diff options
Diffstat (limited to 'drivers/tty/serial/omap-serial.c')
| -rw-r--r-- | drivers/tty/serial/omap-serial.c | 51 |
1 files changed, 33 insertions, 18 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 57d6b29c039..4dc41408ecb 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -59,6 +59,7 @@ /* SCR register bitmasks */ #define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK (1 << 6) #define OMAP_UART_SCR_TX_EMPTY (1 << 3) /* FCR register bitmasks */ @@ -232,24 +233,42 @@ static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) } /* + * serial_omap_baud_is_mode16 - check if baud rate is MODE16X + * @port: uart port info + * @baud: baudrate for which mode needs to be determined + * + * Returns true if baud rate is MODE16X and false if MODE13X + * Original table in OMAP TRM named "UART Mode Baud Rates, Divisor Values, + * and Error Rates" determines modes not for all common baud rates. + * E.g. for 1000000 baud rate mode must be 16x, but according to that + * table it's determined as 13x. + */ +static bool +serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud) +{ + unsigned int n13 = port->uartclk / (13 * baud); + unsigned int n16 = port->uartclk / (16 * baud); + int baudAbsDiff13 = baud - (port->uartclk / (13 * n13)); + int baudAbsDiff16 = baud - (port->uartclk / (16 * n16)); + if(baudAbsDiff13 < 0) + baudAbsDiff13 = -baudAbsDiff13; + if(baudAbsDiff16 < 0) + baudAbsDiff16 = -baudAbsDiff16; + + return (baudAbsDiff13 > baudAbsDiff16); +} + +/* * serial_omap_get_divisor - calculate divisor value * @port: uart port info * @baud: baudrate for which divisor needs to be calculated. - * - * We have written our own function to get the divisor so as to support - * 13x mode. 3Mbps Baudrate as an different divisor. - * Reference OMAP TRM Chapter 17: - * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates - * referring to oversampling - divisor value - * baudrate 460,800 to 3,686,400 all have divisor 13 - * except 3,000,000 which has divisor value 16 */ static unsigned int serial_omap_get_divisor(struct uart_port *port, unsigned int baud) { unsigned int divisor; - if (baud > OMAP_MODE13X_SPEED && baud != 3000000) + if (!serial_omap_baud_is_mode16(port, baud)) divisor = 13; else divisor = 16; @@ -302,9 +321,6 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr) struct circ_buf *xmit = &up->port.state->xmit; int count; - if (!(lsr & UART_LSR_THRE)) - return; - if (up->port.x_char) { serial_out(up, UART_TX, up->port.x_char); up->port.icount.tx++; @@ -483,7 +499,6 @@ static void serial_omap_rdi(struct uart_omap_port *up, unsigned int lsr) static irqreturn_t serial_omap_irq(int irq, void *dev_id) { struct uart_omap_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; unsigned int iir, lsr; unsigned int type; irqreturn_t ret = IRQ_NONE; @@ -530,7 +545,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id) spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&up->port.state->port); pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); @@ -776,6 +791,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, cval |= UART_LCR_PARITY; if (!(termios->c_cflag & PARODD)) cval |= UART_LCR_EPAR; + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; /* * Ask the core to calculate the divisor for us. @@ -845,7 +862,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, cval); /* reset DLAB */ up->lcr = cval; - up->scr = OMAP_UART_SCR_TX_EMPTY; + up->scr = 0; /* FIFOs and DMA Settings */ @@ -869,8 +886,6 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); /* FIFO ENABLE, DMA MODE */ - up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; - /* Set receive FIFO threshold to 16 characters and * transmit FIFO threshold to 16 spaces */ @@ -915,7 +930,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, cval); - if (baud > 230400 && baud != 3000000) + if (!serial_omap_baud_is_mode16(port, baud)) up->mdr1 = UART_OMAP_MDR1_13X_MODE; else up->mdr1 = UART_OMAP_MDR1_16X_MODE; |