diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/hvc/hvc_opal.c | 2 | ||||
-rw-r--r-- | drivers/tty/hvc/hvc_xen.c | 15 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/amba-pl011.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 6 | ||||
-rw-r--r-- | drivers/tty/serial/mxs-auart.c | 42 | ||||
-rw-r--r-- | drivers/tty/serial/of_serial.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/pch_uart.c | 59 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 6 | ||||
-rw-r--r-- | drivers/tty/serial/sh-sci.c | 8 | ||||
-rw-r--r-- | drivers/tty/tty_ldisc.c | 2 | ||||
-rw-r--r-- | drivers/tty/vt/vt_ioctl.c | 47 |
13 files changed, 143 insertions, 59 deletions
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index ced26c8ccd5..0d2ea0c224c 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -401,7 +401,7 @@ out: } #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW -void __init udbg_init_debug_opal(void) +void __init udbg_init_debug_opal_raw(void) { u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO; hvc_opal_privs[index] = &hvc_opal_boot_priv; diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 944eaeb8e0c..1e456dca4f6 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -209,11 +209,10 @@ static int xen_hvm_console_init(void) info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); if (!info) return -ENOMEM; - } - - /* already configured */ - if (info->intf != NULL) + } else if (info->intf != NULL) { + /* already configured */ return 0; + } /* * If the toolstack (or the hypervisor) hasn't set these values, the * default value is 0. Even though mfn = 0 and evtchn = 0 are @@ -259,12 +258,10 @@ static int xen_pv_console_init(void) info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); if (!info) return -ENOMEM; - } - - /* already configured */ - if (info->intf != NULL) + } else if (info->intf != NULL) { + /* already configured */ return 0; - + } info->evtchn = xen_start_info->console.domU.evtchn; info->intf = mfn_to_virt(xen_start_info->console.domU.mfn); info->vtermno = HVC_COOKIE; diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 6e1958a325b..8123f784bcd 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -282,6 +282,14 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR, }, + [PORT_LPC3220] = { + .name = "LPC3220", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index c17923ec6e9..d3553b5d3fc 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -53,9 +53,9 @@ #include <linux/delay.h> #include <linux/types.h> #include <linux/pinctrl/consumer.h> +#include <linux/sizes.h> #include <asm/io.h> -#include <asm/sizes.h> #define UART_NR 14 diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 4ef747307ec..d5c689d6217 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -169,7 +169,6 @@ #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 #define DEV_NAME "ttymxc" -#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS /* * This determines how often we check the modem status signals @@ -741,10 +740,7 @@ static int imx_startup(struct uart_port *port) /* do not use RTS IRQ on IrDA */ if (!USE_IRDA(sport)) { - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : - IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, + retval = request_irq(sport->rtsirq, imx_rtsint, 0, DRIVER_NAME, sport); if (retval) goto error_out3; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index ec56d8397aa..2e341b81ff8 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -33,6 +33,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/pinctrl/consumer.h> +#include <linux/of_device.h> #include <asm/cacheflush.h> @@ -675,6 +676,30 @@ static struct uart_driver auart_driver = { #endif }; +/* + * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it + * could successfully get all information from dt or a negative errno. + */ +static int serial_mxs_probe_dt(struct mxs_auart_port *s, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + /* no device tree device */ + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); + return ret; + } + s->port.line = ret; + + return 0; +} + static int __devinit mxs_auart_probe(struct platform_device *pdev) { struct mxs_auart_port *s; @@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) goto out; } + ret = serial_mxs_probe_dt(s, pdev); + if (ret > 0) + s->port.line = pdev->id < 0 ? 0 : pdev->id; + else if (ret < 0) + goto out_free; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); if (IS_ERR(pinctrl)) { ret = PTR_ERR(pinctrl); @@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) s->port.membase = ioremap(r->start, resource_size(r)); s->port.ops = &mxs_auart_ops; s->port.iotype = UPIO_MEM; - s->port.line = pdev->id < 0 ? 0 : pdev->id; s->port.fifosize = 16; s->port.uartclk = clk_get_rate(s->clk); s->port.type = PORT_IMX; @@ -728,7 +758,7 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, s); - auart_port[pdev->id] = s; + auart_port[s->port.line] = s; mxs_auart_reset(&s->port); @@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev) return 0; } +static struct of_device_id mxs_auart_dt_ids[] = { + { .compatible = "fsl,imx23-auart", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); + static struct platform_driver mxs_auart_driver = { .probe = mxs_auart_probe, .remove = __devexit_p(mxs_auart_remove), .driver = { .name = "mxs-auart", .owner = THIS_MODULE, + .of_match_table = mxs_auart_dt_ids, }, }; @@ -807,3 +844,4 @@ module_init(mxs_auart_init); module_exit(mxs_auart_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Freescale MXS application uart driver"); +MODULE_ALIAS("platform:mxs-auart"); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 5410c063726..34e71874a89 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -208,6 +208,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = { { .compatible = "ns16750", .data = (void *)PORT_16750, }, { .compatible = "ns16850", .data = (void *)PORT_16850, }, { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, }, + { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL { .compatible = "ibm,qpace-nwp-serial", .data = (void *)PORT_NWPSERIAL, }, diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 4fdec6a6b75..558ce8509a9 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -253,6 +253,9 @@ struct eg20t_port { dma_addr_t rx_buf_dma; struct dentry *debugfs; + + /* protect the eg20t_port private structure and io access to membase */ + spinlock_t lock; }; /** @@ -754,7 +757,8 @@ static void pch_dma_rx_complete(void *arg) tty_flip_buffer_push(tty); tty_kref_put(tty); async_tx_ack(priv->desc_rx); - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } static void pch_dma_tx_complete(void *arg) @@ -809,7 +813,8 @@ static int handle_rx_to(struct eg20t_port *priv) int rx_size; int ret; if (!priv->start_rx) { - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); return 0; } buf = &priv->rxbuf; @@ -1058,7 +1063,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) int next = 1; u8 msr; - spin_lock_irqsave(&priv->port.lock, flags); + spin_lock_irqsave(&priv->lock, flags); handled = 0; while (next) { iid = pch_uart_hal_get_iid(priv); @@ -1078,11 +1083,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) case PCH_UART_IID_RDR: /* Received Data Ready */ if (priv->use_dma) { pch_uart_hal_disable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); ret = dma_handle_rx(priv); if (!ret) pch_uart_hal_enable_interrupt(priv, - PCH_UART_HAL_RX_INT); + PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } else { ret = handle_rx(priv); } @@ -1116,7 +1123,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) handled |= (unsigned int)ret; } - spin_unlock_irqrestore(&priv->port.lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); return IRQ_RETVAL(handled); } @@ -1208,7 +1215,8 @@ static void pch_uart_stop_rx(struct uart_port *port) struct eg20t_port *priv; priv = container_of(port, struct eg20t_port, port); priv->start_rx = 0; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); } /* Enable the modem status interrupts. */ @@ -1226,9 +1234,9 @@ static void pch_uart_break_ctl(struct uart_port *port, int ctl) unsigned long flags; priv = container_of(port, struct eg20t_port, port); - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&priv->lock, flags); pch_uart_hal_set_break(priv, ctl); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&priv->lock, flags); } /* Grab any interrupt resources and initialise any low level driver state. */ @@ -1263,6 +1271,7 @@ static int pch_uart_startup(struct uart_port *port) break; case 16: fifo_size = PCH_UART_HAL_FIFO16; + break; case 1: default: fifo_size = PCH_UART_HAL_FIFO_DIS; @@ -1300,7 +1309,8 @@ static int pch_uart_startup(struct uart_port *port) pch_request_dma(port); priv->start_rx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT | + PCH_UART_HAL_RX_ERR_INT); uart_update_timeout(port, CS8, default_baud); return 0; @@ -1358,7 +1368,7 @@ static void pch_uart_set_termios(struct uart_port *port, stb = PCH_UART_HAL_STB1; if (termios->c_cflag & PARENB) { - if (!(termios->c_cflag & PARODD)) + if (termios->c_cflag & PARODD) parity = PCH_UART_HAL_PARITY_ODD; else parity = PCH_UART_HAL_PARITY_EVEN; @@ -1376,7 +1386,8 @@ static void pch_uart_set_termios(struct uart_port *port, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&priv->lock, flags); + spin_lock(&port->lock); uart_update_timeout(port, termios->c_cflag, baud); rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); @@ -1389,7 +1400,8 @@ static void pch_uart_set_termios(struct uart_port *port, tty_termios_encode_baud_rate(termios, baud, baud); out: - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock(&port->lock); + spin_unlock_irqrestore(&priv->lock, flags); } static const char *pch_uart_type(struct uart_port *port) @@ -1538,8 +1550,9 @@ pch_console_write(struct console *co, const char *s, unsigned int count) { struct eg20t_port *priv; unsigned long flags; + int priv_locked = 1; + int port_locked = 1; u8 ier; - int locked = 1; priv = pch_uart_ports[co->index]; @@ -1547,12 +1560,16 @@ pch_console_write(struct console *co, const char *s, unsigned int count) local_irq_save(flags); if (priv->port.sysrq) { - /* serial8250_handle_port() already took the lock */ - locked = 0; + spin_lock(&priv->lock); + /* serial8250_handle_port() already took the port lock */ + port_locked = 0; } else if (oops_in_progress) { - locked = spin_trylock(&priv->port.lock); - } else + priv_locked = spin_trylock(&priv->lock); + port_locked = spin_trylock(&priv->port.lock); + } else { + spin_lock(&priv->lock); spin_lock(&priv->port.lock); + } /* * First save the IER then disable the interrupts @@ -1570,8 +1587,10 @@ pch_console_write(struct console *co, const char *s, unsigned int count) wait_for_xmitr(priv, BOTH_EMPTY); iowrite8(ier, priv->membase + UART_IER); - if (locked) + if (port_locked) spin_unlock(&priv->port.lock); + if (priv_locked) + spin_unlock(&priv->lock); local_irq_restore(flags); } @@ -1669,6 +1688,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, pci_enable_msi(pdev); pci_set_master(pdev); + spin_lock_init(&priv->lock); + iobase = pci_resource_start(pdev, 0); mapbase = pci_resource_start(pdev, 1); priv->mapbase = mapbase; diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index d8b0aee3563..02d07bfcfa8 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1014,10 +1014,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, * a disturbance in the clock-rate over the change. */ - if (IS_ERR(port->clk)) + if (IS_ERR(port->baudclk)) goto exit; - if (port->baudclk_rate == clk_get_rate(port->clk)) + if (port->baudclk_rate == clk_get_rate(port->baudclk)) goto exit; if (val == CPUFREQ_PRECHANGE) { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 246b823c1b2..a21dc8e3b7c 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2527,14 +2527,16 @@ void uart_insert_char(struct uart_port *port, unsigned int status, struct tty_struct *tty = port->state->port.tty; if ((status & port->ignore_status_mask & ~overrun) == 0) - tty_insert_flip_char(tty, ch, flag); + if (tty_insert_flip_char(tty, ch, flag) == 0) + ++port->icount.buf_overrun; /* * Overrun is special. Since it's reported immediately, * it doesn't affect the current character. */ if (status & ~port->ignore_status_mask & overrun) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + if (tty_insert_flip_char(tty, 0, TTY_OVERRUN) == 0) + ++port->icount.buf_overrun; } EXPORT_SYMBOL_GPL(uart_insert_char); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 1bd9163bc11..d4d8c9453cd 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1615,9 +1615,9 @@ static bool filter(struct dma_chan *chan, void *slave) struct sh_dmae_slave *param = slave; dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, - param->slave_id); + param->shdma_slave.slave_id); - chan->private = param; + chan->private = ¶m->shdma_slave; return true; } @@ -1656,7 +1656,7 @@ static void sci_request_dma(struct uart_port *port) param = &s->param_tx; /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ - param->slave_id = s->cfg->dma_slave_tx; + param->shdma_slave.slave_id = s->cfg->dma_slave_tx; s->cookie_tx = -EINVAL; chan = dma_request_channel(mask, filter, param); @@ -1684,7 +1684,7 @@ static void sci_request_dma(struct uart_port *port) param = &s->param_rx; /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ - param->slave_id = s->cfg->dma_slave_rx; + param->shdma_slave.slave_id = s->cfg->dma_slave_rx; chan = dma_request_channel(mask, filter, param); dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 9911eb6b34c..6f99c9959f0 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -659,7 +659,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) goto enable; } - if (test_bit(TTY_HUPPED, &tty->flags)) { + if (test_bit(TTY_HUPPING, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ clear_bit(TTY_LDISC_CHANGING, &tty->flags); diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 64618547be1..b841f56d2e6 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -110,16 +110,7 @@ void vt_event_post(unsigned int event, unsigned int old, unsigned int new) wake_up_interruptible(&vt_event_waitqueue); } -/** - * vt_event_wait - wait for an event - * @vw: our event - * - * Waits for an event to occur which completes our vt_event_wait - * structure. On return the structure has wv->done set to 1 for success - * or 0 if some event such as a signal ended the wait. - */ - -static void vt_event_wait(struct vt_event_wait *vw) +static void __vt_event_queue(struct vt_event_wait *vw) { unsigned long flags; /* Prepare the event */ @@ -129,8 +120,18 @@ static void vt_event_wait(struct vt_event_wait *vw) spin_lock_irqsave(&vt_event_lock, flags); list_add(&vw->list, &vt_events); spin_unlock_irqrestore(&vt_event_lock, flags); +} + +static void __vt_event_wait(struct vt_event_wait *vw) +{ /* Wait for it to pass */ wait_event_interruptible(vt_event_waitqueue, vw->done); +} + +static void __vt_event_dequeue(struct vt_event_wait *vw) +{ + unsigned long flags; + /* Dequeue it */ spin_lock_irqsave(&vt_event_lock, flags); list_del(&vw->list); @@ -138,6 +139,22 @@ static void vt_event_wait(struct vt_event_wait *vw) } /** + * vt_event_wait - wait for an event + * @vw: our event + * + * Waits for an event to occur which completes our vt_event_wait + * structure. On return the structure has wv->done set to 1 for success + * or 0 if some event such as a signal ended the wait. + */ + +static void vt_event_wait(struct vt_event_wait *vw) +{ + __vt_event_queue(vw); + __vt_event_wait(vw); + __vt_event_dequeue(vw); +} + +/** * vt_event_wait_ioctl - event ioctl handler * @arg: argument to ioctl * @@ -177,10 +194,14 @@ int vt_waitactive(int n) { struct vt_event_wait vw; do { - if (n == fg_console + 1) - break; vw.event.event = VT_EVENT_SWITCH; - vt_event_wait(&vw); + __vt_event_queue(&vw); + if (n == fg_console + 1) { + __vt_event_dequeue(&vw); + break; + } + __vt_event_wait(&vw); + __vt_event_dequeue(&vw); if (vw.done == 0) return -EINTR; } while (vw.event.newev != n); |