1 files changed, 383 insertions, 257 deletions

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index b31f1c3a2c4..c55e5fb16fa 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
+#include <linux/of.h>
 
 #include <asm/irq.h>
 
@@ -49,6 +50,7 @@
 #include <mach/map.h>
 
 #include <plat/regs-serial.h>
+#include <plat/clock.h>
 
 #include "samsung.h"
 
@@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p
 
 static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport;
+
 	if (port->dev == NULL)
 		return NULL;
 
-	return (struct s3c2410_uartcfg *)port->dev->platform_data;
+	ourport = container_of(port, struct s3c24xx_uart_port, port);
+	return ourport->cfg;
 }
 
 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
@@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
 	struct s3c24xx_uart_info *info = ourport->info;
 
 	if (ufstat & info->rx_fifofull)
-		return info->fifosize;
+		return ourport->port.fifosize;
 
 	return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
 }
@@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
  *
 */
 
+#define MAX_CLK_NAME_LENGTH 15
 
-#define MAX_CLKS (8)
-
-static struct s3c24xx_uart_clksrc tmp_clksrc = {
-	.name		= "pclk",
-	.min_baud	= 0,
-	.max_baud	= 0,
-	.divisor	= 1,
-};
-
-static inline int
-s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+static inline int s3c24xx_serial_getsource(struct uart_port *port)
 {
 	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned int ucon;
 
-	return (info->get_clksrc)(port, c);
-}
-
-static inline int
-s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	if (info->num_clks == 1)
+		return 0;
 
-	return (info->set_clksrc)(port, c);
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= info->clksel_mask;
+	return ucon >> info->clksel_shift;
 }
 
-struct baud_calc {
-	struct s3c24xx_uart_clksrc	*clksrc;
-	unsigned int			 calc;
-	unsigned int			 divslot;
-	unsigned int			 quot;
-	struct clk			*src;
-};
-
-static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
-				   struct uart_port *port,
-				   struct s3c24xx_uart_clksrc *clksrc,
-				   unsigned int baud)
+static void s3c24xx_serial_setsource(struct uart_port *port,
+			unsigned int clk_sel)
 {
-	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	unsigned long rate;
-
-	calc->src = clk_get(port->dev, clksrc->name);
-	if (calc->src == NULL || IS_ERR(calc->src))
-		return 0;
-
-	rate = clk_get_rate(calc->src);
-	rate /= clksrc->divisor;
+	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned int ucon;
 
-	calc->clksrc = clksrc;
+	if (info->num_clks == 1)
+		return;
 
-	if (ourport->info->has_divslot) {
-		unsigned long div = rate / baud;
-
-		/* The UDIVSLOT register on the newer UARTs allows us to
-		 * get a divisor adjustment of 1/16th on the baud clock.
-		 *
-		 * We don't keep the UDIVSLOT value (the 16ths we calculated
-		 * by not multiplying the baud by 16) as it is easy enough
-		 * to recalculate.
-		 */
-
-		calc->quot = div / 16;
-		calc->calc = rate / div;
-	} else {
-		calc->quot = (rate + (8 * baud)) / (16 * baud);
-		calc->calc = (rate / (calc->quot * 16));
-	}
+	ucon = rd_regl(port, S3C2410_UCON);
+	if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
+		return;
 
-	calc->quot--;
-	return 1;
+	ucon &= ~info->clksel_mask;
+	ucon |= clk_sel << info->clksel_shift;
+	wr_regl(port, S3C2410_UCON, ucon);
 }
 
-static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
-					  struct s3c24xx_uart_clksrc **clksrc,
-					  struct clk **clk,
-					  unsigned int baud)
+static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
+			unsigned int req_baud, struct clk **best_clk,
+			unsigned int *clk_num)
 {
-	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
-	struct s3c24xx_uart_clksrc *clkp;
-	struct baud_calc res[MAX_CLKS];
-	struct baud_calc *resptr, *best, *sptr;
-	int i;
-
-	clkp = cfg->clocks;
-	best = NULL;
-
-	if (cfg->clocks_size < 2) {
-		if (cfg->clocks_size == 0)
-			clkp = &tmp_clksrc;
-
-		/* check to see if we're sourcing fclk, and if so we're
-		 * going to have to update the clock source
-		 */
-
-		if (strcmp(clkp->name, "fclk") == 0) {
-			struct s3c24xx_uart_clksrc src;
-
-			s3c24xx_serial_getsource(port, &src);
-
-			/* check that the port already using fclk, and if
-			 * not, then re-select fclk
+	struct s3c24xx_uart_info *info = ourport->info;
+	struct clk *clk;
+	unsigned long rate;
+	unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+	char clkname[MAX_CLK_NAME_LENGTH];
+	int calc_deviation, deviation = (1 << 30) - 1;
+
+	*best_clk = NULL;
+	clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
+			ourport->info->def_clk_sel;
+	for (cnt = 0; cnt < info->num_clks; cnt++) {
+		if (!(clk_sel & (1 << cnt)))
+			continue;
+
+		sprintf(clkname, "clk_uart_baud%d", cnt);
+		clk = clk_get(ourport->port.dev, clkname);
+		if (IS_ERR_OR_NULL(clk))
+			continue;
+
+		rate = clk_get_rate(clk);
+		if (!rate)
+			continue;
+
+		if (ourport->info->has_divslot) {
+			unsigned long div = rate / req_baud;
+
+			/* The UDIVSLOT register on the newer UARTs allows us to
+			 * get a divisor adjustment of 1/16th on the baud clock.
+			 *
+			 * We don't keep the UDIVSLOT value (the 16ths we
+			 * calculated by not multiplying the baud by 16) as it
+			 * is easy enough to recalculate.
 			 */
 
-			if (strcmp(src.name, clkp->name) == 0) {
-				s3c24xx_serial_setsource(port, clkp);
-				s3c24xx_serial_getsource(port, &src);
-			}
-
-			clkp->divisor = src.divisor;
-		}
-
-		s3c24xx_serial_calcbaud(res, port, clkp, baud);
-		best = res;
-		resptr = best + 1;
-	} else {
-		resptr = res;
-
-		for (i = 0; i < cfg->clocks_size; i++, clkp++) {
-			if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
-				resptr++;
+			quot = div / 16;
+			baud = rate / div;
+		} else {
+			quot = (rate + (8 * req_baud)) / (16 * req_baud);
+			baud = rate / (quot * 16);
 		}
-	}
-
-	/* ok, we now need to select the best clock we found */
-
-	if (!best) {
-		unsigned int deviation = (1<<30)|((1<<30)-1);
-		int calc_deviation;
+		quot--;
 
-		for (sptr = res; sptr < resptr; sptr++) {
-			calc_deviation = baud - sptr->calc;
-			if (calc_deviation < 0)
-				calc_deviation = -calc_deviation;
+		calc_deviation = req_baud - baud;
+		if (calc_deviation < 0)
+			calc_deviation = -calc_deviation;
 
-			if (calc_deviation < deviation) {
-				best = sptr;
-				deviation = calc_deviation;
-			}
+		if (calc_deviation < deviation) {
+			*best_clk = clk;
+			best_quot = quot;
+			*clk_num = cnt;
+			deviation = calc_deviation;
 		}
 	}
 
-	/* store results to pass back */
-
-	*clksrc = best->clksrc;
-	*clk    = best->src;
-
-	return best->quot;
+	return best_quot;
 }
 
 /* udivslot_table[]
@@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 {
 	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	struct s3c24xx_uart_clksrc *clksrc = NULL;
 	struct clk *clk = NULL;
 	unsigned long flags;
-	unsigned int baud, quot;
+	unsigned int baud, quot, clk_sel = 0;
 	unsigned int ulcon;
 	unsigned int umcon;
 	unsigned int udivslot = 0;
@@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	 */
 
 	baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
-
+	quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
 	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
 		quot = port->custom_divisor;
-	else
-		quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+	if (!clk)
+		return;
 
 	/* check to see if we need  to change clock source */
 
-	if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
-		dbg("selecting clock %p\n", clk);
-		s3c24xx_serial_setsource(port, clksrc);
+	if (ourport->baudclk != clk) {
+		s3c24xx_serial_setsource(port, clk_sel);
 
 		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
 			clk_disable(ourport->baudclk);
@@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		clk_enable(clk);
 
-		ourport->clksrc = clksrc;
 		ourport->baudclk = clk;
 		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
 	}
@@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
 
 /* s3c24xx_serial_resetport
  *
- * wrapper to call the specific reset for this port (reset the fifos
- * and the settings)
+ * reset the fifos and other the settings.
 */
 
-static inline int s3c24xx_serial_resetport(struct uart_port *port,
-					   struct s3c2410_uartcfg *cfg)
+static void s3c24xx_serial_resetport(struct uart_port *port,
+				   struct s3c2410_uartcfg *cfg)
 {
 	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+	unsigned int ucon_mask;
+
+	ucon_mask = info->clksel_mask;
+	if (info->type == PORT_S3C2440)
+		ucon_mask |= S3C2440_UCON0_DIVMASK;
 
-	return (info->reset_port)(port, cfg);
+	ucon &= ucon_mask;
+	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
+
+	/* reset both fifos */
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	/* some delay is required after fifo reset */
+	udelay(1);
 }
 
 
@@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p
  */
 
 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
-				    struct s3c24xx_uart_info *info,
 				    struct platform_device *platdev)
 {
 	struct uart_port *port = &ourport->port;
-	struct s3c2410_uartcfg *cfg;
+	struct s3c2410_uartcfg *cfg = ourport->cfg;
 	struct resource *res;
 	int ret;
 
@@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	if (platdev == NULL)
 		return -ENODEV;
 
-	cfg = s3c24xx_dev_to_cfg(&platdev->dev);
-
 	if (port->mapbase != 0)
 		return 0;
 
-	if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
-		printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
-		       cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
-		return -ERANGE;
-	}
-
 	/* setup info for port */
 	port->dev	= &platdev->dev;
-	ourport->info	= info;
 
 	/* Startup sequence is different for s3c64xx and higher SoC's */
 	if (s3c24xx_serial_has_interrupt_mask(port))
 		s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
 
-	/* copy the info in from provided structure */
-	ourport->port.fifosize = info->fifosize;
-
-	dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
-
 	port->uartclk = 1;
 
 	if (cfg->uart_flags & UPF_CONS_FLOW) {
@@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
 	struct uart_port *port = s3c24xx_dev_to_port(dev);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
-	return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
+	return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
 }
 
 static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
 
+
 /* Device driver serial port probe */
 
+static const struct of_device_id s3c24xx_uart_dt_match[];
 static int probe_index;
 
-int s3c24xx_serial_probe(struct platform_device *dev,
-			 struct s3c24xx_uart_info *info)
+static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
+			struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
+		return (struct s3c24xx_serial_drv_data *)match->data;
+	}
+#endif
+	return (struct s3c24xx_serial_drv_data *)
+			platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_serial_probe(struct platform_device *pdev)
 {
 	struct s3c24xx_uart_port *ourport;
 	int ret;
 
-	dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
+	dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index);
 
 	ourport = &s3c24xx_serial_ports[probe_index];
+
+	ourport->drv_data = s3c24xx_get_driver_data(pdev);
+	if (!ourport->drv_data) {
+		dev_err(&pdev->dev, "could not find driver data\n");
+		return -ENODEV;
+	}
+
+	ourport->info = ourport->drv_data->info;
+	ourport->cfg = (pdev->dev.platform_data) ?
+			(struct s3c2410_uartcfg *)pdev->dev.platform_data :
+			ourport->drv_data->def_cfg;
+
+	ourport->port.fifosize = (ourport->info->fifosize) ?
+		ourport->info->fifosize :
+		ourport->drv_data->fifosize[probe_index];
+
 	probe_index++;
 
 	dbg("%s: initialising port %p...\n", __func__, ourport);
 
-	ret = s3c24xx_serial_init_port(ourport, info, dev);
+	ret = s3c24xx_serial_init_port(ourport, pdev);
 	if (ret < 0)
 		goto probe_err;
 
 	dbg("%s: adding port\n", __func__);
 	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
-	platform_set_drvdata(dev, &ourport->port);
+	platform_set_drvdata(pdev, &ourport->port);
 
-	ret = device_create_file(&dev->dev, &dev_attr_clock_source);
+	ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
 	if (ret < 0)
-		printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+		dev_err(&pdev->dev, "failed to add clock source attr.\n");
 
 	ret = s3c24xx_serial_cpufreq_register(ourport);
 	if (ret < 0)
-		dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+		dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
 
 	return 0;
 
@@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev,
 	return ret;
 }
 
-EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
-
-int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
 
@@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev)
 	return 0;
 }
 
-EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
-
 /* UART power management code */
 #ifdef CONFIG_PM_SLEEP
 static int s3c24xx_serial_suspend(struct device *dev)
@@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
 #define SERIAL_SAMSUNG_PM_OPS	NULL
 #endif /* CONFIG_PM_SLEEP */
 
-int s3c24xx_serial_init(struct platform_driver *drv,
-			struct s3c24xx_uart_info *info)
-{
-	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
-	drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
-
-	return platform_driver_register(drv);
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
-
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
-	int ret;
-
-	ret = uart_register_driver(&s3c24xx_uart_drv);
-	if (ret < 0) {
-		printk(KERN_ERR "failed to register UART driver\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
-	uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
-
 /* Console code */
 
 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
@@ -1395,12 +1331,13 @@ static void __init
 s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 			   int *parity, int *bits)
 {
-	struct s3c24xx_uart_clksrc clksrc;
 	struct clk *clk;
 	unsigned int ulcon;
 	unsigned int ucon;
 	unsigned int ubrdiv;
 	unsigned long rate;
+	unsigned int clk_sel;
+	char clk_name[MAX_CLK_NAME_LENGTH];
 
 	ulcon  = rd_regl(port, S3C2410_ULCON);
 	ucon   = rd_regl(port, S3C2410_UCON);
@@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 
 		/* now calculate the baud rate */
 
-		s3c24xx_serial_getsource(port, &clksrc);
+		clk_sel = s3c24xx_serial_getsource(port);
+		sprintf(clk_name, "clk_uart_baud%d", clk_sel);
 
-		clk = clk_get(port->dev, clksrc.name);
+		clk = clk_get(port->dev, clk_name);
 		if (!IS_ERR(clk) && clk != NULL)
-			rate = clk_get_rate(clk) / clksrc.divisor;
+			rate = clk_get_rate(clk);
 		else
 			rate = 1;
 
-
 		*baud = rate / (16 * (ubrdiv + 1));
 		dbg("calculated baud %d\n", *baud);
 	}
 
 }
 
-/* s3c24xx_serial_init_ports
- *
- * initialise the serial ports from the machine provided initialisation
- * data.
-*/
-
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
-{
-	struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
-	struct platform_device **platdev_ptr;
-	int i;
-
-	dbg("s3c24xx_serial_init_ports: initialising ports...\n");
-
-	platdev_ptr = s3c24xx_uart_devs;
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
-		s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
-	}
-
-	return 0;
-}
-
 static int __init
 s3c24xx_serial_console_setup(struct console *co, char *options)
 {
@@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-/* s3c24xx_serial_initconsole
- *
- * initialise the console from one of the uart drivers
-*/
-
 static struct console s3c24xx_serial_console = {
 	.name		= S3C24XX_SERIAL_NAME,
 	.device		= uart_console_device,
@@ -1540,34 +1449,251 @@ static struct console s3c24xx_serial_console = {
 	.setup		= s3c24xx_serial_console_setup,
 	.data		= &s3c24xx_uart_drv,
 };
+#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
 
-int s3c24xx_serial_initconsole(struct platform_driver *drv,
-			       struct s3c24xx_uart_info **info)
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C2410 UART",
+		.type		= PORT_S3C2410,
+		.fifosize	= 16,
+		.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 2,
+		.clksel_mask	= S3C2410_UCON_CLKMASK,
+		.clksel_shift	= S3C2410_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
+#else
+#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-{
-	struct platform_device *dev = s3c24xx_uart_devs[0];
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C2412 UART",
+		.type		= PORT_S3C2412,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C2412_UCON_CLKMASK,
+		.clksel_shift	= S3C2412_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
+#else
+#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	dbg("s3c24xx_serial_initconsole\n");
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
+	defined(CONFIG_CPU_S3C2443)
+static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C2440 UART",
+		.type		= PORT_S3C2440,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C2412_UCON_CLKMASK,
+		.clksel_shift	= S3C2412_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
+#else
+#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	/* select driver based on the cpu */
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \
+	defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \
+	defined(CONFIG_CPU_S5PC100)
+static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S3C6400 UART",
+		.type		= PORT_S3C6400,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C6400_UCON_CLKMASK,
+		.clksel_shift	= S3C6400_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
+#else
+#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	if (dev == NULL) {
-		printk(KERN_ERR "s3c24xx: no devices for console init\n");
-		return 0;
-	}
+#ifdef CONFIG_CPU_S5PV210
+static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung S5PV210 UART",
+		.type		= PORT_S3C6400,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 2,
+		.clksel_mask	= S5PV210_UCON_CLKMASK,
+		.clksel_shift	= S5PV210_UCON_CLKSHIFT,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	.fifosize = { 256, 64, 16, 16 },
+};
+#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
+#else
+#define S5PV210_SERIAL_DRV_DATA	(kernel_ulong_t)NULL
+#endif
 
-	if (strcmp(dev->name, drv->driver.name) != 0)
-		return 0;
+#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
+	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
+static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Samsung Exynos4 UART",
+		.type		= PORT_S3C6400,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 1,
+		.clksel_mask	= 0,
+		.clksel_shift	= 0,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.has_fracval	= 1,
+	},
+	.fifosize = { 256, 64, 16, 16 },
+};
+#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#else
+#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
 
-	s3c24xx_serial_console.data = &s3c24xx_uart_drv;
-	s3c24xx_serial_init_ports(info);
+static struct platform_device_id s3c24xx_serial_driver_ids[] = {
+	{
+		.name		= "s3c2410-uart",
+		.driver_data	= S3C2410_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c2412-uart",
+		.driver_data	= S3C2412_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c2440-uart",
+		.driver_data	= S3C2440_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c6400-uart",
+		.driver_data	= S3C6400_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s5pv210-uart",
+		.driver_data	= S5PV210_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos4210-uart",
+		.driver_data	= EXYNOS4210_SERIAL_DRV_DATA,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
 
-	register_console(&s3c24xx_serial_console);
-	return 0;
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_uart_dt_match[] = {
+	{ .compatible = "samsung,exynos4210-uart",
+		.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
+#else
+#define s3c24xx_uart_dt_match NULL
+#endif
+
+static struct platform_driver samsung_serial_driver = {
+	.probe		= s3c24xx_serial_probe,
+	.remove		= __devexit_p(s3c24xx_serial_remove),
+	.id_table	= s3c24xx_serial_driver_ids,
+	.driver		= {
+		.name	= "samsung-uart",
+		.owner	= THIS_MODULE,
+		.pm	= SERIAL_SAMSUNG_PM_OPS,
+		.of_match_table	= s3c24xx_uart_dt_match,
+	},
+};
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&s3c24xx_uart_drv);
+	if (ret < 0) {
+		printk(KERN_ERR "failed to register UART driver\n");
+		return -1;
+	}
+
+	return platform_driver_register(&samsung_serial_driver);
 }
 
-#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+static void __exit s3c24xx_serial_modexit(void)
+{
+	uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
 
+MODULE_ALIAS("platform:samsung-uart");
 MODULE_DESCRIPTION("Samsung SoC Serial port driver");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL v2");