diff options
Diffstat (limited to 'drivers/usb/chipidea')
| -rw-r--r-- | drivers/usb/chipidea/ci_hdrc_pci.c | 3 | ||||
| -rw-r--r-- | drivers/usb/chipidea/core.c | 2 | ||||
| -rw-r--r-- | drivers/usb/chipidea/host.c | 1 | ||||
| -rw-r--r-- | drivers/usb/chipidea/udc.c | 18 |
4 files changed, 21 insertions, 3 deletions
diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c index 241ae3444fd..4df66943721 100644 --- a/drivers/usb/chipidea/ci_hdrc_pci.c +++ b/drivers/usb/chipidea/ci_hdrc_pci.c @@ -111,6 +111,9 @@ static void ci_hdrc_pci_remove(struct pci_dev *pdev) * PCI device structure * * Check "pci.h" for details + * + * Note: ehci-pci driver may try to probe the device first. You have to add an + * ID to the bypass_pci_id_table in ehci-pci driver to prevent this. */ static const struct pci_device_id ci_hdrc_pci_id_table[] = { { diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 5b9825a4538..a57dc8866fc 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -669,7 +669,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (!ci) return -ENOMEM; - platform_set_drvdata(pdev, ci); ci->dev = dev; ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & @@ -783,6 +782,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) } } + platform_set_drvdata(pdev, ci); ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name, ci); if (ret) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index c1694cff1ea..48731d0bab3 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -91,6 +91,7 @@ static int host_start(struct ci_hdrc *ci) if (!hcd) return -ENOMEM; + dev_set_drvdata(ci->dev, ci); hcd->rsrc_start = ci->hw_bank.phys; hcd->rsrc_len = ci->hw_bank.size; hcd->regs = ci->hw_bank.abs; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 4fe18ce3bd5..ff451048c1a 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -819,8 +819,8 @@ __acquires(hwep->lock) } if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { - /* Assume that device is bus powered for now. */ - *(u16 *)req->buf = ci->remote_wakeup << 1; + *(u16 *)req->buf = (ci->remote_wakeup << 1) | + ci->gadget.is_selfpowered; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? @@ -1520,6 +1520,19 @@ static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma) return -ENOTSUPP; } +static int ci_udc_selfpowered(struct usb_gadget *_gadget, int is_on) +{ + struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); + struct ci_hw_ep *hwep = ci->ep0in; + unsigned long flags; + + spin_lock_irqsave(hwep->lock, flags); + _gadget->is_selfpowered = (is_on != 0); + spin_unlock_irqrestore(hwep->lock, flags); + + return 0; +} + /* Change Data+ pullup status * this func is used by usb_gadget_connect/disconnet */ @@ -1549,6 +1562,7 @@ static int ci_udc_stop(struct usb_gadget *gadget); static const struct usb_gadget_ops usb_gadget_ops = { .vbus_session = ci_udc_vbus_session, .wakeup = ci_udc_wakeup, + .set_selfpowered = ci_udc_selfpowered, .pullup = ci_udc_pullup, .vbus_draw = ci_udc_vbus_draw, .udc_start = ci_udc_start, |