diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_core.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 11 |
1 files changed, 4 insertions, 7 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 2d4bd3929e5..27f7ad6b74c 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1926,13 +1926,8 @@ static void serial8250_put_poll_char(struct uart_port *port, wait_for_xmitr(up, BOTH_EMPTY); /* * Send the character out. - * If a LF, also do CR... */ serial_port_out(port, UART_TX, c); - if (c == 10) { - wait_for_xmitr(up, BOTH_EMPTY); - serial_port_out(port, UART_TX, 13); - } /* * Finally, wait for transmitter to become empty @@ -2338,9 +2333,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * the trigger, or the MCR RTS bit is cleared. In the case where * the remote UART is not using CTS auto flow control, we must * have sufficient FIFO entries for the latency of the remote - * UART to respond. IOW, at least 32 bytes of FIFO. + * UART to respond. IOW, at least 32 bytes of FIFO. Also enable + * AFE if hw flow control is supported */ - if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { + if ((up->capabilities & UART_CAP_AFE && (port->fifosize >= 32)) || + (port->flags & UPF_HARD_FLOW)) { up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE; |