diff options
Diffstat (limited to 'drivers/usb/core')
| -rw-r--r-- | drivers/usb/core/devices.c | 10 | ||||
| -rw-r--r-- | drivers/usb/core/hcd.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 14 |
3 files changed, 20 insertions, 8 deletions
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index a3d2e239965..96fdfb815f8 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -221,7 +221,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, break; case USB_ENDPOINT_XFER_INT: type = "Int."; - if (speed == USB_SPEED_HIGH) + if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER) interval = 1 << (desc->bInterval - 1); else interval = desc->bInterval; @@ -229,7 +229,8 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, default: /* "can't happen" */ return start; } - interval *= (speed == USB_SPEED_HIGH) ? 125 : 1000; + interval *= (speed == USB_SPEED_HIGH || + speed == USB_SPEED_SUPER) ? 125 : 1000; if (interval % 1000) unit = 'u'; else { @@ -542,8 +543,9 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, if (level == 0) { int max; - /* high speed reserves 80%, full/low reserves 90% */ - if (usbdev->speed == USB_SPEED_HIGH) + /* super/high speed reserves 80%, full/low reserves 90% */ + if (usbdev->speed == USB_SPEED_HIGH || + usbdev->speed == USB_SPEED_SUPER) max = 800; else max = FRAME_TIME_MAX_USECS_ALLOC; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 02b4dbfa488..77a7faec8d7 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) /* The USB 2.0 spec says 256 ms. This is close enough and won't * exceed that limit if HZ is 100. The math is more clunky than * maybe expected, this is to make sure that all timers for USB devices - * fire at the same time to give the CPU a break inbetween */ + * fire at the same time to give the CPU a break in between */ if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) : (length == 0 && hcd->status_urb != NULL)) mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); @@ -1908,7 +1908,7 @@ void usb_free_streams(struct usb_interface *interface, /* Streams only apply to bulk endpoints. */ for (i = 0; i < num_eps; i++) - if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) + if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc)) return; hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 564eaa5525d..93720bdc9ef 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev) /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. - * this quiesces everyting except pending urbs. + * this quiesces everything except pending urbs. */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); dev_info(&udev->dev, "USB disconnect, device number %d\n", @@ -2285,7 +2285,17 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) } /* see 7.1.7.6 */ - status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND); + /* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0 + * external hub. + * FIXME: this is a temporary workaround to make the system able + * to suspend/resume. + */ + if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev)) + status = clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_POWER); + else + status = set_port_feature(hub->hdev, port1, + USB_PORT_FEAT_SUSPEND); if (status) { dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", port1, status); |