diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 276 |
1 files changed, 204 insertions, 72 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f7b337feb3e..d20cb545a6e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -125,6 +125,12 @@ MODULE_PARM_DESC(use_both_schemes, "try the other device initialization scheme if the " "first one fails"); +/* Mutual exclusion for EHCI CF initialization. This interferes with + * port reset on some companion controllers. + */ +DECLARE_RWSEM(ehci_cf_port_reset_rwsem); +EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); + static inline char *portspeed(int portstatus) { @@ -347,11 +353,11 @@ void usb_kick_khubd(struct usb_device *hdev) static void hub_irq(struct urb *urb) { struct usb_hub *hub = urb->context; - int status; + int status = urb->status; int i; unsigned long bits; - switch (urb->status) { + switch (status) { case -ENOENT: /* synchronous unlink */ case -ECONNRESET: /* async unlink */ case -ESHUTDOWN: /* hardware going away */ @@ -359,10 +365,10 @@ static void hub_irq(struct urb *urb) default: /* presumably an error */ /* Cause a hub reset after 10 consecutive errors */ - dev_dbg (hub->intfdev, "transfer --> %d\n", urb->status); + dev_dbg (hub->intfdev, "transfer --> %d\n", status); if ((++hub->nerrors < 10) || hub->error) goto resubmit; - hub->error = urb->status; + hub->error = status; /* FALL THROUGH */ /* let khubd handle things */ @@ -1220,54 +1226,14 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) #endif /** - * usb_new_device - perform initial device setup (usbcore-internal) + * usb_configure_device_otg - FIXME (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors - * for any device configuration. The caller must have locked either - * the parent hub (if udev is a normal device) or else the - * usb_bus_list_lock (if udev is a root hub). The parent's pointer to - * udev has already been installed, but udev is not yet visible through - * sysfs or other filesystem code. - * - * It will return if the device is configured properly or not. Zero if - * the interface was registered with the driver core; else a negative - * errno value. - * - * This call is synchronous, and may not be used in an interrupt context. - * - * Only the hub driver or root-hub registrar should ever call this. + * Do configuration for On-The-Go devices */ -int usb_new_device(struct usb_device *udev) +static int usb_configure_device_otg(struct usb_device *udev) { - int err; - - /* Determine quirks */ - usb_detect_quirks(udev); - - err = usb_get_configuration(udev); - if (err < 0) { - dev_err(&udev->dev, "can't read configurations, error %d\n", - err); - goto fail; - } - - /* read the standard strings and cache them if present */ - udev->product = usb_cache_string(udev, udev->descriptor.iProduct); - udev->manufacturer = usb_cache_string(udev, - udev->descriptor.iManufacturer); - udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); - - /* Tell the world! */ - dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, " - "SerialNumber=%d\n", - udev->descriptor.iManufacturer, - udev->descriptor.iProduct, - udev->descriptor.iSerialNumber); - show_string(udev, "Product", udev->product); - show_string(udev, "Manufacturer", udev->manufacturer); - show_string(udev, "SerialNumber", udev->serial); + int err = 0; #ifdef CONFIG_USB_OTG /* @@ -1329,8 +1295,82 @@ int usb_new_device(struct usb_device *udev) err = -ENOTSUPP; goto fail; } +fail: #endif + return err; +} + + +/** + * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is only called by usb_new_device() and usb_authorize_device() + * and FIXME -- all comments that apply to them apply here wrt to + * environment. + * + * If the device is WUSB and not authorized, we don't attempt to read + * the string descriptors, as they will be errored out by the device + * until it has been authorized. + */ +static int usb_configure_device(struct usb_device *udev) +{ + int err; + if (udev->config == NULL) { + err = usb_get_configuration(udev); + if (err < 0) { + dev_err(&udev->dev, "can't read configurations, error %d\n", + err); + goto fail; + } + } + if (udev->wusb == 1 && udev->authorized == 0) { + udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); + udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); + udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); + } + else { + /* read the standard strings and cache them if present */ + udev->product = usb_cache_string(udev, udev->descriptor.iProduct); + udev->manufacturer = usb_cache_string(udev, + udev->descriptor.iManufacturer); + udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); + } + err = usb_configure_device_otg(udev); +fail: + return err; +} + + +/** + * usb_new_device - perform initial device setup (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is called with devices which have been enumerated, but not yet + * configured. The device descriptor is available, but not descriptors + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the + * usb_bus_list_lock (if udev is a root hub). The parent's pointer to + * udev has already been installed, but udev is not yet visible through + * sysfs or other filesystem code. + * + * It will return if the device is configured properly or not. Zero if + * the interface was registered with the driver core; else a negative + * errno value. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Only the hub driver or root-hub registrar should ever call this. + */ +int usb_new_device(struct usb_device *udev) +{ + int err; + + usb_detect_quirks(udev); /* Determine quirks */ + err = usb_configure_device(udev); /* detect & probe dev/intfs */ + if (err < 0) + goto fail; /* export the usbdev device-node for libusb */ udev->dev.devt = MKDEV(USB_DEVICE_MAJOR, (((udev->bus->busnum-1) * 128) + (udev->devnum-1))); @@ -1346,19 +1386,106 @@ int usb_new_device(struct usb_device *udev) err = device_add(&udev->dev); if (err) { dev_err(&udev->dev, "can't device_add, error %d\n", err); - if (udev->parent) - usb_autosuspend_device(udev->parent); goto fail; } -exit: + /* Tell the world! */ + dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, " + "SerialNumber=%d\n", + udev->descriptor.iManufacturer, + udev->descriptor.iProduct, + udev->descriptor.iSerialNumber); + show_string(udev, "Product", udev->product); + show_string(udev, "Manufacturer", udev->manufacturer); + show_string(udev, "SerialNumber", udev->serial); return err; fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); - goto exit; + return err; } + +/** + * Similar to usb_disconnect() + * + * We share a lock (that we have) with device_del(), so we need to + * defer its call. + */ +int usb_deauthorize_device(struct usb_device *usb_dev) +{ + unsigned cnt; + usb_lock_device(usb_dev); + if (usb_dev->authorized == 0) + goto out_unauthorized; + usb_dev->authorized = 0; + usb_set_configuration(usb_dev, -1); + usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); + usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); + usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->config); + usb_dev->config = NULL; + for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++) + kfree(usb_dev->rawdescriptors[cnt]); + usb_dev->descriptor.bNumConfigurations = 0; + kfree(usb_dev->rawdescriptors); +out_unauthorized: + usb_unlock_device(usb_dev); + return 0; +} + + +int usb_authorize_device(struct usb_device *usb_dev) +{ + int result = 0, c; + usb_lock_device(usb_dev); + if (usb_dev->authorized == 1) + goto out_authorized; + kfree(usb_dev->product); + usb_dev->product = NULL; + kfree(usb_dev->manufacturer); + usb_dev->manufacturer = NULL; + kfree(usb_dev->serial); + usb_dev->serial = NULL; + result = usb_autoresume_device(usb_dev); + if (result < 0) { + dev_err(&usb_dev->dev, + "can't autoresume for authorization: %d\n", result); + goto error_autoresume; + } + result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor)); + if (result < 0) { + dev_err(&usb_dev->dev, "can't re-read device descriptor for " + "authorization: %d\n", result); + goto error_device_descriptor; + } + usb_dev->authorized = 1; + result = usb_configure_device(usb_dev); + if (result < 0) + goto error_configure; + /* Choose and set the configuration. This registers the interfaces + * with the driver core and lets interface drivers bind to them. + */ + c = usb_choose_configuration(usb_dev); + if (c >= 0) { + result = usb_set_configuration(usb_dev, c); + if (result) { + dev_err(&usb_dev->dev, + "can't set config #%d, error %d\n", c, result); + /* This need not be fatal. The user can try to + * set other configurations. */ + } + } + dev_info(&usb_dev->dev, "authorized to connect\n"); +error_configure: +error_device_descriptor: +error_autoresume: +out_authorized: + usb_unlock_device(usb_dev); // complements locktree + return result; +} + + static int hub_port_status(struct usb_hub *hub, int port1, u16 *status, u16 *change) { @@ -1460,6 +1587,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1, { int i, status; + /* Block EHCI CF initialization during the port reset. + * Some companion controllers don't like it when they mix. + */ + down_read(&ehci_cf_port_reset_rwsem); + /* Reset the port */ for (i = 0; i < PORT_RESET_TRIES; i++) { status = set_port_feature(hub->hdev, @@ -1481,6 +1613,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, case 0: /* TRSTRCY = 10 ms; plus some extra */ msleep(10 + 40); + udev->devnum = 0; /* Device now at address 0 */ /* FALL THROUGH */ case -ENOTCONN: case -ENODEV: @@ -1490,7 +1623,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, usb_set_device_state(udev, status ? USB_STATE_NOTATTACHED : USB_STATE_DEFAULT); - return status; + goto done; } dev_dbg (hub->intfdev, @@ -1503,6 +1636,8 @@ static int hub_port_reset(struct usb_hub *hub, int port1, "Cannot enable port %i. Maybe the USB cable is bad?\n", port1); + done: + up_read(&ehci_cf_port_reset_rwsem); return status; } @@ -1833,14 +1968,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *udev; udev = hdev->children [port1-1]; - if (udev && msg.event == PM_EVENT_SUSPEND && -#ifdef CONFIG_USB_SUSPEND - udev->state != USB_STATE_SUSPENDED -#else - udev->dev.power.power_state.event - == PM_EVENT_ON -#endif - ) { + if (udev && udev->can_submit) { if (!hdev->auto_pm) dev_dbg(&intf->dev, "port %d nyet suspended\n", port1); @@ -1999,26 +2127,27 @@ static void ep0_reinit(struct usb_device *udev) { usb_disable_endpoint(udev, 0 + USB_DIR_IN); usb_disable_endpoint(udev, 0 + USB_DIR_OUT); - udev->ep_in[0] = udev->ep_out[0] = &udev->ep0; + usb_enable_endpoint(udev, &udev->ep0); } #define usb_sndaddr0pipe() (PIPE_CONTROL << 30) #define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) -static int hub_set_address(struct usb_device *udev) +static int hub_set_address(struct usb_device *udev, int devnum) { int retval; - if (udev->devnum == 0) + if (devnum <= 1) return -EINVAL; if (udev->state == USB_STATE_ADDRESS) return 0; if (udev->state != USB_STATE_DEFAULT) return -EINVAL; retval = usb_control_msg(udev, usb_sndaddr0pipe(), - USB_REQ_SET_ADDRESS, 0, udev->devnum, 0, + USB_REQ_SET_ADDRESS, 0, devnum, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); if (retval == 0) { + udev->devnum = devnum; /* Device now using proper address */ usb_set_device_state(udev, USB_STATE_ADDRESS); ep0_reinit(udev); } @@ -2045,6 +2174,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; char *speed, *type; + int devnum = udev->devnum; /* root hub ports have a slightly longer reset period * (from USB 2.0 spec, section 7.1.7.5) @@ -2074,7 +2204,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } oldspeed = udev->speed; - + /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ... * it's fixed size except for full speed devices. * For Wireless USB devices, ep0 max packet is always 512 (tho @@ -2115,7 +2245,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, dev_info (&udev->dev, "%s %s speed %sUSB device using %s and address %d\n", (udev->config) ? "reset" : "new", speed, type, - udev->bus->controller->driver->name, udev->devnum); + udev->bus->controller->driver->name, devnum); /* Set up TT records, if needed */ if (hdev->tt) { @@ -2202,7 +2332,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, } for (j = 0; j < SET_ADDRESS_TRIES; ++j) { - retval = hub_set_address(udev); + retval = hub_set_address(udev, devnum); if (retval >= 0) break; msleep(200); @@ -2210,7 +2340,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval < 0) { dev_err(&udev->dev, "device not accepting address %d, error %d\n", - udev->devnum, retval); + devnum, retval); goto fail; } @@ -2263,8 +2393,10 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, retval = 0; fail: - if (retval) + if (retval) { hub_port_disable(hub, port1, 0); + udev->devnum = devnum; /* for disconnect processing */ + } mutex_unlock(&usb_address0_mutex); return retval; } @@ -2699,9 +2831,9 @@ static void hub_events(void) clear_hub_feature(hdev, C_HUB_LOCAL_POWER); if (hubstatus & HUB_STATUS_LOCAL_POWER) /* FIXME: Is this always true? */ - hub->limited_power = 0; - else hub->limited_power = 1; + else + hub->limited_power = 0; } if (hubchange & HUB_CHANGE_OVERCURRENT) { dev_dbg (hub_dev, "overcurrent change\n"); |