summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/68328serial.c29
-rw-r--r--drivers/tty/serial/68360serial.c1
-rw-r--r--drivers/tty/serial/8250.c3
-rw-r--r--drivers/tty/serial/Kconfig1
-rw-r--r--drivers/tty/serial/bfin_5xx.c15
-rw-r--r--drivers/tty/serial/max3100.c2
-rw-r--r--drivers/tty/serial/max3107.c2
-rw-r--r--drivers/tty/serial/sb1250-duart.c2
-rw-r--r--drivers/tty/serial/serial_cs.c1
9 files changed, 28 insertions, 28 deletions
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index be0ebce36e5..de0160e3f8c 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -262,7 +262,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status)
static void receive_chars(struct m68k_serial *info, unsigned short rx)
{
- struct tty_struct *tty = info->port.tty;
+ struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
unsigned char ch, flag;
@@ -329,7 +329,7 @@ static void transmit_chars(struct m68k_serial *info)
goto clear_and_return;
}
- if((info->xmit_cnt <= 0) || info->port.tty->stopped) {
+ if((info->xmit_cnt <= 0) || info->tty->stopped) {
/* That's peculiar... TX ints off */
uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
goto clear_and_return;
@@ -383,7 +383,7 @@ static void do_softint(struct work_struct *work)
struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue);
struct tty_struct *tty;
- tty = info->port.tty;
+ tty = info->tty;
if (!tty)
return;
#if 0
@@ -407,7 +407,7 @@ static void do_serial_hangup(struct work_struct *work)
struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup);
struct tty_struct *tty;
- tty = info->port.tty;
+ tty = info->tty;
if (!tty)
return;
@@ -451,8 +451,8 @@ static int startup(struct m68k_serial * info)
uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
#endif
- if (info->port.tty)
- clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
@@ -486,8 +486,8 @@ static void shutdown(struct m68k_serial * info)
info->xmit_buf = 0;
}
- if (info->port.tty)
- set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~S_INITIALIZED;
local_irq_restore(flags);
@@ -553,9 +553,9 @@ static void change_speed(struct m68k_serial *info)
unsigned cflag;
int i;
- if (!info->port.tty || !info->port.tty->termios)
+ if (!info->tty || !info->tty->termios)
return;
- cflag = info->port.tty->termios->c_cflag;
+ cflag = info->tty->termios->c_cflag;
if (!(port = info->port))
return;
@@ -970,7 +970,6 @@ static void send_break(struct m68k_serial * info, unsigned int duration)
static int rs_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
- int error;
struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
int retval;
@@ -1104,7 +1103,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
- info->port.tty = NULL;
+ info->tty = NULL;
#warning "This is not and has never been valid so fix it"
#if 0
if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1142,7 +1141,7 @@ void rs_hangup(struct tty_struct *tty)
info->event = 0;
info->count = 0;
info->flags &= ~S_NORMAL_ACTIVE;
- info->port.tty = NULL;
+ info->tty = NULL;
wake_up_interruptible(&info->open_wait);
}
@@ -1261,7 +1260,7 @@ int rs_open(struct tty_struct *tty, struct file * filp)
info->count++;
tty->driver_data = info;
- info->port.tty = tty;
+ info->tty = tty;
/*
* Start up serial port
@@ -1338,7 +1337,7 @@ rs68328_init(void)
info = &m68k_soft[i];
info->magic = SERIAL_MAGIC;
info->port = (int) &uart_addr[i];
- info->port.tty = NULL;
+ info->tty = NULL;
info->irq = uart_irqs[i];
info->custom_divisor = 16;
info->close_delay = 50;
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index 88b13356ec1..bc21eeae8fd 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -2428,6 +2428,7 @@ static const struct tty_operations rs_360_ops = {
/* .read_proc = rs_360_read_proc, */
.tiocmget = rs_360_tiocmget,
.tiocmset = rs_360_tiocmset,
+ .get_icount = rs_360_get_icount,
};
static int __init rs_360_init(void)
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b25e6e49053..3975df6f7fd 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -236,7 +236,8 @@ static const struct serial8250_config uart_config[] = {
.fifo_size = 128,
.tx_loadsz = 128,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ /* UART_CAP_EFR breaks billionon CF bluetooth card. */
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
},
[PORT_16654] = {
.name = "ST16654",
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b1682d7f1d8..2b8334601c8 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1518,6 +1518,7 @@ config SERIAL_BCM63XX_CONSOLE
config SERIAL_GRLIB_GAISLER_APBUART
tristate "GRLIB APBUART serial support"
depends on OF
+ select SERIAL_CORE
---help---
Add support for the GRLIB APBUART serial port.
diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_5xx.c
index e381b895b04..9b1ff2b6bb3 100644
--- a/drivers/tty/serial/bfin_5xx.c
+++ b/drivers/tty/serial/bfin_5xx.c
@@ -370,10 +370,8 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
- spin_lock(&uart->port.lock);
while (UART_GET_LSR(uart) & DR)
bfin_serial_rx_chars(uart);
- spin_unlock(&uart->port.lock);
return IRQ_HANDLED;
}
@@ -490,9 +488,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
{
int x_pos, pos;
- dma_disable_irq(uart->tx_dma_channel);
- dma_disable_irq(uart->rx_dma_channel);
- spin_lock_bh(&uart->port.lock);
+ dma_disable_irq_nosync(uart->rx_dma_channel);
+ spin_lock_bh(&uart->rx_lock);
/* 2D DMA RX buffer ring is used. Because curr_y_count and
* curr_x_count can't be read as an atomic operation,
@@ -523,8 +520,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- spin_unlock_bh(&uart->port.lock);
- dma_enable_irq(uart->tx_dma_channel);
+ spin_unlock_bh(&uart->rx_lock);
dma_enable_irq(uart->rx_dma_channel);
mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
@@ -571,7 +567,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
unsigned short irqstat;
int x_pos, pos;
- spin_lock(&uart->port.lock);
+ spin_lock(&uart->rx_lock);
irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
clear_dma_irqstat(uart->rx_dma_channel);
@@ -589,7 +585,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- spin_unlock(&uart->port.lock);
+ spin_unlock(&uart->rx_lock);
return IRQ_HANDLED;
}
@@ -1332,6 +1328,7 @@ static int bfin_serial_probe(struct platform_device *pdev)
}
#ifdef CONFIG_SERIAL_BFIN_DMA
+ spin_lock_init(&uart->rx_lock);
uart->tx_done = 1;
uart->tx_count = 0;
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index beb1afa27d8..7b951adac54 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -601,7 +601,7 @@ static int max3100_startup(struct uart_port *port)
s->rts = 0;
sprintf(b, "max3100-%d", s->minor);
- s->workqueue = create_freezeable_workqueue(b);
+ s->workqueue = create_freezable_workqueue(b);
if (!s->workqueue) {
dev_warn(&s->spi->dev, "cannot create workqueue\n");
return -EBUSY;
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 910870edf70..750b4f62731 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -833,7 +833,7 @@ static int max3107_startup(struct uart_port *port)
struct max3107_port *s = container_of(port, struct max3107_port, port);
/* Initialize work queue */
- s->workqueue = create_freezeable_workqueue("max3107");
+ s->workqueue = create_freezable_workqueue("max3107");
if (!s->workqueue) {
dev_err(&s->spi->dev, "Workqueue creation failed\n");
return -EBUSY;
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index a2f2b325449..602d9845c52 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -829,7 +829,7 @@ static void __init sbd_probe_duarts(void)
#ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE
/*
* Serial console stuff. Very basic, polling driver for doing serial
- * console output. The console_sem is held by the caller, so we
+ * console output. The console_lock is held by the caller, so we
* shouldn't be interrupted for more console activity.
*/
static void sbd_console_putchar(struct uart_port *uport, int ch)
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c
index 93760b2ea17..1ef4df9bf7e 100644
--- a/drivers/tty/serial/serial_cs.c
+++ b/drivers/tty/serial/serial_cs.c
@@ -712,6 +712,7 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-09 02:36:01 +0000