summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/chipidea/udc.c')
-rw-r--r--drivers/usb/chipidea/udc.c90
1 files changed, 35 insertions, 55 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 6b4c2f2eb94..4ab2cb62dfc 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -20,7 +20,6 @@
#include <linux/pm_runtime.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
#include <linux/usb/chipidea.h>
#include "ci.h"
@@ -106,7 +105,7 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
do {
/* flush any pending transfer */
- hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n));
+ hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
cpu_relax();
} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
@@ -206,7 +205,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
return -EAGAIN;
- hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n));
+ hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
cpu_relax();
@@ -394,6 +393,14 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
+ u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+ if (hwreq->req.length == 0
+ || hwreq->req.length % hwep->ep.maxpacket)
+ mul++;
+ node->ptr->token |= mul << __ffs(TD_MULTO);
+ }
temp = (u32) (hwreq->req.dma + hwreq->req.actual);
if (length) {
@@ -516,10 +523,11 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
hwep->qh.ptr->td.token &=
cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
- if (hwep->type == USB_ENDPOINT_XFER_ISOC) {
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
u32 mul = hwreq->req.length / hwep->ep.maxpacket;
- if (hwreq->req.length % hwep->ep.maxpacket)
+ if (hwreq->req.length == 0
+ || hwreq->req.length % hwep->ep.maxpacket)
mul++;
hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
}
@@ -686,9 +694,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
usb_ep_fifo_flush(&ci->ep0out->ep);
usb_ep_fifo_flush(&ci->ep0in->ep);
- if (ci->driver)
- ci->driver->disconnect(gadget);
-
/* make sure to disable all endpoints */
gadget_for_each_ep(ep, gadget) {
usb_ep_disable(ep);
@@ -718,6 +723,11 @@ __acquires(ci->lock)
int retval;
spin_unlock(&ci->lock);
+ if (ci->gadget.speed != USB_SPEED_UNKNOWN) {
+ if (ci->driver)
+ ci->driver->disconnect(&ci->gadget);
+ }
+
retval = _gadget_stop_activity(&ci->gadget);
if (retval)
goto done;
@@ -1172,6 +1182,12 @@ static int ep_enable(struct usb_ep *ep,
if (hwep->num)
cap |= QH_ZLT;
cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
+ /*
+ * For ISO-TX, we set mult at QH as the largest value, and use
+ * MultO at TD as real mult value.
+ */
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
+ cap |= 3 << __ffs(QH_MULT);
hwep->qh.ptr->cap = cpu_to_le32(cap);
@@ -1461,6 +1477,8 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
hw_device_state(ci, ci->ep0out->qh.dma);
dev_dbg(ci->dev, "Connected to host\n");
} else {
+ if (ci->driver)
+ ci->driver->disconnect(&ci->gadget);
hw_device_state(ci, 0);
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
@@ -1563,7 +1581,7 @@ static int init_eps(struct ci_hdrc *ci)
* eps, maxP is set by epautoconfig() called
* by gadget layer
*/
- hwep->ep.maxpacket = (unsigned short)~0;
+ usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
INIT_LIST_HEAD(&hwep->qh.queue);
hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
@@ -1583,7 +1601,7 @@ static int init_eps(struct ci_hdrc *ci)
else
ci->ep0in = hwep;
- hwep->ep.maxpacket = CTRL_PAYLOAD_MAX;
+ usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
continue;
}
@@ -1600,6 +1618,8 @@ static void destroy_eps(struct ci_hdrc *ci)
for (i = 0; i < ci->hw_ep_max; i++) {
struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
+ if (hwep->pending_td)
+ free_pending_td(hwep);
dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
}
}
@@ -1631,23 +1651,22 @@ static int ci_udc_start(struct usb_gadget *gadget,
retval = usb_ep_enable(&ci->ep0in->ep);
if (retval)
return retval;
- spin_lock_irqsave(&ci->lock, flags);
ci->driver = driver;
pm_runtime_get_sync(&ci->gadget.dev);
if (ci->vbus_active) {
+ spin_lock_irqsave(&ci->lock, flags);
hw_device_reset(ci, USBMODE_CM_DC);
} else {
pm_runtime_put_sync(&ci->gadget.dev);
- goto done;
+ return retval;
}
retval = hw_device_state(ci, ci->ep0out->qh.dma);
+ spin_unlock_irqrestore(&ci->lock, flags);
if (retval)
pm_runtime_put_sync(&ci->gadget.dev);
- done:
- spin_unlock_irqrestore(&ci->lock, flags);
return retval;
}
@@ -1667,13 +1686,13 @@ static int ci_udc_stop(struct usb_gadget *gadget,
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
CI_HDRC_CONTROLLER_STOPPED_EVENT);
- ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
_gadget_stop_activity(&ci->gadget);
spin_lock_irqsave(&ci->lock, flags);
pm_runtime_put(&ci->gadget.dev);
}
+ ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
return 0;
@@ -1784,54 +1803,15 @@ static int udc_start(struct ci_hdrc *ci)
ci->gadget.ep0 = &ci->ep0in->ep;
- if (ci->global_phy) {
- ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR(ci->transceiver))
- ci->transceiver = NULL;
- }
-
- if (ci->platdata->flags & CI_HDRC_REQUIRE_TRANSCEIVER) {
- if (ci->transceiver == NULL) {
- retval = -ENODEV;
- goto destroy_eps;
- }
- }
-
- if (ci->transceiver) {
- retval = otg_set_peripheral(ci->transceiver->otg,
- &ci->gadget);
- /*
- * If we implement all USB functions using chipidea drivers,
- * it doesn't need to call above API, meanwhile, if we only
- * use gadget function, calling above API is useless.
- */
- if (retval && retval != -ENOTSUPP)
- goto put_transceiver;
- }
-
retval = usb_add_gadget_udc(dev, &ci->gadget);
if (retval)
- goto remove_trans;
+ goto destroy_eps;
pm_runtime_no_callbacks(&ci->gadget.dev);
pm_runtime_enable(&ci->gadget.dev);
- /* Update ci->vbus_active */
- ci_handle_vbus_change(ci);
-
return retval;
-remove_trans:
- if (ci->transceiver) {
- otg_set_peripheral(ci->transceiver->otg, NULL);
- if (ci->global_phy)
- usb_put_phy(ci->transceiver);
- }
-
- dev_err(dev, "error = %i\n", retval);
-put_transceiver:
- if (ci->transceiver && ci->global_phy)
- usb_put_phy(ci->transceiver);
destroy_eps:
destroy_eps(ci);
free_pools:
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-04-27 05:40:17 +0000