summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_console.c7
-rw-r--r--drivers/tty/serial/8250/8250_hp300.c20
-rw-r--r--drivers/tty/serial/Kconfig4
-rw-r--r--drivers/tty/serial/max310x.c1
-rw-r--r--drivers/tty/serial/omap-serial.c12
-rw-r--r--drivers/tty/serial/sccnxp.c1
-rw-r--r--drivers/tty/serial/sh-sci.c3
-rw-r--r--drivers/tty/sysrq.c1
-rw-r--r--drivers/tty/vt/vt.c8
9 files changed, 27 insertions, 30 deletions
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index a5dec1ca1b8..13ee53bd0bf 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -424,7 +424,6 @@ static void hvc_hangup(struct tty_struct *tty)
{
struct hvc_struct *hp = tty->driver_data;
unsigned long flags;
- int temp_open_count;
if (!hp)
return;
@@ -444,7 +443,6 @@ static void hvc_hangup(struct tty_struct *tty)
return;
}
- temp_open_count = hp->port.count;
hp->port.count = 0;
spin_unlock_irqrestore(&hp->port.lock, flags);
tty_port_tty_set(&hp->port, NULL);
@@ -453,11 +451,6 @@ static void hvc_hangup(struct tty_struct *tty)
if (hp->ops->notifier_hangup)
hp->ops->notifier_hangup(hp, hp->data);
-
- while(temp_open_count) {
- --temp_open_count;
- tty_port_put(&hp->port);
- }
}
/*
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index 8f1dd2cc00a..f3d0edf4664 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -162,7 +162,7 @@ int __init hp300_setup_serial_console(void)
static int __devinit hpdca_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int line;
#ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -174,19 +174,19 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
memset(&uart, 0, sizeof(uart));
/* Memory mapped I/O */
- port.iotype = UPIO_MEM;
- port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
- port.irq = d->ipl;
- port.uartclk = HPDCA_BAUD_BASE * 16;
- port.mapbase = (d->resource.start + UART_OFFSET);
- port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
- port.regshift = 1;
- port.dev = &d->dev;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ uart.port.irq = d->ipl;
+ uart.port.uartclk = HPDCA_BAUD_BASE * 16;
+ uart.port.mapbase = (d->resource.start + UART_OFFSET);
+ uart.port.membase = (char *)(uart.port.mapbase + DIO_VIRADDRBASE);
+ uart.port.regshift = 1;
+ uart.port.dev = &d->dev;
line = serial8250_register_8250_port(&uart);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
- " irq %d failed\n", d->scode, port.irq);
+ " irq %d failed\n", d->scode, uart.port.irq);
return -ENOMEM;
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 233fbaaf255..2a53be5f010 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1150,7 +1150,7 @@ config SERIAL_SC26XX_CONSOLE
Support for Console on SC2681/SC2692 serial ports.
config SERIAL_SCCNXP
- bool "SCCNXP serial port support"
+ tristate "SCCNXP serial port support"
depends on !SERIAL_SC26XX
select SERIAL_CORE
default n
@@ -1162,7 +1162,7 @@ config SERIAL_SCCNXP
config SERIAL_SCCNXP_CONSOLE
bool "Console on SCCNXP serial port"
- depends on SERIAL_SCCNXP
+ depends on SERIAL_SCCNXP=y
select SERIAL_CORE_CONSOLE
help
Support for console on SCCNXP serial ports.
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 2bc28a59d38..1ab1d2c66de 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1239,6 +1239,7 @@ static int __devexit max310x_remove(struct spi_device *spi)
static const struct spi_device_id max310x_id_table[] = {
{ "max3107", MAX310X_TYPE_MAX3107 },
{ "max3108", MAX310X_TYPE_MAX3108 },
+ { }
};
MODULE_DEVICE_TABLE(spi, max310x_id_table);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 6ede6fd92b4..6d3d26a607b 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -671,19 +671,19 @@ serial_omap_configure_xonxoff
/*
* IXON Flag:
- * Flow control for OMAP.TX
- * OMAP.RX should listen for XON/XOFF
+ * Enable XON/XOFF flow control on output.
+ * Transmit XON1, XOFF1
*/
if (termios->c_iflag & IXON)
- up->efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_TX;
/*
* IXOFF Flag:
- * Flow control for OMAP.RX
- * OMAP.TX should send XON/XOFF
+ * Enable XON/XOFF flow control on input.
+ * Receiver compares XON1, XOFF1.
*/
if (termios->c_iflag & IXOFF)
- up->efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_RX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index b7086d004f5..e821068cd95 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -971,6 +971,7 @@ static const struct platform_device_id sccnxp_id_table[] = {
{ "sc28202", SCCNXP_TYPE_SC28202 },
{ "sc68681", SCCNXP_TYPE_SC68681 },
{ "sc68692", SCCNXP_TYPE_SC68692 },
+ { },
};
MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9be296cf729..6ee59001d61 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -530,7 +530,8 @@ static inline int sci_rxd_in(struct uart_port *port)
if (s->cfg->port_reg <= 0)
return 1;
- return !!__raw_readb(s->cfg->port_reg);
+ /* Cast for ARM damage */
+ return !!__raw_readb((void __iomem *)s->cfg->port_reg);
}
/* ********************************************************************** *
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 05728894a88..16ee6cee07d 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -452,6 +452,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
NULL, /* v */
&sysrq_showstate_blocked_op, /* w */
/* x: May be registered on ppc/powerpc for xmon */
+ /* x: May be registered on sparc64 for global PMU dump */
NULL, /* x */
/* y: May be registered on sparc64 for global register dump */
NULL, /* y */
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index f87d7e8964b..4e0d0c3734b 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -539,25 +539,25 @@ static void insert_char(struct vc_data *vc, unsigned int nr)
{
unsigned short *p = (unsigned short *) vc->vc_pos;
- scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x);
+ scr_memmovew(p + nr, p, (vc->vc_cols - vc->vc_x) * 2);
scr_memsetw(p, vc->vc_video_erase_char, nr * 2);
vc->vc_need_wrap = 0;
if (DO_UPDATE(vc))
do_update_region(vc, (unsigned long) p,
- (vc->vc_cols - vc->vc_x) / 2 + 1);
+ vc->vc_cols - vc->vc_x);
}
static void delete_char(struct vc_data *vc, unsigned int nr)
{
unsigned short *p = (unsigned short *) vc->vc_pos;
- scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr);
+ scr_memcpyw(p, p + nr, (vc->vc_cols - vc->vc_x - nr) * 2);
scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char,
nr * 2);
vc->vc_need_wrap = 0;
if (DO_UPDATE(vc))
do_update_region(vc, (unsigned long) p,
- (vc->vc_cols - vc->vc_x) / 2);
+ vc->vc_cols - vc->vc_x);
}
static int softcursor_original;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-20 19:14:18 +0000