summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/clps711x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/clps711x.c')
-rw-r--r--drivers/tty/serial/clps711x.c454
1 files changed, 261 insertions, 193 deletions
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 8d0b994357c..b0eacb83f83 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -21,44 +21,66 @@
#include <linux/console.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
-#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/io.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/ioport.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
-#include <mach/hardware.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/clps711x.h>
-#define UART_CLPS711X_NAME "uart-clps711x"
+#define UART_CLPS711X_DEVNAME "ttyCL"
#define UART_CLPS711X_NR 2
#define UART_CLPS711X_MAJOR 204
#define UART_CLPS711X_MINOR 40
-#define UBRLCR(port) ((port)->line ? UBRLCR2 : UBRLCR1)
-#define UARTDR(port) ((port)->line ? UARTDR2 : UARTDR1)
-#define SYSFLG(port) ((port)->line ? SYSFLG2 : SYSFLG1)
-#define SYSCON(port) ((port)->line ? SYSCON2 : SYSCON1)
-#define TX_IRQ(port) ((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1)
-#define RX_IRQ(port) ((port)->line ? IRQ_URXINT2 : IRQ_URXINT1)
+#define UARTDR_OFFSET (0x00)
+#define UBRLCR_OFFSET (0x40)
+
+#define UARTDR_FRMERR (1 << 8)
+#define UARTDR_PARERR (1 << 9)
+#define UARTDR_OVERR (1 << 10)
+
+#define UBRLCR_BAUD_MASK ((1 << 12) - 1)
+#define UBRLCR_BREAK (1 << 12)
+#define UBRLCR_PRTEN (1 << 13)
+#define UBRLCR_EVENPRT (1 << 14)
+#define UBRLCR_XSTOP (1 << 15)
+#define UBRLCR_FIFOEN (1 << 16)
+#define UBRLCR_WRDLEN5 (0 << 17)
+#define UBRLCR_WRDLEN6 (1 << 17)
+#define UBRLCR_WRDLEN7 (2 << 17)
+#define UBRLCR_WRDLEN8 (3 << 17)
+#define UBRLCR_WRDLEN_MASK (3 << 17)
struct clps711x_port {
- struct uart_driver uart;
- struct clk *uart_clk;
- struct uart_port port[UART_CLPS711X_NR];
- int tx_enabled[UART_CLPS711X_NR];
-#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
- struct console console;
-#endif
+ struct uart_port port;
+ unsigned int tx_enabled;
+ int rx_irq;
+ struct regmap *syscon;
+ bool use_ms;
+};
+
+static struct uart_driver clps711x_uart = {
+ .owner = THIS_MODULE,
+ .driver_name = UART_CLPS711X_DEVNAME,
+ .dev_name = UART_CLPS711X_DEVNAME,
+ .major = UART_CLPS711X_MAJOR,
+ .minor = UART_CLPS711X_MINOR,
+ .nr = UART_CLPS711X_NR,
};
static void uart_clps711x_stop_tx(struct uart_port *port)
{
struct clps711x_port *s = dev_get_drvdata(port->dev);
- if (s->tx_enabled[port->line]) {
- disable_irq(TX_IRQ(port));
- s->tx_enabled[port->line] = 0;
+ if (s->tx_enabled) {
+ disable_irq(port->irq);
+ s->tx_enabled = 0;
}
}
@@ -66,33 +88,27 @@ static void uart_clps711x_start_tx(struct uart_port *port)
{
struct clps711x_port *s = dev_get_drvdata(port->dev);
- if (!s->tx_enabled[port->line]) {
- enable_irq(TX_IRQ(port));
- s->tx_enabled[port->line] = 1;
+ if (!s->tx_enabled) {
+ s->tx_enabled = 1;
+ enable_irq(port->irq);
}
}
-static void uart_clps711x_stop_rx(struct uart_port *port)
-{
- disable_irq(RX_IRQ(port));
-}
-
-static void uart_clps711x_enable_ms(struct uart_port *port)
-{
- /* Do nothing */
-}
-
static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- unsigned int status, ch, flg;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ unsigned int status, flg;
+ u16 ch;
for (;;) {
- status = clps_readl(SYSFLG(port));
- if (status & SYSFLG_URXFE)
+ u32 sysflg = 0;
+
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ if (sysflg & SYSFLG_URXFE)
break;
- ch = clps_readw(UARTDR(port));
+ ch = readw(port->membase + UARTDR_OFFSET);
status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
ch &= 0xff;
@@ -138,23 +154,29 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
struct circ_buf *xmit = &port->state->xmit;
if (port->x_char) {
- clps_writew(port->x_char, UARTDR(port));
+ writew(port->x_char, port->membase + UARTDR_OFFSET);
port->icount.tx++;
port->x_char = 0;
return IRQ_HANDLED;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- disable_irq_nosync(TX_IRQ(port));
- s->tx_enabled[port->line] = 0;
+ if (s->tx_enabled) {
+ disable_irq_nosync(port->irq);
+ s->tx_enabled = 0;
+ }
return IRQ_HANDLED;
}
while (!uart_circ_empty(xmit)) {
- clps_writew(xmit->buf[xmit->tail], UARTDR(port));
+ u32 sysflg = 0;
+
+ writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
- if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF))
+
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ if (sysflg & SYSFLG_UTXFF)
break;
}
@@ -166,20 +188,28 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
{
- return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ u32 sysflg = 0;
+
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+
+ return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT;
}
static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
{
- unsigned int status, result = 0;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ unsigned int result = 0;
+
+ if (s->use_ms) {
+ u32 sysflg = 0;
- if (port->line == 0) {
- status = clps_readl(SYSFLG1);
- if (status & SYSFLG1_DCD)
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ if (sysflg & SYSFLG1_DCD)
result |= TIOCM_CAR;
- if (status & SYSFLG1_DSR)
+ if (sysflg & SYSFLG1_DSR)
result |= TIOCM_DSR;
- if (status & SYSFLG1_CTS)
+ if (sysflg & SYSFLG1_CTS)
result |= TIOCM_CTS;
} else
result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
@@ -194,65 +224,53 @@ static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
{
- unsigned long flags;
unsigned int ubrlcr;
- spin_lock_irqsave(&port->lock, flags);
-
- ubrlcr = clps_readl(UBRLCR(port));
+ ubrlcr = readl(port->membase + UBRLCR_OFFSET);
if (break_state)
ubrlcr |= UBRLCR_BREAK;
else
ubrlcr &= ~UBRLCR_BREAK;
- clps_writel(ubrlcr, UBRLCR(port));
+ writel(ubrlcr, port->membase + UBRLCR_OFFSET);
+}
+
+static void uart_clps711x_set_ldisc(struct uart_port *port, int ld)
+{
+ if (!port->line) {
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
- spin_unlock_irqrestore(&port->lock, flags);
+ regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
+ (ld == N_IRDA) ? SYSCON1_SIREN : 0);
+ }
}
static int uart_clps711x_startup(struct uart_port *port)
{
struct clps711x_port *s = dev_get_drvdata(port->dev);
- int ret;
-
- s->tx_enabled[port->line] = 1;
- /* Allocate the IRQs */
- ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx,
- 0, UART_CLPS711X_NAME " TX", port);
- if (ret)
- return ret;
-
- ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx,
- 0, UART_CLPS711X_NAME " RX", port);
- if (ret) {
- devm_free_irq(port->dev, TX_IRQ(port), port);
- return ret;
- }
/* Disable break */
- clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port));
+ writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK,
+ port->membase + UBRLCR_OFFSET);
/* Enable the port */
- clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port));
-
- return 0;
+ return regmap_update_bits(s->syscon, SYSCON_OFFSET,
+ SYSCON_UARTEN, SYSCON_UARTEN);
}
static void uart_clps711x_shutdown(struct uart_port *port)
{
- /* Free the interrupts */
- devm_free_irq(port->dev, TX_IRQ(port), port);
- devm_free_irq(port->dev, RX_IRQ(port), port);
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
/* Disable the port */
- clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port));
+ regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
}
static void uart_clps711x_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
{
- unsigned int ubrlcr, baud, quot;
- unsigned long flags;
+ u32 ubrlcr;
+ unsigned int baud, quot;
/* Mask termios capabilities we don't support */
termios->c_cflag &= ~CMSPAR;
@@ -291,8 +309,6 @@ static void uart_clps711x_set_termios(struct uart_port *port,
/* Enable FIFO */
ubrlcr |= UBRLCR_FIFOEN;
- spin_lock_irqsave(&port->lock, flags);
-
/* Set read status mask */
port->read_status_mask = UARTDR_OVERR;
if (termios->c_iflag & INPCK)
@@ -306,9 +322,7 @@ static void uart_clps711x_set_termios(struct uart_port *port,
uart_update_timeout(port, termios->c_cflag, baud);
- clps_writel(ubrlcr | (quot - 1), UBRLCR(port));
-
- spin_unlock_irqrestore(&port->lock, flags);
+ writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
}
static const char *uart_clps711x_type(struct uart_port *port)
@@ -322,14 +336,12 @@ static void uart_clps711x_config_port(struct uart_port *port, int flags)
port->type = PORT_CLPS711X;
}
-static void uart_clps711x_release_port(struct uart_port *port)
+static void uart_clps711x_nop_void(struct uart_port *port)
{
- /* Do nothing */
}
-static int uart_clps711x_request_port(struct uart_port *port)
+static int uart_clps711x_nop_int(struct uart_port *port)
{
- /* Do nothing */
return 0;
}
@@ -339,181 +351,237 @@ static const struct uart_ops uart_clps711x_ops = {
.get_mctrl = uart_clps711x_get_mctrl,
.stop_tx = uart_clps711x_stop_tx,
.start_tx = uart_clps711x_start_tx,
- .stop_rx = uart_clps711x_stop_rx,
- .enable_ms = uart_clps711x_enable_ms,
+ .stop_rx = uart_clps711x_nop_void,
+ .enable_ms = uart_clps711x_nop_void,
.break_ctl = uart_clps711x_break_ctl,
+ .set_ldisc = uart_clps711x_set_ldisc,
.startup = uart_clps711x_startup,
.shutdown = uart_clps711x_shutdown,
.set_termios = uart_clps711x_set_termios,
.type = uart_clps711x_type,
.config_port = uart_clps711x_config_port,
- .release_port = uart_clps711x_release_port,
- .request_port = uart_clps711x_request_port,
+ .release_port = uart_clps711x_nop_void,
+ .request_port = uart_clps711x_nop_int,
};
#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
{
- while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
- barrier();
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ u32 sysflg = 0;
+
+ do {
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ } while (sysflg & SYSFLG_UTXFF);
- clps_writew(ch, UARTDR(port));
+ writew(ch, port->membase + UARTDR_OFFSET);
}
static void uart_clps711x_console_write(struct console *co, const char *c,
unsigned n)
{
- struct clps711x_port *s = (struct clps711x_port *)co->data;
- struct uart_port *port = &s->port[co->index];
- u32 syscon;
-
- /* Ensure that the port is enabled */
- syscon = clps_readl(SYSCON(port));
- clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
+ struct uart_port *port = clps711x_uart.state[co->index].uart_port;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ u32 sysflg = 0;
uart_console_write(port, c, n, uart_clps711x_console_putchar);
/* Wait for transmitter to become empty */
- while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY)
- barrier();
-
- /* Restore the uart state */
- clps_writel(syscon, SYSCON(port));
+ do {
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ } while (sysflg & SYSFLG_UBUSY);
}
-static void uart_clps711x_console_get_options(struct uart_port *port,
- int *baud, int *parity,
- int *bits)
+static int uart_clps711x_console_setup(struct console *co, char *options)
{
- if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
- unsigned int ubrlcr, quot;
+ int baud = 38400, bits = 8, parity = 'n', flow = 'n';
+ int ret, index = co->index;
+ struct clps711x_port *s;
+ struct uart_port *port;
+ unsigned int quot;
+ u32 ubrlcr;
- ubrlcr = clps_readl(UBRLCR(port));
+ if (index < 0 || index >= UART_CLPS711X_NR)
+ return -EINVAL;
- *parity = 'n';
- if (ubrlcr & UBRLCR_PRTEN) {
- if (ubrlcr & UBRLCR_EVENPRT)
- *parity = 'e';
- else
- *parity = 'o';
- }
+ port = clps711x_uart.state[index].uart_port;
+ if (!port)
+ return -ENODEV;
- if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
- *bits = 7;
- else
- *bits = 8;
+ s = dev_get_drvdata(port->dev);
- quot = ubrlcr & UBRLCR_BAUD_MASK;
- *baud = port->uartclk / (16 * (quot + 1));
- }
-}
+ if (!options) {
+ u32 syscon = 0;
-static int uart_clps711x_console_setup(struct console *co, char *options)
-{
- int baud = 38400, bits = 8, parity = 'n', flow = 'n';
- struct clps711x_port *s = (struct clps711x_port *)co->data;
- struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
+ regmap_read(s->syscon, SYSCON_OFFSET, &syscon);
+ if (syscon & SYSCON_UARTEN) {
+ ubrlcr = readl(port->membase + UBRLCR_OFFSET);
+
+ if (ubrlcr & UBRLCR_PRTEN) {
+ if (ubrlcr & UBRLCR_EVENPRT)
+ parity = 'e';
+ else
+ parity = 'o';
+ }
+
+ if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
+ bits = 7;
- if (options)
+ quot = ubrlcr & UBRLCR_BAUD_MASK;
+ baud = port->uartclk / (16 * (quot + 1));
+ }
+ } else
uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- uart_clps711x_console_get_options(port, &baud, &parity, &bits);
- return uart_set_options(port, co, baud, parity, bits, flow);
+ ret = uart_set_options(port, co, baud, parity, bits, flow);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(s->syscon, SYSCON_OFFSET,
+ SYSCON_UARTEN, SYSCON_UARTEN);
}
+
+static struct console clps711x_console = {
+ .name = UART_CLPS711X_DEVNAME,
+ .device = uart_console_device,
+ .write = uart_clps711x_console_write,
+ .setup = uart_clps711x_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
#endif
static int uart_clps711x_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id;
struct clps711x_port *s;
- int ret, i;
+ struct resource *res;
+ struct clk *uart_clk;
- s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL);
- if (!s) {
- dev_err(&pdev->dev, "Error allocating port structure\n");
+ if (index < 0 || index >= UART_CLPS711X_NR)
+ return -EINVAL;
+
+ s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+ if (!s)
return -ENOMEM;
+
+ uart_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uart_clk))
+ return PTR_ERR(uart_clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ s->port.membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(s->port.membase))
+ return PTR_ERR(s->port.membase);
+
+ s->port.irq = platform_get_irq(pdev, 0);
+ if (IS_ERR_VALUE(s->port.irq))
+ return s->port.irq;
+
+ s->rx_irq = platform_get_irq(pdev, 1);
+ if (IS_ERR_VALUE(s->rx_irq))
+ return s->rx_irq;
+
+ if (!np) {
+ char syscon_name[9];
+
+ sprintf(syscon_name, "syscon.%i", index + 1);
+ s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name);
+ if (IS_ERR(s->syscon))
+ return PTR_ERR(s->syscon);
+
+ s->use_ms = !index;
+ } else {
+ s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(s->syscon))
+ return PTR_ERR(s->syscon);
+
+ if (!index)
+ s->use_ms = of_property_read_bool(np, "uart-use-ms");
}
+
+ s->port.line = index;
+ s->port.dev = &pdev->dev;
+ s->port.iotype = UPIO_MEM32;
+ s->port.mapbase = res->start;
+ s->port.type = PORT_CLPS711X;
+ s->port.fifosize = 16;
+ s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port.uartclk = clk_get_rate(uart_clk);
+ s->port.ops = &uart_clps711x_ops;
+
platform_set_drvdata(pdev, s);
- s->uart_clk = devm_clk_get(&pdev->dev, "uart");
- if (IS_ERR(s->uart_clk)) {
- dev_err(&pdev->dev, "Can't get UART clocks\n");
- return PTR_ERR(s->uart_clk);
- }
+ ret = uart_add_one_port(&clps711x_uart, &s->port);
+ if (ret)
+ return ret;
- s->uart.owner = THIS_MODULE;
- s->uart.dev_name = "ttyCL";
- s->uart.major = UART_CLPS711X_MAJOR;
- s->uart.minor = UART_CLPS711X_MINOR;
- s->uart.nr = UART_CLPS711X_NR;
-#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
- s->uart.cons = &s->console;
- s->uart.cons->device = uart_console_device;
- s->uart.cons->write = uart_clps711x_console_write;
- s->uart.cons->setup = uart_clps711x_console_setup;
- s->uart.cons->flags = CON_PRINTBUFFER;
- s->uart.cons->index = -1;
- s->uart.cons->data = s;
- strcpy(s->uart.cons->name, "ttyCL");
-#endif
- ret = uart_register_driver(&s->uart);
+ /* Disable port */
+ if (!uart_console(&s->port))
+ regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
+
+ s->tx_enabled = 1;
+
+ ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0,
+ dev_name(&pdev->dev), &s->port);
if (ret) {
- dev_err(&pdev->dev, "Registering UART driver failed\n");
+ uart_remove_one_port(&clps711x_uart, &s->port);
return ret;
}
- for (i = 0; i < UART_CLPS711X_NR; i++) {
- s->port[i].line = i;
- s->port[i].dev = &pdev->dev;
- s->port[i].irq = TX_IRQ(&s->port[i]);
- s->port[i].iobase = SYSCON(&s->port[i]);
- s->port[i].type = PORT_CLPS711X;
- s->port[i].fifosize = 16;
- s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
- s->port[i].uartclk = clk_get_rate(s->uart_clk);
- s->port[i].ops = &uart_clps711x_ops;
- WARN_ON(uart_add_one_port(&s->uart, &s->port[i]));
- }
+ ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0,
+ dev_name(&pdev->dev), &s->port);
+ if (ret)
+ uart_remove_one_port(&clps711x_uart, &s->port);
- return 0;
+ return ret;
}
static int uart_clps711x_remove(struct platform_device *pdev)
{
struct clps711x_port *s = platform_get_drvdata(pdev);
- int i;
- for (i = 0; i < UART_CLPS711X_NR; i++)
- uart_remove_one_port(&s->uart, &s->port[i]);
-
- uart_unregister_driver(&s->uart);
-
- return 0;
+ return uart_remove_one_port(&clps711x_uart, &s->port);
}
-static struct platform_driver clps711x_uart_driver = {
+static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
+ { .compatible = "cirrus,clps711x-uart", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids);
+
+static struct platform_driver clps711x_uart_platform = {
.driver = {
- .name = UART_CLPS711X_NAME,
- .owner = THIS_MODULE,
+ .name = "clps711x-uart",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(clps711x_uart_dt_ids),
},
.probe = uart_clps711x_probe,
.remove = uart_clps711x_remove,
};
-module_platform_driver(clps711x_uart_driver);
-
-static struct platform_device clps711x_uart_device = {
- .name = UART_CLPS711X_NAME,
-};
static int __init uart_clps711x_init(void)
{
- return platform_device_register(&clps711x_uart_device);
+ int ret;
+
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ clps711x_uart.cons = &clps711x_console;
+ clps711x_console.data = &clps711x_uart;
+#endif
+
+ ret = uart_register_driver(&clps711x_uart);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&clps711x_uart_platform);
}
module_init(uart_clps711x_init);
static void __exit uart_clps711x_exit(void)
{
- platform_device_unregister(&clps711x_uart_device);
+ platform_driver_unregister(&clps711x_uart_platform);
+ uart_unregister_driver(&clps711x_uart);
}
module_exit(uart_clps711x_exit);