diff options
Diffstat (limited to 'drivers/tty/synclink.c')
-rw-r--r-- | drivers/tty/synclink.c | 86 |
1 files changed, 47 insertions, 39 deletions
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 593d40ad0a6..70e3a525bc8 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -1359,7 +1359,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info ) } } - if ( (info->port.flags & ASYNC_CTS_FLOW) && + if (tty_port_cts_enabled(&info->port) && (status & MISCSTATUS_CTS_LATCHED) ) { if (info->port.tty->hw_stopped) { if (status & MISCSTATUS_CTS) { @@ -1840,22 +1840,22 @@ static void shutdown(struct mgsl_struct * info) usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS + TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC ); usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); - + /* Disable DMAEN (Port 7, Bit 14) */ /* This disconnects the DMA request signal from the ISA bus */ /* on the ISA adapter. This has no effect for the PCI adapter */ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14)); - + /* Disable INTEN (Port 6, Bit12) */ /* This disconnects the IRQ request signal to the ISA bus */ /* on the ISA adapter. This has no effect for the PCI adapter */ usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12)); - - if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) { + + if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); usc_set_serial_signals(info); } - + spin_unlock_irqrestore(&info->irq_spinlock,flags); mgsl_release_resources(info); @@ -1895,7 +1895,7 @@ static void mgsl_program_hw(struct mgsl_struct *info) usc_EnableInterrupts(info, IO_PIN); usc_get_serial_signals(info); - if (info->netcount || info->port.tty->termios->c_cflag & CREAD) + if (info->netcount || info->port.tty->termios.c_cflag & CREAD) usc_start_receiver(info); spin_unlock_irqrestore(&info->irq_spinlock,flags); @@ -1908,14 +1908,14 @@ static void mgsl_change_params(struct mgsl_struct *info) unsigned cflag; int bits_per_char; - if (!info->port.tty || !info->port.tty->termios) + if (!info->port.tty) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_change_params(%s)\n", __FILE__,__LINE__, info->device_name ); - cflag = info->port.tty->termios->c_cflag; + cflag = info->port.tty->termios.c_cflag; /* if B0 rate (hangup) specified then negate DTR and RTS */ /* otherwise assert DTR and RTS */ @@ -2367,8 +2367,8 @@ static void mgsl_throttle(struct tty_struct * tty) if (I_IXOFF(tty)) mgsl_send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) { + + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->irq_spinlock,flags); info->serial_signals &= ~SerialSignal_RTS; usc_set_serial_signals(info); @@ -2401,8 +2401,8 @@ static void mgsl_unthrottle(struct tty_struct * tty) else mgsl_send_xchar(tty, START_CHAR(tty)); } - - if (tty->termios->c_cflag & CRTSCTS) { + + if (tty->termios.c_cflag & CRTSCTS) { spin_lock_irqsave(&info->irq_spinlock,flags); info->serial_signals |= SerialSignal_RTS; usc_set_serial_signals(info); @@ -3045,7 +3045,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio /* Handle transition to B0 status */ if (old_termios->c_cflag & CBAUD && - !(tty->termios->c_cflag & CBAUD)) { + !(tty->termios.c_cflag & CBAUD)) { info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); spin_lock_irqsave(&info->irq_spinlock,flags); usc_set_serial_signals(info); @@ -3054,9 +3054,9 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && - tty->termios->c_cflag & CBAUD) { + tty->termios.c_cflag & CBAUD) { info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios->c_cflag & CRTSCTS) || + if (!(tty->termios.c_cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) { info->serial_signals |= SerialSignal_RTS; } @@ -3067,7 +3067,7 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio /* Handle turning off CRTSCTS */ if (old_termios->c_cflag & CRTSCTS && - !(tty->termios->c_cflag & CRTSCTS)) { + !(tty->termios.c_cflag & CRTSCTS)) { tty->hw_stopped = 0; mgsl_start(tty); } @@ -3287,7 +3287,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, return 0; } - if (tty->termios->c_cflag & CLOCAL) + if (tty->termios.c_cflag & CLOCAL) do_clocal = true; /* Wait for carrier detect and the line to become @@ -3313,7 +3313,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, port->blocked_open++; while (1) { - if (tty->termios->c_cflag & CBAUD) + if (tty->termios.c_cflag & CBAUD) tty_port_raise_dtr_rts(port); set_current_state(TASK_INTERRUPTIBLE); @@ -3338,9 +3338,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("%s(%d):block_til_ready blocking on %s count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); - tty_unlock(); + tty_unlock(tty); schedule(); - tty_lock(); + tty_lock(tty); } set_current_state(TASK_RUNNING); @@ -3362,6 +3362,29 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, } /* end of block_til_ready() */ +static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct mgsl_struct *info; + int line = tty->index; + + /* verify range of specified line number */ + if (line >= mgsl_device_count) { + printk("%s(%d):mgsl_open with invalid line #%d.\n", + __FILE__, __LINE__, line); + return -ENODEV; + } + + /* find the info structure for the specified line */ + info = mgsl_device_list; + while (info && info->line != line) + info = info->next_device; + if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) + return -ENODEV; + tty->driver_data = info; + + return tty_port_install(&info->port, driver, tty); +} + /* mgsl_open() * * Called when a port is opened. Init and enable port. @@ -3374,26 +3397,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, */ static int mgsl_open(struct tty_struct *tty, struct file * filp) { - struct mgsl_struct *info; - int retval, line; + struct mgsl_struct *info = tty->driver_data; unsigned long flags; + int retval; - /* verify range of specified line number */ - line = tty->index; - if (line >= mgsl_device_count) { - printk("%s(%d):mgsl_open with invalid line #%d.\n", - __FILE__,__LINE__,line); - return -ENODEV; - } - - /* find the info structure for the specified line */ - info = mgsl_device_list; - while(info && info->line != line) - info = info->next_device; - if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) - return -ENODEV; - - tty->driver_data = info; info->port.tty = tty; if (debug_level >= DEBUG_LEVEL_INFO) @@ -4297,6 +4304,7 @@ static struct mgsl_struct* mgsl_allocate_device(void) } /* end of mgsl_allocate_device()*/ static const struct tty_operations mgsl_ops = { + .install = mgsl_install, .open = mgsl_open, .close = mgsl_close, .write = mgsl_write, |