summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/amiserial.c4
-rw-r--r--drivers/tty/serial/clps711x.c14
-rw-r--r--drivers/tty/serial/pch_uart.c4
-rw-r--r--drivers/tty/serial/pmac_zilog.c6
-rw-r--r--drivers/tty/vt/keyboard.c28
5 files changed, 37 insertions, 19 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 24145c30c9b..6cc4358f68c 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1073,8 +1073,10 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
(new_serial.close_delay != port->close_delay) ||
(new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
+ (port->flags & ~ASYNC_USR_MASK))) {
+ tty_unlock();
return -EPERM;
+ }
port->flags = ((port->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
state->custom_divisor = new_serial.custom_divisor;
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index e6c3dbd781d..836fe273123 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -154,10 +154,9 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
port->x_char = 0;
return IRQ_HANDLED;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- clps711xuart_stop_tx(port);
- return IRQ_HANDLED;
- }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ goto disable_tx_irq;
count = port->fifosize >> 1;
do {
@@ -171,8 +170,11 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
- clps711xuart_stop_tx(port);
+ if (uart_circ_empty(xmit)) {
+ disable_tx_irq:
+ disable_irq_nosync(TX_IRQ(port));
+ tx_enabled(port) = 0;
+ }
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index bbbec4a74cf..c2816f49480 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1447,9 +1447,11 @@ static int pch_uart_verify_port(struct uart_port *port,
__func__);
return -EOPNOTSUPP;
#endif
- priv->use_dma = 1;
priv->use_dma_flag = 1;
dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
+ if (!priv->use_dma)
+ pch_request_dma(port);
+ priv->use_dma = 1;
}
return 0;
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 08ebe901bb5..654755a990d 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -469,7 +469,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
if (!ZS_IS_OPEN(uap_a)) {
- pmz_debug("ChanA interrupt while open !\n");
+ pmz_debug("ChanA interrupt while not open !\n");
goto skip_a;
}
write_zsreg(uap_a, R0, RES_H_IUS);
@@ -493,8 +493,8 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
spin_lock(&uap_b->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
- if (!ZS_IS_OPEN(uap_a)) {
- pmz_debug("ChanB interrupt while open !\n");
+ if (!ZS_IS_OPEN(uap_b)) {
+ pmz_debug("ChanB interrupt while not open !\n");
goto skip_b;
}
write_zsreg(uap_b, R0, RES_H_IUS);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 86dd1e302bb..3b0c4e32ed7 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1085,15 +1085,21 @@ void vt_set_led_state(int console, int leds)
*
* Handle console start. This is a wrapper for the VT layer
* so that we can keep kbd knowledge internal
+ *
+ * FIXME: We eventually need to hold the kbd lock here to protect
+ * the LED updating. We can't do it yet because fn_hold calls stop_tty
+ * and start_tty under the kbd_event_lock, while normal tty paths
+ * don't hold the lock. We probably need to split out an LED lock
+ * but not during an -rc release!
*/
void vt_kbd_con_start(int console)
{
struct kbd_struct * kbd = kbd_table + console;
- unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+/* unsigned long flags; */
+/* spin_lock_irqsave(&kbd_event_lock, flags); */
clr_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
}
/**
@@ -1102,22 +1108,28 @@ void vt_kbd_con_start(int console)
*
* Handle console stop. This is a wrapper for the VT layer
* so that we can keep kbd knowledge internal
+ *
+ * FIXME: We eventually need to hold the kbd lock here to protect
+ * the LED updating. We can't do it yet because fn_hold calls stop_tty
+ * and start_tty under the kbd_event_lock, while normal tty paths
+ * don't hold the lock. We probably need to split out an LED lock
+ * but not during an -rc release!
*/
void vt_kbd_con_stop(int console)
{
struct kbd_struct * kbd = kbd_table + console;
- unsigned long flags;
- spin_lock_irqsave(&kbd_event_lock, flags);
+/* unsigned long flags; */
+/* spin_lock_irqsave(&kbd_event_lock, flags); */
set_vc_kbd_led(kbd, VC_SCROLLOCK);
set_leds();
- spin_unlock_irqrestore(&kbd_event_lock, flags);
+/* spin_unlock_irqrestore(&kbd_event_lock, flags); */
}
/*
* This is the tasklet that updates LED state on all keyboards
* attached to the box. The reason we use tasklet is that we
* need to handle the scenario when keyboard handler is not
- * registered yet but we already getting updates form VT to
+ * registered yet but we already getting updates from the VT to
* update led state.
*/
static void kbd_bh(unsigned long dummy)
@@ -2032,7 +2044,7 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm)
kbd->default_ledflagstate = ((arg >> 4) & 7);
set_leds();
spin_unlock_irqrestore(&kbd_event_lock, flags);
- break;
+ return 0;
/* the ioctls below only set the lights, not the functions */
/* for those, see KDGKBLED and KDSKBLED above */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 07:05:26 +0000