "state" + +struct int3403_sensor { + struct thermal_zone_device *tzone; + unsigned long *thresholds; +}; + +static int sys_get_curr_temp(struct thermal_zone_device *tzone, + unsigned long *temp) +{ + struct acpi_device *device = tzone->devdata; + unsigned long long tmp; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_hyst(struct thermal_zone_device *tzone, + int trip, unsigned long *temp) +{ + struct acpi_device *device = tzone->devdata; + unsigned long long hyst; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(hyst, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_temp(struct thermal_zone_device *tzone, + int trip, unsigned long *temp) +{ + struct acpi_device *device = tzone->devdata; + struct int3403_sensor *obj = acpi_driver_data(device); + + /* + * get_trip_temp is a mandatory callback but + * PATx method doesn't return any value, so return + * cached value, which was last set from user space. + */ + *temp = obj->thresholds[trip]; + + return 0; +} + +static int sys_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) +{ + /* Mandatory callback, may not mean much here */ + *type = THERMAL_TRIP_PASSIVE; + + return 0; +} + +int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip, + unsigned long temp) +{ + struct acpi_device *device = tzone->devdata; + acpi_status status; + char name[10]; + int ret = 0; + struct int3403_sensor *obj = acpi_driver_data(device); + + snprintf(name, sizeof(name), "PAT%d", trip); + if (acpi_has_method(device->handle, name)) { + status = acpi_execute_simple_method(device->handle, name, + MILLI_CELSIUS_TO_DECI_KELVIN(temp, + KELVIN_OFFSET)); + if (ACPI_FAILURE(status)) + ret = -EIO; + else + obj->thresholds[trip] = temp; + } else { + ret = -EIO; + dev_err(&device->dev, "sys_set_trip_temp: method not found\n"); + } + + return ret; +} + +static struct thermal_zone_device_ops tzone_ops = { + .get_temp = sys_get_curr_temp, + .get_trip_temp = sys_get_trip_temp, + .get_trip_type = sys_get_trip_type, + .set_trip_temp = sys_set_trip_temp, + .get_trip_hyst = sys_get_trip_hyst, +}; + +static void acpi_thermal_notify(struct acpi_device *device, u32 event) +{ + struct int3403_sensor *obj; + + if (!device) + return; + + obj = acpi_driver_data(device); + if (!obj) + return; + + switch (event) { + case INT3403_PERF_CHANGED_EVENT: + break; + case INT3403_THERMAL_EVENT: + thermal_zone_device_update(obj->tzone); + break; + default: + dev_err(&device->dev, "Unsupported event [0x%x]\n", event); + break; + } +} + +static int acpi_int3403_add(struct acpi_device *device) +{ + int result = 0; + unsigned long long ptyp; + acpi_status status; + struct int3403_sensor *obj; + unsigned long long trip_cnt; + int trip_mask = 0; + + if (!device) + return -EINVAL; + + status = acpi_evaluate_integer(device->handle, "PTYP", NULL, &ptyp); + if (ACPI_FAILURE(status)) + return -EINVAL; + + if (ptyp != INT3403_TYPE_SENSOR) + return -EINVAL; + + obj = devm_kzalloc(&device->dev, sizeof(*obj), GFP_KERNEL); + if (!obj) + return -ENOMEM; + + device->driver_data = obj; + + status = acpi_evaluate_integer(device->handle, "PATC", NULL, + &trip_cnt); + if (ACPI_FAILURE(status)) + trip_cnt = 0; + + if (trip_cnt) { + /* We have to cache, thresholds can't be readback */ + obj->thresholds = devm_kzalloc(&device->dev, + sizeof(*obj->thresholds) * trip_cnt, + GFP_KERNEL); + if (!obj->thresholds) + return -ENOMEM; + trip_mask = BIT(trip_cnt) - 1; + } + obj->tzone = thermal_zone_device_register(acpi_device_bid(device), + trip_cnt, trip_mask, device, &tzone_ops, + NULL, 0, 0); + if (IS_ERR(obj->tzone)) { + result = PTR_ERR(obj->tzone); + return result; + } + + strcpy(acpi_device_name(device), "INT3403"); + strcpy(acpi_device_class(device), ACPI_INT3403_CLASS); + + return 0; +} + +static int acpi_int3403_remove(struct acpi_device *device) +{ + struct int3403_sensor *obj; + + obj = acpi_driver_data(device); + thermal_zone_device_unregister(obj->tzone); + + return 0; +} + +ACPI_MODULE_NAME("int3403"); +static const struct acpi_device_id int3403_device_ids[] = { + {"INT3403", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, int3403_device_ids); + +static struct acpi_driver acpi_int3403_driver = { + .name = "INT3403", + .class = ACPI_INT3403_CLASS, + .ids = int3403_device_ids, + .ops = { + .add = acpi_int3403_add, + .remove = acpi_int3403_remove, + .notify = acpi_thermal_notify, + }, +}; + +module_acpi_driver(acpi_int3403_driver); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ACPI INT3403 thermal driver"); diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c new file mode 100644 index 00000000000..04b1be7fa01 --- /dev/null +++ b/drivers/thermal/of-thermal.c @@ -0,0 +1,849 @@ +/* + * of-thermal.c - Generic Thermal Management device tree support. + * + * Copyright (C) 2013 Texas Instruments + * Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com> + * + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#include <linux/thermal.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/string.h> + +#include "thermal_core.h" + +/*** Private data structures to represent thermal device tree data ***/ + +/** + * struct __thermal_trip - representation of a point in temperature domain + * @np: pointer to struct device_node that this trip point was created from + * @temperature: temperature value in miliCelsius + * @hysteresis: relative hysteresis in miliCelsius + * @type: trip point type + */ + +struct __thermal_trip { + struct device_node *np; + unsigned long int temperature; + unsigned long int hysteresis; + enum thermal_trip_type type; +}; + +/** + * struct __thermal_bind_param - a match between trip and cooling device + * @cooling_device: a pointer to identify the referred cooling device + * @trip_id: the trip point index + * @usage: the percentage (from 0 to 100) of cooling contribution + * @min: minimum cooling state used at this trip point + * @max: maximum cooling state used at this trip point + */ + +struct __thermal_bind_params { + struct device_node *cooling_device; + unsigned int trip_id; + unsigned int usage; + unsigned long min; + unsigned long max; +}; + +/** + * struct __thermal_zone - internal representation of a thermal zone + * @mode: current thermal zone device mode (enabled/disabled) + * @passive_delay: polling interval while passive cooling is activated + * @polling_delay: zone polling interval + * @ntrips: number of trip points + * @trips: an array of trip points (0..ntrips - 1) + * @num_tbps: number of thermal bind params + * @tbps: an array of thermal bind params (0..num_tbps - 1) + * @sensor_data: sensor private data used while reading temperature and trend + * @get_temp: sensor callback to read temperature + * @get_trend: sensor callback to read temperature trend + */ + +struct __thermal_zone { + enum thermal_device_mode mode; + int passive_delay; + int polling_delay; + + /* trip data */ + int ntrips; + struct __thermal_trip *trips; + + /* cooling binding data */ + int num_tbps; + struct __thermal_bind_params *tbps; + + /* sensor interface */ + void *sensor_data; + int (*get_temp)(void *, long *); + int (*get_trend)(void *, long *); +}; + +/*** DT thermal zone device callbacks ***/ + +static int of_thermal_get_temp(struct thermal_zone_device *tz, + unsigned long *temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data->get_temp) + return -EINVAL; + + return data->get_temp(data->sensor_data, temp); +} + +static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip, + enum thermal_trend *trend) +{ + struct __thermal_zone *data = tz->devdata; + long dev_trend; + int r; + + if (!data->get_trend) + return -EINVAL; + + r = data->get_trend(data->sensor_data, &dev_trend); + if (r) + return r; + + /* TODO: These intervals might have some thresholds, but in core code */ + if (dev_trend > 0) + *trend = THERMAL_TREND_RAISING; + else if (dev_trend < 0) + *trend = THERMAL_TREND_DROPPING; + else + *trend = THERMAL_TREND_STABLE; + + return 0; +} + +static int of_thermal_bind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct __thermal_zone *data = thermal->devdata; + int i; + + if (!data || IS_ERR(data)) + return -ENODEV; + + /* find where to bind */ + for (i = 0; i < data->num_tbps; i++) { + struct __thermal_bind_params *tbp = data->tbps + i; + + if (tbp->cooling_device == cdev->np) { + int ret; + + ret = thermal_zone_bind_cooling_device(thermal, + tbp->trip_id, cdev, + tbp->min, + tbp->max); + if (ret) + return ret; + } + } + + return 0; +} + +static int of_thermal_unbind(struct thermal_zone_device *thermal, + struct thermal_cooling_device *cdev) +{ + struct __thermal_zone *data = thermal->devdata; + int i; + + if (!data || IS_ERR(data)) + return -ENODEV; + + /* find where to unbind */ + for (i = 0; i < data->num_tbps; i++) { + struct __thermal_bind_params *tbp = data->tbps + i; + + if (tbp->cooling_device == cdev->np) { + int ret; + + ret = thermal_zone_unbind_cooling_device(thermal, + tbp->trip_id, cdev); + if (ret) + return ret; + } + } + + return 0; +} + +static int of_thermal_get_mode(struct thermal_zone_device *tz, + enum thermal_device_mode *mode) +{ + struct __thermal_zone *data = tz->devdata; + + *mode = data->mode; + + return 0; +} + +static int of_thermal_set_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) +{ + struct __thermal_zone *data = tz->devdata; + + mutex_lock(&tz->lock); + + if (mode == THERMAL_DEVICE_ENABLED) + tz->polling_delay = data->polling_delay; + else + tz->polling_delay = 0; + + mutex_unlock(&tz->lock); + + data->mode = mode; + thermal_zone_device_update(tz); + + return 0; +} + +static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip, + enum thermal_trip_type *type) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + *type = data->trips[trip].type; + + return 0; +} + +static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip, + unsigned long *temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + *temp = data->trips[trip].temperature; + + return 0; +} + +static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip, + unsigned long temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + /* thermal framework should take care of data->mask & (1 << trip) */ + data->trips[trip].temperature = temp; + + return 0; +} + +static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip, + unsigned long *hyst) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + *hyst = data->trips[trip].hysteresis; + + return 0; +} + +static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip, + unsigned long hyst) +{ + struct __thermal_zone *data = tz->devdata; + + if (trip >= data->ntrips || trip < 0) + return -EDOM; + + /* thermal framework should take care of data->mask & (1 << trip) */ + data->trips[trip].hysteresis = hyst; + + return 0; +} + +static int of_thermal_get_crit_temp(struct thermal_zone_device *tz, + unsigned long *temp) +{ + struct __thermal_zone *data = tz->devdata; + int i; + + for (i = 0; i < data->ntrips; i++) + if (data->trips[i].type == THERMAL_TRIP_CRITICAL) { + *temp = data->trips[i].temperature; + return 0; + } + + return -EINVAL; +} + +static struct thermal_zone_device_ops of_thermal_ops = { + .get_mode = of_thermal_get_mode, + .set_mode = of_thermal_set_mode, + + .get_trip_type = of_thermal_get_trip_type, + .get_trip_temp = of_thermal_get_trip_temp, + .set_trip_temp = of_thermal_set_trip_temp, + .get_trip_hyst = of_thermal_get_trip_hyst, + .set_trip_hyst = of_thermal_set_trip_hyst, + .get_crit_temp = of_thermal_get_crit_temp, + + .bind = of_thermal_bind, + .unbind = of_thermal_unbind, +}; + +/*** sensor API ***/ + +static struct thermal_zone_device * +thermal_zone_of_add_sensor(struct device_node *zone, + struct device_node *sensor, void *data, + int (*get_temp)(void *, long *), + int (*get_trend)(void *, long *)) +{ + struct thermal_zone_device *tzd; + struct __thermal_zone *tz; + + tzd = thermal_zone_get_zone_by_name(zone->name); + if (IS_ERR(tzd)) + return ERR_PTR(-EPROBE_DEFER); + + tz = tzd->devdata; + + mutex_lock(&tzd->lock); + tz->get_temp = get_temp; + tz->get_trend = get_trend; + tz->sensor_data = data; + + tzd->ops->get_temp = of_thermal_get_temp; + tzd->ops->get_trend = of_thermal_get_trend; + mutex_unlock(&tzd->lock); + + return tzd; +} + +/** + * thermal_zone_of_sensor_register - registers a sensor to a DT thermal zone + * @dev: a valid struct device pointer of a sensor device. Must contain + * a valid .of_node, for the sensor node. + * @sensor_id: a sensor identifier, in case the sensor IP has more + * than one sensors + * @data: a private pointer (owned by the caller) that will be passed + * back, when a temperature reading is needed. + * @get_temp: a pointer to a function that reads the sensor temperature. + * @get_trend: a pointer to a function that reads the sensor temperature trend. + * + * This function will search the list of thermal zones described in device + * tree and look for the zone that refer to the sensor device pointed by + * @dev->of_node as temperature providers. For the zone pointing to the + * sensor node, the sensor will be added to the DT thermal zone device. + * + * The thermal zone temperature is provided by the @get_temp function + * pointer. When called, it will have the private pointer @data back. + * + * The thermal zone temperature trend is provided by the @get_trend function + * pointer. When called, it will have the private pointer @data back. + * + * TODO: + * 01 - This function must enqueue the new sensor instead of using + * it as the only source of temperature values. + * + * 02 - There must be a way to match the sensor with all thermal zones + * that refer to it. + * + * Return: On success returns a valid struct thermal_zone_device, + * otherwise, it returns a corresponding ERR_PTR(). Caller must + * check the return value with help of IS_ERR() helper. + */ +struct thermal_zone_device * +thermal_zone_of_sensor_register(struct device *dev, int sensor_id, + void *data, int (*get_temp)(void *, long *), + int (*get_trend)(void *, long *)) +{ + struct device_node *np, *child, *sensor_np; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) + return ERR_PTR(-ENODEV); + + if (!dev || !dev->of_node) + return ERR_PTR(-EINVAL); + + sensor_np = dev->of_node; + + for_each_child_of_node(np, child) { + struct of_phandle_args sensor_specs; + int ret, id; + + /* For now, thermal framework supports only 1 sensor per zone */ + ret = of_parse_phandle_with_args(child, "thermal-sensors", + "#thermal-sensor-cells", + 0, &sensor_specs); + if (ret) + continue; + + if (sensor_specs.args_count >= 1) { + id = sensor_specs.args[0]; + WARN(sensor_specs.args_count > 1, + "%s: too many cells in sensor specifier %d\n", + sensor_specs.np->name, sensor_specs.args_count); + } else { + id = 0; + } + + if (sensor_specs.np == sensor_np && id == sensor_id) { + of_node_put(np); + return thermal_zone_of_add_sensor(child, sensor_np, + data, + get_temp, + get_trend); + } + } + of_node_put(np); + + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register); + +/** + * thermal_zone_of_sensor_unregister - unregisters a sensor from a DT thermal zone + * @dev: a valid struct device pointer of a sensor device. Must contain + * a valid .of_node, for the sensor node. + * @tzd: a pointer to struct thermal_zone_device where the sensor is registered. + * + * This function removes the sensor callbacks and private data from the + * thermal zone device registered with thermal_zone_of_sensor_register() + * API. It will also silent the zone by remove the .get_temp() and .get_trend() + * thermal zone device callbacks. + * + * TODO: When the support to several sensors per zone is added, this + * function must search the sensor list based on @dev parameter. + * + */ +void thermal_zone_of_sensor_unregister(struct device *dev, + struct thermal_zone_device *tzd) +{ + struct __thermal_zone *tz; + + if (!dev || !tzd || !tzd->devdata) + return; + + tz = tzd->devdata; + + /* no __thermal_zone, nothing to be done */ + if (!tz) + return; + + mutex_lock(&tzd->lock); + tzd->ops->get_temp = NULL; + tzd->ops->get_trend = NULL; + + tz->get_temp = NULL; + tz->get_trend = NULL; + tz->sensor_data = NULL; + mutex_unlock(&tzd->lock); +} +EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister); + +/*** functions parsing device tree nodes ***/ + +/** + * thermal_of_populate_bind_params - parse and fill cooling map data + * @np: DT node containing a cooling-map node + * @__tbp: data structure to be filled with cooling map info + * @trips: array of thermal zone trip points + * @ntrips: number of trip points inside trips. + * + * This function parses a cooling-map type of node represented by + * @np parameter and fills the read data into @__tbp data structure. + * It needs the already parsed array of trip points of the thermal zone + * in consideration. + * + * Return: 0 on success, proper error code otherwise + */ +static int thermal_of_populate_bind_params(struct device_node *np, + struct __thermal_bind_params *__tbp, + struct __thermal_trip *trips, + int ntrips) +{ + struct of_phandle_args cooling_spec; + struct device_node *trip; + int ret, i; + u32 prop; + + /* Default weight. Usage is optional */ + __tbp->usage = 0; + ret = of_property_read_u32(np, "contribution", &prop); + if (ret == 0) + __tbp->usage = prop; + + trip = of_parse_phandle(np, "trip", 0); + if (!trip) { + pr_err("missing trip property\n"); + return -ENODEV; + } + + /* match using device_node */ + for (i = 0; i < ntrips; i++) + if (trip == trips[i].np) { + __tbp->trip_id = i; + break; + } + + if (i == ntrips) { + ret = -ENODEV; + goto end; + } + + ret = of_parse_phandle_with_args(np, "cooling-device", "#cooling-cells", + 0, &cooling_spec); + if (ret < 0) { + pr_err("missing cooling_device property\n"); + goto end; + } + __tbp->cooling_device = cooling_spec.np; + if (cooling_spec.args_count >= 2) { /* at least min and max */ + __tbp->min = cooling_spec.args[0]; + __tbp->max = cooling_spec.args[1]; + } else { + pr_err("wrong reference to cooling device, missing limits\n"); + } + +end: + of_node_put(trip); + + return ret; +} + +/** + * It maps 'enum thermal_trip_type' found in include/linux/thermal.h + * into the device tree binding of 'trip', property type. + */ +static const char * const trip_types[] = { + [THERMAL_TRIP_ACTIVE] = "active", + [THERMAL_TRIP_PASSIVE] = "passive", + [THERMAL_TRIP_HOT] = "hot", + [THERMAL_TRIP_CRITICAL] = "critical", +}; + +/** + * thermal_of_get_trip_type - Get phy mode for given device_node + * @np: Pointer to the given device_node + * @type: Pointer to resulting trip type + * + * The function gets trip type string from property 'type', + * and store its index in trip_types table in @type, + * + * Return: 0 on success, or errno in error case. + */ +static int thermal_of_get_trip_type(struct device_node *np, + enum thermal_trip_type *type) +{ + const char *t; + int err, i; + + err = of_property_read_string(np, "type", &t); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(trip_types); i++) + if (!strcasecmp(t, trip_types[i])) { + *type = i; + return 0; + } + + return -ENODEV; +} + +/** + * thermal_of_populate_trip - parse and fill one trip point data + * @np: DT node containing a trip point node + * @trip: trip point data structure to be filled up + * + * This function parses a trip point type of node represented by + * @np parameter and fills the read data into @trip data structure. + * + * Return: 0 on success, proper error code otherwise + */ +static int thermal_of_populate_trip(struct device_node *np, + struct __thermal_trip *trip) +{ + int prop; + int ret; + + ret = of_property_read_u32(np, "temperature", &prop); + if (ret < 0) { + pr_err("missing temperature property\n"); + return ret; + } + trip->temperature = prop; + + ret = of_property_read_u32(np, "hysteresis", &prop); + if (ret < 0) { + pr_err("missing hysteresis property\n"); + return ret; + } + trip->hysteresis = prop; + + ret = thermal_of_get_trip_type(np, &trip->type); + if (ret < 0) { + pr_err("wrong trip type property\n"); + return ret; + } + + /* Required for cooling map matching */ + trip->np = np; + + return 0; +} + +/** + * thermal_of_build_thermal_zone - parse and fill one thermal zone data + * @np: DT node containing a thermal zone node + * + * This function parses a thermal zone type of node represented by + * @np parameter and fills the read data into a __thermal_zone data structure + * and return this pointer. + * + * TODO: Missing properties to parse: thermal-sensor-names and coefficients + * + * Return: On success returns a valid struct __thermal_zone, + * otherwise, it returns a corresponding ERR_PTR(). Caller must + * check the return value with help of IS_ERR() helper. + */ +static struct __thermal_zone * +thermal_of_build_thermal_zone(struct device_node *np) +{ + struct device_node *child = NULL, *gchild; + struct __thermal_zone *tz; + int ret, i; + u32 prop; + + if (!np) { + pr_err("no thermal zone np\n"); + return ERR_PTR(-EINVAL); + } + + tz = kzalloc(sizeof(*tz), GFP_KERNEL); + if (!tz) + return ERR_PTR(-ENOMEM); + + ret = of_property_read_u32(np, "polling-delay-passive", &prop); + if (ret < 0) { + pr_err("missing polling-delay-passive property\n"); + goto free_tz; + } + tz->passive_delay = prop; + + ret = of_property_read_u32(np, "polling-delay", &prop); + if (ret < 0) { + pr_err("missing polling-delay property\n"); + goto free_tz; + } + tz->polling_delay = prop; + + /* trips */ + child = of_get_child_by_name(np, "trips"); + + /* No trips provided */ + if (!child) + goto finish; + + tz->ntrips = of_get_child_count(child); + if (tz->ntrips == 0) /* must have at least one child */ + goto finish; + + tz->trips = kzalloc(tz->ntrips * sizeof(*tz->trips), GFP_KERNEL); + if (!tz->trips) { + ret = -ENOMEM; + goto free_tz; + } + + i = 0; + for_each_child_of_node(child, gchild) { + ret = thermal_of_populate_trip(gchild, &tz->trips[i++]); + if (ret) + goto free_trips; + } + + of_node_put(child); + + /* cooling-maps */ + child = of_get_child_by_name(np, "cooling-maps"); + + /* cooling-maps not provided */ + if (!child) + goto finish; + + tz->num_tbps = of_get_child_count(child); + if (tz->num_tbps == 0) + goto finish; + + tz->tbps = kzalloc(tz->num_tbps * sizeof(*tz->tbps), GFP_KERNEL); + if (!tz->tbps) { + ret = -ENOMEM; + goto free_trips; + } + + i = 0; + for_each_child_of_node(child, gchild) + ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++], + tz->trips, tz->ntrips); + if (ret) + goto free_tbps; + +finish: + of_node_put(child); + tz->mode = THERMAL_DEVICE_DISABLED; + + return tz; + +free_tbps: + kfree(tz->tbps); +free_trips: + kfree(tz->trips); +free_tz: + kfree(tz); + of_node_put(child); + + return ERR_PTR(ret); +} + +static inline void of_thermal_free_zone(struct __thermal_zone *tz) +{ + kfree(tz->tbps); + kfree(tz->trips); + kfree(tz); +} + +/** + * of_parse_thermal_zones - parse device tree thermal data + * + * Initialization function that can be called by machine initialization + * code to parse thermal data and populate the thermal framework + * with hardware thermal zones info. This function only parses thermal zones. + * Cooling devices and sensor devices nodes are supposed to be parsed + * by their respective drivers. + * + * Return: 0 on success, proper error code otherwise + * + */ +int __init of_parse_thermal_zones(void) +{ + struct device_node *np, *child; + struct __thermal_zone *tz; + struct thermal_zone_device_ops *ops; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) { + pr_debug("unable to find thermal zones\n"); + return 0; /* Run successfully on systems without thermal DT */ + } + + for_each_child_of_node(np, child) { + struct thermal_zone_device *zone; + struct thermal_zone_params *tzp; + + tz = thermal_of_build_thermal_zone(child); + if (IS_ERR(tz)) { + pr_err("failed to build thermal zone %s: %ld\n", + child->name, + PTR_ERR(tz)); + continue; + } + + ops = kmemdup(&of_thermal_ops, sizeof(*ops), GFP_KERNEL); + if (!ops) + goto exit_free; + + tzp = kzalloc(sizeof(*tzp), GFP_KERNEL); + if (!tzp) { + kfree(ops); + goto exit_free; + } + + /* No hwmon because there might be hwmon drivers registering */ + tzp->no_hwmon = true; + + zone = thermal_zone_device_register(child->name, tz->ntrips, + 0, tz, + ops, tzp, + tz->passive_delay, + tz->polling_delay); + if (IS_ERR(zone)) { + pr_err("Failed to build %s zone %ld\n", child->name, + PTR_ERR(zone)); + kfree(tzp); + kfree(ops); + of_thermal_free_zone(tz); + /* attempting to build remaining zones still */ + } + } + + return 0; + +exit_free: + of_thermal_free_zone(tz); + + /* no memory available, so free what we have built */ + of_thermal_destroy_zones(); + + return -ENOMEM; +} + +/** + * of_thermal_destroy_zones - remove all zones parsed and allocated resources + * + * Finds all zones parsed and added to the thermal framework and remove them + * from the system, together with their resources. + * + */ +void of_thermal_destroy_zones(void) +{ + struct device_node *np, *child; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) { + pr_err("unable to find thermal zones\n"); + return; + } + + for_each_child_of_node(np, child) { + struct thermal_zone_device *zone; + + zone = thermal_zone_get_zone_by_name(child->name); + if (IS_ERR(zone)) + continue; + + thermal_zone_device_unregister(zone); + kfree(zone->tzp); + kfree(zone->ops); + of_thermal_free_zone(zone->devdata); + } +} diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c index c2301da08ac..3f5ad25ddca 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ b/drivers/thermal/samsung/exynos_thermal_common.c @@ -280,7 +280,7 @@ static int exynos_get_trend(struct thermal_zone_device *thermal, return 0; } /* Operation callback functions for thermal zone */ -static struct thermal_zone_device_ops const exynos_dev_ops = { +static struct thermal_zone_device_ops exynos_dev_ops = { .bind = exynos_bind, .unbind = exynos_unbind, .get_temp = exynos_get_temp, diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 32f38b90c4f..0d96a510389 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -205,6 +205,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev) skip_calib_data: if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) { dev_err(&pdev->dev, "Invalid max trigger level\n"); + ret = -EINVAL; goto out; } diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 45632bc05cc..338a88bf666 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -34,6 +34,7 @@ #include <linux/thermal.h> #include <linux/reboot.h> #include <linux/string.h> +#include <linux/of.h> #include <net/netlink.h> #include <net/genetlink.h> @@ -403,7 +404,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp) enum thermal_trip_type type; #endif - if (!tz || IS_ERR(tz)) + if (!tz || IS_ERR(tz) || !tz->ops->get_temp) goto exit; mutex_lock(&tz->lock); @@ -459,6 +460,9 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) { int count; + if (!tz->ops->get_temp) + return; + update_temperature(tz); for (count = 0; count < tz->trips; count++) @@ -1058,7 +1062,8 @@ static struct class thermal_class = { }; /** - * thermal_cooling_device_register() - register a new thermal cooling device + * __thermal_cooling_device_register() - register a new thermal cooling device + * @np: a pointer to a device tree node. * @type: the thermal cooling device type. * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. @@ -1066,13 +1071,16 @@ static struct class thermal_class = { * This interface function adds a new thermal cooling device (fan/processor/...) * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself * to all the thermal zone devices registered at the same time. + * It also gives the opportunity to link the cooling device to a device tree + * node, so that it can be bound to a thermal zone created out of device tree. * * Return: a pointer to the created struct thermal_cooling_device or an * ERR_PTR. Caller must check return value with IS_ERR*() helpers. */ -struct thermal_cooling_device * -thermal_cooling_device_register(char *type, void *devdata, - const struct thermal_cooling_device_ops *ops) +static struct thermal_cooling_device * +__thermal_cooling_device_register(struct device_node *np, + char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; int result; @@ -1097,6 +1105,7 @@ thermal_cooling_device_register(char *type, void *devdata, strlcpy(cdev->type, type ? : "", sizeof(cdev->type)); mutex_init(&cdev->lock); INIT_LIST_HEAD(&cdev->thermal_instances); + cdev->np = np; cdev->ops = ops; cdev->updated = true; cdev->device.class = &thermal_class; @@ -1139,9 +1148,53 @@ unregister: device_unregister(&cdev->device); return ERR_PTR(result); } + +/** + * thermal_cooling_device_register() - register a new thermal cooling device + * @type: the thermal cooling device type. + * @devdata: device private data. + * @ops: standard thermal cooling devices callbacks. + * + * This interface function adds a new thermal cooling device (fan/processor/...) + * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + * to all the thermal zone devices registered at the same time. + * + * Return: a pointer to the created struct thermal_cooling_device or an + * ERR_PTR. Caller must check return value with IS_ERR*() helpers. + */ +struct thermal_cooling_device * +thermal_cooling_device_register(char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) +{ + return __thermal_cooling_device_register(NULL, type, devdata, ops); +} EXPORT_SYMBOL_GPL(thermal_cooling_device_register); /** + * thermal_of_cooling_device_register() - register an OF thermal cooling device + * @np: a pointer to a device tree node. + * @type: the thermal cooling device type. + * @devdata: device private data. + * @ops: standard thermal cooling devices callbacks. + * + * This function will register a cooling device with device tree node reference. + * This interface function adds a new thermal cooling device (fan/processor/...) + * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + * to all the thermal zone devices registered at the same time. + * + * Return: a pointer to the created struct thermal_cooling_device or an + * ERR_PTR. Caller must check return value with IS_ERR*() helpers. + */ +struct thermal_cooling_device * +thermal_of_cooling_device_register(struct device_node *np, + char *type, void *devdata, + const struct thermal_cooling_device_ops *ops) +{ + return __thermal_cooling_device_register(np, type, devdata, ops); +} +EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register); + +/** * thermal_cooling_device_unregister - removes the registered thermal cooling device * @cdev: the thermal cooling device to remove. * @@ -1379,7 +1432,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) */ struct thermal_zone_device *thermal_zone_device_register(const char *type, int trips, int mask, void *devdata, - const struct thermal_zone_device_ops *ops, + struct thermal_zone_device_ops *ops, const struct thermal_zone_params *tzp, int passive_delay, int polling_delay) { @@ -1395,7 +1448,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips) return ERR_PTR(-EINVAL); - if (!ops || !ops->get_temp) + if (!ops) return ERR_PTR(-EINVAL); if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp)) @@ -1499,6 +1552,9 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check); + if (!tz->ops->get_temp) + thermal_zone_device_set_polling(tz, 0); + thermal_zone_device_update(tz); if (!result) @@ -1749,8 +1805,14 @@ static int __init thermal_init(void) if (result) goto unregister_class; + result = of_parse_thermal_zones(); + if (result) + goto exit_netlink; + return 0; +exit_netlink: + genetlink_exit(); unregister_governors: thermal_unregister_governors(); unregister_class: @@ -1766,6 +1828,7 @@ error: static void __exit thermal_exit(void) { + of_thermal_destroy_zones(); genetlink_exit(); class_unregister(&thermal_class); thermal_unregister_governors(); diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 7cf2f662625..3db339fb636 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -77,4 +77,13 @@ static inline int thermal_gov_user_space_register(void) { return 0; } static inline void thermal_gov_user_space_unregister(void) {} #endif /* CONFIG_THERMAL_GOV_USER_SPACE */ +/* device tree support */ +#ifdef CONFIG_THERMAL_OF +int of_parse_thermal_zones(void); +void of_thermal_destroy_zones(void); +#else +static inline int of_parse_thermal_zones(void) { return 0; } +static inline void of_thermal_destroy_zones(void) { } +#endif + #endif /* __THERMAL_CORE_H__ */ diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 5a47cc8c8f8..9eec26dc044 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -31,6 +31,7 @@ #include <linux/cpufreq.h> #include <linux/cpumask.h> #include <linux/cpu_cooling.h> +#include <linux/of.h> #include "ti-thermal.h" #include "ti-bandgap.h" @@ -44,6 +45,7 @@ struct ti_thermal_data { enum thermal_device_mode mode; struct work_struct thermal_wq; int sensor_id; + bool our_zone; }; static void ti_thermal_work(struct work_struct *work) @@ -75,11 +77,10 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c) /* thermal zone ops */ /* Get temperature callback function for thermal zone*/ -static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, - unsigned long *temp) +static inline int __ti_thermal_get_temp(void *devdata, long *temp) { struct thermal_zone_device *pcb_tz = NULL; - struct ti_thermal_data *data = thermal->devdata; + struct ti_thermal_data *data = devdata; struct ti_bandgap *bgp; const struct ti_temp_sensor *s; int ret, tmp, slope, constant; @@ -118,6 +119,14 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, return ret; } +static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct ti_thermal_data *data = thermal->devdata; + + return __ti_thermal_get_temp(data, temp); +} + /* Bind callback functions for thermal zone */ static int ti_thermal_bind(struct thermal_zone_device *thermal, struct thermal_cooling_device *cdev) @@ -230,11 +239,9 @@ static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal, return 0; } -/* Get the temperature trend callback functions for thermal zone */ -static int ti_thermal_get_trend(struct thermal_zone_device *thermal, - int trip, enum thermal_trend *trend) +static int __ti_thermal_get_trend(void *p, long *trend) { - struct ti_thermal_data *data = thermal->devdata; + struct ti_thermal_data *data = p; struct ti_bandgap *bgp; int id, tr, ret = 0; @@ -245,6 +252,22 @@ static int ti_thermal_get_trend(struct thermal_zone_device *thermal, if (ret) return ret; + *trend = tr; + + return 0; +} + +/* Get the temperature trend callback functions for thermal zone */ +static int ti_thermal_get_trend(struct thermal_zone_device *thermal, + int trip, enum thermal_trend *trend) +{ + int ret; + long tr; + + ret = __ti_thermal_get_trend(thermal->devdata, &tr); + if (ret) + return ret; + if (tr > 0) *trend = THERMAL_TREND_RAISING; else if (tr < 0) @@ -308,16 +331,23 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, if (!data) return -EINVAL; - /* Create thermal zone */ - data->ti_thermal = thermal_zone_device_register(domain, + /* in case this is specified by DT */ + data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id, + data, __ti_thermal_get_temp, + __ti_thermal_get_trend); + if (IS_ERR(data->ti_thermal)) { + /* Create thermal zone */ + data->ti_thermal = thermal_zone_device_register(domain, OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops, NULL, FAST_TEMP_MONITORING_RATE, FAST_TEMP_MONITORING_RATE); - if (IS_ERR(data->ti_thermal)) { - dev_err(bgp->dev, "thermal zone device is NULL\n"); - return PTR_ERR(data->ti_thermal); + if (IS_ERR(data->ti_thermal)) { + dev_err(bgp->dev, "thermal zone device is NULL\n"); + return PTR_ERR(data->ti_thermal); + } + data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; + data->our_zone = true; } - data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; ti_bandgap_set_sensor_data(bgp, id, data); ti_bandgap_write_update_interval(bgp, data->sensor_id, data->ti_thermal->polling_delay); @@ -331,7 +361,13 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) data = ti_bandgap_get_sensor_data(bgp, id); - thermal_zone_device_unregister(data->ti_thermal); + if (data && data->ti_thermal) { + if (data->our_zone) + thermal_zone_device_unregister(data->ti_thermal); + else + thermal_zone_of_sensor_unregister(bgp->dev, + data->ti_thermal); + } return 0; } @@ -350,6 +386,15 @@ int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id) int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) { struct ti_thermal_data *data; + struct device_node *np = bgp->dev->of_node; + + /* + * We are assuming here that if one deploys the zone + * using DT, then it must be aware that the cooling device + * loading has to happen via cpufreq driver. + */ + if (of_find_property(np, "#thermal-sensor-cells", NULL)) + return 0; data = ti_bandgap_get_sensor_data(bgp, id); if (!data || IS_ERR(data)) @@ -380,7 +425,9 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) struct ti_thermal_data *data; data = ti_bandgap_get_sensor_data(bgp, id); - cpufreq_cooling_unregister(data->cool_dev); + + if (data && data->cool_dev) + cpufreq_cooling_unregister(data->cool_dev); return 0; } diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c index 7722cb9d5a8..972e1c73722 100644 --- a/drivers/thermal/x86_pkg_temp_thermal.c +++ b/drivers/thermal/x86_pkg_temp_thermal.c @@ -215,7 +215,7 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd, return 0; } -int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, +static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, unsigned long temp) { u32 l, h; |