summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/amiserial.c4
-rw-r--r--drivers/tty/serial/8250/8250.c12
-rw-r--r--drivers/tty/serial/8250/8250_pci.c16
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/tty/serial/altera_uart.c4
-rw-r--r--drivers/tty/serial/amba-pl011.c8
-rw-r--r--drivers/tty/serial/atmel_serial.c4
-rw-r--r--drivers/tty/serial/clps711x.c14
-rw-r--r--drivers/tty/serial/mfd.c9
-rw-r--r--drivers/tty/serial/omap-serial.c43
-rw-r--r--drivers/tty/serial/pch_uart.c20
-rw-r--r--drivers/tty/serial/pmac_zilog.c6
-rw-r--r--drivers/tty/serial/samsung.c1
-rw-r--r--drivers/tty/serial/sh-sci.c167
-rw-r--r--drivers/tty/serial/sh-sci.h8
-rw-r--r--drivers/tty/serial/sunzilog.c4
-rw-r--r--drivers/tty/sysrq.c2
-rw-r--r--drivers/tty/vt/keyboard.c26
-rw-r--r--drivers/tty/vt/vt.c3
19 files changed, 177 insertions, 176 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 24145c30c9b..6cc4358f68c 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1073,8 +1073,10 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
(new_serial.close_delay != port->close_delay) ||
(new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->flags & ~ASYNC_USR_MASK))) {
+ tty_unlock();
return -EPERM;
+ }
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
state->custom_divisor = new_serial.custom_divisor;
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 5b149b466ec..5c27f7e6c9f 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -1572,13 +1572,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
do {
struct uart_8250_port *up;
struct uart_port *port;
- bool skip;
up = list_entry(l, struct uart_8250_port, list);
port = &up->port;
- skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
- if (!skip && port->handle_irq(port)) {
+ if (port->handle_irq(port)) {
handled = 1;
end = NULL;
} else if (end == NULL)
@@ -2037,10 +2035,12 @@ static int serial8250_startup(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
/*
- * If the interrupt is not reasserted, setup a timer to
- * kick the UART on a regular basis.
+ * If the interrupt is not reasserted, or we otherwise
+ * don't trust the iir, setup a timer to kick the UART
+ * on a regular basis.
*/
- if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+ if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
+ up->port.flags & UPF_BUG_THRE) {
up->bugs |= UART_BUG_THRE;
pr_debug("ttyS%d - using backup timer\n",
serial_index(port));
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index da2b0b0a183..858dca865d6 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1096,7 +1096,7 @@ static int kt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_port *port, int idx)
{
- port->flags |= UPF_IIR_ONCE;
+ port->flags |= UPF_BUG_THRE;
return skip_tx_en_setup(priv, board, port, idx);
}
@@ -1118,18 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
-static int try_enable_msi(struct pci_dev *dev)
-{
- /* use msi if available, but fallback to legacy otherwise */
- pci_enable_msi(dev);
- return 0;
-}
-
-static void disable_msi(struct pci_dev *dev)
-{
- pci_disable_msi(dev);
-}
-
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
#define PCI_DEVICE_ID_OCTPRO 0x0001
@@ -1249,9 +1237,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .init = try_enable_msi,
.setup = kt_serial_setup,
- .exit = disable_msi,
},
/*
* ITE
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 665beb68f67..070b442c1f8 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1041,7 +1041,7 @@ config SERIAL_OMAP
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
- depends on SERIAL_OMAP
+ depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index e7903751e05..1f0330915d5 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -556,7 +556,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem)
port->mapbase = res_mem->start;
- else if (platp->mapbase)
+ else if (platp)
port->mapbase = platp->mapbase;
else
return -EINVAL;
@@ -564,7 +564,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res_irq)
port->irq = res_irq->start;
- else if (platp->irq)
+ else if (platp)
port->irq = platp->irq;
/* Check platform data first so we can override device node data */
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 0c65c9e6698..3d569cd68f5 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1946,10 +1946,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
goto unmap;
}
- /* Ensure interrupts from this UART are masked and cleared */
- writew(0, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
-
uap->vendor = vendor;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
@@ -1967,6 +1963,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->port.line = i;
pl011_dma_probe(uap);
+ /* Ensure interrupts from this UART are masked and cleared */
+ writew(0, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
amba_ports[i] = uap;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index f9a6be7a9be..3d7e1ee2fa5 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -389,6 +389,8 @@ static void atmel_start_rx(struct uart_port *port)
{
UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
+ UART_PUT_CR(port, ATMEL_US_RXEN);
+
if (atmel_use_dma_rx(port)) {
/* enable PDC controller */
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
@@ -404,6 +406,8 @@ static void atmel_start_rx(struct uart_port *port)
*/
static void atmel_stop_rx(struct uart_port *port)
{
+ UART_PUT_CR(port, ATMEL_US_RXDIS);
+
if (atmel_use_dma_rx(port)) {
/* disable PDC receive */
UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index e6c3dbd781d..836fe273123 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -154,10 +154,9 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
port->x_char = 0;
return IRQ_HANDLED;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- clps711xuart_stop_tx(port);
- return IRQ_HANDLED;
- }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ goto disable_tx_irq;
count = port->fifosize >> 1;
do {
@@ -171,8 +170,11 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
- clps711xuart_stop_tx(port);
+ if (uart_circ_empty(xmit)) {
+ disable_tx_irq:
+ disable_irq_nosync(TX_IRQ(port));
+ tx_enabled(port) = 0;
+ }
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index a9234ba8f8d..c4b50af46c4 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -127,11 +127,6 @@ static inline void serial_out(struct uart_hsu_port *up, int offset, int value)
#define HSU_REGS_BUFSIZE 1024
-static int hsu_show_regs_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
static ssize_t port_show_regs(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
@@ -231,14 +226,14 @@ static ssize_t dma_show_regs(struct file *file, char __user *user_buf,
static const struct file_operations port_regs_ops = {
.owner = THIS_MODULE,
- .open = hsu_show_regs_open,
+ .open = simple_open,
.read = port_show_regs,
.llseek = default_llseek,
};
static const struct file_operations dma_regs_ops = {
.owner = THIS_MODULE,
- .open = hsu_show_regs_open,
+ .open = simple_open,
.read = dma_show_regs,
.llseek = default_llseek,
};
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 0121486ac4f..d00b38eb268 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1381,29 +1381,24 @@ static int serial_omap_probe(struct platform_device *pdev)
return -ENODEV;
}
- if (!request_mem_region(mem->start, resource_size(mem),
+ if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
pdev->dev.driver->name)) {
dev_err(&pdev->dev, "memory region already claimed\n");
return -EBUSY;
}
dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
- if (!dma_rx) {
- ret = -EINVAL;
- goto err;
- }
+ if (!dma_rx)
+ return -ENXIO;
dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
- if (!dma_tx) {
- ret = -EINVAL;
- goto err;
- }
+ if (!dma_tx)
+ return -ENXIO;
+
+ up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
- up = kzalloc(sizeof(*up), GFP_KERNEL);
- if (up == NULL) {
- ret = -ENOMEM;
- goto do_release_region;
- }
up->pdev = pdev;
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
@@ -1423,16 +1418,17 @@ static int serial_omap_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
up->port.line);
ret = -ENODEV;
- goto err;
+ goto err_port_line;
}
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
- up->port.membase = ioremap(mem->start, resource_size(mem));
+ up->port.membase = devm_ioremap(&pdev->dev, mem->start,
+ resource_size(mem));
if (!up->port.membase) {
dev_err(&pdev->dev, "can't ioremap UART\n");
ret = -ENOMEM;
- goto err;
+ goto err_ioremap;
}
up->port.flags = omap_up_info->flags;
@@ -1478,16 +1474,19 @@ static int serial_omap_probe(struct platform_device *pdev)
ret = uart_add_one_port(&serial_omap_reg, &up->port);
if (ret != 0)
- goto do_release_region;
+ goto err_add_port;
pm_runtime_put(&pdev->dev);
platform_set_drvdata(pdev, up);
return 0;
-err:
+
+err_add_port:
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+err_ioremap:
+err_port_line:
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
pdev->id, __func__, ret);
-do_release_region:
- release_mem_region(mem->start, resource_size(mem));
return ret;
}
@@ -1499,8 +1498,6 @@ static int serial_omap_remove(struct platform_device *dev)
pm_runtime_disable(&up->pdev->dev);
uart_remove_one_port(&serial_omap_reg, &up->port);
pm_qos_remove_request(&up->pm_qos_request);
-
- kfree(up);
}
platform_set_drvdata(dev, NULL);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index e825460478b..c2816f49480 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -210,6 +210,7 @@ enum {
#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
+#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
struct pch_uart_buffer {
unsigned char *buf;
@@ -304,11 +305,7 @@ static const int trigger_level_1[4] = { 1, 1, 1, 1 };
#ifdef CONFIG_DEBUG_FS
#define PCH_REGS_BUFSIZE 1024
-static int pch_show_regs_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
+
static ssize_t port_show_regs(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
@@ -362,7 +359,7 @@ static ssize_t port_show_regs(struct file *file, char __user *user_buf,
static const struct file_operations port_regs_ops = {
.owner = THIS_MODULE,
- .open = pch_show_regs_open,
+ .open = simple_open,
.read = port_show_regs,
.llseek = default_llseek,
};
@@ -388,6 +385,12 @@ static int pch_uart_get_uartclk(void)
if (cmp && strstr(cmp, "Fish River Island II"))
return FRI2_48_UARTCLK;
+ /* Kontron COMe-mTT10 (nanoETXexpress-TT) */
+ cmp = dmi_get_system_info(DMI_BOARD_NAME);
+ if (cmp && (strstr(cmp, "COMe-mTT") ||
+ strstr(cmp, "nanoETXexpress-TT")))
+ return NTC1_UARTCLK;
+
return DEFAULT_UARTCLK;
}
@@ -1444,9 +1447,11 @@ static int pch_uart_verify_port(struct uart_port *port,
__func__);
return -EOPNOTSUPP;
#endif
- priv->use_dma = 1;
priv->use_dma_flag = 1;
dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
+ if (!priv->use_dma)
+ pch_request_dma(port);
+ priv->use_dma = 1;
}
return 0;
@@ -1655,6 +1660,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
}
pci_enable_msi(pdev);
+ pci_set_master(pdev);
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 08ebe901bb5..654755a990d 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -469,7 +469,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
if (!ZS_IS_OPEN(uap_a)) {
- pmz_debug("ChanA interrupt while open !\n");
+ pmz_debug("ChanA interrupt while not open !\n");
goto skip_a;
}
write_zsreg(uap_a, R0, RES_H_IUS);
@@ -493,8 +493,8 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
spin_lock(&uap_b->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
- if (!ZS_IS_OPEN(uap_a)) {
- pmz_debug("ChanB interrupt while open !\n");
+ if (!ZS_IS_OPEN(uap_b)) {
+ pmz_debug("ChanB interrupt while not open !\n");
goto skip_b;
}
write_zsreg(uap_b, R0, RES_H_IUS);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index de249d265be..d8b0aee3563 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -982,6 +982,7 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
ucon &= ucon_mask;
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
/* reset both fifos */
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index bf461cf9961..3158e17b665 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -355,9 +355,6 @@ static void sci_serial_out(struct uart_port *p, int offset, int value)
WARN(1, "Invalid register access\n");
}
-#define sci_in(up, offset) (up->serial_in(up, offset))
-#define sci_out(up, offset, value) (up->serial_out(up, offset, value))
-
static int sci_probe_regmap(struct plat_sci_port *cfg)
{
switch (cfg->type) {
@@ -422,9 +419,9 @@ static int sci_poll_get_char(struct uart_port *port)
int c;
do {
- status = sci_in(port, SCxSR);
+ status = serial_port_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
- sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
continue;
}
break;
@@ -433,11 +430,11 @@ static int sci_poll_get_char(struct uart_port *port)
if (!(status & SCxSR_RDxF(port)))
return NO_POLL_CHAR;
- c = sci_in(port, SCxRDR);
+ c = serial_port_in(port, SCxRDR);
/* Dummy read */
- sci_in(port, SCxSR);
- sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ serial_port_in(port, SCxSR);
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
return c;
}
@@ -448,11 +445,11 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
unsigned short status;
do {
- status = sci_in(port, SCxSR);
+ status = serial_port_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
- sci_out(port, SCxTDR, c);
- sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
+ serial_port_out(port, SCxTDR, c);
+ serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
@@ -480,10 +477,10 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
((!(cflag & CRTSCTS)))) {
unsigned short status;
- status = sci_in(port, SCSPTR);
+ status = serial_port_in(port, SCSPTR);
status &= ~SCSPTR_CTSIO;
status |= SCSPTR_RTSIO;
- sci_out(port, SCSPTR, status); /* Set RTS = 1 */
+ serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */
}
}
@@ -493,13 +490,13 @@ static int sci_txfill(struct uart_port *port)
reg = sci_getreg(port, SCTFDR);
if (reg->size)
- return sci_in(port, SCTFDR) & 0xff;
+ return serial_port_in(port, SCTFDR) & 0xff;
reg = sci_getreg(port, SCFDR);
if (reg->size)
- return sci_in(port, SCFDR) >> 8;
+ return serial_port_in(port, SCFDR) >> 8;
- return !(sci_in(port, SCxSR) & SCI_TDRE);
+ return !(serial_port_in(port, SCxSR) & SCI_TDRE);
}
static int sci_txroom(struct uart_port *port)
@@ -513,13 +510,13 @@ static int sci_rxfill(struct uart_port *port)
reg = sci_getreg(port, SCRFDR);
if (reg->size)
- return sci_in(port, SCRFDR) & 0xff;
+ return serial_port_in(port, SCRFDR) & 0xff;
reg = sci_getreg(port, SCFDR);
if (reg->size)
- return sci_in(port, SCFDR) & ((port->fifosize << 1) - 1);
+ return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1);
- return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
+ return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
}
/*
@@ -547,14 +544,14 @@ static void sci_transmit_chars(struct uart_port *port)
unsigned short ctrl;
int count;
- status = sci_in(port, SCxSR);
+ status = serial_port_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
- ctrl = sci_in(port, SCSCR);
+ ctrl = serial_port_in(port, SCSCR);
if (uart_circ_empty(xmit))
ctrl &= ~SCSCR_TIE;
else
ctrl |= SCSCR_TIE;
- sci_out(port, SCSCR, ctrl);
+ serial_port_out(port, SCSCR, ctrl);
return;
}
@@ -573,27 +570,27 @@ static void sci_transmit_chars(struct uart_port *port)
break;
}
- sci_out(port, SCxTDR, c);
+ serial_port_out(port, SCxTDR, c);
port->icount.tx++;
} while (--count > 0);
- sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit)) {
sci_stop_tx(port);
} else {
- ctrl = sci_in(port, SCSCR);
+ ctrl = serial_port_in(port, SCSCR);
if (port->type != PORT_SCI) {
- sci_in(port, SCxSR); /* Dummy read */
- sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ serial_port_in(port, SCxSR); /* Dummy read */
+ serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
}
ctrl |= SCSCR_TIE;
- sci_out(port, SCSCR, ctrl);
+ serial_port_out(port, SCSCR, ctrl);
}
}
@@ -608,7 +605,7 @@ static void sci_receive_chars(struct uart_port *port)
unsigned short status;
unsigned char flag;
- status = sci_in(port, SCxSR);
+ status = serial_port_in(port, SCxSR);
if (!(status & SCxSR_RDxF(port)))
return;
@@ -621,7 +618,7 @@ static void sci_receive_chars(struct uart_port *port)
break;
if (port->type == PORT_SCI) {
- char c = sci_in(port, SCxRDR);
+ char c = serial_port_in(port, SCxRDR);
if (uart_handle_sysrq_char(port, c) ||
sci_port->break_flag)
count = 0;
@@ -629,9 +626,9 @@ static void sci_receive_chars(struct uart_port *port)
tty_insert_flip_char(tty, c, TTY_NORMAL);
} else {
for (i = 0; i < count; i++) {
- char c = sci_in(port, SCxRDR);
+ char c = serial_port_in(port, SCxRDR);
- status = sci_in(port, SCxSR);
+ status = serial_port_in(port, SCxSR);
#if defined(CONFIG_CPU_SH3)
/* Skip "chars" during break */
if (sci_port->break_flag) {
@@ -672,8 +669,8 @@ static void sci_receive_chars(struct uart_port *port)
}
}
- sci_in(port, SCxSR); /* dummy read */
- sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ serial_port_in(port, SCxSR); /* dummy read */
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
copied += count;
port->icount.rx += count;
@@ -683,8 +680,8 @@ static void sci_receive_chars(struct uart_port *port)
/* Tell the rest of the system the news. New characters! */
tty_flip_buffer_push(tty);
} else {
- sci_in(port, SCxSR); /* dummy read */
- sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ serial_port_in(port, SCxSR); /* dummy read */
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
}
@@ -726,7 +723,7 @@ static void sci_break_timer(unsigned long data)
static int sci_handle_errors(struct uart_port *port)
{
int copied = 0;
- unsigned short status = sci_in(port, SCxSR);
+ unsigned short status = serial_port_in(port, SCxSR);
struct tty_struct *tty = port->state->port.tty;
struct sci_port *s = to_sci_port(port);
@@ -804,8 +801,8 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
if (!reg->size)
return 0;
- if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
- sci_out(port, SCLSR, 0);
+ if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
+ serial_port_out(port, SCLSR, 0);
port->icount.overrun++;
@@ -822,7 +819,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
static int sci_handle_breaks(struct uart_port *port)
{
int copied = 0;
- unsigned short status = sci_in(port, SCxSR);
+ unsigned short status = serial_port_in(port, SCxSR);
struct tty_struct *tty = port->state->port.tty;
struct sci_port *s = to_sci_port(port);
@@ -859,8 +856,8 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
struct sci_port *s = to_sci_port(port);
if (s->chan_rx) {
- u16 scr = sci_in(port, SCSCR);
- u16 ssr = sci_in(port, SCxSR);
+ u16 scr = serial_port_in(port, SCSCR);
+ u16 ssr = serial_port_in(port, SCxSR);
/* Disable future Rx interrupts */
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
@@ -869,9 +866,9 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
} else {
scr &= ~SCSCR_RIE;
}
- sci_out(port, SCSCR, scr);
+ serial_port_out(port, SCSCR, scr);
/* Clear current interrupt */
- sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
+ serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
jiffies, s->rx_timeout);
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
@@ -909,15 +906,15 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
/* discard character in rx buffer */
- sci_in(port, SCxSR);
- sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ serial_port_in(port, SCxSR);
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
} else {
sci_handle_fifo_overrun(port);
sci_rx_interrupt(irq, ptr);
}
- sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
/* Kick the transmission */
sci_tx_interrupt(irq, ptr);
@@ -931,7 +928,7 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
/* Handle BREAKs */
sci_handle_breaks(port);
- sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+ serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
return IRQ_HANDLED;
}
@@ -955,8 +952,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
struct sci_port *s = to_sci_port(port);
irqreturn_t ret = IRQ_NONE;
- ssr_status = sci_in(port, SCxSR);
- scr_status = sci_in(port, SCSCR);
+ ssr_status = serial_port_in(port, SCxSR);
+ scr_status = serial_port_in(port, SCSCR);
err_enabled = scr_status & port_rx_irq_mask(port);
/* Tx Interrupt */
@@ -1170,7 +1167,7 @@ static void sci_free_gpios(struct sci_port *port)
static unsigned int sci_tx_empty(struct uart_port *port)
{
- unsigned short status = sci_in(port, SCxSR);
+ unsigned short status = serial_port_in(port, SCxSR);
unsigned short in_tx_fifo = sci_txfill(port);
return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
@@ -1198,7 +1195,7 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
*/
reg = sci_getreg(port, SCFCR);
if (reg->size)
- sci_out(port, SCFCR, sci_in(port, SCFCR) | 1);
+ serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1);
}
}
@@ -1240,8 +1237,8 @@ static void sci_dma_tx_complete(void *arg)
} else {
s->cookie_tx = -EINVAL;
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 ctrl = sci_in(port, SCSCR);
- sci_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ u16 ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
}
}
@@ -1494,13 +1491,13 @@ static void sci_start_tx(struct uart_port *port)
#ifdef CONFIG_SERIAL_SH_SCI_DMA
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 new, scr = sci_in(port, SCSCR);
+ u16 new, scr = serial_port_in(port, SCSCR);
if (s->chan_tx)
new = scr | 0x8000;
else
new = scr & ~0x8000;
if (new != scr)
- sci_out(port, SCSCR, new);
+ serial_port_out(port, SCSCR, new);
}
if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
@@ -1512,8 +1509,8 @@ static void sci_start_tx(struct uart_port *port)
if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = sci_in(port, SCSCR);
- sci_out(port, SCSCR, ctrl | SCSCR_TIE);
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
}
}
@@ -1522,40 +1519,40 @@ static void sci_stop_tx(struct uart_port *port)
unsigned short ctrl;
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = sci_in(port, SCSCR);
+ ctrl = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x8000;
ctrl &= ~SCSCR_TIE;
- sci_out(port, SCSCR, ctrl);
+ serial_port_out(port, SCSCR, ctrl);
}
static void sci_start_rx(struct uart_port *port)
{
unsigned short ctrl;
- ctrl = sci_in(port, SCSCR) | port_rx_irq_mask(port);
+ ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
- sci_out(port, SCSCR, ctrl);
+ serial_port_out(port, SCSCR, ctrl);
}
static void sci_stop_rx(struct uart_port *port)
{
unsigned short ctrl;
- ctrl = sci_in(port, SCSCR);
+ ctrl = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
ctrl &= ~port_rx_irq_mask(port);
- sci_out(port, SCSCR, ctrl);
+ serial_port_out(port, SCSCR, ctrl);
}
static void sci_enable_ms(struct uart_port *port)
@@ -1589,13 +1586,13 @@ static void rx_timer_fn(unsigned long arg)
{
struct sci_port *s = (struct sci_port *)arg;
struct uart_port *port = &s->port;
- u16 scr = sci_in(port, SCSCR);
+ u16 scr = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
scr &= ~0x4000;
enable_irq(s->cfg->irqs[1]);
}
- sci_out(port, SCSCR, scr | SCSCR_RIE);
+ serial_port_out(port, SCSCR, scr | SCSCR_RIE);
dev_dbg(port->dev, "DMA Rx timed out\n");
schedule_work(&s->work_rx);
}
@@ -1776,14 +1773,14 @@ static void sci_reset(struct uart_port *port)
unsigned int status;
do {
- status = sci_in(port, SCxSR);
+ status = serial_port_in(port, SCxSR);
} while (!(status & SCxSR_TEND(port)));
- sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+ serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
reg = sci_getreg(port, SCFCR);
if (reg->size)
- sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+ serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
}
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -1812,7 +1809,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_reset(port);
- smr_val = sci_in(port, SCSMR) & 3;
+ smr_val = serial_port_in(port, SCSMR) & 3;
if ((termios->c_cflag & CSIZE) == CS7)
smr_val |= 0x40;
@@ -1825,19 +1822,19 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
uart_update_timeout(port, termios->c_cflag, baud);
- sci_out(port, SCSMR, smr_val);
+ serial_port_out(port, SCSMR, smr_val);
dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
s->cfg->scscr);
if (t > 0) {
if (t >= 256) {
- sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
+ serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1);
t >>= 2;
} else
- sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
+ serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3);
- sci_out(port, SCBRR, t);
+ serial_port_out(port, SCBRR, t);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
@@ -1845,7 +1842,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
reg = sci_getreg(port, SCFCR);
if (reg->size) {
- unsigned short ctrl = sci_in(port, SCFCR);
+ unsigned short ctrl = serial_port_in(port, SCFCR);
if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) {
if (termios->c_cflag & CRTSCTS)
@@ -1861,10 +1858,10 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
*/
ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
- sci_out(port, SCFCR, ctrl);
+ serial_port_out(port, SCFCR, ctrl);
}
- sci_out(port, SCSCR, s->cfg->scscr);
+ serial_port_out(port, SCSCR, s->cfg->scscr);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
/*
@@ -2166,7 +2163,7 @@ static void serial_console_write(struct console *co, const char *s,
/* wait until fifo is empty and last bit has been transmitted */
bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
- while ((sci_in(port, SCxSR) & bits) != bits)
+ while ((serial_port_in(port, SCxSR) & bits) != bits)
cpu_relax();
sci_port_disable(sci_port);
@@ -2260,12 +2257,12 @@ static int sci_runtime_suspend(struct device *dev)
if (uart_console(port)) {
struct plat_sci_reg *reg;
- sci_port->saved_smr = sci_in(port, SCSMR);
- sci_port->saved_brr = sci_in(port, SCBRR);
+ sci_port->saved_smr = serial_port_in(port, SCSMR);
+ sci_port->saved_brr = serial_port_in(port, SCBRR);
reg = sci_getreg(port, SCFCR);
if (reg->size)
- sci_port->saved_fcr = sci_in(port, SCFCR);
+ sci_port->saved_fcr = serial_port_in(port, SCFCR);
else
sci_port->saved_fcr = 0;
}
@@ -2279,13 +2276,13 @@ static int sci_runtime_resume(struct device *dev)
if (uart_console(port)) {
sci_reset(port);
- sci_out(port, SCSMR, sci_port->saved_smr);
- sci_out(port, SCBRR, sci_port->saved_brr);
+ serial_port_out(port, SCSMR, sci_port->saved_smr);
+ serial_port_out(port, SCBRR, sci_port->saved_brr);
if (sci_port->saved_fcr)
- sci_out(port, SCFCR, sci_port->saved_fcr);
+ serial_port_out(port, SCFCR, sci_port->saved_fcr);
- sci_out(port, SCSCR, sci_port->cfg->scscr);
+ serial_port_out(port, SCSCR, sci_port->cfg->scscr);
}
return 0;
}
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index a1a2d364f92..4c22a1529aa 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -20,10 +20,10 @@
defined(CONFIG_ARCH_SH7372) || \
defined(CONFIG_ARCH_R8A7740)
-# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
-# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
-# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
-# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
+# define SCxSR_RDxF_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfffc)
+# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73)
+# define SCxSR_TDxE_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffdf)
+# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3)
#else
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index b3b70b0bf85..babd9470982 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1581,7 +1581,7 @@ static int __init sunzilog_init(void)
if (err)
goto out_unregister_uart;
- if (!zilog_irq) {
+ if (zilog_irq) {
struct uart_sunzilog_port *up = sunzilog_irq_chain;
err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
"zs", sunzilog_irq_chain);
@@ -1622,7 +1622,7 @@ static void __exit sunzilog_exit(void)
{
platform_driver_unregister(&zs_driver);
- if (!zilog_irq) {
+ if (zilog_irq) {
struct uart_sunzilog_port *up = sunzilog_irq_chain;
/* Disable Interrupts */
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 136e86faa1e..05728894a88 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -327,7 +327,7 @@ static void send_sig_all(int sig)
if (is_global_init(p))
continue;
- force_sig(sig, p);
+ do_send_sig_info(sig, SEND_SIG_FORCED, p, true);
}
read_unlock(&tasklist_lock);
}
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 86dd1e302bb..29ca20dbd33 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1085,15 +1085,21 @@ void vt_set_led_state(int console, int leds)
*
* Handle console start. This is a wrapper for the VT layer
* so that we can keep kbd knowledge internal
+ *
+ * FIXME: We eventually need to hold the kbd lock here to protect
+ * the LED updating. We can't do it yet because fn_hold calls stop_tty
+ * and start_tty under the kbd_event_lock, while normal tty paths
+ * don't hold the lock. We probably need to split out an LED lock
+ * but not during an -rc release!
*/
void vt_kbd_con_start(int console)
{
struct kbd_struct * kbd = kbd_table + console;
- unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+/* unsigned long flags; */
+/* spin_lock_irqsave(&kbd_event_lock, flags); */
clr_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
}
/**
@@ -1102,22 +1108,28 @@ void vt_kbd_con_start(int console)
*
* Handle console stop. This is a wrapper for the VT layer
* so that we can keep kbd knowledge internal
+ *
+ * FIXME: We eventually need to hold the kbd lock here to protect
+ * the LED updating. We can't do it yet because fn_hold calls stop_tty
+ * and start_tty under the kbd_event_lock, while normal tty paths
+ * don't hold the lock. We probably need to split out an LED lock
+ * but not during an -rc release!
*/
void vt_kbd_con_stop(int console)
{
struct kbd_struct * kbd = kbd_table + console;
- unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+/* unsigned long flags; */
+/* spin_lock_irqsave(&kbd_event_lock, flags); */
set_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
}
/*
* This is the tasklet that updates LED state on all keyboards
* attached to the box. The reason we use tasklet is that we
* need to handle the scenario when keyboard handler is not
- * registered yet but we already getting updates form VT to
+ * registered yet but we already getting updates from the VT to
* update led state.
*/
static void kbd_bh(unsigned long dummy)
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 3bdd4b19dd0..2156188db4a 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -2932,11 +2932,10 @@ static int __init con_init(void)
gotoxy(vc, vc->vc_x, vc->vc_y);
csi_J(vc, 0);
update_screen(vc);
- pr_info("Console: %s %s %dx%d",
+ pr_info("Console: %s %s %dx%d\n",
vc->vc_can_do_color ? "colour" : "mono",
display_desc, vc->vc_cols, vc->vc_rows);
printable = 1;
- printk("\n");
console_unlock();
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-15 23:46:25 +0000