summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/sunsab.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/sunsab.c')
-rw-r--r--drivers/tty/serial/sunsab.c1152
1 files changed, 1152 insertions, 0 deletions
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
new file mode 100644
index 00000000000..5b246b18f42
--- /dev/null
+++ b/drivers/tty/serial/sunsab.c
@@ -0,0 +1,1152 @@
+/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
+ *
+ * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
+ * Maxim Krasnyanskiy <maxk@qualcomm.com>
+ *
+ * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
+ * rates to be programmed into the UART. Also eliminated a lot of
+ * duplicated code in the console setup.
+ * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
+ *
+ * Ported to new 2.5.x UART layer.
+ * David S. Miller <davem@davemloft.net>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+
+#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "suncore.h"
+#include "sunsab.h"
+
+struct uart_sunsab_port {
+ struct uart_port port; /* Generic UART port */
+ union sab82532_async_regs __iomem *regs; /* Chip registers */
+ unsigned long irqflags; /* IRQ state flags */
+ int dsr; /* Current DSR state */
+ unsigned int cec_timeout; /* Chip poll timeout... */
+ unsigned int tec_timeout; /* likewise */
+ unsigned char interrupt_mask0;/* ISR0 masking */
+ unsigned char interrupt_mask1;/* ISR1 masking */
+ unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
+ unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
+ unsigned int gis_shift;
+ int type; /* SAB82532 version */
+
+ /* Setting configuration bits while the transmitter is active
+ * can cause garbage characters to get emitted by the chip.
+ * Therefore, we cache such writes here and do the real register
+ * write the next time the transmitter becomes idle.
+ */
+ unsigned int cached_ebrg;
+ unsigned char cached_mode;
+ unsigned char cached_pvr;
+ unsigned char cached_dafo;
+};
+
+/*
+ * This assumes you have a 29.4912 MHz clock for your UART.
+ */
+#define SAB_BASE_BAUD ( 29491200 / 16 )
+
+static char *sab82532_version[16] = {
+ "V1.0", "V2.0", "V3.2", "V(0x03)",
+ "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
+ "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
+ "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
+};
+
+#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
+#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */
+
+#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */
+#define SAB82532_XMIT_FIFO_SIZE 32
+
+static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
+{
+ int timeout = up->tec_timeout;
+
+ while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
+ udelay(1);
+}
+
+static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
+{
+ int timeout = up->cec_timeout;
+
+ while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
+ udelay(1);
+}
+
+static struct tty_struct *
+receive_chars(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat)
+{
+ struct tty_struct *tty = NULL;
+ unsigned char buf[32];
+ int saw_console_brk = 0;
+ int free_fifo = 0;
+ int count = 0;
+ int i;
+
+ if (up->port.state != NULL) /* Unopened serial console */
+ tty = up->port.state->port.tty;
+
+ /* Read number of BYTES (Character + Status) available. */
+ if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
+ count = SAB82532_RECV_FIFO_SIZE;
+ free_fifo++;
+ }
+
+ if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
+ count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
+ free_fifo++;
+ }
+
+ /* Issue a FIFO read command in case we where idle. */
+ if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
+ return tty;
+ }
+
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ free_fifo++;
+
+ /* Read the FIFO. */
+ for (i = 0; i < count; i++)
+ buf[i] = readb(&up->regs->r.rfifo[i]);
+
+ /* Issue Receive Message Complete command. */
+ if (free_fifo) {
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
+ }
+
+ /* Count may be zero for BRK, so we check for it here */
+ if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
+ (up->port.line == up->port.cons->index))
+ saw_console_brk = 1;
+
+ for (i = 0; i < count; i++) {
+ unsigned char ch = buf[i], flag;
+
+ if (tty == NULL) {
+ uart_handle_sysrq_char(&up->port, ch);
+ continue;
+ }
+
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR |
+ SAB82532_ISR0_RFO)) ||
+ unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
+ /*
+ * For statistics only
+ */
+ if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
+ stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ continue;
+ } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
+ up->port.icount.parity++;
+ else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
+ up->port.icount.frame++;
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
+ stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
+ flag = TTY_BREAK;
+ } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
+ flag = TTY_PARITY;
+ else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ continue;
+
+ if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
+ (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
+ if (saw_console_brk)
+ sun_do_break();
+
+ return tty;
+}
+
+static void sunsab_stop_tx(struct uart_port *);
+static void sunsab_tx_idle(struct uart_sunsab_port *);
+
+static void transmit_chars(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int i;
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
+ up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ set_bit(SAB82532_ALLS, &up->irqflags);
+ }
+
+#if 0 /* bde@nwlink.com says this check causes problems */
+ if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
+ return;
+#endif
+
+ if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
+ return;
+
+ set_bit(SAB82532_XPR, &up->irqflags);
+ sunsab_tx_idle(up);
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ up->interrupt_mask1 |= SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ return;
+ }
+
+ up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ clear_bit(SAB82532_ALLS, &up->irqflags);
+
+ /* Stuff 32 bytes into Transmit FIFO. */
+ clear_bit(SAB82532_XPR, &up->irqflags);
+ for (i = 0; i < up->port.fifosize; i++) {
+ writeb(xmit->buf[xmit->tail],
+ &up->regs->w.xfifo[i]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Issue a Transmit Frame command. */
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ sunsab_stop_tx(&up->port);
+}
+
+static void check_status(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat)
+{
+ if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
+ uart_handle_dcd_change(&up->port,
+ !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
+ uart_handle_cts_change(&up->port,
+ (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
+
+ if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
+ up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
+ up->port.icount.dsr++;
+ }
+
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+}
+
+static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
+{
+ struct uart_sunsab_port *up = dev_id;
+ struct tty_struct *tty;
+ union sab82532_irq_status status;
+ unsigned long flags;
+ unsigned char gis;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ status.stat = 0;
+ gis = readb(&up->regs->r.gis) >> up->gis_shift;
+ if (gis & 1)
+ status.sreg.isr0 = readb(&up->regs->r.isr0);
+ if (gis & 2)
+ status.sreg.isr1 = readb(&up->regs->r.isr1);
+
+ tty = NULL;
+ if (status.stat) {
+ if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
+ (status.sreg.isr1 & SAB82532_ISR1_BRK))
+ tty = receive_chars(up, &status);
+ if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
+ (status.sreg.isr1 & SAB82532_ISR1_CSC))
+ check_status(up, &status);
+ if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
+ transmit_chars(up, &status);
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+/* port->lock is not held. */
+static unsigned int sunsab_tx_empty(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ int ret;
+
+ /* Do not need a lock for a state test like this. */
+ if (test_bit(SAB82532_ALLS, &up->irqflags))
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/* port->lock held by caller. */
+static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ if (mctrl & TIOCM_RTS) {
+ up->cached_mode &= ~SAB82532_MODE_FRTS;
+ up->cached_mode |= SAB82532_MODE_RTS;
+ } else {
+ up->cached_mode |= (SAB82532_MODE_FRTS |
+ SAB82532_MODE_RTS);
+ }
+ if (mctrl & TIOCM_DTR) {
+ up->cached_pvr &= ~(up->pvr_dtr_bit);
+ } else {
+ up->cached_pvr |= up->pvr_dtr_bit;
+ }
+
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
+}
+
+/* port->lock is held by caller and interrupts are disabled. */
+static unsigned int sunsab_get_mctrl(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned char val;
+ unsigned int result;
+
+ result = 0;
+
+ val = readb(&up->regs->r.pvr);
+ result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
+
+ val = readb(&up->regs->r.vstr);
+ result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
+
+ val = readb(&up->regs->r.star);
+ result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
+
+ return result;
+}
+
+/* port->lock held by caller. */
+static void sunsab_stop_tx(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ up->interrupt_mask1 |= SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+}
+
+/* port->lock held by caller. */
+static void sunsab_tx_idle(struct uart_sunsab_port *up)
+{
+ if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
+ u8 tmp;
+
+ clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ writeb(up->cached_mode, &up->regs->rw.mode);
+ writeb(up->cached_pvr, &up->regs->rw.pvr);
+ writeb(up->cached_dafo, &up->regs->w.dafo);
+
+ writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
+ tmp = readb(&up->regs->rw.ccr2);
+ tmp &= ~0xc0;
+ tmp |= (up->cached_ebrg >> 2) & 0xc0;
+ writeb(tmp, &up->regs->rw.ccr2);
+ }
+}
+
+/* port->lock held by caller. */
+static void sunsab_start_tx(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int i;
+
+ up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ if (!test_bit(SAB82532_XPR, &up->irqflags))
+ return;
+
+ clear_bit(SAB82532_ALLS, &up->irqflags);
+ clear_bit(SAB82532_XPR, &up->irqflags);
+
+ for (i = 0; i < up->port.fifosize; i++) {
+ writeb(xmit->buf[xmit->tail],
+ &up->regs->w.xfifo[i]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Issue a Transmit Frame command. */
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
+}
+
+/* port->lock is not held. */
+static void sunsab_send_xchar(struct uart_port *port, char ch)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sunsab_tec_wait(up);
+ writeb(ch, &up->regs->w.tic);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/* port->lock held by caller. */
+static void sunsab_stop_rx(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ up->interrupt_mask0 |= SAB82532_IMR0_TCD;
+ writeb(up->interrupt_mask1, &up->regs->w.imr0);
+}
+
+/* port->lock held by caller. */
+static void sunsab_enable_ms(struct uart_port *port)
+{
+ /* For now we always receive these interrupts. */
+}
+
+/* port->lock is not held. */
+static void sunsab_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char val;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ val = up->cached_dafo;
+ if (break_state)
+ val |= SAB82532_DAFO_XBRK;
+ else
+ val &= ~SAB82532_DAFO_XBRK;
+ up->cached_dafo = val;
+
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/* port->lock is not held. */
+static int sunsab_startup(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char tmp;
+ int err = request_irq(up->port.irq, sunsab_interrupt,
+ IRQF_SHARED, "sab", up);
+ if (err)
+ return err;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Wait for any commands or immediate characters
+ */
+ sunsab_cec_wait(up);
+ sunsab_tec_wait(up);
+
+ /*
+ * Clear the FIFO buffers.
+ */
+ writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) readb(&up->regs->r.isr0);
+ (void) readb(&up->regs->r.isr1);
+
+ /*
+ * Now, initialize the UART
+ */
+ writeb(0, &up->regs->w.ccr0); /* power-down */
+ writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
+ SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
+ writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
+ writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
+ SAB82532_CCR2_TOE, &up->regs->w.ccr2);
+ writeb(0, &up->regs->w.ccr3);
+ writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
+ up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
+ SAB82532_MODE_RAC);
+ writeb(up->cached_mode, &up->regs->w.mode);
+ writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
+
+ tmp = readb(&up->regs->rw.ccr0);
+ tmp |= SAB82532_CCR0_PU; /* power-up */
+ writeb(tmp, &up->regs->rw.ccr0);
+
+ /*
+ * Finally, enable interrupts
+ */
+ up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
+ SAB82532_IMR0_PLLA);
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
+ SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
+ SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
+ SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ set_bit(SAB82532_ALLS, &up->irqflags);
+ set_bit(SAB82532_XPR, &up->irqflags);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+/* port->lock is not held. */
+static void sunsab_shutdown(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Disable Interrupts */
+ up->interrupt_mask0 = 0xff;
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = 0xff;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ /* Disable break condition */
+ up->cached_dafo = readb(&up->regs->rw.dafo);
+ up->cached_dafo &= ~SAB82532_DAFO_XBRK;
+ writeb(up->cached_dafo, &up->regs->rw.dafo);
+
+ /* Disable Receiver */
+ up->cached_mode &= ~SAB82532_MODE_RAC;
+ writeb(up->cached_mode, &up->regs->rw.mode);
+
+ /*
+ * XXX FIXME
+ *
+ * If the chip is powered down here the system hangs/crashes during
+ * reboot or shutdown. This needs to be investigated further,
+ * similar behaviour occurs in 2.4 when the driver is configured
+ * as a module only. One hint may be that data is sometimes
+ * transmitted at 9600 baud during shutdown (regardless of the
+ * speed the chip was configured for when the port was open).
+ */
+#if 0
+ /* Power Down */
+ tmp = readb(&up->regs->rw.ccr0);
+ tmp &= ~SAB82532_CCR0_PU;
+ writeb(tmp, &up->regs->rw.ccr0);
+#endif
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ free_irq(up->port.irq, up);
+}
+
+/*
+ * This is used to figure out the divisor speeds.
+ *
+ * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
+ *
+ * with 0 <= N < 64 and 0 <= M < 16
+ */
+
+static void calc_ebrg(int baud, int *n_ret, int *m_ret)
+{
+ int n, m;
+
+ if (baud == 0) {
+ *n_ret = 0;
+ *m_ret = 0;
+ return;
+ }
+
+ /*
+ * We scale numbers by 10 so that we get better accuracy
+ * without having to use floating point. Here we increment m
+ * until n is within the valid range.
+ */
+ n = (SAB_BASE_BAUD * 10) / baud;
+ m = 0;
+ while (n >= 640) {
+ n = n / 2;
+ m++;
+ }
+ n = (n+5) / 10;
+ /*
+ * We try very hard to avoid speeds with M == 0 since they may
+ * not work correctly for XTAL frequences above 10 MHz.
+ */
+ if ((m == 0) && ((n & 1) == 0)) {
+ n = n / 2;
+ m++;
+ }
+ *n_ret = n - 1;
+ *m_ret = m;
+}
+
+/* Internal routine, port->lock is held and local interrupts are disabled. */
+static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
+ unsigned int iflag, unsigned int baud,
+ unsigned int quot)
+{
+ unsigned char dafo;
+ int bits, n, m;
+
+ /* Byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
+ case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
+ case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
+ case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
+ }
+
+ if (cflag & CSTOPB) {
+ dafo |= SAB82532_DAFO_STOP;
+ bits++;
+ }
+
+ if (cflag & PARENB) {
+ dafo |= SAB82532_DAFO_PARE;
+ bits++;
+ }
+
+ if (cflag & PARODD) {
+ dafo |= SAB82532_DAFO_PAR_ODD;
+ } else {
+ dafo |= SAB82532_DAFO_PAR_EVEN;
+ }
+ up->cached_dafo = dafo;
+
+ calc_ebrg(baud, &n, &m);
+
+ up->cached_ebrg = n | (m << 6);
+
+ up->tec_timeout = (10 * 1000000) / baud;
+ up->cec_timeout = up->tec_timeout >> 2;
+
+ /* CTS flow control flags */
+ /* We encode read_status_mask and ignore_status_mask like so:
+ *
+ * ---------------------
+ * | ... | ISR1 | ISR0 |
+ * ---------------------
+ * .. 15 8 7 0
+ */
+
+ up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
+ SAB82532_ISR0_CDSC);
+ up->port.read_status_mask |= (SAB82532_ISR1_CSC |
+ SAB82532_ISR1_ALLS |
+ SAB82532_ISR1_XPR) << 8;
+ if (iflag & INPCK)
+ up->port.read_status_mask |= (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ if (iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ if (iflag & IGNBRK) {
+ up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
+ SAB82532_ISR0_TCD);
+
+ uart_update_timeout(&up->port, cflag,
+ (up->port.uartclk / (16 * quot)));
+
+ /* Now schedule a register update when the chip's
+ * transmitter is idle.
+ */
+ up->cached_mode |= SAB82532_MODE_RAC;
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
+}
+
+/* port->lock is not held. */
+static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+ unsigned int quot = uart_get_divisor(port, baud);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *sunsab_type(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (void *)port;
+ static char buf[36];
+
+ sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
+ return buf;
+}
+
+static void sunsab_release_port(struct uart_port *port)
+{
+}
+
+static int sunsab_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void sunsab_config_port(struct uart_port *port, int flags)
+{
+}
+
+static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops sunsab_pops = {
+ .tx_empty = sunsab_tx_empty,
+ .set_mctrl = sunsab_set_mctrl,
+ .get_mctrl = sunsab_get_mctrl,
+ .stop_tx = sunsab_stop_tx,
+ .start_tx = sunsab_start_tx,
+ .send_xchar = sunsab_send_xchar,
+ .stop_rx = sunsab_stop_rx,
+ .enable_ms = sunsab_enable_ms,
+ .break_ctl = sunsab_break_ctl,
+ .startup = sunsab_startup,
+ .shutdown = sunsab_shutdown,
+ .set_termios = sunsab_set_termios,
+ .type = sunsab_type,
+ .release_port = sunsab_release_port,
+ .request_port = sunsab_request_port,
+ .config_port = sunsab_config_port,
+ .verify_port = sunsab_verify_port,
+};
+
+static struct uart_driver sunsab_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "sunsab",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+};
+
+static struct uart_sunsab_port *sunsab_ports;
+
+#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
+
+static void sunsab_console_putchar(struct uart_port *port, int c)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *)port;
+
+ sunsab_tec_wait(up);
+ writeb(c, &up->regs->w.tic);
+}
+
+static void sunsab_console_write(struct console *con, const char *s, unsigned n)
+{
+ struct uart_sunsab_port *up = &sunsab_ports[con->index];
+ unsigned long flags;
+ int locked = 1;
+
+ local_irq_save(flags);
+ if (up->port.sysrq) {
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
+ } else
+ spin_lock(&up->port.lock);
+
+ uart_console_write(&up->port, s, n, sunsab_console_putchar);
+ sunsab_tec_wait(up);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
+}
+
+static int sunsab_console_setup(struct console *con, char *options)
+{
+ struct uart_sunsab_port *up = &sunsab_ports[con->index];
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /*
+ * The console framework calls us for each and every port
+ * registered. Defer the console setup until the requested
+ * port has been properly discovered. A bit of a hack,
+ * though...
+ */
+ if (up->port.type != PORT_SUNSAB)
+ return -1;
+
+ printk("Console: ttyS%d (SAB82532)\n",
+ (sunsab_reg.minor - 64) + con->index);
+
+ sunserial_console_termios(con, up->port.dev->of_node);
+
+ switch (con->cflag & CBAUD) {
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ default: case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ case B57600: baud = 57600; break;
+ case B115200: baud = 115200; break;
+ case B230400: baud = 230400; break;
+ case B460800: baud = 460800; break;
+ };
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&up->port.lock);
+
+ /*
+ * Initialize the hardware
+ */
+ sunsab_startup(&up->port);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts
+ */
+ up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
+ SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
+ SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
+ SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
+ SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ quot = uart_get_divisor(&up->port, baud);
+ sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
+ sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static struct console sunsab_console = {
+ .name = "ttyS",
+ .write = sunsab_console_write,
+ .device = uart_console_device,
+ .setup = sunsab_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sunsab_reg,
+};
+
+static inline struct console *SUNSAB_CONSOLE(void)
+{
+ return &sunsab_console;
+}
+#else
+#define SUNSAB_CONSOLE() (NULL)
+#define sunsab_console_init() do { } while (0)
+#endif
+
+static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
+ struct platform_device *op,
+ unsigned long offset,
+ int line)
+{
+ up->port.line = line;
+ up->port.dev = &op->dev;
+
+ up->port.mapbase = op->resource[0].start + offset;
+ up->port.membase = of_ioremap(&op->resource[0], offset,
+ sizeof(union sab82532_async_regs),
+ "sab");
+ if (!up->port.membase)
+ return -ENOMEM;
+ up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
+
+ up->port.irq = op->archdata.irqs[0];
+
+ up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
+ up->port.iotype = UPIO_MEM;
+
+ writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
+
+ up->port.ops = &sunsab_pops;
+ up->port.type = PORT_SUNSAB;
+ up->port.uartclk = SAB_BASE_BAUD;
+
+ up->type = readb(&up->regs->r.vstr) & 0x0f;
+ writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
+ writeb(0xff, &up->regs->w.pim);
+ if ((up->port.line & 0x1) == 0) {
+ up->pvr_dsr_bit = (1 << 0);
+ up->pvr_dtr_bit = (1 << 1);
+ up->gis_shift = 2;
+ } else {
+ up->pvr_dsr_bit = (1 << 3);
+ up->pvr_dtr_bit = (1 << 2);
+ up->gis_shift = 0;
+ }
+ up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
+ writeb(up->cached_pvr, &up->regs->w.pvr);
+ up->cached_mode = readb(&up->regs->rw.mode);
+ up->cached_mode |= SAB82532_MODE_FRTS;
+ writeb(up->cached_mode, &up->regs->rw.mode);
+ up->cached_mode |= SAB82532_MODE_RTS;
+ writeb(up->cached_mode, &up->regs->rw.mode);
+
+ up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
+ up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
+
+ return 0;
+}
+
+static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match)
+{
+ static int inst;
+ struct uart_sunsab_port *up;
+ int err;
+
+ up = &sunsab_ports[inst * 2];
+
+ err = sunsab_init_one(&up[0], op,
+ 0,
+ (inst * 2) + 0);
+ if (err)
+ goto out;
+
+ err = sunsab_init_one(&up[1], op,
+ sizeof(union sab82532_async_regs),
+ (inst * 2) + 1);
+ if (err)
+ goto out1;
+
+ sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
+ &sunsab_reg, up[0].port.line,
+ false);
+
+ sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
+ &sunsab_reg, up[1].port.line,
+ false);
+
+ err = uart_add_one_port(&sunsab_reg, &up[0].port);
+ if (err)
+ goto out2;
+
+ err = uart_add_one_port(&sunsab_reg, &up[1].port);
+ if (err)
+ goto out3;
+
+ dev_set_drvdata(&op->dev, &up[0]);
+
+ inst++;
+
+ return 0;
+
+out3:
+ uart_remove_one_port(&sunsab_reg, &up[0].port);
+out2:
+ of_iounmap(&op->resource[0],
+ up[1].port.membase,
+ sizeof(union sab82532_async_regs));
+out1:
+ of_iounmap(&op->resource[0],
+ up[0].port.membase,
+ sizeof(union sab82532_async_regs));
+out:
+ return err;
+}
+
+static int __devexit sab_remove(struct platform_device *op)
+{
+ struct uart_sunsab_port *up = dev_get_drvdata(&op->dev);
+
+ uart_remove_one_port(&sunsab_reg, &up[1].port);
+ uart_remove_one_port(&sunsab_reg, &up[0].port);
+ of_iounmap(&op->resource[0],
+ up[1].port.membase,
+ sizeof(union sab82532_async_regs));
+ of_iounmap(&op->resource[0],
+ up[0].port.membase,
+ sizeof(union sab82532_async_regs));
+
+ dev_set_drvdata(&op->dev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id sab_match[] = {
+ {
+ .name = "se",
+ },
+ {
+ .name = "serial",
+ .compatible = "sab82532",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sab_match);
+
+static struct of_platform_driver sab_driver = {
+ .driver = {
+ .name = "sab",
+ .owner = THIS_MODULE,
+ .of_match_table = sab_match,
+ },
+ .probe = sab_probe,
+ .remove = __devexit_p(sab_remove),
+};
+
+static int __init sunsab_init(void)
+{
+ struct device_node *dp;
+ int err;
+ int num_channels = 0;
+
+ for_each_node_by_name(dp, "se")
+ num_channels += 2;
+ for_each_node_by_name(dp, "serial") {
+ if (of_device_is_compatible(dp, "sab82532"))
+ num_channels += 2;
+ }
+
+ if (num_channels) {
+ sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) *
+ num_channels, GFP_KERNEL);
+ if (!sunsab_ports)
+ return -ENOMEM;
+
+ err = sunserial_register_minors(&sunsab_reg, num_channels);
+ if (err) {
+ kfree(sunsab_ports);
+ sunsab_ports = NULL;
+
+ return err;
+ }
+ }
+
+ return of_register_platform_driver(&sab_driver);
+}
+
+static void __exit sunsab_exit(void)
+{
+ of_unregister_platform_driver(&sab_driver);
+ if (sunsab_reg.nr) {
+ sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
+ }
+
+ kfree(sunsab_ports);
+ sunsab_ports = NULL;
+}
+
+module_init(sunsab_init);
+module_exit(sunsab_exit);
+
+MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
+MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
+MODULE_LICENSE("GPL");