summaryrefslogtreecommitdiffstats
path: root/drivers/usb/core
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core')
-rw-r--r--drivers/usb/core/devices.c13
-rw-r--r--drivers/usb/core/generic.c2
-rw-r--r--drivers/usb/core/hcd.c1
-rw-r--r--drivers/usb/core/hub.c266
-rw-r--r--drivers/usb/core/message.c2
-rw-r--r--drivers/usb/core/sysfs.c31
-rw-r--r--drivers/usb/core/usb.h9
7 files changed, 192 insertions, 132 deletions
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index cbacea933b1..e33224e2377 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -316,17 +316,23 @@ static char *usb_dump_iad_descriptor(char *start, char *end,
*/
static char *usb_dump_config_descriptor(char *start, char *end,
const struct usb_config_descriptor *desc,
- int active)
+ int active, int speed)
{
+ int mul;
+
if (start > end)
return start;
+ if (speed == USB_SPEED_SUPER)
+ mul = 8;
+ else
+ mul = 2;
start += sprintf(start, format_config,
/* mark active/actual/current cfg. */
active ? '*' : ' ',
desc->bNumInterfaces,
desc->bConfigurationValue,
desc->bmAttributes,
- desc->bMaxPower * 2);
+ desc->bMaxPower * mul);
return start;
}
@@ -342,7 +348,8 @@ static char *usb_dump_config(int speed, char *start, char *end,
if (!config)
/* getting these some in 2.3.7; none in 2.3.6 */
return start + sprintf(start, "(null Cfg. desc.)\n");
- start = usb_dump_config_descriptor(start, end, &config->desc, active);
+ start = usb_dump_config_descriptor(start, end, &config->desc, active,
+ speed);
for (i = 0; i < USB_MAXIADS; i++) {
if (config->intf_assoc[i] == NULL)
break;
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index eff2010eb63..271e761f563 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -100,7 +100,7 @@ int usb_choose_configuration(struct usb_device *udev)
*/
/* Rule out configs that draw too much bus current */
- if (c->desc.bMaxPower * 2 > udev->bus_mA) {
+ if (usb_get_max_power(udev, c) > udev->bus_mA) {
insufficient_power++;
continue;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 4225d5e7213..5f6da8b2d6a 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2506,7 +2506,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
}
/* starting here, usbcore will pay attention to this root hub */
- rhdev->bus_mA = min(500u, hcd->power_budget);
if ((retval = register_root_hub(hcd)) != 0)
goto err_register_root_hub;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 957ed2c4148..dc6ebd1d88d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1351,6 +1351,8 @@ static int hub_configure(struct usb_hub *hub,
unsigned int pipe;
int maxp, ret, i;
char *message = "out of memory";
+ unsigned unit_load;
+ unsigned full_load;
hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
if (!hub->buffer) {
@@ -1397,6 +1399,13 @@ static int hub_configure(struct usb_hub *hub,
}
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+ if (hub_is_superspeed(hdev)) {
+ unit_load = 150;
+ full_load = 900;
+ } else {
+ unit_load = 100;
+ full_load = 500;
+ }
/* FIXME for USB 3.0, skip for now */
if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
@@ -1516,40 +1525,44 @@ static int hub_configure(struct usb_hub *hub,
goto fail;
}
le16_to_cpus(&hubstatus);
+ hcd = bus_to_hcd(hdev->bus);
if (hdev == hdev->bus->root_hub) {
- if (hdev->bus_mA == 0 || hdev->bus_mA >= 500)
- hub->mA_per_port = 500;
+ if (hcd->power_budget > 0)
+ hdev->bus_mA = hcd->power_budget;
+ else
+ hdev->bus_mA = full_load * hdev->maxchild;
+ if (hdev->bus_mA >= full_load)
+ hub->mA_per_port = full_load;
else {
hub->mA_per_port = hdev->bus_mA;
hub->limited_power = 1;
}
} else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+ int remaining = hdev->bus_mA -
+ hub->descriptor->bHubContrCurrent;
+
dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
hub->descriptor->bHubContrCurrent);
hub->limited_power = 1;
- if (hdev->maxchild > 0) {
- int remaining = hdev->bus_mA -
- hub->descriptor->bHubContrCurrent;
- if (remaining < hdev->maxchild * 100)
- dev_warn(hub_dev,
+ if (remaining < hdev->maxchild * unit_load)
+ dev_warn(hub_dev,
"insufficient power available "
"to use all downstream ports\n");
- hub->mA_per_port = 100; /* 7.2.1.1 */
- }
+ hub->mA_per_port = unit_load; /* 7.2.1 */
+
} else { /* Self-powered external hub */
/* FIXME: What about battery-powered external hubs that
* provide less current per port? */
- hub->mA_per_port = 500;
+ hub->mA_per_port = full_load;
}
- if (hub->mA_per_port < 500)
+ if (hub->mA_per_port < full_load)
dev_dbg(hub_dev, "%umA bus power budget for each child\n",
hub->mA_per_port);
/* Update the HCD's internal representation of this hub before khubd
* starts getting port status changes for devices under the hub.
*/
- hcd = bus_to_hcd(hdev->bus);
if (hcd->driver->update_hub_device) {
ret = hcd->driver->update_hub_device(hcd, hdev,
&hub->tt, GFP_KERNEL);
@@ -2535,77 +2548,9 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
return ret;
/* The port state is unknown until the reset completes. */
- if ((portstatus & USB_PORT_STAT_RESET))
- goto delay;
-
- /*
- * Some buggy devices require a warm reset to be issued even
- * when the port appears not to be connected.
- */
- if (!warm) {
- /*
- * Some buggy devices can cause an NEC host controller
- * to transition to the "Error" state after a hot port
- * reset. This will show up as the port state in
- * "Inactive", and the port may also report a
- * disconnect. Forcing a warm port reset seems to make
- * the device work.
- *
- * See https://bugzilla.kernel.org/show_bug.cgi?id=41752
- */
- if (hub_port_warm_reset_required(hub, portstatus)) {
- int ret;
-
- if ((portchange & USB_PORT_STAT_C_CONNECTION))
- clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_CONNECTION);
- if (portchange & USB_PORT_STAT_C_LINK_STATE)
- clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_PORT_LINK_STATE);
- if (portchange & USB_PORT_STAT_C_RESET)
- clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_RESET);
- dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n",
- port1);
- ret = hub_port_reset(hub, port1,
- udev, HUB_BH_RESET_TIME,
- true);
- if ((portchange & USB_PORT_STAT_C_CONNECTION))
- clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_CONNECTION);
- return ret;
- }
- /* Device went away? */
- if (!(portstatus & USB_PORT_STAT_CONNECTION))
- return -ENOTCONN;
-
- /* bomb out completely if the connection bounced */
- if ((portchange & USB_PORT_STAT_C_CONNECTION))
- return -ENOTCONN;
-
- if ((portstatus & USB_PORT_STAT_ENABLE)) {
- if (hub_is_wusb(hub))
- udev->speed = USB_SPEED_WIRELESS;
- else if (hub_is_superspeed(hub->hdev))
- udev->speed = USB_SPEED_SUPER;
- else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
- udev->speed = USB_SPEED_HIGH;
- else if (portstatus & USB_PORT_STAT_LOW_SPEED)
- udev->speed = USB_SPEED_LOW;
- else
- udev->speed = USB_SPEED_FULL;
- return 0;
- }
- } else {
- if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
- hub_port_warm_reset_required(hub,
- portstatus))
- return -ENOTCONN;
-
- return 0;
- }
+ if (!(portstatus & USB_PORT_STAT_RESET))
+ break;
-delay:
/* switch to the long delay after two short delay failures */
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
@@ -2615,20 +2560,54 @@ delay:
port1, warm ? "warm " : "", delay);
}
- return -EBUSY;
+ if ((portstatus & USB_PORT_STAT_RESET))
+ return -EBUSY;
+
+ if (hub_port_warm_reset_required(hub, portstatus))
+ return -ENOTCONN;
+
+ /* Device went away? */
+ if (!(portstatus & USB_PORT_STAT_CONNECTION))
+ return -ENOTCONN;
+
+ /* bomb out completely if the connection bounced. A USB 3.0
+ * connection may bounce if multiple warm resets were issued,
+ * but the device may have successfully re-connected. Ignore it.
+ */
+ if (!hub_is_superspeed(hub->hdev) &&
+ (portchange & USB_PORT_STAT_C_CONNECTION))
+ return -ENOTCONN;
+
+ if (!(portstatus & USB_PORT_STAT_ENABLE))
+ return -EBUSY;
+
+ if (!udev)
+ return 0;
+
+ if (hub_is_wusb(hub))
+ udev->speed = USB_SPEED_WIRELESS;
+ else if (hub_is_superspeed(hub->hdev))
+ udev->speed = USB_SPEED_SUPER;
+ else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+ udev->speed = USB_SPEED_HIGH;
+ else if (portstatus & USB_PORT_STAT_LOW_SPEED)
+ udev->speed = USB_SPEED_LOW;
+ else
+ udev->speed = USB_SPEED_FULL;
+ return 0;
}
static void hub_port_finish_reset(struct usb_hub *hub, int port1,
- struct usb_device *udev, int *status, bool warm)
+ struct usb_device *udev, int *status)
{
switch (*status) {
case 0:
- if (!warm) {
- struct usb_hcd *hcd;
- /* TRSTRCY = 10 ms; plus some extra */
- msleep(10 + 40);
+ /* TRSTRCY = 10 ms; plus some extra */
+ msleep(10 + 40);
+ if (udev) {
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
update_devnum(udev, 0);
- hcd = bus_to_hcd(udev->bus);
/* The xHC may think the device is already reset,
* so ignore the status.
*/
@@ -2640,14 +2619,15 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
case -ENODEV:
clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_C_RESET);
- /* FIXME need disconnect() for NOTATTACHED device */
if (hub_is_superspeed(hub->hdev)) {
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_PORT_LINK_STATE);
+ clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_CONNECTION);
}
- if (!warm)
+ if (udev)
usb_set_device_state(udev, *status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
@@ -2660,18 +2640,30 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm)
{
int i, status;
+ u16 portchange, portstatus;
- if (!warm) {
- /* Block EHCI CF initialization during the port reset.
- * Some companion controllers don't like it when they mix.
- */
- down_read(&ehci_cf_port_reset_rwsem);
- } else {
- if (!hub_is_superspeed(hub->hdev)) {
+ if (!hub_is_superspeed(hub->hdev)) {
+ if (warm) {
dev_err(hub->intfdev, "only USB3 hub support "
"warm reset\n");
return -EINVAL;
}
+ /* Block EHCI CF initialization during the port reset.
+ * Some companion controllers don't like it when they mix.
+ */
+ down_read(&ehci_cf_port_reset_rwsem);
+ } else if (!warm) {
+ /*
+ * If the caller hasn't explicitly requested a warm reset,
+ * double check and see if one is needed.
+ */
+ status = hub_port_status(hub, port1,
+ &portstatus, &portchange);
+ if (status < 0)
+ goto done;
+
+ if (hub_port_warm_reset_required(hub, portstatus))
+ warm = true;
}
/* Reset the port */
@@ -2692,10 +2684,33 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
status);
}
- /* return on disconnect or reset */
+ /* Check for disconnect or reset */
if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
- hub_port_finish_reset(hub, port1, udev, &status, warm);
- goto done;
+ hub_port_finish_reset(hub, port1, udev, &status);
+
+ if (!hub_is_superspeed(hub->hdev))
+ goto done;
+
+ /*
+ * If a USB 3.0 device migrates from reset to an error
+ * state, re-issue the warm reset.
+ */
+ if (hub_port_status(hub, port1,
+ &portstatus, &portchange) < 0)
+ goto done;
+
+ if (!hub_port_warm_reset_required(hub, portstatus))
+ goto done;
+
+ /*
+ * If the port is in SS.Inactive or Compliance Mode, the
+ * hot or warm reset failed. Try another warm reset.
+ */
+ if (!warm) {
+ dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n",
+ port1);
+ warm = true;
+ }
}
dev_dbg (hub->intfdev,
@@ -2709,7 +2724,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
port1);
done:
- if (!warm)
+ if (!hub_is_superspeed(hub->hdev))
up_read(&ehci_cf_port_reset_rwsem);
return status;
@@ -2945,9 +2960,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
/* see 7.1.7.6 */
if (hub_is_superspeed(hub->hdev))
- status = set_port_feature(hub->hdev,
- port1 | (USB_SS_PORT_LS_U3 << 3),
- USB_PORT_FEAT_LINK_STATE);
+ status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
else
status = set_port_feature(hub->hdev, port1,
USB_PORT_FEAT_SUSPEND);
@@ -3123,9 +3136,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
/* see 7.1.7.7; affects power usage, but not budgeting */
if (hub_is_superspeed(hub->hdev))
- status = set_port_feature(hub->hdev,
- port1 | (USB_SS_PORT_LS_U0 << 3),
- USB_PORT_FEAT_LINK_STATE);
+ status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0);
else
status = clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
@@ -4212,16 +4223,23 @@ hub_power_remaining (struct usb_hub *hub)
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
struct usb_device *udev = hub->ports[port1 - 1]->child;
int delta;
+ unsigned unit_load;
if (!udev)
continue;
+ if (hub_is_superspeed(udev))
+ unit_load = 150;
+ else
+ unit_load = 100;
- /* Unconfigured devices may not use more than 100mA,
- * or 8mA for OTG ports */
+ /*
+ * Unconfigured devices may not use more than one unit load,
+ * or 8mA for OTG ports
+ */
if (udev->actconfig)
- delta = udev->actconfig->desc.bMaxPower * 2;
+ delta = usb_get_max_power(udev, udev->actconfig);
else if (port1 != udev->bus->otg_port || hdev->parent)
- delta = 100;
+ delta = unit_load;
else
delta = 8;
if (delta > hub->mA_per_port)
@@ -4256,6 +4274,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
le16_to_cpu(hub->descriptor->wHubCharacteristics);
struct usb_device *udev;
int status, i;
+ unsigned unit_load;
dev_dbg (hub_dev,
"port %d, status %04x, change %04x, %s\n",
@@ -4345,6 +4364,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
goto done;
return;
}
+ if (hub_is_superspeed(hub->hdev))
+ unit_load = 150;
+ else
+ unit_load = 100;
for (i = 0; i < SET_CONFIG_TRIES; i++) {
@@ -4392,7 +4415,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
* on the parent.
*/
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB
- && udev->bus_mA <= 100) {
+ && udev->bus_mA <= unit_load) {
u16 devstat;
status = usb_get_status(udev, USB_RECIP_DEVICE, 0,
@@ -4706,12 +4729,21 @@ static void hub_events(void)
*/
if (hub_port_warm_reset_required(hub, portstatus)) {
int status;
+ struct usb_device *udev =
+ hub->ports[i - 1]->child;
dev_dbg(hub_dev, "warm reset port %d\n", i);
- status = hub_port_reset(hub, i, NULL,
- HUB_BH_RESET_TIME, true);
- if (status < 0)
- hub_port_disable(hub, i, 1);
+ if (!udev) {
+ status = hub_port_reset(hub, i,
+ NULL, HUB_BH_RESET_TIME,
+ true);
+ if (status < 0)
+ hub_port_disable(hub, i, 1);
+ } else {
+ usb_lock_device(udev);
+ status = usb_reset_device(udev);
+ usb_unlock_device(udev);
+ }
connect_change = 0;
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 131f73649b6..444d30e3a78 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1751,7 +1751,7 @@ free_interfaces:
}
}
- i = dev->bus_mA - cp->desc.bMaxPower * 2;
+ i = dev->bus_mA - usb_get_max_power(dev, cp);
if (i < 0)
dev_warn(&dev->dev, "new config #%d exceeds power "
"limit by %dmA\n",
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 818e4a024d0..3f81a3dc686 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -17,7 +17,7 @@
#include "usb.h"
/* Active configuration fields */
-#define usb_actconfig_show(field, multiplier, format_string) \
+#define usb_actconfig_show(field, format_string) \
static ssize_t show_##field(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
@@ -28,18 +28,31 @@ static ssize_t show_##field(struct device *dev, \
actconfig = udev->actconfig; \
if (actconfig) \
return sprintf(buf, format_string, \
- actconfig->desc.field * multiplier); \
+ actconfig->desc.field); \
else \
return 0; \
} \
-#define usb_actconfig_attr(field, multiplier, format_string) \
-usb_actconfig_show(field, multiplier, format_string) \
-static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
+#define usb_actconfig_attr(field, format_string) \
+ usb_actconfig_show(field, format_string) \
+ static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
+
+usb_actconfig_attr(bNumInterfaces, "%2d\n")
+usb_actconfig_attr(bmAttributes, "%2x\n")
-usb_actconfig_attr(bNumInterfaces, 1, "%2d\n")
-usb_actconfig_attr(bmAttributes, 1, "%2x\n")
-usb_actconfig_attr(bMaxPower, 2, "%3dmA\n")
+static ssize_t show_bMaxPower(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_device *udev;
+ struct usb_host_config *actconfig;
+
+ udev = to_usb_device(dev);
+ actconfig = udev->actconfig;
+ if (!actconfig)
+ return 0;
+ return sprintf(buf, "%dmA\n", usb_get_max_power(udev, actconfig));
+}
+static DEVICE_ATTR(bMaxPower, S_IRUGO, show_bMaxPower, NULL);
static ssize_t show_configuration_string(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -56,7 +69,7 @@ static ssize_t show_configuration_string(struct device *dev,
static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL);
/* configuration value is always present, and r/w */
-usb_actconfig_show(bConfigurationValue, 1, "%u\n");
+usb_actconfig_show(bConfigurationValue, "%u\n");
static ssize_t
set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 1c528c1bf0b..fb7d8fcb455 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -38,6 +38,15 @@ extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern int usb_choose_configuration(struct usb_device *udev);
+static inline unsigned usb_get_max_power(struct usb_device *udev,
+ struct usb_host_config *c)
+{
+ /* SuperSpeed power is in 8 mA units; others are in 2 mA units */
+ unsigned mul = (udev->speed == USB_SPEED_SUPER ? 8 : 2);
+
+ return c->desc.bMaxPower * mul;
+}
+
extern void usb_kick_khubd(struct usb_device *dev);
extern int usb_match_one_id_intf(struct usb_device *dev,
struct usb_host_interface *intf,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-22 11:19:15 +0000