diff options
Diffstat (limited to 'drivers/tty/serial/sh-sci.c')
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 49 |
1 files changed, 44 insertions, 5 deletions
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 3158e17b665..4604153b795 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1052,9 +1052,17 @@ static int sci_request_irq(struct sci_port *port) if (SCIx_IRQ_IS_MUXED(port)) { i = SCIx_MUX_IRQ; irq = up->irq; - } else + } else { irq = port->cfg->irqs[i]; + /* + * Certain port types won't support all of the + * available interrupt sources. + */ + if (unlikely(!irq)) + continue; + } + desc = sci_irq_desc + i; port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", dev_name(up->dev), desc->desc); @@ -1094,6 +1102,15 @@ static void sci_free_irq(struct sci_port *port) * IRQ first. */ for (i = 0; i < SCIx_NR_IRQS; i++) { + unsigned int irq = port->cfg->irqs[i]; + + /* + * Certain port types won't support all of the available + * interrupt sources. + */ + if (unlikely(!irq)) + continue; + free_irq(port->cfg->irqs[i], port); kfree(port->irqstr[i]); @@ -1564,10 +1581,32 @@ static void sci_enable_ms(struct uart_port *port) static void sci_break_ctl(struct uart_port *port, int break_state) { - /* - * Not supported by hardware. Most parts couple break and rx - * interrupts together, with break detection always enabled. - */ + struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; + unsigned short scscr, scsptr; + + /* check wheter the port has SCSPTR */ + if (!reg->size) { + /* + * Not supported by hardware. Most parts couple break and rx + * interrupts together, with break detection always enabled. + */ + return; + } + + scsptr = serial_port_in(port, SCSPTR); + scscr = serial_port_in(port, SCSCR); + + if (break_state == -1) { + scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT; + scscr &= ~SCSCR_TE; + } else { + scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO; + scscr |= SCSCR_TE; + } + + serial_port_out(port, SCSPTR, scsptr); + serial_port_out(port, SCSCR, scscr); } #ifdef CONFIG_SERIAL_SH_SCI_DMA |