summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/mxser.c8
-rw-r--r--drivers/tty/serial/8250/8250_core.c (renamed from drivers/tty/serial/8250/8250.c)6
-rw-r--r--drivers/tty/serial/8250/8250_pci.c13
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c12
-rw-r--r--drivers/tty/serial/8250/Kconfig17
-rw-r--r--drivers/tty/serial/8250/Makefile8
-rw-r--r--drivers/tty/serial/atmel_serial.c11
-rw-r--r--drivers/tty/serial/omap-serial.c11
-rw-r--r--drivers/tty/serial/sunsu.c21
-rw-r--r--drivers/tty/serial/xilinx_uartps.c2
-rw-r--r--drivers/tty/tty_io.c18
-rw-r--r--drivers/tty/vt/vc_screen.c6
12 files changed, 94 insertions, 39 deletions
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 484b6a3c9b0..302909ccf18 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2643,9 +2643,9 @@ static int mxser_probe(struct pci_dev *pdev,
mxvar_sdriver, brd->idx + i, &pdev->dev);
if (IS_ERR(tty_dev)) {
retval = PTR_ERR(tty_dev);
- for (i--; i >= 0; i--)
+ for (; i > 0; i--)
tty_unregister_device(mxvar_sdriver,
- brd->idx + i);
+ brd->idx + i - 1);
goto err_relbrd;
}
}
@@ -2751,9 +2751,9 @@ static int __init mxser_module_init(void)
tty_dev = tty_port_register_device(&brd->ports[i].port,
mxvar_sdriver, brd->idx + i, NULL);
if (IS_ERR(tty_dev)) {
- for (i--; i >= 0; i--)
+ for (; i > 0; i--)
tty_unregister_device(mxvar_sdriver,
- brd->idx + i);
+ brd->idx + i - 1);
for (i = 0; i < brd->info->nports; i++)
tty_port_destroy(&brd->ports[i].port);
free_irq(brd->irq, brd);
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250_core.c
index cf6a5383748..35f9c96aada 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3418,6 +3418,7 @@ MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
#ifndef MODULE
/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
* working as well for the module options so we don't break people. We
@@ -3432,7 +3433,7 @@ MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
static void __used s8250_options(void)
{
#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250."
+#define MODULE_PARAM_PREFIX "8250_core."
module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
@@ -3444,5 +3445,6 @@ static void __used s8250_options(void)
#endif
}
#else
-MODULE_ALIAS("8250");
+MODULE_ALIAS("8250_core");
+#endif
#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index aa76825229d..26e3a97ab15 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
#define PCI_VENDOR_ID_WCH 0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
@@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
+ /* WCH CH352 2S card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH352_2S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
/*
* ASIX devices with FIFO bug
*/
@@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
/*
* Commtech, Inc. Fastcom adapters
*/
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index b3455a970a1..35d9ab95c5c 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,7 +429,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
- struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
@@ -440,12 +439,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
- res = pnp_get_resource(dev, IORESOURCE_IO, 2);
- else if (pnp_port_valid(dev, 0))
- res = pnp_get_resource(dev, IORESOURCE_IO, 0);
- if (pnp_resource_enabled(res)) {
- uart.port.iobase = res->start;
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
+ uart.port.iobase = pnp_port_start(dev, 2);
+ uart.port.iotype = UPIO_PORT;
+ } else if (pnp_port_valid(dev, 0)) {
+ uart.port.iobase = pnp_port_start(dev, 0);
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 2ef9537bcb2..80fe91e64a5 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -33,6 +33,23 @@ config SERIAL_8250
Most people will say Y or M here, so that they can use serial mice,
modems and similar devices connecting to the standard serial ports.
+config SERIAL_8250_DEPRECATED_OPTIONS
+ bool "Support 8250_core.* kernel options (DEPRECATED)"
+ depends on SERIAL_8250
+ default y
+ ---help---
+ In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+ accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+ 8250.nr_uarts=4. We now renamed the module back to 8250, but if
+ anybody noticed in 3.7 and changed their userspace we still have to
+ keep the 8350_core.* options around until they revert the changes
+ they already did.
+
+ If 8250 is built as a module, this adds 8250_core alias instead.
+
+ If you did not notice yet and/or you have userspace from pre-3.7, it
+ is safe (and recommended) to say N here.
+
config SERIAL_8250_PNP
bool "8250/16550 PNP device support" if EXPERT
depends on SERIAL_8250 && PNP
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index a23838a4d53..36d68d05430 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -2,10 +2,10 @@
# Makefile for the 8250 serial device drivers.
#
-obj-$(CONFIG_SERIAL_8250) += 8250_core.o
-8250_core-y := 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o
+8250-y := 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d4a7c241b75..3467462869c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -158,7 +158,7 @@ struct atmel_uart_port {
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
@@ -1769,15 +1769,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
- ret = find_first_zero_bit(&atmel_ports_in_use,
- sizeof(atmel_ports_in_use));
+ ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
- if (ret > ATMEL_MAX_UART) {
+ if (ret >= ATMEL_MAX_UART) {
ret = -ENODEV;
goto err;
}
- if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+ if (test_and_set_bit(ret, atmel_ports_in_use)) {
/* port already in use */
ret = -EBUSY;
goto err;
@@ -1857,7 +1856,7 @@ static int atmel_serial_remove(struct platform_device *pdev)
/* "port" is allocated statically, so we shouldn't free it */
- clear_bit(port->line, &atmel_ports_in_use);
+ clear_bit(port->line, atmel_ports_in_use);
clk_put(atmel_port->clk);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 4dc41408ecb..30d4f7a783c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -886,6 +886,17 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
/* FIFO ENABLE, DMA MODE */
+ up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
+ /*
+ * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK
+ * sets Enables the granularity of 1 for TRIGGER RX
+ * level. Along with setting RX FIFO trigger level
+ * to 1 (as noted below, 16 characters) and TLR[3:0]
+ * to zero this will result RX FIFO threshold level
+ * to 1 character, instead of 16 as noted in comment
+ * below.
+ */
+
/* Set receive FIFO threshold to 16 characters and
* transmit FIFO threshold to 16 spaces
*/
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index e343d667085..451687cb968 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -968,6 +968,7 @@ static struct uart_ops sunsu_pops = {
#define UART_NR 4
static struct uart_sunsu_port sunsu_ports[UART_NR];
+static int nr_inst; /* Number of already registered ports */
#ifdef CONFIG_SERIO
@@ -1337,13 +1338,8 @@ static int __init sunsu_console_setup(struct console *co, char *options)
printk("Console: ttyS%d (SU)\n",
(sunsu_reg.minor - 64) + co->index);
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- if (co->index >= UART_NR)
- co->index = 0;
+ if (co->index > nr_inst)
+ return -ENODEV;
port = &sunsu_ports[co->index].port;
/*
@@ -1408,7 +1404,6 @@ static enum su_type su_get_type(struct device_node *dp)
static int su_probe(struct platform_device *op)
{
- static int inst;
struct device_node *dp = op->dev.of_node;
struct uart_sunsu_port *up;
struct resource *rp;
@@ -1418,16 +1413,16 @@ static int su_probe(struct platform_device *op)
type = su_get_type(dp);
if (type == SU_PORT_PORT) {
- if (inst >= UART_NR)
+ if (nr_inst >= UART_NR)
return -EINVAL;
- up = &sunsu_ports[inst];
+ up = &sunsu_ports[nr_inst];
} else {
up = kzalloc(sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
}
- up->port.line = inst;
+ up->port.line = nr_inst;
spin_lock_init(&up->port.lock);
@@ -1461,6 +1456,8 @@ static int su_probe(struct platform_device *op)
}
dev_set_drvdata(&op->dev, up);
+ nr_inst++;
+
return 0;
}
@@ -1488,7 +1485,7 @@ static int su_probe(struct platform_device *op)
dev_set_drvdata(&op->dev, up);
- inst++;
+ nr_inst++;
return 0;
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ba451c7209f..f36bbba1ac8 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -578,6 +578,8 @@ static int xuartps_startup(struct uart_port *port)
/* Receive Timeout register is enabled with value of 10 */
xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ /* Clear out any pending interrupts before enabling them */
+ xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
/* Set the Interrupt Registers with desired interrupts */
xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 05400acbc45..b0452688308 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -941,6 +941,14 @@ void start_tty(struct tty_struct *tty)
EXPORT_SYMBOL(start_tty);
+static void tty_update_time(struct timespec *time)
+{
+ unsigned long sec = get_seconds();
+ sec -= sec % 60;
+ if ((long)(sec - time->tv_sec) > 0)
+ time->tv_sec = sec;
+}
+
/**
* tty_read - read method for tty device files
* @file: pointer to tty file
@@ -960,10 +968,11 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
int i;
+ struct inode *inode = file_inode(file);
struct tty_struct *tty = file_tty(file);
struct tty_ldisc *ld;
- if (tty_paranoia_check(tty, file_inode(file), "tty_read"))
+ if (tty_paranoia_check(tty, inode, "tty_read"))
return -EIO;
if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
return -EIO;
@@ -977,6 +986,9 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
i = -EIO;
tty_ldisc_deref(ld);
+ if (i > 0)
+ tty_update_time(&inode->i_atime);
+
return i;
}
@@ -1077,8 +1089,10 @@ static inline ssize_t do_tty_write(
break;
cond_resched();
}
- if (written)
+ if (written) {
+ tty_update_time(&file_inode(file)->i_mtime);
ret = written;
+ }
out:
tty_write_unlock(tty);
return ret;
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index e4ca345873c..d7799deacb2 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -93,7 +93,7 @@ vcs_poll_data_free(struct vcs_poll_data *poll)
static struct vcs_poll_data *
vcs_poll_data_get(struct file *file)
{
- struct vcs_poll_data *poll = file->private_data;
+ struct vcs_poll_data *poll = file->private_data, *kill = NULL;
if (poll)
return poll;
@@ -122,10 +122,12 @@ vcs_poll_data_get(struct file *file)
file->private_data = poll;
} else {
/* someone else raced ahead of us */
- vcs_poll_data_free(poll);
+ kill = poll;
poll = file->private_data;
}
spin_unlock(&file->f_lock);
+ if (kill)
+ vcs_poll_data_free(kill);
return poll;
}