diff options
Diffstat (limited to 'drivers/tty/rocket.c')
| -rw-r--r-- | drivers/tty/rocket.c | 288 |
1 files changed, 141 insertions, 147 deletions
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 82d35c5a58f..354564ea47c 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -150,12 +150,14 @@ static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { AIOP_INTR_BIT_3 }; +#ifdef CONFIG_PCI static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { UPCI_AIOP_INTR_BIT_0, UPCI_AIOP_INTR_BIT_1, UPCI_AIOP_INTR_BIT_2, UPCI_AIOP_INTR_BIT_3 }; +#endif static Byte_t RData[RDATASIZE] = { 0x00, 0x09, 0xf6, 0x82, @@ -227,7 +229,6 @@ static unsigned long nextLineNumber; static int __init init_ISA(int i); static void rp_wait_until_sent(struct tty_struct *tty, int timeout); static void rp_flush_buffer(struct tty_struct *tty); -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model); static unsigned char GetLineNumber(int ctrl, int aiop, int ch); static unsigned char SetLineNumber(int ctrl, int aiop, int ch); static void rp_start(struct tty_struct *tty); @@ -241,11 +242,6 @@ static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd); static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, ByteIO_t * AiopIOList, int AiopIOListSize, int IRQNum, Byte_t Frequency, int PeriodicOnly); @@ -1775,6 +1771,145 @@ static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = { }; MODULE_DEVICE_TABLE(pci, rocket_pci_ids); +/* Resets the speaker controller on RocketModem II and III devices */ +static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) +{ + ByteIO_t addr; + + /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ + if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { + addr = CtlP->AiopIO[0] + 0x4F; + sOutB(addr, 0); + } + + /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ + if ((model == MODEL_UPCI_RM3_8PORT) + || (model == MODEL_UPCI_RM3_4PORT)) { + addr = CtlP->AiopIO[0] + 0x88; + sOutB(addr, 0); + } +} + +/*************************************************************************** +Function: sPCIInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, + ByteIO_t * AiopIOList, int AiopIOListSize, + WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, + int PeriodicOnly, int altChanRingIndicator, + int UPCIRingInd) +{ + int i; + ByteIO_t io; + + CtlP->AltChanRingIndicator = altChanRingIndicator; + CtlP->UPCIRingInd = UPCIRingInd; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isPCI; /* controller release 1 */ + + if (ConfigIO) { + CtlP->isUPCI = 1; + CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; + CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; + CtlP->AiopIntrBits = upci_aiop_intr_bits; + } else { + CtlP->isUPCI = 0; + CtlP->PCIIO = + (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); + CtlP->AiopIntrBits = aiop_intr_bits; + } + + sPCIControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + break; /* done looking for AIOPs */ + + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + /* * Called when a PCI card is found. Retrieves and stores model information, * init's aiopic and serial port hardware. @@ -2519,147 +2654,6 @@ static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, return (CtlP->NumAiop); } -#ifdef CONFIG_PCI -/*************************************************************************** -Function: sPCIInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd) -{ - int i; - ByteIO_t io; - - CtlP->AltChanRingIndicator = altChanRingIndicator; - CtlP->UPCIRingInd = UPCIRingInd; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isPCI; /* controller release 1 */ - - if (ConfigIO) { - CtlP->isUPCI = 1; - CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; - CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; - CtlP->AiopIntrBits = upci_aiop_intr_bits; - } else { - CtlP->isUPCI = 0; - CtlP->PCIIO = - (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); - CtlP->AiopIntrBits = aiop_intr_bits; - } - - sPCIControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - break; /* done looking for AIOPs */ - - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/* Resets the speaker controller on RocketModem II and III devices */ -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) -{ - ByteIO_t addr; - - /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ - if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { - addr = CtlP->AiopIO[0] + 0x4F; - sOutB(addr, 0); - } - - /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ - if ((model == MODEL_UPCI_RM3_8PORT) - || (model == MODEL_UPCI_RM3_4PORT)) { - addr = CtlP->AiopIO[0] + 0x88; - sOutB(addr, 0); - } -} -#endif - /*************************************************************************** Function: sReadAiopID Purpose: Read the AIOP idenfication number directly from an AIOP. |