diff options
Diffstat (limited to 'drivers/tty/tty_port.c')
-rw-r--r-- | drivers/tty/tty_port.c | 111 |
1 files changed, 80 insertions, 31 deletions
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index b7ff59d3db8..121aeb9393e 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -132,6 +132,7 @@ EXPORT_SYMBOL(tty_port_free_xmit_buf); */ void tty_port_destroy(struct tty_port *port) { + cancel_work_sync(&port->buf.work); tty_buffer_free_all(port); } EXPORT_SYMBOL(tty_port_destroy); @@ -196,12 +197,24 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty) } EXPORT_SYMBOL(tty_port_tty_set); -static void tty_port_shutdown(struct tty_port *port) +static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty) { mutex_lock(&port->mutex); - if (port->ops->shutdown && !port->console && - test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) + if (port->console) + goto out; + + if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) { + /* + * Drop DTR/RTS if HUPCL is set. This causes any attached + * modem to hang up the line. + */ + if (tty && C_HUPCL(tty)) + tty_port_lower_dtr_rts(port); + + if (port->ops->shutdown) port->ops->shutdown(port); + } +out: mutex_unlock(&port->mutex); } @@ -215,24 +228,58 @@ static void tty_port_shutdown(struct tty_port *port) void tty_port_hangup(struct tty_port *port) { + struct tty_struct *tty; unsigned long flags; spin_lock_irqsave(&port->lock, flags); port->count = 0; port->flags &= ~ASYNC_NORMAL_ACTIVE; - if (port->tty) { - set_bit(TTY_IO_ERROR, &port->tty->flags); - tty_kref_put(port->tty); - } + tty = port->tty; + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); port->tty = NULL; spin_unlock_irqrestore(&port->lock, flags); + tty_port_shutdown(port, tty); + tty_kref_put(tty); wake_up_interruptible(&port->open_wait); wake_up_interruptible(&port->delta_msr_wait); - tty_port_shutdown(port); } EXPORT_SYMBOL(tty_port_hangup); /** + * tty_port_tty_hangup - helper to hang up a tty + * + * @port: tty port + * @check_clocal: hang only ttys with CLOCAL unset? + */ +void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) +{ + struct tty_struct *tty = tty_port_tty_get(port); + + if (tty && (!check_clocal || !C_CLOCAL(tty))) { + tty_hangup(tty); + tty_kref_put(tty); + } +} +EXPORT_SYMBOL_GPL(tty_port_tty_hangup); + +/** + * tty_port_tty_wakeup - helper to wake up a tty + * + * @port: tty port + */ +void tty_port_tty_wakeup(struct tty_port *port) +{ + struct tty_struct *tty = tty_port_tty_get(port); + + if (tty) { + tty_wakeup(tty); + tty_kref_put(tty); + } +} +EXPORT_SYMBOL_GPL(tty_port_tty_wakeup); + +/** * tty_port_carrier_raised - carrier raised check * @port: tty port * @@ -350,7 +397,7 @@ int tty_port_block_til_ready(struct tty_port *port, while (1) { /* Indicate we are open */ - if (tty->termios.c_cflag & CBAUD) + if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags)) tty_port_raise_dtr_rts(port); prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); @@ -395,6 +442,20 @@ int tty_port_block_til_ready(struct tty_port *port, } EXPORT_SYMBOL(tty_port_block_til_ready); +static void tty_port_drain_delay(struct tty_port *port, struct tty_struct *tty) +{ + unsigned int bps = tty_get_baud_rate(tty); + long timeout; + + if (bps > 1200) { + timeout = (HZ * 10 * port->drain_delay) / bps; + timeout = max_t(long, timeout, HZ / 10); + } else { + timeout = 2 * HZ; + } + schedule_timeout_interruptible(timeout); +} + int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) { @@ -427,31 +488,19 @@ int tty_port_close_start(struct tty_port *port, set_bit(ASYNCB_CLOSING, &port->flags); tty->closing = 1; spin_unlock_irqrestore(&port->lock, flags); - /* Don't block on a stalled port, just pull the chain */ - if (tty->flow_stopped) - tty_driver_flush_buffer(tty); - if (test_bit(ASYNCB_INITIALIZED, &port->flags) && - port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent_from_close(tty, port->closing_wait); - if (port->drain_delay) { - unsigned int bps = tty_get_baud_rate(tty); - long timeout; - - if (bps > 1200) - timeout = max_t(long, - (HZ * 10 * port->drain_delay) / bps, HZ / 10); - else - timeout = 2 * HZ; - schedule_timeout_interruptible(timeout); + + if (test_bit(ASYNCB_INITIALIZED, &port->flags)) { + /* Don't block on a stalled port, just pull the chain */ + if (tty->flow_stopped) + tty_driver_flush_buffer(tty); + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent_from_close(tty, port->closing_wait); + if (port->drain_delay) + tty_port_drain_delay(port, tty); } /* Flush the ldisc buffering */ tty_ldisc_flush(tty); - /* Drop DTR/RTS if HUPCL is set. This causes any attached modem to - hang up the line */ - if (tty->termios.c_cflag & HUPCL) - tty_port_lower_dtr_rts(port); - /* Don't call port->drop for the last reference. Callers will want to drop the last active reference in ->shutdown() or the tty shutdown path */ @@ -486,7 +535,7 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty, { if (tty_port_close_start(port, tty, filp) == 0) return; - tty_port_shutdown(port); + tty_port_shutdown(port, tty); set_bit(TTY_IO_ERROR, &tty->flags); tty_port_close_end(port, tty); tty_port_tty_set(port, NULL); |