summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/omap-serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/omap-serial.c')
-rw-r--r--drivers/tty/serial/omap-serial.c94
1 files changed, 19 insertions, 75 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 08b6b9419f0..d017cec8a34 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -163,10 +163,6 @@ struct uart_omap_port {
u8 wakeups_enabled;
u32 features;
- int DTR_gpio;
- int DTR_inverted;
- int DTR_active;
-
struct serial_rs485 rs485;
int rts_gpio;
@@ -184,8 +180,6 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
-static struct workqueue_struct *serial_omap_uart_wq;
-
static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
{
offset <<= up->port.regshift;
@@ -398,11 +392,8 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
break;
} while (--count > 0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
- spin_unlock(&up->port.lock);
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- spin_lock(&up->port.lock);
- }
if (uart_circ_empty(xmit))
serial_omap_stop_tx(&up->port);
@@ -697,16 +688,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
serial_out(up, UART_MCR, up->mcr);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
-
- if (gpio_is_valid(up->DTR_gpio) &&
- !!(mctrl & TIOCM_DTR) != up->DTR_active) {
- up->DTR_active = !up->DTR_active;
- if (gpio_cansleep(up->DTR_gpio))
- schedule_work(&up->qos_work);
- else
- gpio_set_value(up->DTR_gpio,
- up->DTR_active != up->DTR_inverted);
- }
}
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -850,9 +831,6 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
qos_work);
pm_qos_update_request(&up->pm_qos_request, up->latency);
- if (gpio_is_valid(up->DTR_gpio))
- gpio_set_value_cansleep(up->DTR_gpio,
- up->DTR_active != up->DTR_inverted);
}
static void
@@ -1420,7 +1398,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
switch (cmd) {
case TIOCSRS485:
- if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
+ if (copy_from_user(&rs485conf, (void __user *) arg,
sizeof(rs485conf)))
return -EFAULT;
@@ -1428,7 +1406,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
break;
case TIOCGRS485:
- if (copy_to_user((struct serial_rs485 *) arg,
+ if (copy_to_user((void __user *) arg,
&(to_uart_omap_port(port)->rs485),
sizeof(rs485conf)))
return -EFAULT;
@@ -1614,7 +1592,7 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
/* check for tx enable gpio */
up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags);
if (gpio_is_valid(up->rts_gpio)) {
- ret = gpio_request(up->rts_gpio, "omap-serial");
+ ret = devm_gpio_request(up->dev, up->rts_gpio, "omap-serial");
if (ret < 0)
return ret;
ret = gpio_direction_output(up->rts_gpio,
@@ -1644,10 +1622,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
static int serial_omap_probe(struct platform_device *pdev)
{
- struct uart_omap_port *up;
- struct resource *mem, *irq;
struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
- int ret, uartirq = 0, wakeirq = 0;
+ struct uart_omap_port *up;
+ struct resource *mem;
+ void __iomem *base;
+ int uartirq = 0;
+ int wakeirq = 0;
+ int ret;
/* The optional wakeirq may be specified in the board dts file */
if (pdev->dev.of_node) {
@@ -1658,48 +1639,19 @@ static int serial_omap_probe(struct platform_device *pdev)
omap_up_info = of_get_uart_port_info(&pdev->dev);
pdev->dev.platform_data = omap_up_info;
} else {
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no irq resource?\n");
- return -ENODEV;
- }
- uartirq = irq->start;
- }
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -ENODEV;
- }
-
- if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
- pdev->dev.driver->name)) {
- dev_err(&pdev->dev, "memory region already claimed\n");
- return -EBUSY;
- }
-
- if (gpio_is_valid(omap_up_info->DTR_gpio) &&
- omap_up_info->DTR_present) {
- ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial");
- if (ret < 0)
- return ret;
- ret = gpio_direction_output(omap_up_info->DTR_gpio,
- omap_up_info->DTR_inverted);
- if (ret < 0)
- return ret;
+ uartirq = platform_get_irq(pdev, 0);
+ if (uartirq < 0)
+ return -EPROBE_DEFER;
}
up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
- if (gpio_is_valid(omap_up_info->DTR_gpio) &&
- omap_up_info->DTR_present) {
- up->DTR_gpio = omap_up_info->DTR_gpio;
- up->DTR_inverted = omap_up_info->DTR_inverted;
- } else
- up->DTR_gpio = -EINVAL;
- up->DTR_active = 0;
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
up->dev = &pdev->dev;
up->port.dev = &pdev->dev;
@@ -1733,14 +1685,7 @@ static int serial_omap_probe(struct platform_device *pdev)
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
- up->port.membase = devm_ioremap(&pdev->dev, mem->start,
- resource_size(mem));
- if (!up->port.membase) {
- dev_err(&pdev->dev, "can't ioremap UART\n");
- ret = -ENOMEM;
- goto err_ioremap;
- }
-
+ up->port.membase = base;
up->port.flags = omap_up_info->flags;
up->port.uartclk = omap_up_info->uartclk;
if (!up->port.uartclk) {
@@ -1754,12 +1699,12 @@ static int serial_omap_probe(struct platform_device *pdev)
up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
pm_qos_add_request(&up->pm_qos_request,
PM_QOS_CPU_DMA_LATENCY, up->latency);
- serial_omap_uart_wq = create_singlethread_workqueue(up->name);
INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
platform_set_drvdata(pdev, up);
if (omap_up_info->autosuspend_timeout == 0)
omap_up_info->autosuspend_timeout = -1;
+
device_init_wakeup(up->dev, true);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
@@ -1786,7 +1731,6 @@ static int serial_omap_probe(struct platform_device *pdev)
err_add_port:
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
-err_ioremap:
err_rs485:
err_port_line:
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",